void rcs_loadParams()
{
prm_add("S0 lower limit", PRM_FLAG_SIGNED,
"@c Servo Sets the lower limit of travel for S0 (default -200)", INT16(-200), END);
prm_add("S0 upper limit", PRM_FLAG_SIGNED,
"@c Servo Sets the upper limit of travel for S0 (default 200)", INT16(200), END);
prm_add("S1 lower limit", PRM_FLAG_SIGNED,
"@c Servo Sets the lower limit of travel for S1 (default -200)", INT16(-200), END);
prm_add("S1 upper limit", PRM_FLAG_SIGNED,
"@c Servo Sets the upper limit of travel for S1 (default 200)", INT16(200), END);
prm_add("Servo frequency", PRM_FLAG_ADVANCED,
"@c Servo Sets the PWM frequency of the servos (default 100)", UINT16(100), END);
int16_t lower, upper, freq;
prm_get("S0 lower limit", &lower, END);
prm_get("S0 upper limit", &upper, END);
rcs_setLimits(0, lower, upper);
prm_get("S1 lower limit", &lower, END);
prm_get("S1 upper limit", &upper, END);
rcs_setLimits(1, lower, upper);
prm_get("Servo frequency", &freq, END);
rcs_setFreq(freq);
}
int main(void)
{
// pixyInit(SRAM3_LOC, &LR0[0], sizeof(LR0));
#if 0
pixyInit();
cc_init(g_chirpUsb);
ser_init();
exec_init(g_chirpUsb);
#endif
#if 1 /* test loop */
pixyInit();
exec_init(g_chirpUsb);
#if 0
int i = 0;
cam_setMode(1);
while(1)
{
//uint8_t reg = cam_getRegister(0x0a);
g_chirpUsb->service();
cprintf("hello world %d\n", i++);
}
#endif
#if 0
while(1)
{
uint8_t *frame = (uint8_t *)SRAM1_LOC;
int res;
res = cam_getFrame(frame, SRAM1_SIZE, CAM_GRAB_M1R2, 0, 0, CAM_RES2_WIDTH, CAM_RES2_HEIGHT);
i++;
if (i%50==0)
{
lpc_printf("%d\n", i);
}
}
#endif
#endif
#if 1
exec_addProg(&g_progBlobs);
ptLoadParams();
exec_addProg(&g_progPt);
exec_addProg(&g_progVideo, true);
exec_loop();
#endif
#if 0
//prm_format();
ColorModel model, *model2;
uint32_t len;
model.m_hue[0].m_slope = 1.0;
model.m_hue[0].m_yi = 2.0;
model.m_hue[1].m_slope = 3.0;
model.m_hue[1].m_yi = 4.0;
model.m_sat[0].m_slope = 5.0;
model.m_sat[0].m_yi = 6.0;
model.m_sat[1].m_slope = 7.0;
model.m_sat[1].m_yi = 8.0;
prm_add("signature1", "Color signature 1", INTS8(sizeof(ColorModel), &model), END);
prm_set("signature1", INTS8(sizeof(ColorModel), &model), END);
model.m_hue[0].m_slope = 9.0;
model.m_hue[0].m_yi = 10.0;
model.m_hue[1].m_slope = 11.0;
model.m_hue[1].m_yi = 12.0;
model.m_sat[0].m_slope = 13.0;
model.m_sat[0].m_yi = 14.0;
model.m_sat[1].m_slope = 15.0;
model.m_sat[1].m_yi = 16.0;
prm_add("signature2", "Color signature 2", INTS8(sizeof(ColorModel), &model), END);
prm_set("signature2", INTS8(sizeof(ColorModel), &model), END);
prm_get("signature1", &len, &model2, END);
model.m_hue[0].m_slope = 17.0;
model.m_hue[0].m_yi = 18.0;
model.m_hue[1].m_slope = 19.0;
model.m_hue[1].m_yi = 20.0;
model.m_sat[0].m_slope = 21.0;
model.m_sat[0].m_yi = 22.0;
model.m_sat[1].m_slope = 23.0;
model.m_sat[1].m_yi = 24.0;
prm_get("signature1", &len, &model2, END);
prm_set("signature1", INTS8(sizeof(ColorModel), &model), END);
prm_get("signature1", &len, &model2, END);
prm_get("signature2", &len, &model2, END);
#endif
#if 0
#define DELAY 1000000
rcs_setFreq(100);
rcs_setLimits(0, -200, 200);
rcs_setLimits(1, -200, 200);
while(1)
{
rcs_setPos(0, 0);
delayus(DELAY);
rcs_setPos(0, 500);
delayus(DELAY);
rcs_setPos(0, 1000);
delayus(DELAY);
rcs_setPos(1, 0);
delayus(DELAY);
rcs_setPos(1, 500);
delayus(DELAY);
rcs_setPos(1, 1000);
delayus(DELAY);
}
#endif
#if 0
while(1)
{
g_chirpUsb->service();
handleButton();
}
#endif
}
int main(void)
{
uint16_t major, minor, build;
int i, res, count;
// main init of hardware plus a version-dependent number for the parameters that will
// force a format of parameter between version numbers.
pixyInit(SRAM3_LOC, &LR0[0], sizeof(LR0));
cc_init(g_chirpUsb);
ser_init();
exec_init(g_chirpUsb);
// load programs
exec_addProg(&g_progBlobs);
ptLoadParams();
exec_addProg(&g_progPt);
#if 0
chaseLoadParams();
exec_addProg(&g_progChase);
#endif
exec_addProg(&g_progVideo, true);
// this code formats if the version has changed
for (i=0, count=0; i<25; i++)
{
res = prm_get("fwver", &major, &minor, &build, END);
if (res>=0 && major==FW_MAJOR_VER && minor==FW_MINOR_VER && build==FW_BUILD_VER)
count++;
}
if (count==0)
prm_format();
// check version
prm_add("fwver", PRM_FLAG_INTERNAL, "", UINT16(FW_MAJOR_VER), UINT16(FW_MINOR_VER), UINT16(FW_BUILD_VER), END);
ser_setInterface(SER_INTERFACE_UART);
rcs_setLimits(1, -250, 250); // extends servo range to maximum//0x__BBRRGG
//28 == full back, 12 == full angle down, 22 == parallel
uint8_t WBV_sub = 0x16;
uint32_t WBV = WBV_sub | WBV_sub << 8 | WBV_sub << 16;
cam_setWBV(WBV); // sets the white balance manually
cam_setAEC(0); // turns off auto exposure correction
cam_setBrightness(35); // sets the brightness
while(1) {
//edgeDetect_highres_run();
edgeDetect_run(); // run the main edgeDetect function
//exec_loop(); // Debug through pixymon
}
#if 0
#define DELAY 1000000
rcs_setFreq(100);
rcs_setLimits(0, -200, 200);
rcs_setLimits(1, -200, 200);
while(1)
{
rcs_setPos(0, 0);
delayus(DELAY);
rcs_setPos(0, 500);
delayus(DELAY);
rcs_setPos(0, 1000);
delayus(DELAY);
rcs_setPos(1, 0);
delayus(DELAY);
rcs_setPos(1, 500);
delayus(DELAY);
rcs_setPos(1, 1000);
delayus(DELAY);
}
#endif
#if 0
while(1)
{
g_chirpUsb->service();
handleButton();
}
#endif
}
int main(void)
{
uint16_t major, minor, build;
char *type;
int i, res, count, count2;
volatile uint32_t d;
// insert a small delay so power supply can stabilize
for (d=0; d<2500000; d++);
#ifdef KEIL
pixyInit(SRAM3_LOC, &LR0[0], sizeof(LR0));
#else
pixyInit();
#endif
#if 0
i = 0;
char *foo;
while(1)
{
foo = new (std::nothrow) char[128];
if (foo==NULL)
{
_DBG("full\n");
break;
}
else
{
_DBH32((int)foo); _DBG(" "); _DBH32(i); _DBG("\n");
}
i++;
}
while(1);
#endif
// main init of hardware plus a version-dependent number for the parameters that will
// force a format of parameter between version numbers.
#ifndef LEGO
rcs_init();
#endif
cc_init(g_chirpUsb);
ser_init();
exec_init(g_chirpUsb);
#if 0
exec_addProg(&g_progBlobs);
ptLoadParams();
exec_addProg(&g_progPt);
exec_addProg(&g_progVideo, true);
#if 0
cam_setMode(CAM_MODE1);
while(1)
periodic();
#endif
#endif
#if 1
// load programs
exec_addProg(&g_progBlobs);
#ifndef LEGO
// need to call this to get the pan/tilt parameters to display.
// We can make some properties modal, meaning they are only diaplayed when the program is running.
// We might want to do this here, but this is good for now.
ptLoadParams();
exec_addProg(&g_progPt);
#endif
#if 0
chaseLoadParams();
exec_addProg(&g_progChase);
#endif
exec_addProg(&g_progVideo, true);
#if 1
// this code formats if the version has changed
for (i=0, count=0, count2=0; i<25; i++)
{
res = prm_get("fwver", &major, &minor, &build, END);
if (res>=0 && major==FW_MAJOR_VER && minor==FW_MINOR_VER && build==FW_BUILD_VER)
count++;
res = prm_get("fwtype", &type, END);
if (res>=0 && strcmp(type, FW_TYPE)==0)
count2++;
}
if (count==0 || count2==0)
prm_format();
#endif
// check version
prm_add("fwver", PRM_FLAG_INTERNAL, "", UINT16(FW_MAJOR_VER), UINT16(FW_MINOR_VER), UINT16(FW_BUILD_VER), END);
prm_add("fwtype", PRM_FLAG_INTERNAL, "", STRING(FW_TYPE), END);
exec_loop();
#endif
#if 0
#define DELAY 1000000
rcs_setFreq(100);
rcs_setLimits(0, -200, 200);
rcs_setLimits(1, -200, 200);
while(1)
{
rcs_setPos(0, 0);
delayus(DELAY);
rcs_setPos(0, 500);
delayus(DELAY);
rcs_setPos(0, 1000);
delayus(DELAY);
rcs_setPos(1, 0);
delayus(DELAY);
rcs_setPos(1, 500);
delayus(DELAY);
rcs_setPos(1, 1000);
delayus(DELAY);
}
#endif
#if 0
while(1)
{
g_chirpUsb->service();
handleButton();
}
#endif
}
