/*!
\brief reset GPIO port
\param[in] gpio_periph: GPIOx(x = A,B,C,F)
only one parameter can be selected which is shown as below:
\arg GPIOx(x = A,B,C,F)
\param[out] none
\retval none
*/
void gpio_deinit(uint32_t gpio_periph)
{
switch(gpio_periph){
case GPIOA:
/* reset GPIOA */
rcu_periph_reset_enable(RCU_GPIOARST);
rcu_periph_reset_disable(RCU_GPIOARST);
break;
case GPIOB:
/* reset GPIOB */
rcu_periph_reset_enable(RCU_GPIOBRST);
rcu_periph_reset_disable(RCU_GPIOBRST);
break;
case GPIOC:
/* reset GPIOC */
rcu_periph_reset_enable(RCU_GPIOCRST);
rcu_periph_reset_disable(RCU_GPIOCRST);
break;
case GPIOF:
/* reset GPIOF */
rcu_periph_reset_enable(RCU_GPIOFRST);
rcu_periph_reset_disable(RCU_GPIOFRST);
break;
default:
break;
}
}
/*!
\brief reset USART
\param[in] usart_periph: USARTx(x=0,1)
\param[out] none
\retval none
*/
void usart_deinit(uint32_t usart_periph)
{
switch(usart_periph){
case USART0:
rcu_periph_reset_enable(RCU_USART0RST);
rcu_periph_reset_disable(RCU_USART0RST);
break;
case USART1:
rcu_periph_reset_enable(RCU_USART1RST);
rcu_periph_reset_disable(RCU_USART1RST);
break;
default:
break;
}
}
/** Reset I2C peripheral by hardware method. Most of the implementation enable RCU reset.
*
* @param obj The I2C object
*/
static void i2c_hw_reset(i2c_t *obj)
{
struct i2c_s *obj_s = I2C_S(obj);
switch (obj_s->i2c) {
case I2C_0:
rcu_periph_reset_enable(RCU_I2C0RST);
rcu_periph_reset_disable(RCU_I2C0RST);
break;
case I2C_1:
rcu_periph_reset_enable(RCU_I2C1RST);
rcu_periph_reset_disable(RCU_I2C1RST);
break;
}
}
/*!
\brief reset I2C
\param[in] i2c_periph: I2Cx(x=0,1)
\param[out] none
\retval none
*/
void i2c_deinit(uint32_t i2c_periph)
{
switch (i2c_periph) {
case I2C0:
/* reset I2C0 */
rcu_periph_reset_enable(RCU_I2C0RST);
rcu_periph_reset_disable(RCU_I2C0RST);
break;
case I2C1:
/* reset I2C1 */
rcu_periph_reset_enable(RCU_I2C1RST);
rcu_periph_reset_disable(RCU_I2C1RST);
break;
default:
break;
}
}
/*!
\brief deinitialize CAN
\param[in] can_periph
\arg CANx(x=0,1),the CAN1 only for GD32F30X_CL
\param[out] none
\retval none
*/
void can_deinit(uint32_t can_periph)
{
#ifdef GD32F30X_CL
if(CAN0 == can_periph){
rcu_periph_reset_enable(RCU_CAN0RST);
rcu_periph_reset_disable(RCU_CAN0RST);
}else{
rcu_periph_reset_enable(RCU_CAN1RST);
rcu_periph_reset_disable(RCU_CAN1RST);
}
#else
if(CAN0 == can_periph){
rcu_periph_reset_enable(RCU_CAN0RST);
rcu_periph_reset_disable(RCU_CAN0RST);
}
#endif
}
/*!
\brief reset GPIO port
\param[in] port
\arg GPIOx(x = A,B,C,D,F)
\param[out] none
\retval none
*/
void gpio_deinit(uint32_t port)
{
if(GPIOA == port){
rcu_periph_reset_enable(RCU_GPIOARST);
rcu_periph_reset_disable(RCU_GPIOARST);
}else if(GPIOB == port){
rcu_periph_reset_enable(RCU_GPIOBRST);
rcu_periph_reset_disable(RCU_GPIOBRST);
}else if(GPIOC == port){
rcu_periph_reset_enable(RCU_GPIOCRST);
rcu_periph_reset_disable(RCU_GPIOCRST);
}else if(GPIOD == port){
rcu_periph_reset_enable(RCU_GPIODRST);
rcu_periph_reset_disable(RCU_GPIOCRST);
}else if(GPIOF == port){
rcu_periph_reset_enable(RCU_GPIOFRST);
rcu_periph_reset_disable(RCU_GPIOFRST);
}
}
/*!
\brief deinitialize SPI and I2S
\param[in] spi_periph: SPIx(x=0,1,2,3,4,5),include I2S1_ADD and I2S2_ADD
\param[out] none
\retval none
*/
void spi_i2s_deinit(uint32_t spi_periph)
{
switch (spi_periph) {
case SPI0:
/* reset SPI0 */
rcu_periph_reset_enable(RCU_SPI0RST);
rcu_periph_reset_disable(RCU_SPI0RST);
break;
case SPI1:
/* reset SPI1,I2S1 and I2S1_ADD */
rcu_periph_reset_enable(RCU_SPI1RST);
rcu_periph_reset_disable(RCU_SPI1RST);
break;
case SPI2:
/* reset SPI2,I2S2 and I2S2_ADD */
rcu_periph_reset_enable(RCU_SPI2RST);
rcu_periph_reset_disable(RCU_SPI2RST);
break;
case SPI3:
/* reset SPI3 */
rcu_periph_reset_enable(RCU_SPI3RST);
rcu_periph_reset_disable(RCU_SPI3RST);
break;
case SPI4:
/* reset SPI4 */
rcu_periph_reset_enable(RCU_SPI4RST);
rcu_periph_reset_disable(RCU_SPI4RST);
break;
case SPI5:
/* reset SPI5 */
rcu_periph_reset_enable(RCU_SPI5RST);
rcu_periph_reset_disable(RCU_SPI5RST);
break;
default :
break;
}
}
/*!
\brief deinit IVREF
\param[in] none
\param[out] none
\retval none
*/
void ivref_deinit(void)
{
rcu_periph_reset_enable(RCU_OPAIVREFRST);
rcu_periph_reset_disable(RCU_OPAIVREFRST);
}
/*!
\brief deinitialize DAC
\param[in] none
\param[out] none
\retval none
*/
void dac_deinit(void)
{
rcu_periph_reset_enable(RCU_DACRST);
rcu_periph_reset_disable(RCU_DACRST);
}
/*!
\brief deinitialize IPA registers
\param[in] none
\param[out] none
\retval none
*/
void ipa_deinit(void)
{
rcu_periph_reset_enable(RCU_IPAENRST);
rcu_periph_reset_disable(RCU_IPAENRST);
}
/*!
\brief deinitialize the SDIO
\param[in] none
\param[out] none
\retval none
*/
void sdio_deinit(void)
{
rcu_periph_reset_enable(RCU_SDIORST);
rcu_periph_reset_disable(RCU_SDIORST);
}
/*!
\brief reset the window watchdog timer configuration
\param[in] none
\param[out] none
\retval none
*/
void wwdgt_deinit(void)
{
rcu_periph_reset_enable(RCU_WWDGTRST);
rcu_periph_reset_disable(RCU_WWDGTRST);
}
/*!
\brief reset CTC clock trim controller
\param[in] none
\param[out] none
\retval none
*/
void ctc_deinit(void)
{
/* reset CTC */
rcu_periph_reset_enable(RCU_CTCRST);
rcu_periph_reset_disable(RCU_CTCRST);
}