// ------------------------------------------------------------------
// setupPnorInfo
// ------------------------------------------------------------------
void ErrlManager::setupPnorInfo()
{
TRACFCOMP( g_trac_errl, ENTER_MRK"setupPnorInfo" );
do
{
// Get SPD PNOR section info from PNOR RP
PNOR::SectionInfo_t info;
errlHndl_t err = PNOR::getSectionInfo( PNOR::HB_ERRLOGS, info );
if (err)
{
TRACFCOMP( g_trac_errl, INFO_MRK"setupPnorInfo getSectionInfo failed");
assert(err == NULL);
break;
}
TRACFCOMP( g_trac_errl, INFO_MRK"setupPnorInfo sectionInfo id %d name \"%s\" size %d",
info.id, info.name, info.size );
// Set the globals appropriately
iv_pnorAddr = reinterpret_cast<char *> (info.vaddr);
iv_maxErrlInPnor = info.size / PNOR_ERROR_LENGTH;
TRACFCOMP( g_trac_errl, INFO_MRK"setupPnorInfo iv_pnorAddr %p maxErrlInPnor %d",
iv_pnorAddr, iv_maxErrlInPnor );
// initial value, in case PNOR is empty - start at this end slot
// so that our first save will increment and wrap correctly
iv_pnorOpenSlot = (iv_maxErrlInPnor - 1);
// walk thru memory, finding error logs and determine the highest ID
uint32_t l_maxId = 0;
for (uint32_t i = 0; i < iv_maxErrlInPnor; i++)
{
if (!isSlotEmpty(i))
{
uint32_t l_id = readEidFromFlattened(i);
// If id is not from HB (0x9XXXXXXX) grab plid instead
if ( (l_id & FIRST_BYTE_ERRLOG) != ERRLOG_PLID_BASE )
{
l_id = readPlidFromFlattened(i);
}
if (l_id > l_maxId )
{
l_maxId = l_id;
// set this - start at this 'max' slot so that our first
// save will increment correctly
iv_pnorOpenSlot = i;
}
// also check if it's ACKed or not
if (!isSlotACKed(i))
{
TRACFCOMP( g_trac_errl,
INFO_MRK"setupPnorInfo slot %d eid %.8X was not ACKed.",
i, l_id);
#ifdef CONFIG_BMC_IPMI
// for IPMI systems, unflatten to send down to the BMC
err = new ERRORLOG::ErrlEntry(
ERRORLOG::ERRL_SEV_UNRECOVERABLE, 0,0);
char *l_errlAddr = iv_pnorAddr + (PNOR_ERROR_LENGTH * i);
uint64_t rc = err->unflatten(l_errlAddr, PNOR_ERROR_LENGTH);
if (rc != 0)
{
// unflatten didn't work, nothing we can do
TRACFCOMP( g_trac_errl,
ERR_MRK"setupPnorInfo unflatten failed on slot %d eid %.8X.",
i, l_id);
}
else
{
if (iv_isIpmiEnabled)
{
// convert to SEL/eSEL and send to BMC over IPMI
sendErrLogToBmc(err);
delete err;
}
else
{
TRACFCOMP( g_trac_errl,
INFO_MRK"setupPnorInfo pushing slot %d eid %.8X to iv_errList.",
i, l_id);
// Pair with IPMI flag to add to the errlList
// so that it'll get sent down when IPMI is up
ErrlFlagPair_t l_pair(err, IPMI_FLAG);
iv_errlList.push_back(l_pair);
}
}
#else
// for FSP system, this shouldn't ever happen.
#endif
setACKInFlattened(i);
} // not ACKed
} // not empty
} // for
// bump the current eid to 1 past the max eid found
while (!__sync_bool_compare_and_swap(&iv_currLogId, iv_currLogId,
(iv_currLogId & ERRLOG_PLID_BASE_MASK) +
(l_maxId & ERRLOG_PLID_MASK) + 1));
TRACFCOMP( g_trac_errl, INFO_MRK"setupPnorInfo reseting LogId 0x%X", iv_currLogId);
// if error(s) came in before PNOR was ready,
// the error log(s) would be on this list. save now.
ErrlListItr_t it = iv_errlList.begin();
while(it != iv_errlList.end())
{
// Check if PNOR processing is needed
if (_isFlagSet(*it, PNOR_FLAG))
{
//ACK it if no one is there to receive
bool l_savedToPnor = saveErrLogToPnor(it->first);
// check if we actually saved the msg to PNOR
if (l_savedToPnor)
{
// Mark PNOR processing complete
_clearFlag(*it, PNOR_FLAG);
_updateErrlListIter(it);
}
else
{
// still couldn't save it (PNOR maybe full) so
// it's still on the list.
break; // get out of this while loop.
}
}
else
{
++it;
}
}
} while (0);
TRACFCOMP( g_trac_errl, EXIT_MRK"setupPnorInfo");
} // setupPnorInfo
// ------------------------------------------------------------------
// setupPnorInfo
// ------------------------------------------------------------------
void ErrlManager::setupPnorInfo()
{
TRACFCOMP( g_trac_errl, ENTER_MRK"setupPnorInfo" );
do
{
// Get SPD PNOR section info from PNOR RP
PNOR::SectionInfo_t info;
errlHndl_t err = PNOR::getSectionInfo( PNOR::HB_ERRLOGS, info );
if (err)
{
TRACFCOMP( g_trac_errl, INFO_MRK"setupPnorInfo getSectionInfo failed");
assert(err == NULL);
break;
}
TRACFCOMP( g_trac_errl, INFO_MRK"setupPnorInfo sectionInfo id %d name \"%s\" size %d",
info.id, info.name, info.size );
// Set the globals appropriately
iv_pnorAddr = reinterpret_cast<char *> (info.vaddr);
iv_maxErrlInPnor = info.size / PNOR_ERROR_LENGTH;
TRACFCOMP( g_trac_errl, INFO_MRK"setupPnorInfo iv_pnorAddr %p maxErrlInPnor %d",
iv_pnorAddr, iv_maxErrlInPnor );
// initial value, in case PNOR is empty - start at this end slot
// so that our first save will increment and wrap correctly
iv_pnorOpenSlot = (iv_maxErrlInPnor - 1);
// walk thru memory, finding error logs and determine the highest ID
uint32_t l_maxId = 0;
for (uint32_t i = 0; i < iv_maxErrlInPnor; i++)
{
if (!isSlotEmpty(i))
{
uint32_t l_id = readEidFromFlattened(i);
// If id is not from HB (0x9XXXXXXX) grab plid instead
if ( (l_id & FIRST_BYTE_ERRLOG) != ERRLOG_PLID_BASE )
{
l_id = readPlidFromFlattened(i);
}
if (l_id > l_maxId )
{
l_maxId = l_id;
// set this - start at this 'max' slot so that our first
// save will increment correctly
iv_pnorOpenSlot = i;
}
// also check if it's ACKed or not. and ACK it.
// for FSP system, this shouldn't ever happen.
// for non-FSP systems, this clears out all 'last IPL' logs
if (!isSlotACKed(i))
{
TRACFCOMP( g_trac_errl, INFO_MRK"setupPnorInfo slot %d eid %.8X was not ACKed.",
i, l_id);
setACKInFlattened(i);
} // not ACKed
} // not empty
} // for
// bump the current eid to 1 past the max eid found
while (!__sync_bool_compare_and_swap(&iv_currLogId, iv_currLogId,
(iv_currLogId & ERRLOG_PLID_BASE_MASK) +
(l_maxId & ERRLOG_PLID_MASK) + 1));
TRACFCOMP( g_trac_errl, INFO_MRK"setupPnorInfo reseting LogId 0x%X", iv_currLogId);
// if error(s) came in before PNOR was ready,
// the error log(s) would be on this list. save now.
ErrlListItr_t it = iv_errlList.begin();
while(it != iv_errlList.end())
{
// Check if PNOR processing is needed
if (_isPnorFlagSet(*it))
{
//ACK it if no one is there to receive
bool l_savedToPnor = saveErrLogToPnor(it->first);
// check if we actually saved the msg to PNOR
if (l_savedToPnor)
{
// Mark PNOR processing complete
_clearPnorFlag(*it);
_updateErrlListIter(it);
}
else
{
// still couldn't save it (PNOR maybe full) so
// it's still on the list.
break; // get out of this while loop.
}
}
else
{
++it;
}
}
} while (0);
TRACFCOMP( g_trac_errl, EXIT_MRK"setupPnorInfo");
} // setupPnorInfo
