/*------Done in a subroutine to keep main routine stack usage small--------*/ void initialize(void) { watchdog_init(); watchdog_start(); init_lowlevel(); clock_init(); forwarding_enabled = get_forwarding_from_eeprom(); #if ANNOUNCE_BOOT PRINTF("\n*******Booting %s*******\n",CONTIKI_VERSION_STRING); #endif /* rtimers needed for radio cycling */ rtimer_init(); /* Initialize process subsystem */ process_init(); /* etimers must be started before ctimer_init */ process_start(&etimer_process, NULL); #if RF230BB || RF212BB ctimer_init(); /* Start radio and radio receive process */ NETSTACK_RADIO.init(); /* Set addresses BEFORE starting tcpip process */ rimeaddr_t addr; memset(&addr, 0, sizeof(rimeaddr_t)); get_mac_from_eeprom(addr.u8); #if UIP_CONF_IPV6 memcpy(&uip_lladdr.addr, &addr.u8, 8); #endif #if RF230BB rf230_set_pan_addr( get_panid_from_eeprom(), get_panaddr_from_eeprom(), (uint8_t *)&addr.u8 ); rf230_set_channel(CHANNEL_802_15_4); #elif RF212BB rf212_set_pan_addr( get_panid_from_eeprom(), get_panaddr_from_eeprom(), (uint8_t *)&addr.u8 ); #endif extern uint16_t mac_dst_pan_id; extern uint16_t mac_src_pan_id; //set pan_id for frame creation mac_dst_pan_id = get_panid_from_eeprom(); mac_src_pan_id = mac_dst_pan_id; rimeaddr_set_node_addr(&addr); PRINTFD("MAC address %x:%x:%x:%x:%x:%x:%x:%x\n",addr.u8[0],addr.u8[1],addr.u8[2],addr.u8[3],addr.u8[4],addr.u8[5],addr.u8[6],addr.u8[7]); /* Initialize stack protocols */ queuebuf_init(); NETSTACK_RDC.init(); NETSTACK_MAC.init(); NETSTACK_NETWORK.init(); #if ANNOUNCE_BOOT #if RF230BB PRINTF("%s %s, channel %u",NETSTACK_MAC.name, NETSTACK_RDC.name, rf230_get_channel()); #elif RF212BB PRINTF("%s %s, channel %u",NETSTACK_MAC.name, NETSTACK_RDC.name, rf212_get_channel()); #endif /* RF230BB */ if (NETSTACK_RDC.channel_check_interval) {//function pointer is zero for sicslowmac unsigned short tmp; tmp=CLOCK_SECOND / (NETSTACK_RDC.channel_check_interval == 0 ? 1:\ NETSTACK_RDC.channel_check_interval()); if (tmp<65535) printf_P(PSTR(", check rate %u Hz"),tmp); } PRINTF("\n"); #if UIP_CONF_IPV6_RPL PRINTF("RPL Enabled\n"); #endif #if UIP_CONF_ROUTER PRINTF("Routing Enabled\n"); #endif #endif /* ANNOUNCE_BOOT */ // rime_init(rime_udp_init(NULL)); // uip_router_register(&rimeroute); process_start(&tcpip_process, NULL); #else /* Original RF230 combined mac/radio driver */ /* mac process must be started before tcpip process! */ process_start(&mac_process, NULL); process_start(&tcpip_process, NULL); #endif /*RF230BB || RF212BB*/ #if WEBSERVER process_start(&webserver_nogui_process, NULL); #endif /* Handler for HEXABUS UDP Packets */ process_start(&udp_handler_process, NULL); mdns_responder_init(); /* Button Process */ process_start(&button_pressed_process, NULL); /* Init Metering */ metering_init(); /*Init Relay */ relay_init(); /* Autostart other processes */ autostart_start(autostart_processes); /*---If using coffee file system create initial web content if necessary---*/ #if COFFEE_FILES int fa = cfs_open( "/index.html", CFS_READ); if (fa<0) { //Make some default web content PRINTF("No index.html file found, creating upload.html!\n"); PRINTF("Formatting FLASH file system for coffee..."); cfs_coffee_format(); PRINTF("Done!\n"); fa = cfs_open( "/index.html", CFS_WRITE); int r = cfs_write(fa, &"It works!", 9); if (r<0) PRINTF("Can''t create /index.html!\n"); cfs_close(fa); // fa = cfs_open("upload.html"), CFW_WRITE); // <html><body><form action="upload.html" enctype="multipart/form-data" method="post"><input name="userfile" type="file" size="50" /><input value="Upload" type="submit" /></form></body></html> } #endif /* COFFEE_FILES */ /* Add addresses for testing */ #if 0 { uip_ip6addr_t ipaddr; uip_ip6addr(&ipaddr, 0xaaaa, 0, 0, 0, 0, 0, 0, 0); uip_ds6_addr_add(&ipaddr, 0, ADDR_AUTOCONF); // uip_ds6_prefix_add(&ipaddr,64,0); } #endif /*--------------------------Announce the configuration---------------------*/ #if ANNOUNCE_BOOT #if WEBSERVER uint8_t i; char buf[80]; unsigned int size; for (i=0;i<UIP_DS6_ADDR_NB;i++) { if (uip_ds6_if.addr_list[i].isused) { httpd_cgi_sprint_ip6(uip_ds6_if.addr_list[i].ipaddr,buf); PRINTF("IPv6 Address: %s\n",buf); } } eeprom_read_block(buf, (const void*) EE_DOMAIN_NAME, EE_DOMAIN_NAME_SIZE); buf[EE_DOMAIN_NAME_SIZE] = 0; size=httpd_fs_get_size(); #ifndef COFFEE_FILES PRINTF(".%s online with fixed %u byte web content\n",buf,size); #elif COFFEE_FILES==1 PRINTF(".%s online with static %u byte EEPROM file system\n",buf,size); #elif COFFEE_FILES==2 PRINTF(".%s online with dynamic %u KB EEPROM file system\n",buf,size>>10); #elif COFFEE_FILES==3 PRINTF(".%s online with static %u byte program memory file system\n",buf,size); #elif COFFEE_FILES==4 PRINTF(".%s online with dynamic %u KB program memory file system\n",buf,size>>10); #endif /* COFFEE_FILES */ #else PRINTF("Online\n"); #endif /* WEBSERVER */ #endif /* ANNOUNCE_BOOT */ }
/*-----------------------------Low level initialization--------------------*/ static void initialize(void) { asm volatile ("clr r1"); watchdog_init(); watchdog_start(); /* Clock */ clock_init(); /* Initialize hardware */ init_lowlevel(); #if USB_CONF_RS232 /* Use rs232 port for serial out (tx, rx, gnd are the three pads behind jackdaw leds */ rs232_init(RS232_PORT_0, USART_BAUD_57600,USART_PARITY_NONE | USART_STOP_BITS_1 | USART_DATA_BITS_8); /* Redirect stdout to second port */ rs232_redirect_stdout(RS232_PORT_0); #if ANNOUNCE PRINTA("\n\n*******Booting %s*******\n",CONTIKI_VERSION_STRING); #endif #endif /* rtimer init needed for low power protocols */ //rtimer_init(); /* Process subsystem. */ process_init(); /* etimer process must be started before USB or ctimer init */ process_start(&etimer_process, NULL); //ctimer_init(); /* Start radio and radio receive process */ /* Note this starts RF230 process, so must be done after process_init */ NETSTACK_RADIO.init(); generate_random_pan_id_and_aes_key(); /* Set addresses BEFORE starting tcpip process */ memset(&tmp_addr, 0, sizeof(rimeaddr_t)); if(get_eui64_from_eeprom(tmp_addr.u8)); //Fix MAC address init_net(); #if UIP_CONF_IPV6 memcpy(&uip_lladdr.addr, &tmp_addr.u8, 8); #endif rf212_set_pan_addr( get_panid_from_eeprom(), get_panaddr_from_eeprom(), (uint8_t *)&tmp_addr.u8 ); extern uint16_t mac_dst_pan_id; extern uint16_t mac_src_pan_id; //set pan_id for frame creation mac_dst_pan_id = get_panid_from_eeprom(); mac_src_pan_id = mac_dst_pan_id; rimeaddr_set_node_addr(&tmp_addr); /* Initialize stack protocols */ queuebuf_init(); NETSTACK_RDC.init(); NETSTACK_MAC.init(); NETSTACK_NETWORK.init(); #if ANNOUNCE PRINTA("MAC address %x:%x:%x:%x:%x:%x:%x:%x\n\r",tmp_addr.u8[0],tmp_addr.u8[1],tmp_addr.u8[2],tmp_addr.u8[3],tmp_addr.u8[4],tmp_addr.u8[5],tmp_addr.u8[6],tmp_addr.u8[7]); PRINTA("%s %s, channel %u",NETSTACK_MAC.name, NETSTACK_RDC.name,rf212_get_channel()); PRINTA("\n"); #endif #if UIP_CONF_IPV6_RPL #if RPL_BORDER_ROUTER process_start(&tcpip_process, NULL); process_start(&border_router_process, NULL); PRINTD ("RPL Border Router Started\n"); #else process_start(&tcpip_process, NULL); PRINTD ("RPL Started\n"); #endif #if RPL_HTTPD_SERVER extern struct process httpd_process; process_start(&httpd_process, NULL); PRINTD ("Webserver Started\n"); #endif #endif /* UIP_CONF_IPV6_RPL */ /* Start USB enumeration */ process_start(&usb_process, NULL); /* Start CDC enumeration, bearing in mind that it may fail */ /* Hopefully we'll get a stdout for startup messages, if we don't already */ #if USB_CONF_SERIAL process_start(&cdc_process, NULL); {unsigned short i; for (i=0;i<65535;i++) { process_run(); watchdog_periodic(); if (stdout) break; } #if !USB_CONF_RS232 PRINTA("\n\n*******Booting %s*******\n",CONTIKI_VERSION_STRING); #endif } #endif /* Start ethernet network and storage process */ process_start(&usb_eth_process, NULL); #if USB_CONF_STORAGE // process_start(&storage_process, NULL); #endif #if ANNOUNCE #if USB_CONF_RS232 PRINTA("Online.\n"); #else PRINTA("Online. Type ? for Jackdaw menu.\n"); #endif #endif /* Button Process */ process_start(&button_pressed_process, NULL); leds_on(LEDS_GREEN); //normal state indication }
int main(void) { /* * Initalize hardware. */ PIO_InitializeInterrupts(0); usbmain(); clock_init(); rtimer_init(); process_init(); process_start(&etimer_process, NULL); ctimer_init(); NETSTACK_RADIO.init(); rimeaddr_t addr; eeprom_init(); memset(&addr, 0, sizeof(rimeaddr_t)); memcpy(&addr.u8, eeprom_getEUI64(), 8); #if UIP_CONF_IPV6 memcpy(&uip_lladdr.addr, &addr.u8, 8); #endif #if RF212BB rf212_set_pan_addr( eeprom_getPanid(), eeprom_getPanaddr(), (uint8_t *)&addr.u8); #endif extern uint16_t mac_dst_pan_id; extern uint16_t mac_src_pan_id; //set pan_id for frame creation mac_dst_pan_id = eeprom_getPanid(); mac_src_pan_id = mac_dst_pan_id; rimeaddr_set_node_addr(&addr); PRINTFD("MAC address %x:%x:%x:%x:%x:%x:%x:%x\n",addr.u8[0],addr.u8[1],addr.u8[2],addr.u8[3],addr.u8[4],addr.u8[5],addr.u8[6],addr.u8[7]); /* Initialize stack protocols */ queuebuf_init(); NETSTACK_RDC.init(); NETSTACK_MAC.init(); NETSTACK_NETWORK.init(); //netstack_init(); process_start(&tcpip_process, NULL); /* * Initialize Contiki and our processes. */ //netstack_init(); autostart_start(autostart_processes); while(1) { int r; do { /* Reset watchdog. */ r = process_run(); } while(r > 0); } }