/*---------------------------------------------------------------------------*/
void
contiki_init()
{
/* Initialize random generator (moved to moteid.c) */
/* Start process handler */
process_init();
/* Start Contiki processes */
process_start(&etimer_process, NULL);
process_start(&sensors_process, NULL);
ctimer_init();
/* Print startup information */
printf(CONTIKI_VERSION_STRING " started. ");
if(node_id > 0) {
printf("Node id is set to %u.\n", node_id);
} else {
printf("Node id is not set.\n");
}
set_rime_addr();
{
uint8_t longaddr[8];
uint16_t shortaddr;
shortaddr = (linkaddr_node_addr.u8[0] << 8) +
linkaddr_node_addr.u8[1];
memset(longaddr, 0, sizeof(longaddr));
linkaddr_copy((linkaddr_t *)&longaddr, &linkaddr_node_addr);
printf("MAC %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x ",
longaddr[0], longaddr[1], longaddr[2], longaddr[3],
longaddr[4], longaddr[5], longaddr[6], longaddr[7]);
}
queuebuf_init();
/* Initialize communication stack */
netstack_init();
printf("%s/%s/%s, channel check rate %lu Hz\n",
NETSTACK_NETWORK.name, NETSTACK_MAC.name, NETSTACK_RDC.name,
CLOCK_SECOND / (NETSTACK_RDC.channel_check_interval() == 0 ? 1:
NETSTACK_RDC.channel_check_interval()));
#if WITH_UIP
/* IPv4 CONFIGURATION */
{
uip_ipaddr_t hostaddr, netmask;
process_start(&tcpip_process, NULL);
process_start(&uip_fw_process, NULL);
process_start(&slip_process, NULL);
slip_set_input_callback(set_gateway);
uip_init();
uip_fw_init();
uip_ipaddr(&hostaddr, 172,16,linkaddr_node_addr.u8[0],linkaddr_node_addr.u8[1]);
uip_ipaddr(&netmask, 255,255,0,0);
uip_ipaddr_copy(&meshif.ipaddr, &hostaddr);
uip_sethostaddr(&hostaddr);
uip_setnetmask(&netmask);
uip_over_mesh_set_net(&hostaddr, &netmask);
uip_over_mesh_set_gateway_netif(&slipif);
uip_fw_default(&meshif);
uip_over_mesh_init(UIP_OVER_MESH_CHANNEL);
rs232_set_input(slip_input_byte);
printf("IPv4 address: %d.%d.%d.%d\n", uip_ipaddr_to_quad(&hostaddr));
}
#endif /* WITH_UIP */
#if WITH_UIP6
/* IPv6 CONFIGURATION */
{
int i;
uint8_t addr[sizeof(uip_lladdr.addr)];
for(i = 0; i < sizeof(uip_lladdr.addr); i += 2) {
addr[i + 1] = node_id & 0xff;
addr[i + 0] = node_id >> 8;
}
linkaddr_copy(addr, &linkaddr_node_addr);
memcpy(&uip_lladdr.addr, addr, sizeof(uip_lladdr.addr));
process_start(&tcpip_process, NULL);
printf("Tentative link-local IPv6 address ");
{
uip_ds6_addr_t *lladdr;
int i;
lladdr = uip_ds6_get_link_local(-1);
for(i = 0; i < 7; ++i) {
printf("%02x%02x:", lladdr->ipaddr.u8[i * 2],
lladdr->ipaddr.u8[i * 2 + 1]);
}
printf("%02x%02x\n", lladdr->ipaddr.u8[14],
lladdr->ipaddr.u8[15]);
}
if(1) {
uip_ipaddr_t ipaddr;
int i;
uip_ip6addr(&ipaddr, 0xaaaa, 0, 0, 0, 0, 0, 0, 0);
uip_ds6_set_addr_iid(&ipaddr, &uip_lladdr);
uip_ds6_addr_add(&ipaddr, 0, ADDR_TENTATIVE);
printf("Tentative global IPv6 address ");
for(i = 0; i < 7; ++i) {
printf("%02x%02x:",
ipaddr.u8[i * 2], ipaddr.u8[i * 2 + 1]);
}
printf("%02x%02x\n",
ipaddr.u8[7 * 2], ipaddr.u8[7 * 2 + 1]);
}
}
#endif /* WITH_UIP6 */
/* Initialize eeprom */
eeprom_init();
/* Start serial process */
serial_line_init();
/* Start autostart processes (defined in Contiki application) */
print_processes(autostart_processes);
autostart_start(autostart_processes);
}
/*------Done in a subroutine to keep main routine stack usage small--------*/
void initialize(void)
{
//calibrate_rc_osc_32k(); //CO: Had to comment this out
#ifdef RAVEN_LCD_INTERFACE
/* First rs232 port for Raven 3290 port */
rs232_init(RS232_PORT_0, USART_BAUD_38400,USART_PARITY_NONE | USART_STOP_BITS_1 | USART_DATA_BITS_8);
/* Set input handler for 3290 port */
rs232_set_input(0,raven_lcd_serial_input);
#endif
/* Second rs232 port for debugging */
rs232_init(RS232_PORT_1, USART_BAUD_57600,USART_PARITY_NONE | USART_STOP_BITS_1 | USART_DATA_BITS_8);
/* Redirect stdout to second port */
rs232_redirect_stdout(RS232_PORT_1);
clock_init();
printf_P(PSTR("\n*******Booting %s*******\n"),CONTIKI_VERSION_STRING);
/* Initialize process subsystem */
process_init();
#ifdef RF230BB
{
/* Start radio and radio receive process */
rf230_init();
sicslowpan_init(sicslowmac_init(&rf230_driver));
// ctimer_init();
// sicslowpan_init(lpp_init(&rf230_driver));
// rime_init(sicslowmac_driver.init(&rf230_driver));
// rime_init(lpp_init(&rf230_driver));
/* Set addresses BEFORE starting tcpip process */
rimeaddr_t addr;
memset(&addr, 0, sizeof(rimeaddr_t));
AVR_ENTER_CRITICAL_REGION();
eeprom_read_block ((void *)&addr.u8, &mac_address, 8);
AVR_LEAVE_CRITICAL_REGION();
memcpy(&uip_lladdr.addr, &addr.u8, 8);
rf230_set_pan_addr(IEEE802154_PANID, 0, (uint8_t *)&addr.u8);
rf230_set_channel(24);
rimeaddr_set_node_addr(&addr);
PRINTF("MAC address %x:%x:%x:%x:%x:%x:%x:%x\n",addr.u8[0],addr.u8[1],addr.u8[2],addr.u8[3],addr.u8[4],addr.u8[5],addr.u8[6],addr.u8[7]);
// uip_ip6addr(&ipprefix, 0xaaaa, 0, 0, 0, 0, 0, 0, 0);
// uip_netif_addr_add(&ipprefix, UIP_DEFAULT_PREFIX_LEN, 0, AUTOCONF);
// uip_nd6_prefix_add(&ipprefix, UIP_DEFAULT_PREFIX_LEN, 0);
// PRINTF("Prefix %x::/%u\n",ipprefix.u16[0],UIP_DEFAULT_PREFIX_LEN);
#if UIP_CONF_ROUTER
rime_init(rime_udp_init(NULL));
uip_router_register(&rimeroute);
#endif
PRINTF("Driver: %s, Channel: %u\n", sicslowmac_driver.name, rf230_get_channel());
}
#endif /*RF230BB*/
/* Register initial processes */
procinit_init();
/* Autostart processes */
autostart_start(autostart_processes);
//Give ourselves a prefix
// init_net();
/*---If using coffee file system create initial web content if necessary---*/
#if COFFEE_FILES
int fa = cfs_open( "/index.html", CFS_READ);
if (fa<0) { //Make some default web content
printf_P(PSTR("No index.html file found, creating upload.html!\n"));
printf_P(PSTR("Formatting FLASH file system for coffee..."));
cfs_coffee_format();
printf_P(PSTR("Done!\n"));
fa = cfs_open( "/index.html", CFS_WRITE);
int r = cfs_write(fa, &"It works!", 9);
if (r<0) printf_P(PSTR("Can''t create /index.html!\n"));
cfs_close(fa);
// fa = cfs_open("upload.html"), CFW_WRITE);
// <html><body><form action="upload.html" enctype="multipart/form-data" method="post"><input name="userfile" type="file" size="50" /><input value="Upload" type="submit" /></form></body></html>
}
#endif
/*--------------------------Announce the configuration---------------------*/
#if WEBSERVER
char buf[80];
unsigned int size;
eeprom_read_block (buf,server_name, sizeof(server_name));
buf[sizeof(server_name)]=0;
printf_P(PSTR("%s"),buf);
eeprom_read_block (buf,domain_name, sizeof(domain_name));
buf[sizeof(domain_name)]=0;
size=httpd_fs_get_size();
#ifndef COFFEE_FILES
printf_P(PSTR(".%s online with fixed %u byte web content\n"),buf,size);
#elif COFFEE_FILES==1
printf_P(PSTR(".%s online with static %u byte EEPROM file system\n"),buf,size);
#elif COFFEE_FILES==2
printf_P(PSTR(".%s online with dynamic %u KB EEPROM file system\n"),buf,size>>10);
#elif COFFEE_FILES==3
printf_P(PSTR(".%s online with static %u byte program memory file system\n"),buf,size);
#elif COFFEE_FILES==4
printf_P(PSTR(".%s online with dynamic %u KB program memory file system\n"),buf,size>>10);
#endif
#else
printf_P(PSTR("Online\n"));
#endif /* WEBSERVER */
}
/*---------------------------------------------------------------------------*/
void
contiki_init()
{
/* Initialize random generator (moved to moteid.c) */
/* Start process handler */
process_init();
/* Start Contiki processes */
procinit_init();
/* Print startup information */
printf(CONTIKI_VERSION_STRING " started. ");
if(node_id > 0) {
printf("Node id is set to %u.\n", node_id);
} else {
printf("Node id is not set.\n");
}
/* RIME CONFIGURATION */
{
int i;
rimeaddr_t rimeaddr;
/* Init Rime */
ctimer_init();
rimeaddr.u8[0] = node_id & 0xff;
rimeaddr.u8[1] = node_id >> 8;
rimeaddr_set_node_addr(&rimeaddr);
printf("Rime address: ");
for(i = 0; i < sizeof(rimeaddr_node_addr.u8) - 1; i++) {
printf("%d.", rimeaddr_node_addr.u8[i]);
}
printf("%d\n", rimeaddr_node_addr.u8[i]);
}
queuebuf_init();
/* Initialize communication stack */
netstack_init();
printf("MAC %s RDC %s NETWORK %s\n", NETSTACK_MAC.name, NETSTACK_RDC.name, NETSTACK_NETWORK.name);
#if WITH_UIP
/* IPv4 CONFIGURATION */
{
uip_ipaddr_t hostaddr, netmask;
process_start(&tcpip_process, NULL);
process_start(&uip_fw_process, NULL);
process_start(&slip_process, NULL);
slip_set_input_callback(set_gateway);
uip_init();
uip_fw_init();
uip_ipaddr(&hostaddr, 172,16,rimeaddr_node_addr.u8[0],rimeaddr_node_addr.u8[1]);
uip_ipaddr(&netmask, 255,255,0,0);
uip_ipaddr_copy(&meshif.ipaddr, &hostaddr);
uip_sethostaddr(&hostaddr);
uip_setnetmask(&netmask);
uip_over_mesh_set_net(&hostaddr, &netmask);
uip_over_mesh_set_gateway_netif(&slipif);
uip_fw_default(&meshif);
uip_over_mesh_init(UIP_OVER_MESH_CHANNEL);
rs232_set_input(slip_input_byte);
printf("IPv4 address: %d.%d.%d.%d\n", uip_ipaddr_to_quad(&hostaddr));
}
#endif /* WITH_UIP */
#if WITH_UIP6
/* IPv6 CONFIGURATION */
{
int i;
uint8_t addr[sizeof(uip_lladdr.addr)];
for (i=0; i < sizeof(uip_lladdr.addr); i++) {
addr[i] = node_id & 0xff;
}
memcpy(&uip_lladdr.addr, addr, sizeof(uip_lladdr.addr));
process_start(&tcpip_process, NULL);
printf("Tentative link-local IPv6 address ");
{
int i, a;
for(a = 0; a < UIP_DS6_ADDR_NB; a++) {
if (uip_ds6_if.addr_list[a].isused) {
for(i = 0; i < 7; ++i) {
printf("%02x%02x:",
uip_ds6_if.addr_list[a].ipaddr.u8[i * 2],
uip_ds6_if.addr_list[a].ipaddr.u8[i * 2 + 1]);
}
printf("%02x%02x\n",
uip_ds6_if.addr_list[a].ipaddr.u8[14],
uip_ds6_if.addr_list[a].ipaddr.u8[15]);
}
}
}
if(1) {
uip_ipaddr_t ipaddr;
int i;
uip_ip6addr(&ipaddr, 0xaaaa, 0, 0, 0, 0, 0, 0, 0);
uip_ds6_set_addr_iid(&ipaddr, &uip_lladdr);
uip_ds6_addr_add(&ipaddr, 0, ADDR_TENTATIVE);
printf("Tentative global IPv6 address ");
for(i = 0; i < 7; ++i) {
printf("%02x%02x:",
ipaddr.u8[i * 2], ipaddr.u8[i * 2 + 1]);
}
printf("%02x%02x\n",
ipaddr.u8[7 * 2], ipaddr.u8[7 * 2 + 1]);
}
}
#endif /* WITH_UIP6 */
/* Start serial process */
serial_line_init();
/* Start autostart processes (defined in Contiki application) */
print_processes(autostart_processes);
autostart_start(autostart_processes);
}
/*---------------------------------------------------------------------------*/
void
contiki_init(void)
{
int i;
uint8_t addr[sizeof(uip_lladdr.addr)];
uip_ipaddr_t ipaddr;
uip_ds6_addr_t *lladdr;
uip_ip4addr_t ipv4addr, netmask;
/* Start process handler */
process_init();
/* Start Contiki processes */
process_start(&etimer_process, NULL);
process_start(&sensors_process, NULL);
ctimer_init();
/* Print startup information */
printf(CONTIKI_VERSION_STRING " started. ");
if(node_id > 0) {
printf("Node id is set to %u.\n", node_id);
} else {
printf("Node id is not set.\n");
}
set_mac_addr();
queuebuf_init();
/* Initialize communication stack */
netstack_init();
printf("%s/%s/%s, channel check rate %lu Hz\n",
NETSTACK_NETWORK.name, NETSTACK_MAC.name, NETSTACK_RDC.name,
CLOCK_SECOND / (NETSTACK_RDC.channel_check_interval() == 0 ? 1:
NETSTACK_RDC.channel_check_interval()));
/* IPv6 CONFIGURATION */
for(i = 0; i < sizeof(uip_lladdr.addr); i += 2) {
addr[i + 1] = node_id & 0xff;
addr[i + 0] = node_id >> 8;
}
linkaddr_copy(addr, &linkaddr_node_addr);
memcpy(&uip_lladdr.addr, addr, sizeof(uip_lladdr.addr));
process_start(&tcpip_process, NULL);
printf("Tentative link-local IPv6 address ");
lladdr = uip_ds6_get_link_local(-1);
for(i = 0; i < 7; ++i) {
printf("%02x%02x:", lladdr->ipaddr.u8[i * 2],
lladdr->ipaddr.u8[i * 2 + 1]);
}
printf("%02x%02x\n", lladdr->ipaddr.u8[14],
lladdr->ipaddr.u8[15]);
uip_ip6addr(&ipaddr, 0xaaaa, 0, 0, 0, 0, 0, 0, 0);
uip_ds6_set_addr_iid(&ipaddr, &uip_lladdr);
uip_ds6_addr_add(&ipaddr, 0, ADDR_TENTATIVE);
printf("Tentative global IPv6 address ");
for(i = 0; i < 7; ++i) {
printf("%02x%02x:",
ipaddr.u8[i * 2], ipaddr.u8[i * 2 + 1]);
}
printf("%02x%02x\n",
ipaddr.u8[7 * 2], ipaddr.u8[7 * 2 + 1]);
/* Start serial process */
serial_line_init();
/* Start autostart processes (defined in Contiki application) */
print_processes(autostart_processes);
autostart_start(autostart_processes);
/* Start the SLIP */
printf("Initiating SLIP with IP address is 172.16.0.2.\n");
uip_ipaddr(&ipv4addr, 172, 16, 0, 2);
uip_ipaddr(&netmask, 255, 255, 255, 0);
ip64_set_ipv4_address(&ipv4addr, &netmask);
rs232_set_input(slip_input_byte);
log_set_putchar_with_slip(1);
uip_ip4addr_t ip4addr;
uip_ip6addr_t ip6addr;
uip_ipaddr(&ip4addr, 8,8,8,8);
ip64_addr_4to6(&ip4addr, &ip6addr);
uip_nameserver_update((uip_ipaddr_t *)&ip6addr, UIP_NAMESERVER_INFINITE_LIFETIME);
}
/**
* Initalize the RS232 port and the SLIP driver.
*
*/
void
slip_arch_init(unsigned long ubr)
{
rs232_set_input(slip_input_byte);
}
/*------Done in a subroutine to keep main routine stack usage small--------*/
void initialize(void)
{
watchdog_init();
watchdog_start();
#ifdef RAVEN_LCD_INTERFACE
/* First rs232 port for Raven 3290 port */
rs232_init(RS232_PORT_0, USART_BAUD_38400,USART_PARITY_NONE | USART_STOP_BITS_1 | USART_DATA_BITS_8);
/* Set input handler for 3290 port */
rs232_set_input(0,raven_lcd_serial_input);
#endif
/* Second rs232 port for debugging */
rs232_init(RS232_PORT_1, USART_BAUD_57600,USART_PARITY_NONE | USART_STOP_BITS_1 | USART_DATA_BITS_8);
/* Redirect stdout to second port */
rs232_redirect_stdout(RS232_PORT_1);
clock_init();
#if STACKMONITOR
/* Simple stack pointer highwater monitor. Checks for magic numbers in the main
* loop. In conjuction with TESTRTIMER, never-used stack will be printed
* every STACKMONITOR seconds.
*/
{
extern uint16_t __bss_end;
uint16_t p=(uint16_t)&__bss_end;
do {
*(uint16_t *)p = 0x4242;
p+=10;
} while (p<SP-10); //don't overwrite our own stack
}
#endif
#define CONF_CALIBRATE_OSCCAL 0
#if CONF_CALIBRATE_OSCCAL
{
extern uint8_t osccal_calibrated;
uint8_t i;
PRINTF("\nBefore calibration OSCCAL=%x\n",OSCCAL);
for (i=0;i<10;i++) {
calibrate_rc_osc_32k();
PRINTF("Calibrated=%x\n",osccal_calibrated);
//#include <util/delay_basic.h>
//#define delay_us( us ) ( _delay_loop_2(1+(us*F_CPU)/4000000UL) )
// delay_us(50000);
}
clock_init();
}
#endif
#if ANNOUNCE_BOOT
PRINTF("\n*******Booting %s*******\n",CONTIKI_VERSION_STRING);
#endif
/* rtimers needed for radio cycling */
rtimer_init();
/* Initialize process subsystem */
process_init();
/* etimers must be started before ctimer_init */
process_start(&etimer_process, NULL);
#if RF230BB
ctimer_init();
/* Start radio and radio receive process */
NETSTACK_RADIO.init();
/* Set addresses BEFORE starting tcpip process */
rimeaddr_t addr;
memset(&addr, 0, sizeof(rimeaddr_t));
get_mac_from_eeprom(addr.u8);
#if UIP_CONF_IPV6
memcpy(&uip_lladdr.addr, &addr.u8, 8);
#endif
rf230_set_pan_addr(
get_panid_from_eeprom(),
get_panaddr_from_eeprom(),
(uint8_t *)&addr.u8
);
rf230_set_channel(get_channel_from_eeprom());
rimeaddr_set_node_addr(&addr);
PRINTFD("MAC address %x:%x:%x:%x:%x:%x:%x:%x\n",addr.u8[0],addr.u8[1],addr.u8[2],addr.u8[3],addr.u8[4],addr.u8[5],addr.u8[6],addr.u8[7]);
/* Initialize stack protocols */
queuebuf_init();
NETSTACK_RDC.init();
NETSTACK_MAC.init();
NETSTACK_NETWORK.init();
#if ANNOUNCE_BOOT
PRINTF("%s %s, channel %u",NETSTACK_MAC.name, NETSTACK_RDC.name,rf230_get_channel());
if (NETSTACK_RDC.channel_check_interval) {//function pointer is zero for sicslowmac
unsigned short tmp;
tmp=CLOCK_SECOND / (NETSTACK_RDC.channel_check_interval == 0 ? 1:\
NETSTACK_RDC.channel_check_interval());
if (tmp<65535) printf_P(PSTR(", check rate %u Hz"),tmp);
}
PRINTF("\n");
#if UIP_CONF_IPV6_RPL
PRINTF("RPL Enabled\n");
#endif
#if UIP_CONF_ROUTER
PRINTF("Routing Enabled\n");
#endif
#endif /* ANNOUNCE_BOOT */
// rime_init(rime_udp_init(NULL));
// uip_router_register(&rimeroute);
process_start(&tcpip_process, NULL);
#else
/* Original RF230 combined mac/radio driver */
/* mac process must be started before tcpip process! */
process_start(&mac_process, NULL);
process_start(&tcpip_process, NULL);
#endif /*RF230BB*/
#ifdef RAVEN_LCD_INTERFACE
process_start(&raven_lcd_process, NULL);
#endif
/* Autostart other processes */
autostart_start(autostart_processes);
//Give ourselves a prefix
// init_net();
/*---If using coffee file system create initial web content if necessary---*/
#if COFFEE_FILES
int fa = cfs_open( "/index.html", CFS_READ);
if (fa<0) { //Make some default web content
PRINTF("No index.html file found, creating upload.html!\n");
PRINTF("Formatting FLASH file system for coffee...");
cfs_coffee_format();
PRINTF("Done!\n");
fa = cfs_open( "/index.html", CFS_WRITE);
int r = cfs_write(fa, &"It works!", 9);
if (r<0) PRINTF("Can''t create /index.html!\n");
cfs_close(fa);
// fa = cfs_open("upload.html"), CFW_WRITE);
// <html><body><form action="upload.html" enctype="multipart/form-data" method="post"><input name="userfile" type="file" size="50" /><input value="Upload" type="submit" /></form></body></html>
}
#endif /* COFFEE_FILES */
/* Add addresses for testing */
#if 0
{
uip_ip6addr_t ipaddr;
uip_ip6addr(&ipaddr, 0xaaaa, 0, 0, 0, 0, 0, 0, 0);
uip_ds6_addr_add(&ipaddr, 0, ADDR_AUTOCONF);
// uip_ds6_prefix_add(&ipaddr,64,0);
}
#endif
/*--------------------------Announce the configuration---------------------*/
#if ANNOUNCE_BOOT
#if AVR_WEBSERVER
uint8_t i;
char buf[80];
unsigned int size;
for (i=0;i<UIP_DS6_ADDR_NB;i++) {
if (uip_ds6_if.addr_list[i].isused) {
httpd_cgi_sprint_ip6(uip_ds6_if.addr_list[i].ipaddr,buf);
PRINTF("IPv6 Address: %s\n",buf);
}
}
eeprom_read_block (buf,server_name, sizeof(server_name));
buf[sizeof(server_name)]=0;
PRINTF("%s",buf);
eeprom_read_block (buf,domain_name, sizeof(domain_name));
buf[sizeof(domain_name)]=0;
size=httpd_fs_get_size();
#ifndef COFFEE_FILES
PRINTF(".%s online with fixed %u byte web content\n",buf,size);
#elif COFFEE_FILES==1
PRINTF(".%s online with static %u byte EEPROM file system\n",buf,size);
#elif COFFEE_FILES==2
PRINTF(".%s online with dynamic %u KB EEPROM file system\n",buf,size>>10);
#elif COFFEE_FILES==3
PRINTF(".%s online with static %u byte program memory file system\n",buf,size);
#elif COFFEE_FILES==4
PRINTF(".%s online with dynamic %u KB program memory file system\n",buf,size>>10);
#endif /* COFFEE_FILES */
#else
PRINTF("Online\n");
#endif /* AVR_WEBSERVER */
#endif /* ANNOUNCE_BOOT */
}
/*------Done in a subroutine to keep main routine stack usage small--------*/
void initialize(void)
{
#if WITH_SLIP
//Slip border router on uart0
rs232_init(RS232_PORT_0, USART_BAUD_38400,USART_PARITY_NONE | USART_STOP_BITS_1 | USART_DATA_BITS_8);
#else
/* First rs232 port for debugging */
rs232_init(RS232_PORT_0, USART_BAUD_57600,USART_PARITY_NONE | USART_STOP_BITS_1 | USART_DATA_BITS_8);
/* Redirect stdout to first port */
rs232_redirect_stdout(RS232_PORT_0);
/* Get input from first port */
rs232_set_input(RS232_PORT_0, serial_line_input_byte);
#endif
clock_init();
if(MCUSR & (1<<PORF )) PRINTA("Power-on reset.\n");
if(MCUSR & (1<<EXTRF)) PRINTA("External reset!\n");
if(MCUSR & (1<<BORF )) PRINTA("Brownout reset!\n");
if(MCUSR & (1<<WDRF )) PRINTA("Watchdog reset!\n");
if(MCUSR & (1<<JTRF )) PRINTA("JTAG reset!\n");
#if ANNOUNCE_BOOT
PRINTA("\n*******Booting %s*******\n",CONTIKI_VERSION_STRING);
#endif
/* Initialize process subsystem */
process_init();
/* etimers must be started before ctimer_init */
process_start(&etimer_process, NULL);
/* Initilaize serial line for input */
serial_line_init();
/* Initialize board LEDs */
leds_init();
/* When used for testing, we should start with them off */
leds_off(LEDS_GREEN|LEDS_YELLOW);
ctimer_init();
/* Start radio and radio receive process */
NETSTACK_RADIO.init();
/* Set addresses BEFORE starting tcpip process */
rimeaddr_t addr;
memset(&addr, 0, sizeof(rimeaddr_t));
get_mac_from_eeprom(addr.u8);
memcpy(&uip_lladdr.addr, &addr.u8, 8);
// Is this required with IPv6, I wonder?
#if 1
rf230_set_pan_addr(
IEEE802154_PANID,
0,
(uint8_t *)&addr.u8
);
rf230_set_channel(26);
rimeaddr_set_node_addr(&addr);
#endif
PRINTF("MAC address %x:%x:%x:%x:%x:%x:%x:%x\n",addr.u8[0],addr.u8[1],addr.u8[2],addr.u8[3],addr.u8[4],addr.u8[5],addr.u8[6],addr.u8[7]);
/* Initialize stack protocols */
queuebuf_init();
NETSTACK_RDC.init();
NETSTACK_MAC.init();
NETSTACK_NETWORK.init();
#if ANNOUNCE_BOOT
PRINTA("%s %s, channel %u",NETSTACK_MAC.name, NETSTACK_RDC.name,rf230_get_channel());
if (NETSTACK_RDC.channel_check_interval) //function pointer is zero for sicslowmac
{
unsigned short tmp;
tmp=CLOCK_SECOND / (NETSTACK_RDC.channel_check_interval == 0 ? 1:\
NETSTACK_RDC.channel_check_interval());
if (tmp<65535) PRINTA(", check rate %u Hz",tmp);
}
PRINTA("\n");
#endif
#if UIP_CONF_ROUTER
//#warning Zigduino has not been tested with UIP_CONF_ROUTER
#if ANNOUNCE_BOOT
PRINTA("Routing Enabled\n");
#endif
#endif
/* Sensors process means all processes will get an event posted whenever sensors change.
Not always desired, so may want to put this on a compile switch. */
process_start(&sensors_process, NULL);
SENSORS_ACTIVATE(button_sensor);
process_start(&tcpip_process, NULL);
//Give ourselves a prefix
// init_net();
/* Add easy addresses for testing */
uip_ip6addr_t ipaddr;
uip_ip6addr(&ipaddr, 0xfe80, 0, 0, 0, 0, 0, 0, addr.u8[7]);
uip_ds6_addr_add(&ipaddr, 0, ADDR_AUTOCONF);
#if UIP_CONF_ROUTER
uip_ds6_prefix_add(&ipaddr,64,0,0,0,0);
#else
uip_ds6_prefix_add(&ipaddr,64,0);
#endif
/* Create a route through the border router for site-local addresses, fec0::/64. */
uip_ds6_route_t *rep;
uip_ip6addr_t next_hop;
uip_ip6addr(&ipaddr, 0xfec0, 0, 0, 0, 0, 0, 0, 0);
uip_ip6addr(&next_hop, 0xaaaa, 0, 0, 0, 0, 0, 0, 1);
if((rep = uip_ds6_route_add(&ipaddr, 64, &next_hop, 0)) == NULL)
{
printf("*** Failed to add a route to fec0::/64\n");
}
printf("Autostart other processes\n");
/* Autostart other processes */
autostart_start(autostart_processes);
/*--------------------------Announce the configuration---------------------*/
#if ANNOUNCE_BOOT
extern uip_ds6_netif_t uip_ds6_if;
uint8_t i;
PRINTA("\nIP addresses [%u max]\n",UIP_DS6_ADDR_NB);
for (i=0; i<UIP_DS6_ADDR_NB; i++)
{
if (uip_ds6_if.addr_list[i].isused)
{
uip_debug_ipaddr_print(&uip_ds6_if.addr_list[i].ipaddr);
PRINTA("\n");
}
}
#endif /* ANNOUNCE_BOOT */
}
/*---------------------------------------------------------------------------*/
PROCESS_THREAD(check_sensor_status, ev, data)
{
uip_ipaddr_t addr;
static struct etimer periodic_timer;
int i=0;
char globalStatus=0;
PROCESS_BEGIN();
for(i=0;i<20;i++){
sensorsList[i].type = SENSOR_NONE;
sensorsList[i].status = STATUS_OK;
sensorsList[i].lastTime = 0;
sensorsList[i].failedTimeouts = 0;
}
sensorsList[0].type = SENSOR_PIR;
sensorsList[1].type = SENSOR_CHOCK;
sensorsList[2].type = SENSOR_PIR;
sensorsList[3].type = SENSOR_RFID;
DDRB = 0x00;
PORTB = 0x00;
//sensorsList[0].type = SENSOR_PIR;
//sensorsList[1].type = SENSOR_PIR;
//sensorsList[2].type = SENSOR_CHOCK;
//rs232_init(RS232_PORT_0, USART_BAUD_19200, USART_PARITY_NONE | USART_STOP_BITS_1 | USART_DATA_BITS_8);
//rs232_redirect_stdout(RS232_PORT_0);
//rs232_send(RS232_PORT_n, char c); // OR FOR STRINGS rs232_print(char *);
rs232_set_input(RS232_PORT_0, uart0_callback);
uart0_setLineCallback(baseReadyUART);
rs232_init(RS232_PORT_1, USART_BAUD_9600, USART_PARITY_NONE | USART_STOP_BITS_1 | USART_DATA_BITS_8);
rs232_set_input(RS232_PORT_1, uart1_callback);
uart1_setLineCallback(lineReadyUART1);
simple_udp_register(&broadcast_connection, UDP_PORT, NULL, UDP_PORT, receiver);
etimer_set(&periodic_timer, CHECK_INTERVAL);
while(1) {
PROCESS_WAIT_EVENT_UNTIL(etimer_expired(&periodic_timer));
etimer_reset(&periodic_timer);
for(i=0;i<20;i++){
if(sensorsList[i].type != 0){
sensorsList[i].lastTime++;
if(sensorsList[i].lastTime == 11){ /* SECONDS / 2 => *0->11* 6 seconds without infos */
sensorsList[i].failedTimeouts++;
sensorsList[i].lastTime = 0;
uip_create_linklocal_allnodes_mcast(&addr);
sprintf(string6LOWPAN,"{\"cmd\":\"s\",\"id\":\"%d\"}",i);
simple_udp_sendto(&broadcast_connection, string6LOWPAN, strlen(string6LOWPAN), &addr);
if(sensorsList[i].failedTimeouts == 3){
sensorsList[i].failedTimeouts = 0;
sensorsList[i].status = STATUS_TIMEOUT;
printf("{\"cmd\":\"g\",\"id\":\"%d\",\"st\":\"%d\",\"ty\":\"%d\"}\n", i, sensorsList[i].status, sensorsList[i].type);
}
}
}
}
}
PROCESS_END();
}
uart1_set_input(int (*input)(unsigned char c))
{
rs232_set_input(RS232_PORT_1, input);
}
