void main(void)
{
USB_STATUS status = USB_OK;
/* Initialize the current platform. Call for the _bsp_platform_init which is specific to each processor family */
_bsp_platform_init();
sci1_init();
sci2_init();
IIC_ModuleInit();
TimerInit();
DisableInterrupts;
/* enable interrupt OTG module */
Int_Ctl_int_init(IRQ3_INT_CNTL, IRQ3_ISR_SRC, 2,2, TRUE);
MCF_EPORT_EPPAR |= MCF_EPORT_EPPAR_EPPA3_FALLING; /* falling edge */
MCF_EPORT_EPDDR &= ~MCF_EPORT_EPDDR_EPDD3; /* set input*/
MCF_EPORT_EPIER |= MCF_EPORT_EPIER_EPIE3; /* enable interrupts IRQ 3 */
/* set VHost pin ( PUC3) */
MCF_GPIO_DDRUC |= MCF_GPIO_DDRUC_DDRUC3; /* set output */
MCF_GPIO_PUCPAR |= MCF_GPIO_PUCPAR_UCTS2_GPIO; /* set as GPIO */
ENABLE_USB_5V;
status = _usb_otg_init(0, (OTG_INIT_STRUCT*)&otg_init, &otg_handle);
if(status == USB_OK)
{
status = _usb_otg_register_callback(otg_handle, App_OtgCallback);
}
EnableInterrupts;
#if (defined _MCF51MM256_H) || (defined _MCF51JE256_H)
usb_int_en();
#endif
printf("\n\rInitialization passed. Plug-in MSD device to USB port");
printf("\n\rPress P to print the menu:");
for(;;)
{
_usb_otg_task();
if(dev_stack_active)
{
App_PeripheralTask();
}
if(host_stack_active)
{
App_Host_Task();
}
App_HandleUserInput();
__RESET_WATCHDOG(); /* feeds the dog */
} /* loop forever */
/* please make sure that you never leave main */
}
void main(void)
#endif
{
USB_STATUS status = USB_OK;
/* Initialize the current platform. Call for the _bsp_platform_init which is specific to each processor family */
_bsp_platform_init();
#ifdef MCU_MK70F12
sci2_init();
#else
sci1_init();
#endif
TimerInit();
/* Init polling global variable */
POLL_init();
DisableInterrupts;
status = _usb_host_init(HOST_CONTROLLER_NUMBER, /* Use value in header file */
MAX_FRAME_SIZE, /* Frame size per USB spec */
&host_handle); /* Returned pointer */
if(status != USB_OK)
{
printf("\nUSB Host Initialization failed! STATUS: 0x%x",(unsigned int) status);
fflush(stdout);
exit(1);
}
/*
** Since we are going to act as the host driver, register the driver
** information for wanted class/subclass/protocols
*/
status = _usb_host_driver_info_register(host_handle, (void *)DriverInfoTable);
if(status != USB_OK)
{
printf("\nUSB Initialization driver info failed! STATUS: 0x%x", status);
fflush(stdout);
exit(1);
}
EnableInterrupts;
printf("\nUSB Printer Host Demo\nWaiting for USB printer to be attached...\n");
fflush(stdout);
for(;;)
{
Poll();
Printer_Task(NULL);
__RESET_WATCHDOG(); /* feeds the dog */
} /* Loop forever */
/* Please make sure that you never leave main */
#ifdef __GNUC__
return 0;
#endif
}
void main(void)
#endif
{
/* Initialize the current platform. Call for the _bsp_platform_init which is specific to each processor family */
_bsp_platform_init();
#ifdef MCU_MK70F12
sci2_init();
#else
sci1_init();
#endif
TimerInit();
/* Init polling global variable */
POLL_init();
/* event for USB callback signaling */
_usb_event_init(&USB_Event);
DisableInterrupts;
#if (defined _MCF51MM256_H) || (defined _MCF51JE256_H)
usb_int_dis();
#endif
ApplicationInit();
EnableInterrupts;
#if (defined _MCF51MM256_H) || (defined _MCF51JE256_H)
usb_int_en();
#endif
fflush(stdout);
/*
** Infinite loop, waiting for events requiring action
*/
for(;;)
{
Poll();
Main_App_Task();
__RESET_WATCHDOG(); /* feeds the dog */
}
#ifdef __GNUC__
return 0;
#endif
}
void main(void)
#endif
{
USB_STATUS status = USB_OK;
_usb_host_handle host_handle;
/* Initialize the current platform. Call for the _bsp_platform_init which is specific to each processor family */
_bsp_platform_init();
#ifdef MCU_MK70F12
sci2_init();
#else
sci1_init();
#endif
TimerInit();
/* Init polling global variable */
POLL_init();
DisableInterrupts;
#if (defined _MCF51MM256_H) || (defined _MCF51JE256_H)
usb_int_dis();
#endif
status = _usb_host_init
(HOST_CONTROLLER_NUMBER, /* Use value in header file */
MAX_FRAME_SIZE, /* Frame size per USB spec */
&host_handle); /* Returned pointer */
if (status != USB_OK)
{
printf("\nUSB Host Initialization failed. STATUS: 0x%x", (unsigned int) status);
} /* Endif */
/*
** Since we are going to act as the host driver, register
** the driver information for wanted class/subclass/protocols
*/
status = _usb_host_driver_info_register(host_handle, (void *)DriverInfoTable);
if (status != USB_OK)
{
printf("\nDriver Registration failed. STATUS: 0x%x", (unsigned int)status);
}
EnableInterrupts;
#if (defined _MCF51MM256_H) || (defined _MCF51JE256_H)
usb_int_en();
#endif
pCmd.CBW_PTR = (CBW_STRUCT_PTR)USB_mem_alloc_word_aligned(sizeof(CBW_STRUCT));
if (pCmd.CBW_PTR == NULL)
{
printf ("\nUnable to allocate Command Block Wrapper!");
}
memset(pCmd.CBW_PTR, 0, sizeof(CBW_STRUCT));
pCmd.CSW_PTR = (CSW_STRUCT_PTR)USB_mem_alloc_word_aligned(sizeof(CSW_STRUCT));
if (pCmd.CSW_PTR == NULL)
{
printf ("\nUnable to allocate Command Status Wrapper!");
}
memset(pCmd.CSW_PTR, 0, sizeof(CSW_STRUCT));
printf("\nUSB MSD Command test\nWaiting for USB mass storage to be attached...\n");
for(;;)
{
Main_Task();
Poll();
__RESET_WATCHDOG(); /* feeds the dog */
} /* loop forever */
/* please make sure that you never leave main */
#ifdef __GNUC__
return 0;
#endif
}
void main_usb(void)
#endif
{
USB_STATUS status = USB_OK;
_usb_host_handle host_handle;
/* Initialize the current platform. Call for the _bsp_platform_init which is specific to each processor family */
_bsp_platform_init();
#if 0 /* << EST */
#ifdef MCU_MK70F12
sci2_init();
#else
sci1_init();
#endif
TimerInit();
#endif
/* Init polling global variable */
POLL_init();
DisableInterrupts;
#if (defined _MCF51MM256_H) || (defined _MCF51JE256_H)
usb_int_dis();
#endif
/*
** It means that we are going to act like host, so we initialize the
** host stack. This call will allow USB system to allocate memory for
** data structures, it uses later (e.g pipes etc.).
*/
status = _usb_host_init (
HOST_CONTROLLER_NUMBER, /* Use value in header file */
MAX_FRAME_SIZE, /* Frame size per USB spec */
&host_handle); /* Returned pointer */
if (status != USB_OK)
{
#if 0 /* << EST */
printf("\nUSB Host Initialization failed. STATUS: %%x",(unsigned int) status);
fflush(stdout);
#endif
exit(3);
}
status = _usb_host_driver_info_register (
host_handle,
(void *)DriverInfoTable
);
if (status != USB_OK)
{
#if 0 /* << EST */
printf("\nDriver Registration failed. STATUS: %%x", (unsigned int)status);
fflush(stdout);
#endif
exit(4);
}
EnableInterrupts;
#if (defined _MCF51MM256_H) || (defined _MCF51JE256_H)
usb_int_en();
#endif
#if 0 /* << EST */
printf("\fInitialization passed. Plug-in CDC device to USB port.\nUse ttyb: as the in/out port for CDC device data.\n");
#endif
_usb_event_init(&device_registered);
uart2usb_num = usb2uart_num = 0; /* reset number of bytes in buffers */
#if 0 /* << EST */
f_usb = (FILE_CDC_PTR)malloc(sizeof(FILE_CDC));
memset(f_usb, 0, sizeof(FILE_CDC));
#else
f_usb = (FILE_CDC_PTR)USB_mem_alloc_zero(sizeof(FILE_CDC));
#endif
f_usb->DEV_PTR = (IO_DEVICE_STRUCT_PTR)USB_mem_alloc_word_aligned(sizeof(IO_DEVICE_STRUCT));
for(;;)
{
Poll();
CDC_Task();
#if 0 /* << EST */
__RESET_WATCHDOG(); /* feeds the dog */
#endif
} /* loop forever */
/* please make sure that you never leave main */
#ifdef __GNUC__
return 0;
#endif
}
void main(void)
#endif
{
USB_STATUS status = USB_OK;
_usb_host_handle host_handle;
boolean send = TRUE;
/* Initialize the current platform. Call for the _bsp_platform_init which is specific to each processor family */
_bsp_platform_init();
#ifdef MCU_MK70F12
sci2_init();
#else
sci1_init();
#endif
TimerInit();
/* Init polling global variable */
POLL_init();
#if (defined(_MCF51MM256_H) || (defined _MCF51JE256_H))
cmt_init();
Mcu_Init();
Kbi_Init();
pwm_init();
#endif
#if (defined(__MCF52259_H__) || (defined (__MCF52221_H__)) ||(defined (_MK_xxx_H_)) )
GPIO_Init();
pit0_init();
pwm_init();
#endif
#if (defined MCU_mcf51jf128)
GPIO_Init();
mtim_init();
pwm_init();
#endif
DisableInterrupts;
#if (defined _MCF51MM256_H) || (defined _MCF51JE256_H)
usb_int_dis();
#endif
/*
** It means that we are going to act like host, so we initialize the
** host stack. This call will allow USB system to allocate memory for
** data structures, it uses later (e.g pipes etc.).
*/
status = _usb_host_init (
HOST_CONTROLLER_NUMBER, /* Use value in header file */
MAX_FRAME_SIZE, /* Frame size per USB spec */
&host_handle); /* Returned pointer */
if (status != USB_OK)
{
printf("\nUSB Host Initialization failed! STATUS: 0x%x", (unsigned int) status);
fflush(stdout);
exit(3);
}
status = _usb_host_driver_info_register (
host_handle,
(pointer)DriverInfoTable
);
if (status != USB_OK)
{
printf("\nDriver Registration failed! STATUS: 0x%x",(unsigned int) status);
fflush(stdout);
exit(4);
}
EnableInterrupts;
#if (defined _MCF51MM256_H) || (defined _MCF51JE256_H)
usb_int_en();
#endif
printf("USB Host Audio Demo\r\nWaitting for USB Audio Device to be attached...\r\n");
_usb_event_init(&USB_Event);
for(;;)
{
Poll();
Audio_Task();
__RESET_WATCHDOG(); /* feeds the dog */
} /* loop forever */
/* please make sure that you never leave main */
#ifdef __GNUC__
return 0;
#endif
}