static inline bool scsi_cmd_prevent_allow_medium_removal(SCSI* scsi)
{
bool res = false;
if (scsi->cmd.cmd_type == SCSI_CMD_6)
{
switch (scsi->cmd.len)
{
case 0:
case 1:
storage_enable_media_removal(scsi->storage);
res = true;
break;
case 2:
case 3:
storage_disable_media_removal(scsi->storage);
res = true;
break;
}
}
else
scsi_error(scsi, SENSE_KEY_ILLEGAL_REQUEST, ASQ_CDB_DECRYPTION_ERROR);
#if (SCSI_DEBUG_FLOW)
printf("SCSI prevent/allow medium removal: %d\n\r", scsi->cmd.len);
#endif
return res;
}
int
do_rtpg(int fd, void* resp, long resplen, unsigned int timeout)
{
struct rtpg_command cmd;
struct sg_io_hdr hdr;
unsigned char sense[SENSE_BUFF_LEN];
memset(&cmd, 0, sizeof(cmd));
cmd.op = OPERATION_CODE_RTPG;
rtpg_command_set_service_action(&cmd);
set_uint32(cmd.length, resplen);
PRINT_HEX((unsigned char *) &cmd, sizeof(cmd));
memset(&hdr, 0, sizeof(hdr));
hdr.interface_id = 'S';
hdr.cmdp = (unsigned char *) &cmd;
hdr.cmd_len = sizeof(cmd);
hdr.dxfer_direction = SG_DXFER_FROM_DEV;
hdr.dxferp = resp;
hdr.dxfer_len = resplen;
hdr.mx_sb_len = sizeof(sense);
hdr.sbp = sense;
hdr.timeout = get_prio_timeout(timeout, SGIO_TIMEOUT);
if (ioctl(fd, SG_IO, &hdr) < 0)
return -RTPG_RTPG_FAILED;
if (scsi_error(&hdr)) {
PRINT_DEBUG("do_rtpg: SCSI error!\n");
return -RTPG_RTPG_FAILED;
}
PRINT_HEX(resp, resplen);
return 0;
}
static inline bool scsi_cmd_request_sense(SCSI* scsi)
{
bool res = false;
//f**ing microsoft suppose, that is SCSI 12 command. WTF???
if (scsi->cmd.cmd_type == SCSI_CMD_6 || scsi->cmd.cmd_type == SCSI_CMD_12)
{
uint8_t code;
uint16_t asq;
if (scsi->error_head != scsi->error_tail)
{
code = scsi->error_queue[scsi->error_tail].code;
asq = scsi->error_queue[scsi->error_tail].asq;
scsi->error_tail = (scsi->error_tail + 1) & SCSI_ERROR_BUF_MASK;
}
//empty queue
else
{
code = SENSE_KEY_NO_SENSE;
asq = ASQ_NO_ADDITIONAL_SENSE_INFORMATION;
}
scsi_fill_error_page(scsi, code, asq);
res = true;
#if (SCSI_DEBUG_FLOW)
printf("SCSI request sense 0x%02X, ASQ: 0x%04X\n\r", code, asq);
#endif
}
else
scsi_error(scsi, SENSE_KEY_ILLEGAL_REQUEST, ASQ_CDB_DECRYPTION_ERROR);
return res;
}
static inline bool scsi_cmd_inquiry(SCSI* scsi)
{
bool res = false;
if (scsi->cmd.cmd_type == SCSI_CMD_6)
{
//vital data page request
if (scsi->cmd.flags & SCSI_INQUIRY_EVPD)
{
switch (scsi->cmd.address)
{
case INQUIRY_VITAL_PAGE_SUPPORTED_PAGES:
scsi_fill_evpd_page_00(scsi);
res = true;
break;
case INQUIRY_VITAL_PAGE_DEVICE_INFO:
scsi_fill_evpd_page_83(scsi);
res = true;
break;
case INQUIRY_VITAL_PAGE_SERIAL_NUM:
scsi_fill_evpd_page_80(scsi);
res = true;
break;
default:
break;
}
#if (SCSI_DEBUG_FLOW)
printf("SCSI: inquiry vital data page %02X\n\r", scsi->cmd.address);
#endif
}
//standart inquiry
else
{
scsi_fill_standart_inquiry_page(scsi);
#if (SCSI_DEBUG_FLOW)
printf("SCSI: standart inquiry\n\r");
#endif
res = true;
}
if (!res)
scsi_error(scsi, SENSE_KEY_ILLEGAL_REQUEST, ASQ_INVALID_FIELD_IN_CDB);
}
else
scsi_error(scsi, SENSE_KEY_ILLEGAL_REQUEST, ASQ_CDB_DECRYPTION_ERROR);
return res;
}
static inline bool scsi_cmd_read_capacity(SCSI* scsi)
{
bool res = false;
if (scsi->cmd.cmd_type == SCSI_CMD_10)
{
if (storage_check_media(scsi->storage))
{
res = true;
scsi_fill_capacity_page(scsi);
#if (SCSI_DEBUG_FLOW)
printf("SCSI: read capacity 0x%08X sectors, sector size: %d\n\r", storage_get_media_descriptor(scsi->storage)->num_sectors,
storage_get_device_descriptor(scsi->storage)->sector_size);
#endif
}
else
scsi_error(scsi, SENSE_KEY_NOT_READY, ASQ_MEDIUM_NOT_PRESENT);
}
else
scsi_error(scsi, SENSE_KEY_ILLEGAL_REQUEST, ASQ_CDB_DECRYPTION_ERROR);
return res;
}
static inline bool scsi_cmd_verify16(SCSI* scsi)
{
bool res = false;
if (scsi->cmd.cmd_type == SCSI_CMD_16)
res = scsi_verify(scsi, scsi->cmd.additional_data, scsi->cmd.len);
else
scsi_error(scsi, SENSE_KEY_ILLEGAL_REQUEST, ASQ_CDB_DECRYPTION_ERROR);
#if (SCSI_DEBUG_FLOW)
printf("SCSI verify16 0x%08X, %x sector(s)\n\r", scsi->cmd.address, scsi->cmd.len);
#endif
return res;
}
static inline bool scsi_cmd_write12(SCSI* scsi)
{
bool res = false;
if (scsi->cmd.cmd_type == SCSI_CMD_12)
res = scsi_write(scsi, scsi->cmd.address, scsi->cmd.len);
else
scsi_error(scsi, SENSE_KEY_ILLEGAL_REQUEST, ASQ_CDB_DECRYPTION_ERROR);
#if (SCSI_DEBUG_FLOW)
printf("SCSI write12 0x%08X, %d sector(s)\n\r", scsi->cmd.address, scsi->cmd.len);
#endif //SCSI_DEBUG_FLOW
return res;
}
static inline bool scsi_cmd_read6(SCSI* scsi)
{
bool res = false;
if (scsi->cmd.cmd_type == SCSI_CMD_6)
res = scsi_read(scsi, scsi->cmd.address, scsi->cmd.len ? scsi->cmd.len : 256);
else
scsi_error(scsi, SENSE_KEY_ILLEGAL_REQUEST, ASQ_CDB_DECRYPTION_ERROR);
#if (SCSI_DEBUG_FLOW)
printf("SCSI read6 0x%08X, %x sector(s)\n\r", scsi->cmd.address, scsi->cmd.len ? scsi->cmd.len : 256);
#endif
return res;
}
static inline bool scsi_cmd_synchronize_cache(SCSI* scsi)
{
bool res = false;
if (scsi->cmd.cmd_type == SCSI_CMD_10)
{
storage_write_cache(scsi->storage);
res = true;
#if (SCSI_DEBUG_FLOW)
printf("SCSI: synchronize cache\n\r");
#endif
}
else
scsi_error(scsi, SENSE_KEY_ILLEGAL_REQUEST, ASQ_CDB_DECRYPTION_ERROR);
return res;
}
static inline bool scsi_cmd_mode_select6(SCSI* scsi)
{
bool res = false;
if (scsi->cmd.cmd_type == SCSI_CMD_6)
{
switch((scsi->cmd.address >> 8) & 0x3f)
{
case 0x1c:
res = true;
break;
default:
scsi_error(scsi, SENSE_KEY_ILLEGAL_REQUEST, ASQ_INVALID_FIELD_IN_CDB);
#if (SCSI_DEBUG_UNSUPPORTED)
printf("SCSI: Mode select: unsupported page 0x%02X\n\r", (scsi->cmd.address >> 8) & 0x3f);
#endif
}
}
else
/*
* Helper function to setup and run a SCSI inquiry command.
*/
int
do_inquiry(int fd, int evpd, unsigned int codepage,
void *resp, int resplen, unsigned int timeout)
{
struct inquiry_command cmd;
struct sg_io_hdr hdr;
unsigned char sense[SENSE_BUFF_LEN];
memset(&cmd, 0, sizeof(cmd));
cmd.op = OPERATION_CODE_INQUIRY;
if (evpd) {
inquiry_command_set_evpd(&cmd);
cmd.page = codepage;
}
set_uint16(cmd.length, resplen);
PRINT_HEX((unsigned char *) &cmd, sizeof(cmd));
memset(&hdr, 0, sizeof(hdr));
hdr.interface_id = 'S';
hdr.cmdp = (unsigned char *) &cmd;
hdr.cmd_len = sizeof(cmd);
hdr.dxfer_direction = SG_DXFER_FROM_DEV;
hdr.dxferp = resp;
hdr.dxfer_len = resplen;
hdr.sbp = sense;
hdr.mx_sb_len = sizeof(sense);
hdr.timeout = get_prio_timeout(timeout, SGIO_TIMEOUT);
if (ioctl(fd, SG_IO, &hdr) < 0) {
PRINT_DEBUG("do_inquiry: IOCTL failed!\n");
return -RTPG_INQUIRY_FAILED;
}
if (scsi_error(&hdr)) {
PRINT_DEBUG("do_inquiry: SCSI error!\n");
return -RTPG_INQUIRY_FAILED;
}
PRINT_HEX((unsigned char *) resp, resplen);
return 0;
}
/** Sends a SCSI command to the drive, receives reply and evaluates wether
the command succeeded or shall be retried or finally failed.
Returned SCSI errors shall not lead to a return value indicating failure.
The callers get notified by c->error. An SCSI failure which leads not to
a retry shall be notified via scsi_notify_error().
The Libburn_log_sg_commandS facility might be of help when problems with
a drive have to be examined. It shall stay disabled for normal use.
@return: 1 success , <=0 failure
*/
int sg_issue_command(struct burn_drive *d, struct command *c)
{
int done = 0;
int err;
union ccb *ccb;
if (d->cam == NULL) {
c->error = 0;
return 0;
}
c->error = 0;
ccb = cam_getccb(d->cam);
cam_fill_csio(&ccb->csio,
1, /* retries */
NULL, /* cbfncp */
CAM_DEV_QFRZDIS, /* flags */
MSG_SIMPLE_Q_TAG, /* tag_action */
NULL, /* data_ptr */
0, /* dxfer_len */
sizeof (ccb->csio.sense_data), /* sense_len */
0, /* cdb_len */
30*1000); /* timeout */
switch (c->dir) {
case TO_DRIVE:
ccb->csio.ccb_h.flags |= CAM_DIR_OUT;
break;
case FROM_DRIVE:
ccb->csio.ccb_h.flags |= CAM_DIR_IN;
break;
case NO_TRANSFER:
ccb->csio.ccb_h.flags |= CAM_DIR_NONE;
break;
}
ccb->csio.cdb_len = c->oplen;
memcpy(&ccb->csio.cdb_io.cdb_bytes, &c->opcode, c->oplen);
if (c->page) {
ccb->csio.data_ptr = c->page->data;
if (c->dir == FROM_DRIVE) {
ccb->csio.dxfer_len = BUFFER_SIZE;
/* touch page so we can use valgrind */
memset(c->page->data, 0, BUFFER_SIZE);
} else {
/* ts A61115: removed a ssert() */
if(c->page->bytes <= 0)
return 0;
ccb->csio.dxfer_len = c->page->bytes;
}
} else {
ccb->csio.data_ptr = NULL;
ccb->csio.dxfer_len = 0;
}
do {
memset(&ccb->csio.sense_data, 0, sizeof(ccb->csio.sense_data));
err = cam_send_ccb(d->cam, ccb);
if (err == -1) {
libdax_msgs_submit(libdax_messenger,
d->global_index, 0x0002010c,
LIBDAX_MSGS_SEV_FATAL, LIBDAX_MSGS_PRIO_HIGH,
"Failed to transfer command to drive",
errno, 0);
cam_freeccb(ccb);
sg_close_drive(d);
d->released = 1;
d->busy = BURN_DRIVE_IDLE;
c->error = 1;
return -1;
}
/* XXX */
memcpy(c->sense, &ccb->csio.sense_data, ccb->csio.sense_len);
if ((ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP) {
if (!c->retry) {
c->error = 1;
cam_freeccb(ccb);
return 1;
}
switch (scsi_error(d, c->sense, 0)) {
case RETRY:
done = 0;
break;
case FAIL:
done = 1;
c->error = 1;
break;
}
} else {
done = 1;
}
} while (!done);
cam_freeccb(ccb);
return 1;
}
/*ARGSUSED*/
scsi_ret_t
scdisk_open(
target_info_t *tgt,
io_req_t req)
{
register int i;
register scsi_ret_t ret = SCSI_RET_SUCCESS;
unsigned int disk_size, secs_per_cyl, sector_size;
unsigned int nsectors, ntracks, ncylinders;
scsi_rcap_data_t *cap;
struct disklabel *label = 0;
io_req_t ior;
void (*readfun)(
target_info_t *tgt,
unsigned int secno,
io_req_t ior) = scdisk_read;
char *data, *rdata = 0;
boolean_t look_for_label;
if (tgt->flags & TGT_ONLINE)
return SCSI_RET_SUCCESS;
tgt->lun = rzlun(req->io_unit);
/*
* Dummy ior for proper sync purposes
*/
io_req_alloc(ior);
bzero((char *)ior, sizeof(*ior));
simple_lock_init(&(ior)->io_req_lock, ETAP_IO_REQ);
#if 0
/*
* Set the LBN to tgt->block_size with a MODE SELECT.
* xxx do a MODE SENSE instead ?
*/
/*
* Ugh. Can't use tgt->block_size here -- not set up
* yet. Also can't use DEV_BSIZE. So...since MK6
* dispenses with this command entirely, let's do
* so as well.
*/
for (i = 0; i < 5; i++) {
ior->io_op = IO_INTERNAL;
ior->io_error = 0;
ret = scdisk_mode_select(tgt, tgt->block_size, ior,0,0,FALSE);
if (ret == SCSI_RET_SUCCESS)
break;
if (ret == SCSI_RET_RETRY) {
timeout((timeout_fcn_t)wakeup, tgt, 2*hz);
await(tgt);
}
if (ret == SCSI_RET_DEVICE_DOWN)
goto done;
}
if (ret != SCSI_RET_SUCCESS) {
scsi_error( tgt, SCSI_ERR_MSEL, ret, 0);
ret = D_INVALID_SIZE;
goto done;
}
#endif
#ifdef hp_pa
if (tgt->flags & TGT_REMOVABLE_MEDIA) {
scsi_mode_sense_page5_t *page5;
unsigned char mode_save[0xff];
scsi_mode_select_param_t *parm;
int length;
if((ret = scsi_mode_sense(tgt, 0x05, 0xff, 0))
!= SCSI_RET_SUCCESS)
goto done;
length = *tgt->cmd_ptr + 1;
bcopy(tgt->cmd_ptr, mode_save, length);
page5 = (scsi_mode_sense_page5_t *)(mode_save + 4 + mode_save[3]);
#if 1
/* force sector size to 512 */
parm = (scsi_mode_select_param_t *)mode_save;
parm->reserved1 = 0;
parm->medium_type = 2;
parm->device_spec &= ~0x90;
parm->descs[0].density_code = 2;
parm->descs[0].nblocks1 = 0;
parm->descs[0].nblocks2 = 0;
parm->descs[0].nblocks3 = 0;
parm->descs[0].reclen1 = 0x2;
parm->descs[0].reclen2 = 0;
parm->descs[0].reclen3 = 0;
page5->ps = 0;
page5->page_code &= ~0x80;
page5->sectors_per_track = page5->sectors_per_track *
(page5->bytes_per_sector_msb << 8 |
page5->bytes_per_sector_lsb) /
512;
page5->bytes_per_sector_msb = 2;
page5->bytes_per_sector_lsb = 0;
length -= parm->desc_len;
parm->desc_len = 0;
bcopy((const char*)page5, mode_save+4, sizeof(*page5));
if((ret = scdisk_mode_select(tgt, 0, 0, mode_save, length, 0))
!= SCSI_RET_SUCCESS)
goto done;
if((ret = scsi_mode_sense(tgt, 0x05, 0xff, 0))
!= SCSI_RET_SUCCESS)
goto done;
length = *tgt->cmd_ptr + 1;
bcopy(tgt->cmd_ptr, mode_save, length);
#endif
ntracks = page5->number_of_heads;
nsectors = page5->sectors_per_track;
sector_size = page5->bytes_per_sector_msb << 8 |
page5->bytes_per_sector_lsb;
ncylinders = page5->number_of_cylinders_msb << 8 |
page5->number_of_cylinders_lsb;
secs_per_cyl = nsectors * ntracks;
look_for_label = FALSE;
geom_done = TRUE;
}
#endif
/*
* Do a READ CAPACITY to get max size. Check LBN too.
*/
for (i = 0; i < 5; i++) {
ior->io_op = IO_INTERNAL;
ior->io_error = 0;
ret = scsi_read_capacity(tgt, 0, ior);
if (ret == SCSI_RET_SUCCESS)
break;
if (ret == SCSI_RET_RETRY) {
timeout((timeout_fcn_t)wakeup, tgt, 2*hz);
await(tgt);
}
if (ret == SCSI_RET_DEVICE_DOWN)
goto done;
}
if (ret != SCSI_RET_SUCCESS) {
scsi_error( tgt, SCSI_ERR_MSEL, ret, 0);
ret = D_INVALID_SIZE;
goto done;
}
cap = (scsi_rcap_data_t*) tgt->cmd_ptr;
disk_size = (cap->lba1<<24) |
(cap->lba2<<16) |
(cap->lba3<< 8) |
cap->lba4 + 1;
if (scsi_debug)
printf("rz%d holds %d blocks\n", tgt->unit_no, disk_size);
tgt->block_size = (cap->blen1<<24) |
(cap->blen2<<16) |
(cap->blen3<<8 ) |
cap->blen4;
if (scsi_debug) {
printf("rz%d block size is %d bytes/block\n",
tgt->unit_no, tgt->block_size);
}
if (tgt->block_size > RZDISK_MAX_SECTOR || tgt->block_size <= 0) {
ret = D_INVALID_SIZE;
goto done;
}
rdata = (char *) kalloc(2*tgt->block_size);
if (round_page(rdata) == round_page(rdata + tgt->block_size))
data = rdata;
else
data = (char *)round_page(rdata);
#ifdef POWERMAC
/* XXX TODO NMGS remove! must be cache aligned for now */
if ((unsigned long)data & 0x1f)
data = (char*)((unsigned long)(data + 0x1f) & ~0x1f);
if (round_page(data) != round_page(data + tgt->block_size))
data = (char *)round_page(data);
#endif /* POWERMAC */
if (disk_size > SCSI_CMD_READ_MAX_LBA)
tgt->flags |= TGT_BIG;
/*
* Mandatory long-form commands ?
*/
if (BGET(scsi_use_long_form,(unsigned char)tgt->masterno,tgt->target_id))
tgt->flags |= TGT_BIG;
if (tgt->flags & TGT_BIG)
readfun = scsi_long_read;
ior->io_op = IO_INTERNAL;
ior->io_error = 0;
#ifdef hp_pa
if(geom_done)
goto setup_label;
#endif
/*
* Find out about the phys disk geometry
*/
#if PARAGON860
/*
* The NCR RAID controller does not support a read capacity command
* with the Partial Medium Indicator (PMI) bit set. Therefore we
* have to calculate the number of sectors per cylinder from data
* in the mode select pages. This method should work for standalone
* disks as well.
*/
/*
* Read page 3 to find the number of sectors/track and bytes/sector
*/
ret = scsi_mode_sense(tgt, 0x03, 0xff, ior);
/* scsi_error(...) */
{
scsi_mode_sense_page3_t *page3;
page3 = (scsi_mode_sense_page3_t *)
(((scsi_mode_sense_data_t *)tgt->cmd_ptr) + 1);
nsectors = (page3->sectors_per_track_msb << 8) |
page3->sectors_per_track_lsb;
sector_size = (page3->bytes_per_sector_msb << 8) |
page3->bytes_per_sector_lsb;
}
ior->io_op = IO_INTERNAL;
ior->io_error = 0;
/*
* Read page 4 to find the number of cylinders and tracks/cylinder
*/
ret = scsi_mode_sense(tgt, 0x04, 0xff, ior);
/* scsi_error(...) */
{
scsi_mode_sense_page4_t *page4;
page4 = (scsi_mode_sense_page4_t *)
(((scsi_mode_sense_data_t *)tgt->cmd_ptr) + 1);
ncylinders = (page4->number_of_cylinders_msb << 16) |
(page4->number_of_cylinders << 8) |
page4->number_of_cylinders_lsb;
ntracks = page4->number_of_heads;
}
/*
* Calculate the sectors per cylinder (sec/track * tracks/cyl)
*/
secs_per_cyl = nsectors * ntracks;
if (scsi_debug) {
printf("rz%d: %d bytes/sec %d sec/track\n", tgt->unit_no,
sector_size, nsectors);
printf(" %d tracks/cyl %d cyl/unit\n",
ntracks, ncylinders);
}
#else /* PARAGON860 */
/* Read page one to get read / write error recovery info */
ret = scsi_mode_sense(tgt, 0x01, 0xff, ior);
if(ret == SCSI_RET_SUCCESS) {
scsi_mode_sense_page1_t *page1;
unsigned char mode_save[0xff];
int length;
length = *tgt->cmd_ptr + 1;
bcopy(tgt->cmd_ptr, mode_save, length);
page1 = (scsi_mode_sense_page1_t *)(mode_save + 4 + mode_save[3]);
*mode_save = 0; /* mode data length */
page1->ps = 0;
page1->flags = PAGE1_AWRE | PAGE1_ARRE | PAGE1_TB | PAGE1_PER;
/*
* Enable automatic reallocation of bad blocks,
* Report any recovered errors.
*/
ior->io_op = IO_INTERNAL;
ior->io_error = 0;
ret = scdisk_mode_select(tgt, 0, ior, mode_save, length, 0);
if(ret != SCSI_RET_SUCCESS) {
if (scsi_debug)
printf("rz%d: Can't change error recovery parameters\n",
tgt->unit_no);
}
}
ior->io_op = IO_INTERNAL;
ior->io_error = 0;
#ifdef POWERMAC
tgt->flags |= TGT_OPTIONAL_CMD;
#endif
ret = scsi_read_capacity( tgt, 1, ior);
#ifdef POWERMAC
tgt->flags &= ~TGT_OPTIONAL_CMD;
#endif
/* scsi_error(...) */
if (ret) {
secs_per_cyl = 16;
sector_size = tgt->block_size;
} else {
cap = (scsi_rcap_data_t*) tgt->cmd_ptr;
secs_per_cyl = (cap->lba1<<24) | (cap->lba2<<16) |
(cap->lba3<< 8) | cap->lba4;
secs_per_cyl += 1;
sector_size = (cap->blen1<<24) | (cap->blen2<<16) |
(cap->blen3<<8 ) | cap->blen4;
}
if (scsi_debug)
printf("rz%d: %d sect/cyl %d bytes/sec\n", tgt->unit_no,
secs_per_cyl, sector_size);
#endif /* PARAGON860 */
#if NSCSI2 > 0
/*
* ... and a bunch of other things for scsi2
*/
#endif /* NSCSI2 > 0 */
/*
* Get partition table off pack
*/
if (tgt->dev_ops == &scsi_devsw[SCSI_CDROM]) {
/* no label on a CD-ROM */
look_for_label = FALSE;
} else {
look_for_label = TRUE;
}
setup_label:
if (look_for_label) {
/* first look for a BSD label */
ior->io_data = data;
ior->io_count = tgt->block_size;
ior->io_op = IO_READ;
ior->io_error = 0;
tgt->ior = ior;
(*readfun)( tgt, LABELOFFSET/tgt->block_size, ior);
iowait(ior);
if (!ior->io_error) {
/* Search for BSD label, might be a bit further along */
register int j;
for (i = LABELOFFSET % tgt->block_size;
i < (tgt->block_size-sizeof(struct disklabel));
i += sizeof(int)) {
label = (struct disklabel *) &data[i];
if (label->d_magic == DISKMAGIC &&
label->d_magic2 == DISKMAGIC) {
break;
} else
label = (struct disklabel *) 0;
}
}
} else {
label = (struct disklabel *) 0;
}
if (label) {
if (scsi_debug)
printf("{Using BSD label}");
tgt->dev_info.disk.l = *label;
} else {
/* then look for a vendor's label, but first
fill in defaults and what we found */
label = &tgt->dev_info.disk.l;
*label = scsi_default_label;
label->d_secsize = sector_size;
label->d_nsectors = nsectors;
label->d_ntracks = ntracks;
label->d_ncylinders = ncylinders;
label->d_secpercyl = secs_per_cyl;
label->d_secperunit = disk_size;
ior->io_data = data;
if (!look_for_label || !rz_vendor_label(tgt, label, ior)) {
if (look_for_label) {
printf("%s rz%d, %s\n",
"WARNING: No valid disk label on",
tgt->unit_no,
"using defaults");
}
/* Validate partitions a and c for initialization */
tgt->dev_info.disk.l.d_partitions[0].p_offset = 0;
tgt->dev_info.disk.l.d_partitions[0].p_size = disk_size;
tgt->dev_info.disk.l.d_partitions[2].p_offset = 0;
tgt->dev_info.disk.l.d_partitions[2].p_size = disk_size;
tgt->dev_info.disk.l.d_partitions[MAXPARTITIONS].p_offset = 0;
tgt->dev_info.disk.l.d_partitions[MAXPARTITIONS].p_size = -1;
}
label->d_checksum = 0;
label->d_checksum = dkcksum(label);
}
ret = SCSI_RET_SUCCESS;
done:
if (rdata)
kfree((vm_offset_t) rdata, 2 * tgt->block_size);
io_req_free(ior);
return ret;
}
