static int sdi_display_enable(struct omap_dss_device *dssdev)
{
struct sdi_device *sdi = dssdev_to_sdi(dssdev);
struct videomode *vm = &sdi->vm;
unsigned long fck;
struct dispc_clock_info dispc_cinfo;
unsigned long pck;
int r;
if (!sdi->output.dispc_channel_connected) {
DSSERR("failed to enable display: no output/manager\n");
return -ENODEV;
}
r = regulator_enable(sdi->vdds_sdi_reg);
if (r)
goto err_reg_enable;
r = dispc_runtime_get(sdi->dss->dispc);
if (r)
goto err_get_dispc;
/* 15.5.9.1.2 */
vm->flags |= DISPLAY_FLAGS_PIXDATA_POSEDGE | DISPLAY_FLAGS_SYNC_POSEDGE;
r = sdi_calc_clock_div(sdi, vm->pixelclock, &fck, &dispc_cinfo);
if (r)
goto err_calc_clock_div;
sdi->mgr_config.clock_info = dispc_cinfo;
pck = fck / dispc_cinfo.lck_div / dispc_cinfo.pck_div;
if (pck != vm->pixelclock) {
DSSWARN("Could not find exact pixel clock. Requested %lu Hz, got %lu Hz\n",
vm->pixelclock, pck);
vm->pixelclock = pck;
}
dss_mgr_set_timings(&sdi->output, vm);
r = dss_set_fck_rate(sdi->dss, fck);
if (r)
goto err_set_dss_clock_div;
sdi_config_lcd_manager(sdi);
/*
* LCLK and PCLK divisors are located in shadow registers, and we
* normally write them to DISPC registers when enabling the output.
* However, SDI uses pck-free as source clock for its PLL, and pck-free
* is affected by the divisors. And as we need the PLL before enabling
* the output, we need to write the divisors early.
*
* It seems just writing to the DISPC register is enough, and we don't
* need to care about the shadow register mechanism for pck-free. The
* exact reason for this is unknown.
*/
dispc_mgr_set_clock_div(sdi->dss->dispc, sdi->output.dispc_channel,
&sdi->mgr_config.clock_info);
dss_sdi_init(sdi->dss, sdi->datapairs);
r = dss_sdi_enable(sdi->dss);
if (r)
goto err_sdi_enable;
mdelay(2);
r = dss_mgr_enable(&sdi->output);
if (r)
goto err_mgr_enable;
return 0;
err_mgr_enable:
dss_sdi_disable(sdi->dss);
err_sdi_enable:
err_set_dss_clock_div:
err_calc_clock_div:
dispc_runtime_put(sdi->dss->dispc);
err_get_dispc:
regulator_disable(sdi->vdds_sdi_reg);
err_reg_enable:
return r;
}
static int sdi_display_enable(struct omap_dss_device *dssdev)
{
struct omap_dss_device *out = &sdi.output;
struct omap_video_timings *t = &sdi.timings;
unsigned long fck;
struct dispc_clock_info dispc_cinfo;
unsigned long pck;
int r;
if (out == NULL || out->manager == NULL) {
DSSERR("failed to enable display: no output/manager\n");
return -ENODEV;
}
r = regulator_enable(sdi.vdds_sdi_reg);
if (r)
goto err_reg_enable;
r = dispc_runtime_get();
if (r)
goto err_get_dispc;
/* 15.5.9.1.2 */
t->data_pclk_edge = OMAPDSS_DRIVE_SIG_RISING_EDGE;
t->sync_pclk_edge = OMAPDSS_DRIVE_SIG_RISING_EDGE;
r = sdi_calc_clock_div(t->pixel_clock * 1000, &fck, &dispc_cinfo);
if (r)
goto err_calc_clock_div;
sdi.mgr_config.clock_info = dispc_cinfo;
pck = fck / dispc_cinfo.lck_div / dispc_cinfo.pck_div / 1000;
if (pck != t->pixel_clock) {
DSSWARN("Could not find exact pixel clock. Requested %d kHz, "
"got %lu kHz\n",
t->pixel_clock, pck);
t->pixel_clock = pck;
}
dss_mgr_set_timings(out->manager, t);
r = dss_set_fck_rate(fck);
if (r)
goto err_set_dss_clock_div;
sdi_config_lcd_manager(dssdev);
/*
* LCLK and PCLK divisors are located in shadow registers, and we
* normally write them to DISPC registers when enabling the output.
* However, SDI uses pck-free as source clock for its PLL, and pck-free
* is affected by the divisors. And as we need the PLL before enabling
* the output, we need to write the divisors early.
*
* It seems just writing to the DISPC register is enough, and we don't
* need to care about the shadow register mechanism for pck-free. The
* exact reason for this is unknown.
*/
dispc_mgr_set_clock_div(out->manager->id, &sdi.mgr_config.clock_info);
dss_sdi_init(sdi.datapairs);
r = dss_sdi_enable();
if (r)
goto err_sdi_enable;
mdelay(2);
r = dss_mgr_enable(out->manager);
if (r)
goto err_mgr_enable;
return 0;
err_mgr_enable:
dss_sdi_disable();
err_sdi_enable:
err_set_dss_clock_div:
err_calc_clock_div:
dispc_runtime_put();
err_get_dispc:
regulator_disable(sdi.vdds_sdi_reg);
err_reg_enable:
return r;
}
