void fsocket_reset(fsocket_t *fs) {
e_int32 ret;
if (fs->state) {
//任何时候，单条fake socket上不会发生并行请求，所以，这里只有一个等待中的请求。
//执行此句后，会因为返回值不正确，fake socket的所有者会检测异常，并退出请求过程
//中止fake socket调用。
ret = semaphore_timeoutwait(&fs->recv_sem, 1);
if (!ret) {
fs->buf[0] = 0;
semaphore_post(&fs->recv_sem); //让等待消息的队列清空
}
}
}
/*!
* @brief IO system shut down.
*
* When user wants to stop the codec system, this
* function call is needed, to release the interrupt
* signal, free the working buffer/code buffer/parameter
* buffer, unmap the register into user space, and
* close the codec device.
*
* @param none
*
* @return
* @li 0 System shutting down success.
* @li -1 System shutting down failure.
*/
int IOSystemShutdown(void)
{
/* Exit directly if already shutdown */
if (vpu_fd == -1)
return 0;
/* Make sure real shutdown is done when no instance needs
to access vpu in the same process */
if (vpu_active_num > 1) {
vpu_active_num--;
return 0;
} else if (!vpu_active_num) {
warn_msg(" No instance is actived\n");
return 0;
}
if (!semaphore_wait(vpu_semap, API_MUTEX)) {
err_msg("Unable to get mutex\n");
return -1;
}
/*
* Do not call IOFreePhyMem/IOFreePhyPicParaMem/IOFreePhyUserDataMem
* to free memory, let kernel do.
*/
#ifdef BUILD_FOR_ANDROID
if (bit_work_addr.virt_uaddr != 0) {
if (munmap((void *)bit_work_addr.virt_uaddr, bit_work_addr.size) != 0)
err_msg("munmap failed\n");
}
bit_work_addr.virt_uaddr = 0;
#else
IOFreeVirtMem(&bit_work_addr);
#endif
if (munmap((void *)vpu_reg_base, BIT_REG_MARGIN) != 0)
err_msg("munmap failed\n");
vpu_active_num--;
semaphore_post(vpu_semap, API_MUTEX);
vpu_semaphore_close(vpu_shared_mem);
if (vpu_fd >= 0) {
close(vpu_fd);
vpu_fd = -1;
}
return 0;
}
DECLARE_TEST( semaphore, initialize )
{
semaphore_t sem;
semaphore_initialize( &sem, 0 );
EXPECT_FALSE( semaphore_try_wait( &sem, 100 ) );
semaphore_destroy( &sem );
semaphore_initialize( &sem, 1 );
EXPECT_TRUE( semaphore_try_wait( &sem, 100 ) );
semaphore_post( &sem ); //Restored value
semaphore_destroy( &sem );
semaphore_initialize( &sem, 2 );
EXPECT_TRUE( semaphore_wait( &sem ) );
EXPECT_TRUE( semaphore_try_wait( &sem, 100 ) );
EXPECT_FALSE( semaphore_try_wait( &sem, 100 ) );
semaphore_post( &sem );
semaphore_post( &sem ); //Restored value
semaphore_destroy( &sem );
return 0;
}
bool fixed_queue_try_enqueue(fixed_queue_t *queue, void *data) {
assert(queue != NULL);
assert(data != NULL);
if (!semaphore_try_wait(queue->enqueue_sem))
return false;
pthread_mutex_lock(&queue->lock);
list_append(queue->list, data);
pthread_mutex_unlock(&queue->lock);
semaphore_post(queue->dequeue_sem);
return true;
}
void *fixed_queue_dequeue(fixed_queue_t *queue) {
assert(queue != NULL);
semaphore_wait(queue->dequeue_sem);
pthread_mutex_lock(&queue->lock);
void *ret = list_front(queue->list);
list_remove(queue->list, ret);
pthread_mutex_unlock(&queue->lock);
semaphore_post(queue->enqueue_sem);
return ret;
}
DECLARE_TEST( semaphore, threaded )
{
object_t thread[32];
int ith;
int failed_waits;
semaphore_test_t test;
semaphore_initialize( &test.read, 0 );
semaphore_initialize( &test.write, 0 );
test.loopcount = 128;
test.counter = 0;
for( ith = 0; ith < 32; ++ith )
{
thread[ith] = thread_create( semaphore_waiter, "semaphore_waiter", THREAD_PRIORITY_NORMAL, 0 );
thread_start( thread[ith], &test );
}
test_wait_for_threads_startup( thread, 32 );
failed_waits = 0;
for( ith = 0; ith < test.loopcount * 32; ++ith )
{
semaphore_post( &test.read );
thread_yield();
if( !semaphore_try_wait( &test.write, 200 ) )
{
failed_waits++;
EXPECT_TRUE( semaphore_wait( &test.write ) );
}
}
for( ith = 0; ith < 32; ++ith )
{
thread_terminate( thread[ith] );
thread_destroy( thread[ith] );
thread_yield();
}
test_wait_for_threads_exit( thread, 32 );
EXPECT_EQ( test.counter, test.loopcount * 32 );
EXPECT_EQ( failed_waits, 0 );
semaphore_destroy( &test.read );
semaphore_destroy( &test.write );
return 0;
}
static void* semaphore_waiter( object_t thread, void* arg )
{
semaphore_test_t* sem = arg;
int loop;
for( loop = 0; loop < sem->loopcount; ++loop )
{
thread_yield();
semaphore_wait( &sem->read );
++sem->counter;
semaphore_post( &sem->write );
}
return 0;
}
void alarm_cleanup(void) {
// If lazy_initialize never ran there is nothing to do
if (!alarms)
return;
callback_thread_active = false;
semaphore_post(alarm_expired);
thread_free(callback_thread);
callback_thread = NULL;
semaphore_free(alarm_expired);
alarm_expired = NULL;
timer_delete(&timer);
list_free(alarms);
alarms = NULL;
pthread_mutex_destroy(&monitor);
}
static unsigned long thread_func(void *param)
{
ThreadParams *thread_params = (ThreadParams*)param;
BucketGrid *bucket_grid = (BucketGrid*)thread_params->bucket_grid;
RenderParams *render_params = (RenderParams*)thread_params->render_params;
u32 bucket_id = __sync_fetch_and_add(bucket_grid->current_bucket, 1);
while(bucket_id < bucket_grid->num_buckets){
u32 bucket_index = hilbert_curve_transform_bucket_id(
bucket_grid->num_buckets_x,bucket_id);
bucket_grid->active_buckets[bucket_index] = 1;
path_trace(*render_params,*bucket_grid,bucket_index);
bucket_grid->active_buckets[bucket_index] = 0;
bucket_grid->done_buckets[bucket_index] = 1;
semaphore_post(bucket_grid->bucket_done);
bucket_id = __sync_fetch_and_add(bucket_grid->current_bucket, 1);
}
return 0;
}
/* Wake up all the potential handlers for this RPC target. Return number of
* handlers posted to. */
static int wake_up_handlers_for_target(const TFN_Ptr function, int box_id)
{
int num_posted = 0;
UvisorBoxIndex * index = (UvisorBoxIndex *) g_context_current_states[box_id].bss;
uvisor_pool_queue_t * fn_group_queue = &index->rpc_fn_group_queue->queue;
uvisor_rpc_fn_group_t * fn_group_array = index->rpc_fn_group_queue->fn_groups;
/* Wake up all known waiters for this function. Search for the function in
* all known function groups. We have to search through all function groups
* (not just those currently waiting for messages) because we want the RTOS
* to be able to pick the highest priority waiter to schedule to run. Some
* waiters will wake up and find they have nothing to do if a higher
* priority waiter already took care of handling the incoming RPC. */
uvisor_pool_slot_t slot;
slot = fn_group_queue->head;
while (slot < fn_group_queue->pool->num) {
/* Look for the function in this function group. */
uvisor_rpc_fn_group_t * fn_group = &fn_group_array[slot];
TFN_Ptr const * fn_ptr_array = fn_group->fn_ptr_array;
size_t i;
for (i = 0; i < fn_group->fn_count; i++) {
/* If function is found: */
if (fn_ptr_array[i] == function) {
/* Wake up the waiter. */
semaphore_post(&fn_group->semaphore);
++num_posted;
}
}
slot = fn_group_queue->pool->management_array[slot].queued.next;
}
return num_posted;
}
static void unlock(vbv_t* vbv)
{
printf("vbv unlock\n");
semaphore_post(vbv->mutex);
return;
}
void post()
{ semaphore_post(&m_sem); }
void post()
{ semaphore_post(mp_sem); }
static void drain_result_queue(void)
{
UvisorBoxIndex * callee_index = (UvisorBoxIndex *) *__uvisor_config.uvisor_box_context;
uvisor_pool_queue_t * callee_queue = &callee_index->rpc_incoming_message_queue->done_queue;
uvisor_rpc_message_t * callee_array = (uvisor_rpc_message_t *) callee_queue->pool->array;
int callee_box = g_active_box;
/* Verify that the callee queue is entirely in caller box BSS. We check the
* entire queue instead of just the message we are interested in, because
* we want to validate the queue before we attempt any operations on it,
* like dequeing. */
if (!is_valid_queue(callee_queue, callee_box))
{
/* The callee's done queue is not valid. This shouldn't happen in a
* non-malicious system. */
assert(false);
return;
}
/* For each message in the queue: */
do {
uvisor_pool_slot_t callee_slot;
/* Dequeue the first result message from the queue. */
callee_slot = uvisor_pool_queue_try_dequeue_first(callee_queue);
if (callee_slot >= callee_queue->pool->num) {
/* The queue is empty or busy. */
break;
}
uvisor_rpc_message_t * callee_msg = &callee_array[callee_slot];
/* Look up the origin message. This should have been remembered
* by uVisor when it did the initial delivery. */
uvisor_pool_slot_t caller_slot = uvisor_result_slot(callee_msg->match_cookie);
/* Based on the origin message, look up the box to return the result to
* (caller box). */
const int caller_box = callee_msg->other_box_id;
UvisorBoxIndex * caller_index = (UvisorBoxIndex *) g_context_current_states[caller_box].bss;
uvisor_pool_queue_t * caller_queue = &caller_index->rpc_outgoing_message_queue->queue;
uvisor_rpc_message_t * caller_array = (uvisor_rpc_message_t *) caller_queue->pool->array;
/* Verify that the caller queue is entirely in caller box BSS. We check the
* entire queue instead of just the message we are interested in, because
* we want to validate the queue before we attempt any operations on it. */
if (!is_valid_queue(caller_queue, caller_box))
{
/* The caller's outgoing queue is not valid. The caller queue is
* messed up. This shouldn't happen in a non-malicious system.
* Discard the result message (not retrying later), because the
* caller is malicious. */
assert(false);
continue;
}
uvisor_rpc_message_t * caller_msg = &caller_array[caller_slot];
/* Verify that the caller box is waiting for the callee box to complete
* the RPC in this slot. */
/* Other box ID must be same. */
if (caller_msg->other_box_id != callee_box) {
/* The caller isn't waiting for this box to complete it. This
* shouldn't happen in a non-malicious system. */
assert(false);
continue;
}
/* The caller must be waiting for a box to complete this slot. */
if (caller_msg->state != UVISOR_RPC_MESSAGE_STATE_SENT)
{
/* The caller isn't waiting for any box to complete it. This
* shouldn't happen in a non-malicious system. */
assert(false);
continue;
}
/* The match_cookie must be same. */
if (caller_msg->match_cookie != callee_msg->match_cookie) {
/* The match cookies didn't match. This shouldn't happen in a
* non-malicious system. */
assert(false);
continue;
}
/* Copy the result to the message in the caller box outgoing message
* queue. */
caller_msg->result = callee_msg->result;
callee_msg->state = UVISOR_RPC_MESSAGE_STATE_IDLE;
caller_msg->state = UVISOR_RPC_MESSAGE_STATE_DONE;
/* Now that we've copied the result, we can free the message from the
* callee queue. The callee (the one sending result messages) doesn't
* care about the message after they post it to their outgoing result
* queue. */
callee_slot = uvisor_pool_queue_try_free(callee_queue, callee_slot);
if (callee_slot >= callee_queue->pool->num) {
/* The queue is empty or busy. This should never happen. We were
* able to dequeue a result message, but weren't able to free the
* result message. It is bad to take down the entire system. It is
* also bad to never free slots in the outgoing result queue.
* However, if we could dequeue the slot we should have no trouble
* freeing the slot here. */
assert(false);
break;
}
/* Post to the result semaphore, ignoring errors. */
int status;
status = semaphore_post(&caller_msg->semaphore);
if (status) {
/* We couldn't post to the result semaphore. We shouldn't really
* bring down the entire system if one box messes up its own
* semaphore. In a non-malicious system, this should never happen.
* */
assert(false);
}
} while (1);
}
/*!
* @brief IO system initialization.
* When user wants to start up the codec system,
* this function call is needed, to open the codec device,
* map the register into user space,
* get the working buffer/code buffer/parameter buffer,
* download the firmware, and then set up the interrupt signal path.
*
* @param callback vpu interrupt callback.
*
* @return
* @li 0 System initialization success.
* @li -1 System initialization failure.
*/
int IOSystemInit(void *callback)
{
int ret;
/* Exit directly if already initialized */
if (vpu_fd > 0) {
vpu_active_num++;
return 0;
}
ret = get_system_rev();
if (ret == -1) {
err_msg("Error: Unable to obtain system rev information\n");
return -1;
}
vpu_fd = open("/dev/mxc_vpu", O_RDWR);
if (vpu_fd < 0) {
err_msg("Can't open /dev/mxc_vpu\n");
return -1;
}
vpu_semap = vpu_semaphore_open();
if (vpu_semap == NULL) {
err_msg("Error: Unable to open vpu shared memory file\n");
close(vpu_fd);
vpu_fd = -1;
return -1;
}
if (!semaphore_wait(vpu_semap, API_MUTEX)) {
err_msg("Error: Unable to get mutex\n");
close (vpu_fd);
vpu_fd = -1;
return -1;
}
vpu_reg_base = (unsigned long)mmap(NULL, BIT_REG_MARGIN,
PROT_READ | PROT_WRITE,
MAP_SHARED, vpu_fd, 0);
if ((void *)vpu_reg_base == MAP_FAILED) {
err_msg("Can't map register\n");
close(vpu_fd);
vpu_fd = -1;
semaphore_post(vpu_semap, API_MUTEX);
return -1;
}
vpu_active_num++;
IOClkGateSet(true);
bit_work_addr.size = TEMP_BUF_SIZE + PARA_BUF_SIZE +
CODE_BUF_SIZE + PARA_BUF2_SIZE;
if (_IOGetPhyMem(VPU_IOC_GET_WORK_ADDR, &bit_work_addr) < 0) {
err_msg("Get bitwork address failed!\n");
goto err;
}
if (IOGetVirtMem(&bit_work_addr) <= 0)
goto err;
UnlockVpu(vpu_semap);
return 0;
err:
err_msg("Error in IOSystemInit()");
UnlockVpu(vpu_semap);
IOSystemShutdown();
return -1;
}
static void unlock(fbm_t* fbm)
{
semaphore_post(fbm->mutex);
return;
}
/*!
* @brief IO system initialization.
* When user wants to start up the codec system,
* this function call is needed, to open the codec device,
* map the register into user space,
* get the working buffer/code buffer/parameter buffer,
* download the firmware, and then set up the interrupt signal path.
*
* @param callback vpu interrupt callback.
*
* @return
* @li 0 System initialization success.
* @li -1 System initialization failure.
*/
int IOSystemInit(void *callback)
{
int ret;
/* Exit directly if already initialized */
if (vpu_fd > 0) {
vpu_active_num++;
return 0;
}
ret = get_system_rev();
if (ret == -1) {
err_msg("Error: Unable to obtain system rev information\n");
return -1;
}
vpu_fd = open("/dev/mxc_vpu", O_RDWR);
if (vpu_fd < 0) {
err_msg("Can't open /dev/mxc_vpu: %s\n", strerror(errno));
return -1;
}
vpu_shared_mem = vpu_semaphore_open();
if (vpu_shared_mem == NULL) {
err_msg("Error: Unable to open vpu shared memory file\n");
close(vpu_fd);
vpu_fd = -1;
return -1;
}
if (!semaphore_wait(vpu_semap, API_MUTEX)) {
err_msg("Error: Unable to get mutex\n");
close (vpu_fd);
vpu_fd = -1;
return -1;
}
vpu_reg_base = (unsigned long)mmap(NULL, BIT_REG_MARGIN,
PROT_READ | PROT_WRITE,
MAP_SHARED, vpu_fd, 0);
if ((void *)vpu_reg_base == MAP_FAILED) {
err_msg("Can't map register\n");
close(vpu_fd);
vpu_fd = -1;
semaphore_post(vpu_semap, API_MUTEX);
return -1;
}
vpu_active_num++;
IOClkGateSet(true);
#ifdef BUILD_FOR_ANDROID
unsigned long va_addr;
/* Special handle the bit work buffer, which reserved in vpu driver probe */
bit_work_addr.size = TEMP_BUF_SIZE + PARA_BUF_SIZE +
CODE_BUF_SIZE + PARA_BUF2_SIZE;
if (_IOGetPhyMem(VPU_IOC_GET_WORK_ADDR, &bit_work_addr) < 0) {
err_msg("Get bitwork address failed!\n");
goto err;
}
va_addr = (unsigned long)mmap(NULL, bit_work_addr.size, PROT_READ | PROT_WRITE,
MAP_SHARED, vpu_fd, bit_work_addr.phy_addr);
if ((void *)va_addr == MAP_FAILED) {
bit_work_addr.virt_uaddr = 0;
goto err;
}
bit_work_addr.virt_uaddr = va_addr;
#else
bit_work_addr.size = TEMP_BUF_SIZE + PARA_BUF_SIZE +
CODE_BUF_SIZE + PARA_BUF2_SIZE;
if (_IOGetPhyMem(VPU_IOC_GET_WORK_ADDR, &bit_work_addr) < 0) {
err_msg("Get bitwork address failed!\n");
goto err;
}
if (IOGetVirtMem(&bit_work_addr) == -1)
goto err;
#endif
UnlockVpu(vpu_semap);
return 0;
err:
err_msg("Error in IOSystemInit()");
UnlockVpu(vpu_semap);
IOSystemShutdown();
return -1;
}
/*
* Ninja thread run this function
* To find pseudo code and design detail, please see REAMME.pdf
*/
void *ninja(void *threadid)
{
int ret;
int tid = (intptr_t)threadid;
double ttime;
double tstop;
while(1)
{
tstop = (double)clock()/CLOCKS_PER_SEC;
ttime= tstop-tstart;
ttime = ttime * 10;
// printf("Time = %f",ttime);
if(ttime > time_to_run)
{
pthread_exit(NULL);
}
printf("Ninja %d | Waiting \n",tid);
/* Wait the mutex_register */
if( 0 != (ret = semaphore_wait(&mutex_register)) ) {
fprintf(stderr, "Error: semaphore_wait() failed with %d in thread %d\n", ret, tid);
pthread_exit(NULL);
}
/* Wait the mutex_ninja_count */
if( 0 != (ret = semaphore_wait(&mutex_ninja_count)) ) {
fprintf(stderr, "Error: semaphore_wait() failed with %d in thread %d\n", ret, tid);
pthread_exit(NULL);
}
/* Add one pirate */
ninja_count++;
if(ninja_count ==1)
{
/* Wait department */
if( 0 != (ret = semaphore_wait(&mutex_department)) ) {
fprintf(stderr, "Error: semaphore_wait() failed with %d in thread %d\n", ret, tid);
pthread_exit(NULL);
}
}
/* Post mutex_ninja_count */
if( 0 != (ret = semaphore_post(&mutex_ninja_count)) ) {
fprintf(stderr, "Error: semaphore_post() failed with %d in thread %d\n", ret, tid);
pthread_exit(NULL);
}
/* Post mutex_register */
if( 0 != (ret = semaphore_post(&mutex_register)) ) {
fprintf(stderr, "Error: semaphore_post() failed with %d in thread %d\n", ret, tid);
pthread_exit(NULL);
}
/* Wait team */
if( 0 != (ret = semaphore_wait(&mutex_team)) ) {
fprintf(stderr, "Error: semaphore_wait() failed with %d in thread %d\n", ret, tid);
pthread_exit(NULL);
}
ninja_enter[tid]++;
printf("Ninja %d | Costume preparation\n",tid);
int random_num = random() % 5000;
usleep(random_num);
/* Post mutex_team */
if( 0 != (ret = semaphore_post(&mutex_team)) ) {
fprintf(stderr, "Error: semaphore_post() failed with %d in thread %d\n", ret, tid);
pthread_exit(NULL);
}
/* Wait mutex_ninja_count */
if( 0 != (ret = semaphore_wait(&mutex_ninja_count)) ) {
fprintf(stderr, "Error: semaphore_wait() failed with %d in thread %d\n", ret, tid);
pthread_exit(NULL);
}
ninja_left[tid]++;
ninja_count--;
printf("Ninja %d | Leaving \n",tid);
if(ninja_count == 0)
{
/* Post mutex_department */
if( 0 != (ret = semaphore_post(&mutex_department)) ) {
fprintf(stderr, "Error: semaphore_post() failed with %d in thread %d\n", ret, tid);
pthread_exit(NULL);
}
}
/* Post mutex_ninja_count */
if( 0 != (ret = semaphore_post(&mutex_ninja_count)) ) {
fprintf(stderr, "Error: semaphore_post() failed with %d in thread %d\n", ret, tid);
pthread_exit(NULL);
}
random_num = random() % 1000;
// printf("I sleep %d",random_num);
usleep(random_num);
}
}
// Callback function for wake alarms and our posix timer
static void timer_callback(UNUSED_ATTR void *ptr) {
semaphore_post(alarm_expired);
}
TEST(Semaphore, Link)
{
Semaphore s = SEMAPHORE_INIT;
semaphore_post(& s);
}
/**
*\brief 网络连接发送请求函数。
*\param fs 定义了套接子得相关属性。
*\param msg 定义了发送请求消息。
*\param mlen 定义了发送请求消息长度。
*\param recv_buf 定义了接收缓存。
*\param recv_len 定义了接收消息长度。
*\param timeout_usec 定义了接收消息超时时间。
*\retval E_OK 表示成功。
*/
e_int32 fsocket_request(fsocket_t *fs, e_uint8 *msg, e_uint32 mlen,
e_uint8 *recv_buf, e_uint32 recv_len, e_uint32 timeout_usec) {
e_int32 ret;
e_uint8 req_id;
e_uint8 s_id;
int req_iid = -1, s_iid = -1;
/* Timeval structs for handling timeouts */
e_uint32 beg_time, elapsed_time;
e_assert(fs&&fs->state, E_ERROR_INVALID_HANDLER);
// DMSG((STDOUT, "FAKE SOCKE [%s:%u] try request,current rq_id=%u...\r\n", fs->name, (unsigned int) fs->id,(unsigned int) fs->rq_id));
//请求发送锁
ret = semaphore_timeoutwait(&fs->send_sem, timeout_usec);
e_assert(ret, E_ERROR_LOCK_FAILED);
/* Acquire the elapsed time since epoch */
beg_time = GetTickCount();
//发送请求
ret = send_one_msg(fs, msg, mlen, timeout_usec);
if (e_failed(ret))
goto END;
//等待回复
elapsed_time = GetTickCount() - beg_time;
while (timeout_usec <= 0
|| (elapsed_time = GetTickCount() - beg_time) < timeout_usec) {
if (timeout_usec <= 0) //没有设置超时,死等
{
ret = wait_for_reply_forever(fs);
} else {
ret = wait_for_reply(fs, timeout_usec - elapsed_time);
}
if (!e_failed(ret)) {
//取出消息,和请求号
recv_len = recv_len >= MSG_MAX_LEN ? MSG_MAX_LEN : recv_len;
sscanf(fs->buf, "#%02X%02X%[^@]", &s_iid, &req_iid, recv_buf);
s_id = s_iid & 0xFF;
req_id = req_iid & 0xFF;
//TODO:无视过时消息?
if (req_id < fs->rq_id) {
DMSG((STDOUT, "FAKE SOCKE [%s:%u:%u] 取到过时消息:id=%u \n忽略,继续等待下一个消息\n", fs->name, (unsigned int) fs->id, (unsigned int) fs->rq_id, (unsigned int) req_id));
continue;
} else if (req_id > fs->rq_id) {
// DMSG((STDOUT,"出现消息号异常,请检查!\n"));
// while (1)
// ;
}
break;
}
break;
}
END:
//处理完成，提醒可以发下一个请求了
ret = semaphore_post(&fs->send_sem);
e_assert(ret, E_ERROR_TIME_OUT);
// DMSG(
// (STDOUT, "[%s_%u_%u]FAKE SOCKET release send sem...\r\n", fs->name, (unsigned int)fs->id,(unsigned int)fs->rq_id));
elapsed_time = GetTickCount() - beg_time;
if (MSG_LEVEL_VERBOSE)
DMSG((STDOUT, "FAKE SOCKET [%s:%u:%u] request done in %u Ms...\r\n", fs->name, (unsigned int) fs->id, req_id, (int) (elapsed_time
/ 1000)));
return E_OK;
}
