static mp_obj_t py_sensor_reset() {
sensor_reset();
sensor_set_pixformat(PIXFORMAT_RGB565);
sensor_set_framesize(FRAMESIZE_QQVGA);
sensor_set_framerate(FRAMERATE_30FPS);
sensor_set_gainceiling(GAINCEILING_8X);
sensor_set_contrast(0);
sensor_set_brightness(0);
return mp_const_none;
}
const mp_obj_module_t *py_sensor_init()
{
/* Init sensor */
if (sensor_init() != 0) {
return NULL;
}
/* Reset sensor and registers */
sensor_reset();
/* Use some default settings */
sensor_set_pixformat(PIXFORMAT_RGB565);
sensor_set_framesize(FRAMESIZE_QQVGA);
sensor_set_framerate(FRAMERATE_30FPS);
sensor_set_gainceiling(GAINCEILING_8X);
sensor_set_contrast(0);
sensor_set_brightness(0);
return &sensor_module;
}
void usbdbg_control(void *buffer, uint8_t request, uint32_t length)
{
cmd = (enum usbdbg_cmd) request;
switch (cmd) {
case USBDBG_FW_VERSION:
xfer_bytes = 0;
xfer_length = length;
break;
case USBDBG_FRAME_SIZE:
xfer_bytes = 0;
xfer_length = length;
break;
case USBDBG_FRAME_DUMP:
xfer_bytes = 0;
xfer_length = length;
break;
case USBDBG_ARCH_STR:
xfer_bytes = 0;
xfer_length = length;
break;
case USBDBG_SCRIPT_EXEC:
xfer_bytes = 0;
xfer_length = length;
vstr_reset(&script_buf);
break;
case USBDBG_SCRIPT_STOP:
if (script_running) {
// Set script running flag
script_running = false;
// Disable IDE IRQ (re-enabled by pyexec or main).
usbdbg_set_irq_enabled(false);
// interrupt running code by raising an exception
mp_obj_exception_clear_traceback(mp_const_ide_interrupt);
pendsv_nlr_jump(mp_const_ide_interrupt);
}
cmd = USBDBG_NONE;
break;
case USBDBG_SCRIPT_SAVE:
/* save running script */
// TODO
break;
case USBDBG_SCRIPT_RUNNING:
xfer_bytes = 0;
xfer_length =length;
break;
case USBDBG_TEMPLATE_SAVE:
case USBDBG_DESCRIPTOR_SAVE:
/* save template */
xfer_bytes = 0;
xfer_length =length;
break;
case USBDBG_ATTR_WRITE: {
/* write sensor attribute */
int16_t attr= *((int16_t*)buffer);
int16_t val = *((int16_t*)buffer+1);
switch (attr) {
case ATTR_CONTRAST:
sensor_set_contrast(val);
break;
case ATTR_BRIGHTNESS:
sensor_set_brightness(val);
break;
case ATTR_SATURATION:
sensor_set_saturation(val);
break;
case ATTR_GAINCEILING:
sensor_set_gainceiling(val);
break;
default:
break;
}
cmd = USBDBG_NONE;
break;
}
case USBDBG_SYS_RESET:
NVIC_SystemReset();
break;
case USBDBG_FB_ENABLE: {
int16_t enable = *((int16_t*)buffer);
JPEG_FB()->enabled = enable;
if (enable == 0) {
// When disabling framebuffer, the IDE might still be holding FB lock.
// If the IDE is not the current lock owner, this operation is ignored.
mutex_unlock(&JPEG_FB()->lock, MUTEX_TID_IDE);
}
cmd = USBDBG_NONE;
break;
}
case USBDBG_TX_BUF:
case USBDBG_TX_BUF_LEN:
xfer_bytes = 0;
xfer_length = length;
break;
default: /* error */
cmd = USBDBG_NONE;
break;
}
}
static mp_obj_t py_sensor_set_contrast(mp_obj_t contrast) {
if (sensor_set_contrast(mp_obj_get_int(contrast)) != 0) {
return mp_const_false;
}
return mp_const_true;
}
void usbdbg_data_out(void *buffer, int length)
{
switch (cmd) {
case USBDBG_SCRIPT_EXEC:
// check if GC is locked before allocating memory for vstr. If GC was locked
// at least once before the script is fully uploaded xfer_bytes will be less
// than the total length (xfer_length) and the script will Not be executed.
if (usbdbg_get_irq_enabled() && !gc_is_locked()) {
vstr_add_strn(&script_buf, buffer, length);
xfer_bytes += length;
if (xfer_bytes == xfer_length) {
// Set script ready flag
script_ready = 1;
// Disable IDE IRQ (re-enabled by pyexec or main).
usbdbg_set_irq_enabled(false);
// interrupt running script/REPL
mp_obj_exception_clear_traceback(mp_const_ide_interrupt);
pendsv_nlr_jump_hard(mp_const_ide_interrupt);
}
}
break;
case USBDBG_TEMPLATE_SAVE: {
image_t image ={
.w = fb->w,
.h = fb->h,
.bpp = fb->bpp,
.pixels = fb->pixels
};
// null terminate the path
length = (length == 64) ? 63:length;
((char*)buffer)[length] = 0;
rectangle_t *roi = (rectangle_t*)buffer;
char *path = (char*)buffer+sizeof(rectangle_t);
int res=imlib_save_image(&image, path, roi);
if (res != FR_OK) {
nlr_raise(mp_obj_new_exception_msg(&mp_type_OSError, ffs_strerror(res)));
}
// raise a flash IRQ to flush image
//NVIC->STIR = FLASH_IRQn;
break;
}
case USBDBG_DESCRIPTOR_SAVE: {
image_t image ={
.w = fb->w,
.h = fb->h,
.bpp = fb->bpp,
.pixels = fb->pixels
};
// null terminate the path
length = (length == 64) ? 63:length;
((char*)buffer)[length] = 0;
rectangle_t *roi = (rectangle_t*)buffer;
char *path = (char*)buffer+sizeof(rectangle_t);
py_image_descriptor_from_roi(&image, path, roi);
break;
}
default: /* error */
break;
}
}
void usbdbg_control(void *buffer, uint8_t request, uint32_t length)
{
cmd = (enum usbdbg_cmd) request;
switch (cmd) {
case USBDBG_FW_VERSION:
xfer_bytes = 0;
xfer_length = length;
break;
case USBDBG_FRAME_SIZE:
xfer_bytes = 0;
xfer_length = length;
break;
case USBDBG_FRAME_DUMP:
xfer_bytes = 0;
xfer_length = length;
break;
case USBDBG_FRAME_LOCK:
xfer_bytes = 0;
xfer_length = length;
break;
case USBDBG_FRAME_UPDATE:
sensor_snapshot(NULL);
cmd = USBDBG_NONE;
break;
case USBDBG_SCRIPT_EXEC:
xfer_bytes = 0;
xfer_length =length;
vstr_reset(&script_buf);
break;
case USBDBG_SCRIPT_STOP:
if (usbdbg_get_irq_enabled()) {
// Disable IDE IRQ (re-enabled by pyexec or main).
usbdbg_set_irq_enabled(false);
// interrupt running code by raising an exception
mp_obj_exception_clear_traceback(mp_const_ide_interrupt);
pendsv_nlr_jump_hard(mp_const_ide_interrupt);
}
cmd = USBDBG_NONE;
break;
case USBDBG_SCRIPT_SAVE:
/* save running script */
break;
case USBDBG_TEMPLATE_SAVE:
case USBDBG_DESCRIPTOR_SAVE:
/* save template */
xfer_bytes = 0;
xfer_length =length;
break;
case USBDBG_ATTR_WRITE: {
/* write sensor attribute */
int16_t attr= *((int16_t*)buffer);
int16_t val = *((int16_t*)buffer+1);
switch (attr) {
case ATTR_CONTRAST:
sensor_set_contrast(val);
break;
case ATTR_BRIGHTNESS:
sensor_set_brightness(val);
break;
case ATTR_SATURATION:
sensor_set_saturation(val);
break;
case ATTR_GAINCEILING:
sensor_set_gainceiling(val);
break;
default:
break;
}
cmd = USBDBG_NONE;
break;
}
case USBDBG_SYS_RESET:
NVIC_SystemReset();
break;
case USBDBG_BOOT:
*((uint32_t *)0x20002000) = 0xDEADBEEF;
NVIC_SystemReset();
break;
case USBDBG_TX_BUF:
case USBDBG_TX_BUF_LEN:
xfer_bytes = 0;
xfer_length = length;
break;
default: /* error */
cmd = USBDBG_NONE;
break;
}
}
ide_dbg_status_t ide_dbg_dispatch_cmd(machine_uart_obj_t* uart, uint8_t* data)
{
uint32_t length;
if(ide_dbg_cmd_len_count==0)
{
if( is_busy_sending ) // throw out data //TODO: maybe need queue data?
return IDE_DBG_DISPATCH_STATUS_BUSY;
length = xfer_length - xfer_bytes;
if(length)//receive data from IDE
{
ide_dbg_receive_data(uart, data);
++xfer_bytes;
return IDE_DBG_STATUS_OK;
}
if(*data == IDE_DBG_CMD_START_FLAG)
ide_dbg_cmd_len_count = 1;
}
else
{
ide_dbg_cmd_buf[ide_dbg_cmd_len_count++] = *data;
if(ide_dbg_cmd_len_count < 6)
return IDE_DBG_DISPATCH_STATUS_WAIT;
length = *( (uint32_t*)(ide_dbg_cmd_buf+2) );
cmd = ide_dbg_cmd_buf[1];
switch (cmd) {
case USBDBG_FW_VERSION:
xfer_bytes = 0;
xfer_length = length;
break;
case USBDBG_FRAME_SIZE:
xfer_bytes = 0;
xfer_length = length;
break;
case USBDBG_FRAME_DUMP:
xfer_bytes = 0;
xfer_length = length;
if(length)
is_sending_jpeg = true;
break;
case USBDBG_ARCH_STR:
xfer_bytes = 0;
xfer_length = length;
break;
case USBDBG_SCRIPT_EXEC:
xfer_bytes = 0;
xfer_length = length;
vstr_reset(&script_buf);
break;
case USBDBG_SCRIPT_STOP:
if (script_running) {
// Set script running flag
script_running = false;
// // Disable IDE IRQ (re-enabled by pyexec or main).
// usbdbg_set_irq_enabled(false);
// interrupt running code by raising an exception
mp_obj_exception_clear_traceback(mp_const_ide_interrupt);
// pendsv_nlr_jump_hard(mp_const_ide_interrupt);
MP_STATE_VM(mp_pending_exception) = mp_const_ide_interrupt; //MP_OBJ_FROM_PTR(&MP_STATE_VM(mp_kbd_exception));
#if MICROPY_ENABLE_SCHEDULER
if (MP_STATE_VM(sched_state) == MP_SCHED_IDLE) {
MP_STATE_VM(sched_state) = MP_SCHED_PENDING;
}
#endif
}
cmd = USBDBG_NONE;
break;
case USBDBG_FILE_SAVE:
xfer_bytes = 0;
xfer_length = length;
ide_file_save_status = 0;
if(length)
{
ide_file_save_status = 1;
ide_file_length = length;
if( p_data_temp )
{
free(p_data_temp);
}
p_data_temp = malloc( (length%4)? (length+4-(length%4)): length );
if(!p_data_temp)
{
xfer_length = 0;
ide_file_length = 0;
ide_file_save_status = 2;
}
}
break;
case USBDBG_FILE_SAVE_STATUS:
xfer_bytes = 0;
xfer_length = length;
break;
case USBDBG_SCRIPT_RUNNING:
xfer_bytes = 0;
xfer_length =length;
break;
case USBDBG_TEMPLATE_SAVE:
case USBDBG_DESCRIPTOR_SAVE:
/* save template */
xfer_bytes = 0;
xfer_length =length;
break;
case USBDBG_ATTR_WRITE: {
if(ide_dbg_cmd_len_count < 10)
return IDE_DBG_DISPATCH_STATUS_WAIT;
/* write sensor attribute */
int16_t attr = *( (int16_t*)(ide_dbg_cmd_buf+6) );
int16_t val = *( (int16_t*)(ide_dbg_cmd_buf+8) );
switch (attr) {
case ATTR_CONTRAST:
sensor_set_contrast(val);
break;
case ATTR_BRIGHTNESS:
sensor_set_brightness(val);
break;
case ATTR_SATURATION:
sensor_set_saturation(val);
break;
case ATTR_GAINCEILING:
sensor_set_gainceiling(val);
break;
default:
break;
}
cmd = USBDBG_NONE;
break;
}
case USBDBG_SYS_RESET:
sipeed_sys_reset();
break;
case USBDBG_FB_ENABLE:
{
if(ide_dbg_cmd_len_count < 8)
return IDE_DBG_DISPATCH_STATUS_WAIT;
int16_t enable = *( (int16_t*)(ide_dbg_cmd_buf+6) );
JPEG_FB()->enabled = enable;
if (enable == 0) {
// When disabling framebuffer, the IDE might still be holding FB lock.
// If the IDE is not the current lock owner, this operation is ignored.
mutex_unlock(&JPEG_FB()->lock, MUTEX_TID_IDE);
}
xfer_bytes = 0;
xfer_length = length;
cmd = USBDBG_NONE;
break;
}
case USBDBG_TX_BUF:
case USBDBG_TX_BUF_LEN:
xfer_bytes = 0;
xfer_length = length;
break;
default: /* error */
cmd = USBDBG_NONE;
break;
}
ide_dbg_cmd_len_count = 0; // all cmd data received ok
if(length && (cmd&0x80) ) // need send data to IDE
{
is_busy_sending = true;
ide_dbg_ack_data(uart); // ack data
}
}
}
