void MSOpenH264Encoder::setBitrate(int bitrate)
{
if (isInitialized()) {
// Encoding is already ongoing, do not change video size, only bitrate.
mVConf.required_bitrate = bitrate;
setConfiguration(mVConf);
} else {
MSVideoConfiguration best_vconf = ms_video_find_best_configuration_for_bitrate(mVConfList, bitrate, ms_get_cpu_count());
setConfiguration(best_vconf);
}
}
PertyDuplicatePoiOp::PertyDuplicatePoiOp()
{
_localRng.reset(new boost::minstd_rand(1));
_rng = _localRng.get();
setConfiguration(conf());
}
Type::Type(void)
{
obj_type=OBJ_TYPE;
setConfiguration(ENUMERATION_TYPE);
attributes[ParsersAttributes::BASE_TYPE]=QString();
attributes[ParsersAttributes::COMPOSITE_TYPE]=QString();
attributes[ParsersAttributes::RANGE_TYPE]=QString();
attributes[ParsersAttributes::TYPE_ATTRIBUTE]=QString();
attributes[ParsersAttributes::ENUM_TYPE]=QString();
attributes[ParsersAttributes::ENUMERATIONS]=QString();
attributes[ParsersAttributes::INPUT_FUNC]=QString();
attributes[ParsersAttributes::OUTPUT_FUNC]=QString();
attributes[ParsersAttributes::RECV_FUNC]=QString();
attributes[ParsersAttributes::SEND_FUNC]=QString();
attributes[ParsersAttributes::TPMOD_IN_FUNC]=QString();
attributes[ParsersAttributes::TPMOD_OUT_FUNC]=QString();
attributes[ParsersAttributes::ANALYZE_FUNC]=QString();
attributes[ParsersAttributes::INTERNAL_LENGTH]=QString();
attributes[ParsersAttributes::BY_VALUE]=QString();
attributes[ParsersAttributes::ALIGNMENT]=QString();
attributes[ParsersAttributes::STORAGE]=QString();
attributes[ParsersAttributes::DEFAULT_VALUE]=QString();
attributes[ParsersAttributes::ELEMENT]=QString();
attributes[ParsersAttributes::DELIMITER]=QString();
attributes[ParsersAttributes::REDUCED_FORM]=QString();
attributes[ParsersAttributes::CATEGORY]=QString();
attributes[ParsersAttributes::PREFERRED]=QString();
attributes[ParsersAttributes::LIKE_TYPE]=QString();
attributes[ParsersAttributes::COLLATABLE]=QString();
attributes[ParsersAttributes::SUBTYPE]=QString();
attributes[ParsersAttributes::SUBTYPE_DIFF_FUNC]=QString();
attributes[ParsersAttributes::CANONICAL_FUNC]=QString();
attributes[ParsersAttributes::OP_CLASS]=QString();
}
ConstrainedMatches::ConstrainedMatches(const ConstOsmMapPtr &map) :
_map(map)
{
_score = -1;
_timeLimit = -1;
setConfiguration(conf());
}
void CanIO::loadConfiguration()
{
CanIOConfiguration *config = (CanIOConfiguration *) getConfiguration();
if (!config) { // as lowest sub-class make sure we have a config object
config = new CanIOConfiguration();
setConfiguration(config);
}
Device::loadConfiguration(); // call parent
Logger::info(this, "CAN I/O configuration:");
#ifdef USE_HARD_CODED
if (false) {
#else
if (prefsHandler->checksumValid()) { //checksum is good, read in the values stored in EEPROM
#endif
// prefsHandler->read(EESYS_, &config->);
} else {
// config-> = 0;
saveConfiguration();
}
// Logger::info(getId(), "xyz: %d", config->);
}
void CanIO::saveConfiguration()
{
// prefsHandler->write(EESYS_, config->);
prefsHandler->saveChecksum();
}
PertyRemoveTagVisitor::PertyRemoveTagVisitor()
{
_localRng.reset(new boost::minstd_rand());
_rng = _localRng.get();
setConfiguration(conf());
}
bool Device::processSetupInRequest(SetupPacket * request, uint8_t * transferBuffer, uint16_t * transferBufferLength, uint16_t transferBufferMaxLength) {
// Device only handles standard requests.
if (request->requestType() != SetupPacket::RequestType::Standard) {
return false;
}
switch (request->bRequest()) {
case (int) Request::GetStatus:
return getStatus(transferBuffer, transferBufferLength, transferBufferMaxLength);
case (int) Request::SetAddress:
// Make sure the request is adress is valid.
assert(request->wValue() < 128);
/* According to the reference manual, the address should be set after the
* Status stage of the current transaction, but this is not true.
* It should be set here, after the Data stage. */
setAddress(request->wValue());
*transferBufferLength = 0;
return true;
case (int) Request::GetDescriptor:
return getDescriptor(request, transferBuffer, transferBufferLength, transferBufferMaxLength);
case (int) Request::SetConfiguration:
*transferBufferLength = 0;
return setConfiguration(request);
case (int) Request::GetConfiguration:
return getConfiguration(transferBuffer, transferBufferLength);
}
return false;
}
std::shared_ptr<Node> NodeStore::registerNode(const NodeType type, const std::string className, const std::string name,
const ont::entity entity, const ont::entity entityRelated, std::map<std::string, std::string> config,
const std::string source)
{
auto node = this->getNode(name, entity);
if (node)
{
_log->info("Node '%v' already registered for entity '%v' / '%v'", name, entity, entityRelated);
return node;
}
auto desc = std::make_shared<NodeDescription>(type, className, name, entity, entityRelated);
if (type == NodeType::SOURCE)
{
desc->setSource(source);
}
node = Node::createNode(className);
if (false == node)
{
_log->error("Node '%v' could not be created for entity '%v'. Register missing?", name,
entity);
return node;
}
node->setNodeDescription(desc);
node->setConfiguration(config);
return node;
}
/**
* Creates instances of BasicBehaviours, needed according to the PlanRepository, with the help of the given
* BehaviourCreator. If a BasicBehaviour cannot be instantiated, the Initialisation of the Pool is cancelled.
* @param bc A BehaviourCreator.
* @return True, if all necessary BasicBehaviours could be constructed. False, if the Initialisation was cancelled.
*/
bool BehaviourPool::init(IBehaviourCreator* bc)
{
if (_behaviourCreator != nullptr) {
delete _behaviourCreator;
}
_behaviourCreator = bc;
const PlanRepository::Accessor<BehaviourConfiguration>& behaviourConfs = _ae->getPlanRepository()->getBehaviourConfigurations();
for (const BehaviourConfiguration* beh : behaviourConfs) {
auto basicBeh = _behaviourCreator->createBehaviour(beh->getId());
if (basicBeh != nullptr) {
// set stuff from behaviour configuration in basic behaviour object
basicBeh->setConfiguration(beh);
basicBeh->setDelayedStart(beh->getDeferring());
basicBeh->setInterval(1000 / beh->getFrequency());
basicBeh->setEngine(_ae);
basicBeh->init();
_availableBehaviours.insert(make_pair(beh, basicBeh));
} else {
return false;
}
}
return true;
}
void MLX90621::initialise(int refrate) {
refreshRate = refrate;
Wire.begin(I2C_MASTER, 0, I2C_PINS_18_19, I2C_PULLUP_INT, I2C_RATE_100);
delay(5);
readEEPROM();
writeTrimmingValue();
setConfiguration();
}
void MSOpenH264Encoder::setSize(MSVideoSize size)
{
MSVideoConfiguration best_vconf = ms_video_find_best_configuration_for_size(mVConfList, size, ms_get_cpu_count());
mVConf.vsize = size;
mVConf.fps = best_vconf.fps;
mVConf.bitrate_limit = best_vconf.bitrate_limit;
setConfiguration(mVConf);
}
OgrWriter::OgrWriter():
_currElementCacheCapacity(_maxCacheElementsPerTypeDefault),
_elementCache(new ElementCacheLRU(_currElementCacheCapacity)),
_wgs84()
{
setConfiguration(conf());
_wgs84.SetWellKnownGeogCS("WGS84");
}
PertyWaySplitVisitor::PertyWaySplitVisitor() :
_splitRecursionLevel(0)
{
_localRng.reset(new boost::minstd_rand());
_rng = _localRng.get();
setConfiguration(conf());
}
AS3935::AS3935(PinName sda, PinName scl, PinName irqPin,int i2cFrequencyHz,uint8_t address):mI2c(sda,scl),mI2cAddr(address),mIrqPinInterrupt(irqPin)
{
queue =new Queue<uint8_t, 10>();
mI2c.frequency(i2cFrequencyHz);
if(!setConfiguration())
while(1); //TODO handle error
mIrqPinInterrupt.rise(this,&AS3935::handleIrqInterrupt);
}
void BrcmPatchRAM::uploadFirmware()
{
// signal to timer that firmware already loaded
mDevice.setProperty(kFirmwareLoaded, true);
// don't bother with devices that have no firmware
if (!getProperty(kFirmwareKey))
return;
if (!mDevice.open(this))
{
AlwaysLog("uploadFirmware could not open the device!\n");
return;
}
//REVIEW: this block to avoid merge conflicts (remove once merged)
////if (mDevice.open(this))
{
// Print out additional device information
printDeviceInfo();
// Set device configuration to composite configuration index 0
// Obtain first interface
if (setConfiguration(0) && findInterface(&mInterface) && mInterface.open(this))
{
DebugLog("set configuration and interface opened\n");
mInterface.findPipe(&mInterruptPipe, kUSBInterrupt, kUSBIn);
mInterface.findPipe(&mBulkPipe, kUSBBulk, kUSBOut);
if (mInterruptPipe.getValidatedPipe() && mBulkPipe.getValidatedPipe())
{
DebugLog("got pipes\n");
if (performUpgrade())
if (mDeviceState == kUpdateComplete)
AlwaysLog("[%04x:%04x]: Firmware upgrade completed successfully.\n", mVendorId, mProductId);
else
AlwaysLog("[%04x:%04x]: Firmware upgrade not needed.\n", mVendorId, mProductId);
else
AlwaysLog("[%04x:%04x]: Firmware upgrade failed.\n", mVendorId, mProductId);
OSSafeReleaseNULL(mReadBuffer); // mReadBuffer is allocated by performUpgrade but not released
}
mInterface.close(this);
}
// cleanup
if (mInterruptPipe.getValidatedPipe())
{
mInterruptPipe.abort();
mInterruptPipe.setPipe(NULL);
}
if (mBulkPipe.getValidatedPipe())
{
mBulkPipe.abort();
mBulkPipe.setPipe(NULL);
}
mInterface.setInterface(NULL);
mDevice.close(this);
}
}
OsmApiDbReader::OsmApiDbReader() :
_status(Status::Invalid),
_useDataSourceIds(true),
_open(false),
_osmElemId(-1),
_osmElemType(ElementType::Unknown)
{
setConfiguration(conf());
}
void WebSocketSinkManager::init()
{
//Protocol list for libwebsockets.
protocollist[0] = { "http-only", websocket_callback, 0 };
protocollist[1] = { NULL, NULL, 0 };
setConfiguration(configuration);
}
void WiFlyDevice::begin() {
/*
*/
DEBUG_LOG(1, "Entered WiFlyDevice::begin()");
uart.begin();
reboot(); // Reboot to get device into known state
requireFlowControl();
setConfiguration();
}
void WiFlyDevice::beginIP(const char *ip) {
/*
*/
DEBUG_LOG(1, "Entered WiFlyDevice::beginIP()");
if (!bDifferentUart) SPIuart.begin();
reboot(); // Reboot to get device into known state
//requireFlowControl();
setConfiguration(false, ip);
}
ServicesDbWriter::ServicesDbWriter()
{
_open = false;
_remapIds = true;
_nodesWritten = 0;
_waysWritten = 0;
_relationsWritten = 0;
setConfiguration(conf());
}
void WiFlyDevice::begin(boolean adhocMode) {
/*
*/
DEBUG_LOG(1, "Entered WiFlyDevice::begin()");
if (!bDifferentUart) SPIuart.begin();
reboot(); // Reboot to get device into known state
//requireFlowControl();
setConfiguration(adhocMode);
}
void DCDCController::loadConfiguration() {
DCDCConfiguration *config = (DCDCConfiguration *)getConfiguration();
if (!config) {
config = new DCDCConfiguration();
setConfiguration(config);
}
Device::loadConfiguration(); // call parent
}
void CodaMotorController::loadConfiguration() {
CodaMotorControllerConfiguration *config = (CodaMotorControllerConfiguration *)getConfiguration();
if (!config) {
config = new CodaMotorControllerConfiguration();
setConfiguration(config);
}
MotorController::loadConfiguration(); // call parent
}
/*
* Load configuration data from EEPROM.
*
* If not available or the checksum is invalid, default values are chosen.
*/
void BrusaMotorController::loadConfiguration() {
BrusaMotorControllerConfiguration *config = (BrusaMotorControllerConfiguration *)getConfiguration();
if(!config) { // as lowest sub-class make sure we have a config object
config = new BrusaMotorControllerConfiguration();
setConfiguration(config);
}
MotorController::loadConfiguration(); // call parent
#ifdef USE_HARD_CODED
if (false) {
#else
// if (prefsHandler->checksumValid()) { //checksum is good, read in the values stored in EEPROM
if (false) { //TODO: use eeprom, not fixed values
#endif
Logger::debug(BRUSA_DMC5, (char *)Constants::validChecksum);
// prefsHandler->read(EEMC_, &config->minimumLevel1);
} else { //checksum invalid. Reinitialize values and store to EEPROM
Logger::warn(BRUSA_DMC5, (char *)Constants::invalidChecksum);
config->maxMechanicalPowerMotor = 50000;
config->maxMechanicalPowerRegen = 0; //TODO: 50000; don't want regen yet !
config->dcVoltLimitMotor = 1000;
config->dcVoltLimitRegen = 0;//TODO: 1000; don't want regen yet !;
config->dcCurrentLimitMotor = 0;
config->dcCurrentLimitRegen = 0;
config->enableOscillationLimiter = false;
saveConfiguration();
}
Logger::debug(BRUSA_DMC5, "Max mech power motor: %d kW, max mech power regen: %d ", config->maxMechanicalPowerMotor, config->maxMechanicalPowerRegen);
Logger::debug(BRUSA_DMC5, "DC limit motor: %d Volt, DC limit regen: %d Volt", config->dcVoltLimitMotor, config->dcVoltLimitRegen);
Logger::debug(BRUSA_DMC5, "DC limit motor: %d Amps, DC limit regen: %d Amps", config->dcCurrentLimitMotor, config->dcCurrentLimitRegen);
}
/*
* Store the current configuration parameters to EEPROM.
*/
void BrusaMotorController::saveConfiguration() {
BrusaMotorControllerConfiguration *config = (BrusaMotorControllerConfiguration *)getConfiguration();
MotorController::saveConfiguration(); // call parent
//TODO: store to eeprom
// prefsHandler->write(EEMC_, config->maxMechanicalPowerMotor);
// prefsHandler->write(EEMC_, config->maxMechanicalPowerRegen);
// prefsHandler->write(EEMC_, config->dcVoltLimitMotor);
// prefsHandler->write(EEMC_, config->dcVoltLimitRegen);
// prefsHandler->write(EEMC_, config->dcCurrentLimitMotor);
// prefsHandler->write(EEMC_, config->dcCurrentLimitRegen);
// prefsHandler->write(EEMC_, config->enableOscillationLimiter);
prefsHandler->saveChecksum();
}
void MLX90621::measure() {
if (checkConfig()) {
readEEPROM();
writeTrimmingValue();
setConfiguration();
}
readPTAT();
readIR();
calculateTA();
readCPIX();
calculateTO();
}
Motor::Motor(USB::Context& usbContext,size_t index)
{
/* Get the index-th Kinect motor device from the context: */
USB::DeviceList deviceList(usbContext);
USB::Device::operator=(deviceList.getDevice(0x045e,0x02b0,index));
if(!isValid())
Misc::throwStdErr("Kinect::Motor::Motor: Less than %d Kinect motor devices detected",int(index));
/* Open and prepare the device: */
open();
setConfiguration(1);
claimInterface(0);
}
void WiFlyDevice::begin() {
/*
*/
DEBUG_LOG(1, "Entered WiFlyDevice::begin()");
while (!uart.begin()) {
Serial.println("uart init failed, retrying");
}
reboot(); // Reboot to get device into known state
requireFlowControl();
setConfiguration();
}
ChatWidget * TabsManager::addChat(Chat chat, OpenChatActivation activation)
{
kdebugf();
auto chatWidget = m_pluginInjectedFactory->makeInjected<ChatWidgetImpl>(chat, nullptr);
setConfiguration(chatWidget);
if (m_configuration->deprecatedApi()->readBoolEntry("Chat", "SaveOpenedWindows", true))
chatWidget->chat().addProperty("tabs:fix2626", true, CustomProperties::Storable);
auto tmpAttached = chat.property("tabs:tmp-attached", false).toBool();
auto tmpDetached = chat.property("tabs:tmp-detached", false).toBool();
auto attached = chat.property("tabs:attached", false).toBool();
auto detached = chat.property("tabs:detached", false).toBool();
if (!tmpAttached && tmpDetached)
{
DetachedChats.append(chat);
return chatWidget;
}
if (tmpAttached)
{
insertTab(chatWidget);
}
else if (!attached && detached)
{
DetachedChats.append(chat);
}
else if (attached || ConfigDefaultTabs)
insertTab(chatWidget);
if (TabDialog->count() == 1) // first tab
{
switch (activation)
{
case OpenChatActivation::Minimize:
TabDialog->showMinimized();
break;
default:
TabDialog->show();
break;
}
}
if (activation == OpenChatActivation::Activate)
_activateWindow(m_configuration, TabDialog);
return chatWidget;
}
void CppEditorDocument::setPreprocessorSettings(const CppTools::ProjectPart::Ptr &projectPart,
const QByteArray &defines)
{
const auto parser = processor()->parser();
QTC_ASSERT(parser, return);
if (parser->projectPart() != projectPart || parser->configuration().editorDefines != defines) {
CppTools::BaseEditorDocumentParser::Configuration config = parser->configuration();
config.manuallySetProjectPart = projectPart;
config.editorDefines = defines;
parser->setConfiguration(config);
emit preprocessorSettingsChanged(!defines.trimmed().isEmpty());
}
}
Network::Network(const RuntimeEnvironment *renv,uint64_t nwid,void *uptr) :
RR(renv),
_uPtr(uptr),
_id(nwid),
_mac(renv->identity.address(),nwid),
_enabled(true),
_portInitialized(false),
_lastConfigUpdate(0),
_destroyed(false),
_netconfFailure(NETCONF_FAILURE_NONE),
_portError(0)
{
char confn[128],mcdbn[128];
Utils::snprintf(confn,sizeof(confn),"networks.d/%.16llx.conf",_id);
Utils::snprintf(mcdbn,sizeof(mcdbn),"networks.d/%.16llx.mcerts",_id);
// These files are no longer used, so clean them.
RR->node->dataStoreDelete(mcdbn);
if (_id == ZT_TEST_NETWORK_ID) {
applyConfiguration(NetworkConfig::createTestNetworkConfig(RR->identity.address()));
// Save a one-byte CR to persist membership in the test network
RR->node->dataStorePut(confn,"\n",1,false);
} else {
bool gotConf = false;
try {
std::string conf(RR->node->dataStoreGet(confn));
if (conf.length()) {
setConfiguration(Dictionary(conf),false);
_lastConfigUpdate = 0; // we still want to re-request a new config from the network
gotConf = true;
}
} catch ( ... ) {} // ignore invalids, we'll re-request
if (!gotConf) {
// Save a one-byte CR to persist membership while we request a real netconf
RR->node->dataStorePut(confn,"\n",1,false);
}
}
if (!_portInitialized) {
ZT_VirtualNetworkConfig ctmp;
_externalConfig(&ctmp);
_portError = RR->node->configureVirtualNetworkPort(_id,&_uPtr,ZT_VIRTUAL_NETWORK_CONFIG_OPERATION_UP,&ctmp);
_portInitialized = true;
}
}
