Example #1
0
uint8_t tick() {
    if (state == 0) {
        state = 1;
        left_bar = 0;
        right_bar = 0;
        flash_light = 0;
        winner = 0;
        end = 0;
    }
    int8_t y;
    for(y = 0; y < LED_HEIGHT; y++) {
        setLedXY(0, y,
                 y <  left_bar / 7 ? 7 :
                 y == left_bar / 7 ? left_bar % 7 : 0);
        setLedXY(3, y,
                 y <  right_bar / 7 ? 7 :
                 y == right_bar / 7 ? right_bar % 7 : 0);
    }
    draw_flash(flash_light ? 7 : 1);
    if(rand()%100 < 50 - 20*flash_light) flash_light = !flash_light;
    if(winner == 1) draw_winner1();
    if(winner == 2) draw_winner2();
    if(winner > 0 && --end == 0) {
        state = 0;
        return 1;
    }
    return 0;
}
Example #2
0
static uint8_t tick(void) {
    for(int i = 0; i < N_RACERS; i++) {
        struct racer *r = racers + i;
        /* printf("racer %i: %ix%i MODE=%i\n", i, r->x, r->y, r->mode); */
        if (r->mode == MODE_DEAD) {
            /* Spawn a new */
            r->mode = MODE_ALIVE;
            r->x = rand() % LED_WIDTH;
            r->y = rand() % LED_HEIGHT;
            r->dir = rand() % 4;
            r->rgb[0] = 0x7f + (rand() & 0x7f);
            r->rgb[1] = 0x7f + (rand() & 0x7f);
            r->rgb[2] = 0x7f + (rand() & 0x7f);
            break;
        } else {
            if (r->mode == MODE_ALIVE)
                setLedXY(r->x, r->y, r->rgb[0], r->rgb[1], r->rgb[2]);
            else if (r->mode == MODE_ZOMBIE)
                /* setLedXY(r->x, r->y, 255 - r->rgb[0], 255 - r->rgb[1], 255 - r->rgb[2]); */
                setLedXY(r->x, r->y, 0, 0, 0);

            int should_turn = r->mode == MODE_ALIVE && (rand() & 0xF) == 0;
            if (!should_turn && try_go(r, r->dir)) {
                /* Went further in direction */
            } else {
                int new_dir;
                if (r->dir == DIR_UP || r->dir == DIR_DOWN) {
                    if ((rand() & 1) == 0)
                        new_dir = DIR_LEFT;
                    else
                        new_dir = DIR_RIGHT;
                } else {
                    if ((rand() & 1) == 0)
                        new_dir = DIR_UP;
                    else
                        new_dir = DIR_DOWN;
                }
                if (try_go(r, new_dir)) {
                    /* Ok */
                } else {
                    /* Give other direction a try */
                    new_dir = (new_dir + 2) % 4;
                    if (try_go(r, new_dir)) {
                        /* Ok */
                    } else {
                        /* Die */
                        r->mode = (r->mode + 1) % 3;
                        /* Reverse */
                        r->dir = (r->dir + 2) % 4;
                    }
                }
            }
        }
    }

    return 0;
}
Example #3
0
void pixeldraw(int x, int y, int color)
{
	uint8_t r[] = {0,145,255,0  ,255,0  ,255,0  ,127,0  ,127,127,0  ,0  ,0  ,255};
	uint8_t g[] = {0,0  ,0  ,0  ,0  ,255,255,255,255,255,127,255,127,127,0  ,255};
	uint8_t b[] = {0,145 ,0  ,255,255,0  ,0  ,255,127,127,255,0  ,127,0  ,127,255};

	x+=3;
	y+=3;

	setLedXY(x*3,y*3,r[color],g[color],b[color]);
	setLedXY(x*3+1,y*3+1,r[color],g[color],b[color]);
	setLedXY(x*3,y*3+1,r[color],g[color],b[color]);
	setLedXY(x*3+1,y*3,r[color],g[color],b[color]);
}
Example #4
0
uint8_t tick() {

	v1 += 3;
	v2 += 5;

	int rx = (cosi(v1 >> 2) >> 5) + 2;
	int ry = (sini(v2 >> 2) >> 5) + 2;

	int x, y;
	for(y = 0; y < LED_HEIGHT; y++) {
		for(x = 0; x < LED_WIDTH; x++) {

			int dx = x - rx;
			int dy = y - ry;
			int d = sqrti(dx * dx + dy * dy);

			int q = (	(sini(x * 8 + (v1)) +
						sini(y * 8 + (v2)) +
						sini(d << 5)) >> 2) + 128;

			int a = (q * 0xffff / 0x10000) >> 6;
			setLedXY(x, y, a);
		}
	}
	return 0;
	
}
Example #5
0
void draw_filledCircleSlice(
	unsigned int x, unsigned int y,
	double rad,
	uint8_t r,
	uint8_t g,
	uint8_t b,
	uint16_t slice_begin,
	uint16_t slice_end)
{

	uint8_t i,j;


	if(slice_begin > slice_end)
	{
		swap_(slice_begin,slice_end);
	}

	for(i=0;i<(rad*2);i++)
	{
		for(j=0;j<(rad*2);j++)
		{
	
			double dist = pythagoras( j,i );

			if(dist <= rad-1)
			{
				setLedXY(y-j,x+i,r,g,b);
			}else if(dist < rad)
			{
			//	dla_plot(y-j,x+i,r,g,b,1-(dist-rad+1));
			}
		}
	}
}
Example #6
0
uint8_t tick_random() {
	uint8_t x, y;

	for(x = 0; x < LED_WIDTH; x++) {
		for(y = 0; y < LED_HEIGHT; y++) {
			setLedXY(x, y, rand()&7);
		}
	}
	
	return 0;
}
Example #7
0
static uint8_t tick(void) {
    float time = getSysTick() / 10000.0f;
    char text[128];
    snprintf(text, 127, "Device Time: %.1fs", time);

    struct zint_symbol zs;
    memset(&zs, 0, sizeof(zs));
    zs.input_mode = DATA_MODE;
    zs.option_1 = 3;
    /* zs.option_2 = 2; */
    int qr_res = qr_code(&zs, (unsigned char *)text, strlen(text));
    if (qr_res) {
        /* printf("Error: %i\n", qr_res); */
    }

    int zoom = MAX(1, MIN(LED_WIDTH / (zs.width + (BORDER * 2)), LED_HEIGHT / (zs.rows + (BORDER * 2))));
    static int old_width = 0;
    if (old_width != zs.width) {
        old_width = zs.width;
        lcdFillRGB(255, 255, 255);
    }

    int x0 = (LED_WIDTH - zoom * zs.width) / 2;
    int y0 = (LED_HEIGHT - zoom * zs.rows) / 2;
    for(int y = 0; y < zs.width; y++) {
        for(int x = 0; x < zs.rows; x++) {
            for(int y1 = y * zoom; y1 < (y + 1) * zoom; y1++) {
                for(int x1 = x * zoom; x1 < (x + 1) * zoom; x1++) {
                    if (module_is_set(&zs, x, y)) {
                        setLedXY(x0 + x1, y0 + y1, 0, 0, 0);
                    } else {
                        setLedXY(x0 + x1, y0 + y1, 255, 255, 255);
                    }
                }
            }
        }
    }
        
    time++;
    return 0;
}
Example #8
0
static void dla_plot(int x, int y, uint8_t r,uint8_t g , uint8_t b, float br)
{
	uint8_t o_red = 0;
	uint8_t o_green = 0;
	uint8_t o_blue = 0;

	getLedXY(x,y,&o_red,&o_green,&o_blue);

	r=br*r+((1-br)*o_red);
	g=br*g+((1-br)*o_green);
	b=br*b+((1-br)*o_blue);
	setLedXY(x, y, r,g,b);


}
Example #9
0
static void pixeldraw(int x, int y, int color)
{
	uint8_t r[] = {0,105,255,0  ,255,0  ,255,0  ,127,0  ,127,127,0  ,0  ,0  ,255};
	uint8_t g[] = {0,0  ,0  ,0  ,0  ,255,255,255,255,255,127,255,127,127,0  ,255};
	uint8_t b[] = {0,105 ,0  ,255,255,0  ,0  ,255,127,127,255,0  ,127,0  ,127,255};

	y+=1;

	for(int i = 0;i<5;i++)
	{
		for(int j = 0;j<5;j++)
		{
			setLedXY(x*6+j,y*6+i,r[color],g[color],b[color]);
		}
	}
}
Example #10
0
void draw_filledCircle(
	unsigned int x, unsigned int y,
	double rad,
	uint8_t r,
	uint8_t g,
	uint8_t b )
{

	uint8_t i,j;

	for(i=0;i<rad;i++)
	{
		for(j=0;j<(i+1);j++)
		{
			double dist = pythagoras( j,i );
			if(dist <= rad-1)
			{
				setLedXY(y-j,x+i,r,g,b);
				setLedXY(y+j,x+i,r,g,b);
				setLedXY(y+j,x-i,r,g,b);
				setLedXY(y-j,x-i,r,g,b);

				setLedXY(y-i,x-j,r,g,b);
				setLedXY(y-i,x+j,r,g,b);
				setLedXY(y+i,x+j,r,g,b);
				setLedXY(y+i,x-j,r,g,b);

			}else if(dist < rad)
			{
				dla_plot(y-j,x+i,r,g,b,1-(dist-rad+1));
				dla_plot(y+j,x+i,r,g,b,1-(dist-rad+1));
				dla_plot(y+j,x-i,r,g,b,1-(dist-rad+1));
				dla_plot(y-j,x-i,r,g,b,1-(dist-rad+1));
				
				dla_plot(y-i,x+j,r,g,b,1-(dist-rad+1));
				dla_plot(y+i,x+j,r,g,b,1-(dist-rad+1));
				dla_plot(y+i,x-j,r,g,b,1-(dist-rad+1));
				dla_plot(y-i,x-j,r,g,b,1-(dist-rad+1));
			}
		}
	}



}
Example #11
0
static uint8_t tick() {

	static int8_t m = 0;
	static int8_t d = 1;

	int8_t x;
	// clear
	for(x = 0; x < LED_WIDTH * LED_HEIGHT; x++) setLedXY(x & 3, x >> 2, 0); // < looks nice, but does not work when LED_WIDTH/HEIGHT changes

	m += d;
	if(m < 1 || m == LED_HEIGHT - 1) d = -d;

	// draw row
	for(x = 0; x < LED_WIDTH; x++) setLedXY(x, m, 7);
	
	return 0;
}
Example #12
0
uint8_t tick_ball() {
	// bounce

	if(x == BOFF || x == LED_WIDTH - BOFF - 1) {
		dx *= -1;
	}

	if(y == BOFF || y == LED_HEIGHT - BOFF - 1) {
		dy *= -1;
	}

	// move

	x += dx;
	y += dy;

	// display

	const uint8_t ball[3][3] = {
		{0, 1, 0},
		{1, 1, 1},
		{0, 1, 0},
		};

	for(int8_t tx = -2; tx <= 2; ++tx) {
		for(int8_t ty = -2; ty <= 2; ++ty) {
			const int8_t ax = tx + x,
			      ay = ty + y;

			if(ax >= 0 && ay >= 0 && ax < LED_WIDTH && ay < LED_HEIGHT) {
				uint8_t bright = 0;

				if(abs(tx) <= 1 && abs(ty) <= 1) {
					bright = ball[tx+1][ty+1];
				}

				setLedXY(ax, ay, bright);
			}
		}
	}

	return 0;
}
Example #13
0
static uint8_t tick(void) {

	static int a = 0;

	a ^= 1;
	
		
	for(int y = 0; y < LED_HEIGHT; y++) 
	{
		for(int x = 0; x < LED_WIDTH; x++) 
		{
			setLedXY(
				x,y,a*0x0f
			);
		}
	}

	Delay(60);
	return 0;
}
Example #14
0
static uint8_t tick(void) {
    for(int y = 0, p = 0; y < LED_HEIGHT; y++) {
        for (int x = 0; x < LED_WIDTH; x++, p++) {
            /* Compute neighbor averages, with wrap-around. */
            int16_t sa = 0, sb = 0, sc = 0;
            for(int j = y -1 ; j < y + 2; j++) {
                for(int i = x - 1; i < x + 2; i++) {
                    int q =
                        (j < 0 ? j + LED_HEIGHT : j >= LED_HEIGHT ? j - LED_HEIGHT : j) * LED_WIDTH +
                        (i < 0 ? i + LED_WIDTH : i >= LED_WIDTH ? i - LED_WIDTH : i);
                    sa += bzr_a[q];
                    sb += bzr_b[q];
                    sc += bzr_c[q];
                }
            }
            /* This should be 9 but then it dies... */
            sa /= 9;
            sb /= 9;
            sc /= 9;

            int16_t ta = (sa * (259 + sb - sc)) >> 8;
            int16_t tb = (sb * (259 + sc - sa)) >> 8;
            int16_t tc = (sc * (259 + sa - sb)) >> 8;
            t_bzr_a[p] = MIN(255, ta);
            t_bzr_b[p] = MIN(255, tb);
            t_bzr_c[p] = MIN(255, tc);
            setLedXY(x, y, t_bzr_a[p], t_bzr_b[p], t_bzr_c[p]);
        }
    }    
    
	for(int y = 0, p = 0; y < LED_HEIGHT; y++) {
        for (int x = 0; x < LED_WIDTH; x++, p++) {
            bzr_a[p] = t_bzr_a[p];
            bzr_b[p] = t_bzr_b[p];
            bzr_c[p] = t_bzr_c[p];
        }
    }

    return 0;
}
Example #15
0
File: text.c Project: sebseb7/oled
void draw_char(int x,int y, char text, uint8_t r,uint8_t g, uint8_t b)
{
	text-=32;
	int i;
	for (i = 0; i < 6; i++)
	{
#ifdef __AVR__
		char ch = pgm_read_byte(&font8x6[(int)text][i]);
#else
		char ch =                font8x6[(int)text][i];
#endif

		int j;
		for (j = 0; j < 8; j++)
		{
			if(ch & (1<<j))
			{
				setLedXY(x+i,y+j+4,r,g,b);
			}
		}
	}
}
Example #16
0
void draw_flash(uint8_t b) {
    setLedXY(1, 3, b);
    setLedXY(1, 4, b);
    setLedXY(2, 3, b);
    setLedXY(2, 4, b);
}
Example #17
0
File: snake.c Project: 2bt/PentaJoy
uint8_t tick_snake() {
	int8_t x = buffer[pointer],
	       y = buffer[pointer + 1];

	// init?

	if(end < 0) {
		new_apple();
		end = 0;
	}

	// the end?

	if(end > 0) {
		for(int8_t i = length - 1; i >= 0; --i) {
			const int8_t cur = CYCLE(pointer - i * 2, ARRAY_SIZE(buffer));

			setLedXY(buffer[cur], buffer[cur + 1], (end % 3) * 2 + (i == 0) * 3);
		}

		++end;

		if(end > 9) {
			end = -1;
			length = 1;

			return 1;
		} else {
			return 0;
		}
	}

	// game step or animation?

	if(tick == 0) {
		// move

		switch(direction) {
			case 0:
				++x;
				break;
			case 1:
				++y;
				break;
			case 2:
				--x;
				break;
			case 3:
				--y;
				break;
		}

		x = CYCLE(x, LED_WIDTH);
		y = CYCLE(y, LED_HEIGHT);

		// save

		pointer = (pointer + 2) % ARRAY_SIZE(buffer);
		buffer[pointer] = x;
		buffer[pointer + 1] = y;

		// eaten?

		if(apple[0] == x && apple[1] == y) {
			++length;
			new_apple();
		}

		// collision

		if(collision(x, y, 1)) {
			end = 1;
		}

		// paint start of tail

		const int8_t last = CYCLE(pointer - 2, ARRAY_SIZE(buffer));
		setLedXY(buffer[last], buffer[last+1], 3);

		// clear tail

		const int8_t end = CYCLE(pointer - length * 2, ARRAY_SIZE(buffer));
		setLedXY(buffer[end], buffer[end + 1], 0);

		// paint apple

		setLedXY(apple[0], apple[1], MAX_TICK);

		// paint head

		setLedXY(x, y, 7);
	} else {
		// pulsing apple
		setLedXY(apple[0], apple[1], tick);
	}

	// tick on

	if(++tick >= MAX_TICK) {
		tick = 0;
	}

	return 0;
}
Example #18
0
void draw_winner1(void) {
    setLedXY(2, 1, 7);
    setLedXY(1, 2, 7);
    setLedXY(1, 0, 7);
}
Example #19
0
void draw_winner2(void) {
    setLedXY(1, 1, 7);
    setLedXY(2, 2, 7);
    setLedXY(2, 0, 7);
}