/* #16.1, #17.1, #20.1, #21.1, #22.1 (see t1510) */
static const char *setup_bare_git_dir(struct strbuf *cwd, int offset,
int *nongit_ok)
{
int root_len;
if (check_repository_format_gently(".", nongit_ok))
return NULL;
setenv(GIT_IMPLICIT_WORK_TREE_ENVIRONMENT, "0", 1);
/* --work-tree is set without --git-dir; use discovered one */
if (getenv(GIT_WORK_TREE_ENVIRONMENT) || git_work_tree_cfg) {
const char *gitdir;
gitdir = offset == cwd->len ? "." : xmemdupz(cwd->buf, offset);
if (chdir(cwd->buf))
die_errno("Could not come back to cwd");
return setup_explicit_git_dir(gitdir, cwd, nongit_ok);
}
inside_git_dir = 1;
inside_work_tree = 0;
if (offset != cwd->len) {
if (chdir(cwd->buf))
die_errno("Cannot come back to cwd");
root_len = offset_1st_component(cwd->buf);
strbuf_setlen(cwd, offset > root_len ? offset : root_len);
set_git_dir(cwd->buf);
}
else
set_git_dir(".");
return NULL;
}
static const char *setup_discovered_git_dir(const char *gitdir,
char *cwd, int offset, int len,
int *nongit_ok)
{
if (check_repository_format_gently(gitdir, nongit_ok))
return NULL;
/* --work-tree is set without --git-dir; use discovered one */
if (getenv(GIT_WORK_TREE_ENVIRONMENT) || git_work_tree_cfg) {
if (offset != len && !is_absolute_path(gitdir))
gitdir = xstrdup(real_path(gitdir));
if (chdir(cwd))
die_errno("Could not come back to cwd");
return setup_explicit_git_dir(gitdir, cwd, len, nongit_ok);
}
/* #16.2, #17.2, #20.2, #21.2, #24, #25, #28, #29 (see t1510) */
if (is_bare_repository_cfg > 0) {
set_git_dir(offset == len ? gitdir : real_path(gitdir));
if (chdir(cwd))
die_errno("Could not come back to cwd");
return NULL;
}
/* #0, #1, #5, #8, #9, #12, #13 */
set_git_work_tree(".");
if (strcmp(gitdir, DEFAULT_GIT_DIR_ENVIRONMENT))
set_git_dir(gitdir);
inside_git_dir = 0;
inside_work_tree = 1;
if (offset == len)
return NULL;
/* Make "offset" point to past the '/', and add a '/' at the end */
offset++;
cwd[len++] = '/';
cwd[len] = 0;
return cwd + offset;
}
/*
* We cannot decide in this function whether we are in the work tree or
* not, since the config can only be read _after_ this function was called.
*/
static const char *setup_git_directory_gently_1(int *nongit_ok)
{
const char *env_ceiling_dirs = getenv(CEILING_DIRECTORIES_ENVIRONMENT);
struct string_list ceiling_dirs = STRING_LIST_INIT_DUP;
static struct strbuf cwd = STRBUF_INIT;
const char *gitdirenv, *ret;
char *gitfile;
int offset, offset_parent, ceil_offset = -1;
dev_t current_device = 0;
int one_filesystem = 1;
/*
* We may have read an incomplete configuration before
* setting-up the git directory. If so, clear the cache so
* that the next queries to the configuration reload complete
* configuration (including the per-repo config file that we
* ignored previously).
*/
git_config_clear();
/*
* Let's assume that we are in a git repository.
* If it turns out later that we are somewhere else, the value will be
* updated accordingly.
*/
if (nongit_ok)
*nongit_ok = 0;
if (strbuf_getcwd(&cwd))
die_errno("Unable to read current working directory");
offset = cwd.len;
/*
* If GIT_DIR is set explicitly, we're not going
* to do any discovery, but we still do repository
* validation.
*/
gitdirenv = getenv(GIT_DIR_ENVIRONMENT);
if (gitdirenv)
return setup_explicit_git_dir(gitdirenv, &cwd, nongit_ok);
if (env_ceiling_dirs) {
int empty_entry_found = 0;
string_list_split(&ceiling_dirs, env_ceiling_dirs, PATH_SEP, -1);
filter_string_list(&ceiling_dirs, 0,
canonicalize_ceiling_entry, &empty_entry_found);
ceil_offset = longest_ancestor_length(cwd.buf, &ceiling_dirs);
string_list_clear(&ceiling_dirs, 0);
}
if (ceil_offset < 0 && has_dos_drive_prefix(cwd.buf))
ceil_offset = 1;
/*
* Test in the following order (relative to the cwd):
* - .git (file containing "gitdir: <path>")
* - .git/
* - ./ (bare)
* - ../.git
* - ../.git/
* - ../ (bare)
* - ../../.git/
* etc.
*/
one_filesystem = !git_env_bool("GIT_DISCOVERY_ACROSS_FILESYSTEM", 0);
if (one_filesystem)
current_device = get_device_or_die(".", NULL, 0);
for (;;) {
gitfile = (char*)read_gitfile(DEFAULT_GIT_DIR_ENVIRONMENT);
if (gitfile)
gitdirenv = gitfile = xstrdup(gitfile);
else {
if (is_git_directory(DEFAULT_GIT_DIR_ENVIRONMENT))
gitdirenv = DEFAULT_GIT_DIR_ENVIRONMENT;
}
if (gitdirenv) {
ret = setup_discovered_git_dir(gitdirenv,
&cwd, offset,
nongit_ok);
free(gitfile);
return ret;
}
free(gitfile);
if (is_git_directory("."))
return setup_bare_git_dir(&cwd, offset, nongit_ok);
offset_parent = offset;
while (--offset_parent > ceil_offset && cwd.buf[offset_parent] != '/');
if (offset_parent <= ceil_offset)
return setup_nongit(cwd.buf, nongit_ok);
if (one_filesystem) {
dev_t parent_device = get_device_or_die("..", cwd.buf,
offset);
if (parent_device != current_device) {
if (nongit_ok) {
if (chdir(cwd.buf))
die_errno("Cannot come back to cwd");
*nongit_ok = 1;
return NULL;
}
strbuf_setlen(&cwd, offset);
die("Not a git repository (or any parent up to mount point %s)\n"
"Stopping at filesystem boundary (GIT_DISCOVERY_ACROSS_FILESYSTEM not set).",
cwd.buf);
}
}
if (chdir("..")) {
strbuf_setlen(&cwd, offset);
die_errno("Cannot change to '%s/..'", cwd.buf);
}
offset = offset_parent;
}
}
/*
* We cannot decide in this function whether we are in the work tree or
* not, since the config can only be read _after_ this function was called.
*/
static const char *setup_git_directory_gently_1(int *nongit_ok)
{
const char *env_ceiling_dirs = getenv(CEILING_DIRECTORIES_ENVIRONMENT);
static char cwd[PATH_MAX+1];
const char *gitdirenv, *ret;
char *gitfile;
int len, offset, ceil_offset;
dev_t current_device = 0;
int one_filesystem = 1;
/*
* Let's assume that we are in a git repository.
* If it turns out later that we are somewhere else, the value will be
* updated accordingly.
*/
if (nongit_ok)
*nongit_ok = 0;
if (!getcwd(cwd, sizeof(cwd)-1))
die_errno("Unable to read current working directory");
offset = len = strlen(cwd);
/*
* If GIT_DIR is set explicitly, we're not going
* to do any discovery, but we still do repository
* validation.
*/
gitdirenv = getenv(GIT_DIR_ENVIRONMENT);
if (gitdirenv)
return setup_explicit_git_dir(gitdirenv, cwd, len, nongit_ok);
ceil_offset = longest_ancestor_length(cwd, env_ceiling_dirs);
if (ceil_offset < 0 && has_dos_drive_prefix(cwd))
ceil_offset = 1;
/*
* Test in the following order (relative to the cwd):
* - .git (file containing "gitdir: <path>")
* - .git/
* - ./ (bare)
* - ../.git
* - ../.git/
* - ../ (bare)
* - ../../.git/
* etc.
*/
one_filesystem = !git_env_bool("GIT_DISCOVERY_ACROSS_FILESYSTEM", 0);
if (one_filesystem)
current_device = get_device_or_die(".", NULL);
for (;;) {
gitfile = (char*)read_gitfile_gently(DEFAULT_GIT_DIR_ENVIRONMENT);
if (gitfile)
gitdirenv = gitfile = xstrdup(gitfile);
else {
if (is_git_directory(DEFAULT_GIT_DIR_ENVIRONMENT))
gitdirenv = DEFAULT_GIT_DIR_ENVIRONMENT;
}
if (gitdirenv) {
ret = setup_discovered_git_dir(gitdirenv,
cwd, offset, len,
nongit_ok);
free(gitfile);
return ret;
}
free(gitfile);
if (is_git_directory("."))
return setup_bare_git_dir(cwd, offset, len, nongit_ok);
while (--offset > ceil_offset && cwd[offset] != '/');
if (offset <= ceil_offset)
return setup_nongit(cwd, nongit_ok);
if (one_filesystem) {
dev_t parent_device = get_device_or_die("..", cwd);
if (parent_device != current_device) {
if (nongit_ok) {
if (chdir(cwd))
die_errno("Cannot come back to cwd");
*nongit_ok = 1;
return NULL;
}
cwd[offset] = '\0';
die("Not a git repository (or any parent up to mount parent %s)\n"
"Stopping at filesystem boundary (GIT_DISCOVERY_ACROSS_FILESYSTEM not set).", cwd);
}
}
if (chdir("..")) {
cwd[offset] = '\0';
die_errno("Cannot change to '%s/..'", cwd);
}
}
}
