// On this controller the back-light is controlled by the controllers internal PWM
// which is why it is in this file rather than the board file.
static inline void set_backlight(GDisplay* g, uint8_t percent) {
uint8_t temp;
//Work in progress: the RA8875 has a built-in PWM, its output can
//be used by a Dynamic Background Control or by a host (user)
// Enable PWM1
write_index(g, 0x8a); //MCLR
setreadmode(g);
temp = read_data(g);
setwritemode(g);
temp |= 1<<7 ;
write_data(g, temp);
// PWM1 function select
write_index(g, 0x8a); //MCLR
setreadmode(g);
temp = read_data(g);
setwritemode(g);
temp &= ~(1<<4);
write_data(g, temp);
// PWM1 Clock ratio
write_index(g, 0x8a); //MCLR
setreadmode(g);
temp = read_data(g);
setwritemode(g);
temp &= 0xf0;
temp |= 0x0b & 0x0f;
write_data(g, temp);
// PWM1 Write duty cycle
write_reg8(g, 0x8b, 54+percent); // PTNO: Also change percent to range from 0x00 to 0xFF
}
void EditorGarraFun::desenho_livre(const COORDENADA& x1, const COORDENADA& y1,
const COORDENADA& x2, const COORDENADA& y2,
MouseFun& mouse, const pacova& t,
MOUSE_EVENTO* evento)
{
BOLEANO pinta = FALSO;
COORDENADA antx, anty;
while (mouse.verifica(x1, y1, x2, y2))
{
{
COORDENADA ax, ay;
ax = mouse.x();
ay = mouse.y();
setcolor(7);
setlinestyle(1, 0, 0);
setwritemode(XOR_PUT);
line(ax, 0, ax, t.max_y);
line(0, ay, t.max_x, ay);
*evento = mouse.evento_pause();
line(ax, 0, ax, t.max_y);
line(0, ay, t.max_x, ay);
setwritemode(COPY_PUT);
setlinestyle(SOLID_LINE, 0, 0);
}
if (*evento == MOUSE_DOWN)
{
mouse.area(x1, y1, x2, y2);
pinta = VERDADEIRO;
antx = mouse.x();
anty = mouse.y();
}
else
if (*evento == MOUSE_UP)
{
mouse.area(0, 0, t.max_x, t.max_y);
pinta = FALSO;
}
if (pinta)
{
COORDENADA x = mouse.x(), y = mouse.y();
setcolor(15);
line(antx, anty, x, y);
antx = x;
anty = y;
}
}
}
/*
* Redeseneaza zona din dreapta dupa ce utilizatorul a miscat sau a
* modificat dreptunghiul in zona din stanga.
*/
void redraw_right_area()
{
int restidx, pi;
set(3);
setwritemode(COPY_PUT);
setcolor(LIGHTBLUE);
clearviewport();
for (int i = 0; i <= REF; i++)
{
if ((x[i] >= x1) && (x[i] <= x2) && (y[i] >= y1) && (y[i] <= y2))
{
moveto(newX(x[i]), newY(y[i]));
pi = i;
restidx = i+1;
i = REF+1;
}
}
for (i = restidx; i <= REF; i++)
{
if ((x[i] >= x1) && (x[i] <= x2) && (y[i] >= y1) && (y[i] <= y2))
{
if ((pi+1) == i)
{
lineto(newX(x[i]), newY(y[i]));
}
else
{
moveto(newX(x[i]), newY(y[i]));
}
pi = i;
}
}
}
void InitMouse(int& mouse_maxX, int& mouse_maxY)
// functions to initialize the mouse pointer
{//reseting the mouse ...
registers.r_ax = 0x00;
intr(0x33, ®isters);
// determining the minX maxX coordinates of the mouse ...
registers.r_ax = 0x07;
registers.r_cx = 0x00; // min X coordinate
registers.r_dx = mouse_maxX; // max X coordinate
intr(0x33, ®isters);
// determining the minY maxY coordinates of the mouse ...
registers.r_ax = 0x08;
registers.r_cx = 0x00; // min Y coordinate
registers.r_dx = mouse_maxY; // max Y coordinate
intr(0x33, ®isters);
// set the start coordinates ...
registers.r_ax = 0x04;
registers.r_cx = cursorx = mouse_maxX/2;
registers.r_dx = cursory = mouse_maxY/2;
intr(0x33, ®isters);
// drawing the first cursor ...
setwritemode(XOR_PUT);
BLine(cursorx, cursory - 2, cursorx, cursory - 10, C);
BLine(cursorx, cursory + 2, cursorx, cursory + 10, C);
BLine(cursorx - 2, cursory, cursorx - 10, cursory, C);
BLine(cursorx + 2, cursory, cursorx + 10, cursory, C);
// installing event handler ...
registers.r_ax = 0x0c;
registers.r_cx = 0x01;
registers.r_es = FP_SEG(mouse_event_handler);
registers.r_dx = FP_OFF(mouse_event_handler);
intr(0x33, ®isters);
}
/*
* Seteaza viewport-ul curent in functie de parametrul v la niste valori
* predefinite.
*/
void set(int v)
{
setcolor(MAGENTA);
switch (v)
{
case 0:
setviewport(0, 50, getmaxx(), getmaxy(), 1);
setwritemode(COPY_PUT);
rectangle(0, 0, getmaxx(), getmaxy()-50);
setviewport(1, 51, getmaxx()-1, getmaxy()-1, 1);
break;
case 1:
setviewport(10, 5, 100, 45, 1);
break;
case 2:
setviewport(110, 5, 200, 45, 1);
break;
case 3:
setviewport(210, 5, 300, 45, 1);
break;
case 4:
setviewport(310, 5, 500, 45, 1);
break;
case 5:
setviewport(490, 0, getmaxx(), 48, 1);
break;
}
setcolor(CYAN);
}
int main()
{
int buttons,x,y;
char str[100];
int driver=VGA;
int mode=VGAHI;
initgraph(&driver,&mode,"");
cleardevice();
rectangle(0,0,639,479);
setfillstyle(SOLID_FILL,BLUE);
bar(1,1,638,478);
outtextxy(3,15,"move mouse using any button.");
outtextxy(285,15,"quit");
setwritemode(XOR_PUT);
if(init(2, 638, 8, 477)==0 ) /*调用init 函数对鼠标器初始化*/
{printf("Mouse or Mouse Driver Absent,P1ease install!");
delay(5000);
closegraph();
exit(1);
}
x=320;y=240;
cursor(x,y); /*置十字光标在屏幕中心*/
for(;;)
{
newxy(&x,&y,&buttons);
if(x>=280&& x<=330 &&y>=12&&y<=33&& buttons)
{
cleardevice();
closegraph();
exit(0);
}
}
}
/*
* Desenarea graficului in zona din stanga a ecranului.
*/
void initialize_left_area()
{
set(2);
// desenarea graficului
setcolor(LIGHTBLUE);
moveto(x[0], y[0]);
for (int i = 1; i <= REF; i++)
lineto(x[i], y[i]);
setcolor(LIGHTGRAY);
// desenarea axelor daca sunt in figura
if ((minf <= 0) && (maxf >= 0))
{
// axa Ox
line(0, virtualY(f(zerof())), 316, virtualY(f(zerof())));
}
if ((a <= 0) && (b >= 0))
{
// axa Oy
line(virtualX(0), 0, virtualX(0), 316);
}
setwritemode(XOR_PUT);
setcolor(GREEN);
rectangle(x1, y1, x2, y2);
}
/*
* Deseneaza axele de coordonate.
*/
void draw_axes()
{
set(0);
setwritemode(XOR_PUT);
setcolor(WHITE);
line(x, 0, x, getmaxy());
line(0, y, getmaxx(), y);
}
/*
* Deseneaza toate segmentele.
*/
void draw_figure()
{
set(0);
setwritemode(XOR_PUT);
setcolor(CYAN);
for (int i = 0; i < DIM; i++)
{
line(round(x1[i]), round(y1[i]), round(x2[i]), round(y2[i]));
}
}
double energy()
{
int i = 0;
int flag=1,kk=0;
setcolor(WHITE);
setlinestyle(0,0,0);
setwritemode(COPY_PUT);
rectangle(maxx/2-LENTH/2-2,50,maxx/2+LENTH/2+2,60);
settextstyle(4,0,3);
setcolor(BLUE);
outtextxy(170,25,"MIN");
outtextxy(420,25,"MAX");
do
{
while(bioskey(1)!=0) getch();
if (0<=(i+flag)&&(i+flag)<=LENTH) i+=flag;
else flag=-flag;
setcolor(BLUE);
setwritemode(XOR_PUT);
line(maxx/2-LENTH/2+i,52,maxx/2-LENTH/2+i,58);
if (Music_on)
{
sound(15*i);
delay(400);
nosound();
}
else delay(600);
}while((kk=bioskey(1))!=ESC && kk!=SPACE);
setfillstyle(SOLID_FILL,BLACK);
floodfill(maxx/2-LENTH/2,52,WHITE);
if (bioskey(0)==ESC) return -1;
return 4.0*i/LENTH;
}
/*
* Deseneaza linia aleatoare
*/
void draw_line()
{
set(0);
setwritemode(XOR_PUT);
setcolor(BLUE);
if (simA < 0.09)
line(0, simY, 638, simY);
else if ((simA > 4.65) && (simA < 4.75))
line(simX, 0, simX, 428);
else
line(0, round(simY+((double) simX*tan(simA))),
638, round(simY-((double) (638-simX)*tan(simA))));
}
void Drawborder(int x,int y)
{
setwritemode(COPY_PUT);
setcolor(0);
line(x+60,y-20,x+180,y-20);// __
line(x+60,y+60,x+60,y-20);// |
line(x-40,y+60,x+60,y+60);// __
line(x-40,y+60,x-40,y+180);// |
setcolor(15);
line(x-40,y+180,x+60,y+180);// __
setcolor(0);
line(x+60,y+180,x+60,y+280);// |
setcolor(15);
line(x+180,y-20,x+180,y+60);// |
setcolor(0);
line(x+180,y+60,x+290,y+60);// __
setcolor(15);
line(x+290,y+60,x+290,y+180);// |
line(x+180,y+180,x+290,y+180);// __
line(x+180,y+180,x+180,y+280);// |
line(x+180,y+280,x+60,y+280);// __
setwritemode(XOR_PUT);
}
void HideMouse(void)
{ // hiding the mouse pointer by drawing again with XOR_PUT mode ...
setwritemode(XOR_PUT);
BLine(cursorx, cursory - 2, cursorx, cursory - 10, C);
BLine(cursorx, cursory + 2, cursorx, cursory + 10, C);
BLine(cursorx - 2, cursory, cursorx - 10, cursory, C);
BLine(cursorx + 2, cursory, cursorx + 10, cursory, C);
// disabling the mouse event handler ...
registers.r_ax = 0x0c;
registers.r_cx = 0x00;
registers.r_es = FP_SEG(mouse_event_handler);
registers.r_dx = FP_OFF(mouse_event_handler);
intr(0x33, ®isters);
}
void draw_mark() /****绘制球桌上的标记***/
{
setlinestyle(0,0,0);
setcolor(WHITE);
setwritemode(COPY_PUT);
line(137,121,137,459);
arc(137,290,90,270,53);
line(136,289,138,289);
line(319,290,321,290);
line(320,289,320,291);
}
static void DrawLine(int x0,int y0,int x1,int y1,int color)
{
int SaveColor;
struct viewporttype SaveViewPort;
MouseHidden();
getviewsettings(&SaveViewPort);
SaveColor=getcolor();
setviewport(ScreenX,ScreenY,ScreenX+mXw-1,ScreenY+mYw-1,1);
if (color<0) { setwritemode(XOR_PUT); color=-color; }
else setwritemode(COPY_PUT);
setcolor(color);
line(x0,y0,x1,y1);
setwritemode(COPY_PUT);
setcolor(SaveColor);
setviewport(SaveViewPort.left,SaveViewPort.top,SaveViewPort.right,
SaveViewPort.bottom,SaveViewPort.clip);
MouseShow();
}
void draw_frame( int x1, int y1, int x2, int y2 ) {
struct linesettingstype tmp;
getlinesettings( &tmp );
setlinestyle( SOLID_LINE, 0, THICK_WIDTH ); setwritemode( 0 );
y1 += 4;
#ifdef NOALIGN
x1 += 40; x2 += 40;
#else
x1 += align; x2 += align;
#endif
moveto( x1, y1 );
lineto( x2, y1 ); lineto( x2, y2 );
lineto( x1, y2 ); lineto( x1, y1 );
moveto( x1 + 1, y1 + 1 );
setlinestyle( tmp.linestyle, tmp.upattern, tmp.thickness );
}
main()
{
int drv= DETECT, mod_g;
if ((f= fopen("gr.in", "r")) == NULL)
{
printf("Eroare la deschiderea fisierului !");
getch();
return 0;
}
i= 0;
while (!feof(f))
{
i++;
fscanf(f, "%i %i %i %i\n", &x1[i], &y1[i], &x2[i], &y2[i]);
}
fclose(f);
initgraph(&drv, &mod_g, "c:\\bc31\\bgi");
setbkcolor(WHITE);
cleardevice();
setcolor(YELLOW);
setwritemode(XOR_PUT);
for (j= 1; j <= i; j++)
{
if (x1[j] != x2[j])
{
a1= (float(y2[j]-y1[j]))/(float(x2[j]-x1[j]));
a2= (float(x1[j])*float(y2[j])-float(y1[j])*float(x2[j]))/(x2[j]-x1[j]);
i1= -float(a2);
i2= (float(a1)*float(getmaxx()))-float(a2);
for (x= 0; x <= getmaxx(); x++)
{
j1= (float(a1)*float(x))-float(a2);
line(x, j1, x, 0);
}
}
else
for (x= 0; x <= getmaxy(); x++)
line(x1[j], x, getmaxx(), x);
}
getch();
return 0;
}
void draw_table() /********绘制球桌********/
{
setlinestyle(0,0,3);
setcolor(WHITE);
setwritemode(COPY_PUT);
rectangle(1,100,638,480);
draw_boundary();
draw_net();
setfillstyle(SOLID_FILL,TABLECOLOR);
floodfill(300,400,WHITE);
setfillstyle(SOLID_FILL,6);
floodfill(20,290,WHITE);
floodfill(620,290,WHITE);
draw_mark();
}
void mouse_event_handler(void) // used only to draw the mouse cursor
{
//in these registers are the coordinates of the Mouse pointer
register int mousex = _CX, mousey = _DX;
setwritemode(XOR_PUT);
//first we draw in the old cursor place
BLine(cursorx, cursory - 2, cursorx, cursory - 10, C);
BLine(cursorx, cursory + 2, cursorx, cursory + 10, C);
BLine(cursorx - 2, cursory, cursorx - 10, cursory, C);
BLine(cursorx + 2, cursory, cursorx + 10, cursory, C);
cursorx = mousex;
cursory = mousey;
//and now to the new cursor place
BLine(cursorx, cursory - 2, cursorx, cursory - 10, C);
BLine(cursorx, cursory + 2, cursorx, cursory + 10, C);
BLine(cursorx - 2, cursory, cursorx - 10, cursory, C);
BLine(cursorx + 2, cursory, cursorx + 10, cursory, C);
draw_uvxy();
}
void ShowMouse(void)
{
char fikt1, fikt2;
int mousex, mousey;
GetMouseButtons(&fikt1, &fikt2, &mousex, &mousey);
cursorx = mousex;
cursory = mousey;
// and now draw to the new cursor place ...
setwritemode(XOR_PUT);
BLine(cursorx, cursory - 2, cursorx, cursory - 10, C);
BLine(cursorx, cursory + 2, cursorx, cursory + 10, C);
BLine(cursorx - 2, cursory, cursorx - 10, cursory, C);
BLine(cursorx + 2, cursory, cursorx + 10, cursory, C);
// istalling again the mouse event handler ...
registers.r_ax = 0x0c;
registers.r_cx = 0x01;
registers.r_es = FP_SEG(mouse_event_handler);
registers.r_dx = FP_OFF(mouse_event_handler);
intr(0x33, ®isters);
}
void draw_stick(struct BALL ball,double w) /**********球杆*********/
{
setcolor(YELLOW);
setlinestyle(0,0,3);
setwritemode(XOR_PUT);
line(ball.posi.x+(BALL_R+5)*cos(w),ball.posi.y+(BALL_R+5)*sin(w),\
ball.posi.x+(BALL_R+40)*cos(w),ball.posi.y+(BALL_R+40)*sin(w));
setcolor(DARKGRAY);
setlinestyle(0,0,0);
moveto(ball.posi.x+(BALL_R+41)*cos(w-0.02),ball.posi.y+(BALL_R+41)*sin(w-0.02));
lineto(ball.posi.x+STICKLENTH*cos(w-0.01),ball.posi.y+STICKLENTH*sin(w-0.01));
setlinestyle(0,0,3);
lineto(ball.posi.x+STICKLENTH*cos(w+0.01),ball.posi.y+STICKLENTH*sin(w+0.01));
setlinestyle(0,0,0);
lineto(ball.posi.x+(BALL_R+41)*cos(w+0.02),ball.posi.y+(BALL_R+41)*sin(w+0.02));
}
void draw_boundary() /******绘制球桌边界*****/
{
int x_off,y_off;
setlinestyle(0,0,0);
setcolor(WHITE);
setwritemode(COPY_PUT);
line(22,149,22,433);
line(49,120,300,120);
line(339,121,588,121);
line(616,148,616,432);
line(50,459,299,459);
line(339,459,588,459);
x_off=20;y_off=13;
line(50,121,50-x_off,121-y_off);
line(588,121,588+x_off,121-y_off);
line(50,459,50-x_off,459+y_off);
line(588,459,588+x_off,459+y_off);
x_off=13;y_off=20;
line(23,148,23-x_off,148-y_off);
line(23,432,23-x_off,432+y_off);
line(616,148,616+x_off,148-y_off);
line(616,432,616+x_off,432+y_off);
x_off=4;y_off=11;
line(299,121,299+x_off,121-y_off);
line(339,121,339-x_off,121-y_off);
line(299,459,299+x_off,459+y_off);
line(339,459,339-x_off,459+y_off);
}
LLDSPEC void gdisp_lld_read_stop(GDisplay *g) {
setwritemode(g);
release_bus(g);
}
/*
* Deseneaza dreptunghiurile in care se introduc valorile.
*/
void variable_space(int direction)
{
setcolor(RED);
setwritemode(COPY_PUT);
switch (idx)
{
case 1:
setcolor(RED);
setwritemode(COPY_PUT);
if (direction == 1)
{
set(4);
setcolor(RED);
setwritemode(COPY_PUT);
rectangle(90+textwidth("р = "), 13,
135+textwidth("р = "), 15+textheight("1")+2);
}
else
{
set(1);
setcolor(RED);
setwritemode(COPY_PUT);
rectangle(10+textwidth("y = "), 28,
45+textwidth("y = "), 30+textheight("1")+2);
}
set(1);
setcolor(WHITE);
rectangle(10+textwidth("x = "), 13,
45+textwidth("x = "), 15+textheight("1")+2);
break;
case 2:
if (direction == 1)
{
set(1);
setcolor(RED);
setwritemode(COPY_PUT);
rectangle(10+textwidth("x = "), 13,
45+textwidth("x = "), 15+textheight("1")+2);
}
else
{
set(2);
setcolor(RED);
setwritemode(COPY_PUT);
rectangle(10+textwidth("x = "), 13,
55+textwidth("x = "), 15+textheight("1")+2);
}
set(1);
setcolor(WHITE);
rectangle(10+textwidth("y = "), 28,
45+textwidth("y = "), 30+textheight("1")+2);
break;
case 3:
if (direction == 1)
{
set(1);
setcolor(RED);
setwritemode(COPY_PUT);
rectangle(10+textwidth("y = "), 28,
45+textwidth("y = "), 30+textheight("1")+2);
}
else
{
set(2);
setcolor(RED);
setwritemode(COPY_PUT);
rectangle(10+textwidth("y = "), 28,
55+textwidth("y = "), 30+textheight("1")+2);
}
set(2);
setcolor(WHITE);
rectangle(10+textwidth("x = "), 13,
55+textwidth("x = "), 15+textheight("1")+2);
break;
case 4:
if (direction == 1)
{
set(2);
setcolor(RED);
setwritemode(COPY_PUT);
rectangle(10+textwidth("x = "), 13,
55+textwidth("x = "), 15+textheight("1")+2);
}
else
{
set(3);
setcolor(RED);
setwritemode(COPY_PUT);
rectangle(10+textwidth("р = "), 13,
55+textwidth("р = "), 15+textheight("1")+2);
}
set(2);
setcolor(WHITE);
rectangle(10+textwidth("y = "), 28,
55+textwidth("y = "), 30+textheight("1")+2);
break;
case 5:
if (direction == 1)
{
set(2);
setcolor(RED);
setwritemode(COPY_PUT);
rectangle(10+textwidth("y = "), 28,
55+textwidth("y = "), 30+textheight("1")+2);
}
else
{
set(4);
setcolor(RED);
setwritemode(COPY_PUT);
rectangle(10+textwidth("x = "), 13,
45+textwidth("x = "), 15+textheight("1")+2);
}
set(3);
setcolor(WHITE);
rectangle(10+textwidth("р = "), 13,
55+textwidth("р = "), 15+textheight("1")+2);
break;
case 6:
if (direction == 1)
{
set(3);
setcolor(RED);
setwritemode(COPY_PUT);
rectangle(10+textwidth("р = "), 13,
55+textwidth("р = "), 15+textheight("1")+2);
}
else
{
set(4);
setcolor(RED);
setwritemode(COPY_PUT);
rectangle(10+textwidth("y = "), 28,
45+textwidth("y = "), 30+textheight("1")+2);
}
set(4);
setcolor(WHITE);
rectangle(10+textwidth("x = "), 13,
45+textwidth("x = "), 15+textheight("1")+2);
break;
case 7:
if (direction == 1)
{
set(4);
setcolor(RED);
setwritemode(COPY_PUT);
rectangle(10+textwidth("x = "), 13,
45+textwidth("x = "), 15+textheight("1")+2);
}
else
{
set(4);
setcolor(RED);
setwritemode(COPY_PUT);
rectangle(90+textwidth("р = "), 13,
135+textwidth("р = "), 15+textheight("1")+2);
}
set(4);
setcolor(WHITE);
rectangle(10+textwidth("y = "), 28,
45+textwidth("y = "), 30+textheight("1")+2);
break;
case 8:
if (direction == 1)
{
set(4);
setcolor(RED);
setwritemode(COPY_PUT);
rectangle(10+textwidth("y = "), 28,
45+textwidth("y = "), 30+textheight("1")+2);
}
else
{
set(1);
setcolor(RED);
setwritemode(COPY_PUT);
rectangle(10+textwidth("x = "), 13,
45+textwidth("x = "), 15+textheight("1")+2);
}
set(4);
setcolor(WHITE);
rectangle(90+textwidth("р = "), 13,
135+textwidth("р = "), 15+textheight("1")+2);
break;
}
}
LLDSPEC bool_t gdisp_lld_init(GDisplay *g) {
uint16_t cver;
// No private area for this controller
g->priv = 0;
// Initialise the board interface
init_board(g);
/* Hardware reset */
setpin_reset(g, TRUE);
gfxSleepMicroseconds(1000);
setpin_reset(g, FALSE);
gfxSleepMicroseconds(1000);
acquire_bus(g);
write_index(g, 0); // Get controller version
setreadmode(g);
dummy_read(g);
cver = read_data(g);
setwritemode(g);
/* initializing funciton */
write_reg(g, 0xe5,0x8000); /* Set the internal vcore voltage */
write_reg(g, 0x00,0x0001); /* start OSC */
write_reg(g, 0x2b,0x0010); /* Set the frame rate as 80 when the internal resistor is used for oscillator circuit */
write_reg(g, 0x01,0x0100); /* s720 to s1 ; G1 to G320 */
write_reg(g, 0x02,0x0700); /* set the line inversion */
write_reg(g, 0x03,0x1018); /* 65536 colors */
write_reg(g, 0x04,0x0000);
write_reg(g, 0x08,0x0202); /* specify the line number of front and back porch periods respectively */
write_reg(g, 0x09,0x0000);
write_reg(g, 0x0a,0x0000);
write_reg(g, 0x0c,0x0000); /* select internal system clock */
write_reg(g, 0x0d,0x0000);
write_reg(g, 0x0f,0x0000);
write_reg(g, 0x50,0x0000); /* set windows adress */
write_reg(g, 0x51,0x00ef);
write_reg(g, 0x52,0x0000);
write_reg(g, 0x53,0x013f);
write_reg(g, 0x60,0x2700);
write_reg(g, 0x61,0x0001);
write_reg(g, 0x6a,0x0000);
write_reg(g, 0x80,0x0000);
write_reg(g, 0x81,0x0000);
write_reg(g, 0x82,0x0000);
write_reg(g, 0x83,0x0000);
write_reg(g, 0x84,0x0000);
write_reg(g, 0x85,0x0000);
write_reg(g, 0x90,0x0010);
write_reg(g, 0x92,0x0000);
write_reg(g, 0x93,0x0003);
write_reg(g, 0x95,0x0110);
write_reg(g, 0x97,0x0000);
write_reg(g, 0x98,0x0000);
/* power setting function */
write_reg(g, 0x10,0x0000);
write_reg(g, 0x11,0x0000);
write_reg(g, 0x12,0x0000);
write_reg(g, 0x13,0x0000);
gfxSleepMicroseconds(100);
write_reg(g, 0x10,0x17b0);
write_reg(g, 0x11,0x0004);
gfxSleepMicroseconds(50);
write_reg(g, 0x12,0x013e);
gfxSleepMicroseconds(50);
write_reg(g, 0x13,0x1f00);
write_reg(g, 0x29,0x000f);
gfxSleepMicroseconds(50);
write_reg(g, 0x20,0x0000);
write_reg(g, 0x21,0x0000);
/* initializing function */
write_reg(g, 0x30,0x0204);
write_reg(g, 0x31,0x0001);
write_reg(g, 0x32,0x0000);
write_reg(g, 0x35,0x0206);
write_reg(g, 0x36,0x0600);
write_reg(g, 0x37,0x0500);
write_reg(g, 0x38,0x0505);
write_reg(g, 0x39,0x0407);
write_reg(g, 0x3c,0x0500);
write_reg(g, 0x3d,0x0503);
/* display on */
write_reg(g, 0x07,0x0173);
gfxSleepMicroseconds(50);
// Finish Init
post_init_board(g);
// Release the bus
release_bus(g);
// Turn on the backlight
set_backlight(g, GDISP_INITIAL_BACKLIGHT);
/* Initialise the GDISP structure */
g->g.Width = GDISP_SCREEN_WIDTH;
g->g.Height = GDISP_SCREEN_HEIGHT;
g->g.Orientation = GDISP_ROTATE_0;
g->g.Powermode = powerOn;
g->g.Backlight = GDISP_INITIAL_BACKLIGHT;
g->g.Contrast = GDISP_INITIAL_CONTRAST;
return TRUE;
}
void PintaFun::desenha_circulo(const COORDENADA& x1, const COORDENADA& y1,
const COORDENADA& x2, const COORDENADA& y2,
MouseFun& mouse, MOUSE_EVENTO* evento)
{
BOLEANO pinta = FALSO;
COORDENADA antx, anty;
ConversorFun conv;
int raio;
while (mouse.verifica(x1, y1, x2, y2) || pinta)
{
{
COORDENADA ax = mouse.x(), ay = mouse.y();
if (pinta)
{
double r, a;
conv.converte(mouse.x(), mouse.y(), &a, &r, antx, anty);
raio = (int) r;
}
setcolor(7);
setlinestyle(1, 0, 0);
setwritemode(XOR_PUT);
line(ax, 0, ax, getmaxy());
line(0, ay, getmaxx(), ay);
if (pinta)
{
setcolor(10);
setlinestyle(0, 0, 0);
circulo(x1, y1, x2, y2, antx, anty, raio);
}
*evento = mouse.evento_pause();
if (pinta)
circulo(x1, y1, x2, y2, antx, anty, raio);
setcolor(7);
setlinestyle(1, 0, 0);
line(ax, 0, ax, getmaxy());
line(0, ay, getmaxx(), ay);
setwritemode(COPY_PUT);
setlinestyle(SOLID_LINE, 0, 0);
}
if (*evento == MOUSE_DOWN)
{
pinta = VERDADEIRO;
antx = mouse.x();
anty = mouse.y();
}
else
if (*evento == MOUSE_UP)
{
if (pinta)
{
/*
setcolor(15);
setviewport(x1, y1, x2, y2, 1);*/
//circle(antx - x1/*12*/, anty - y1/*26*/, raio);
//setviewport(0, 0, getmaxx(), getmaxy(), 0);
CirculoGrafico* cir = new CirculoGrafico(antx - this->x1() /* - 5*/,
anty - this->y1() /*- 20*/,
raio);
c_lista.ins(cir);
cir->exibe(this->x1(), this->y1(), this->x2(), this->y2());
pinta = FALSO;
}
}
else
if (*evento == MOUSE_UP_DIREITO)
return;
}
}
void PintaFun::desenha_linha(const COORDENADA& x1, const COORDENADA& y1,
const COORDENADA& x2, const COORDENADA& y2,
MouseFun& mouse, MOUSE_EVENTO* evento)
{
BOLEANO pinta = FALSO;
COORDENADA antx, anty;
while (mouse.verifica(x1, y1, x2, y2))
{
{
COORDENADA ax = mouse.x(), ay = mouse.y();
setcolor(7);
setlinestyle(1, 0, 0);
setwritemode(XOR_PUT);
line(ax, 0, ax, getmaxy());
line(0, ay, getmaxx(), ay);
if (pinta)
{
setcolor(12);
setlinestyle(1, 0, 0);
line(antx, anty, ax, ay);
}
*evento = mouse.evento_pause();
if (pinta)
line(antx, anty, ax, ay);
setcolor(7);
setlinestyle(1, 0, 0);
line(ax, 0, ax, getmaxy());
line(0, ay, getmaxx(), ay);
setwritemode(COPY_PUT);
setlinestyle(SOLID_LINE, 0, 0);
}
if (*evento == MOUSE_DOWN)
{
mouse.area(x1, y1, x2, y2);
pinta = VERDADEIRO;
antx = mouse.x();
anty = mouse.y();
}
else
if (*evento == MOUSE_UP)
{
if (pinta)
{
/*
setcolor(15);
line(antx, anty, mouse.x(), mouse.y());
*/
LinhaGrafico* linha = new LinhaGrafico(antx - this->x1(), anty - this->y1(),
mouse.x() - this->x1(), mouse.y() - this->y1());
c_lista.ins(linha);
linha->exibe(this->x1(), this->y1(),
this->x2(), this->y2());
mouse.area(0, 0, getmaxx(), getmaxy());
pinta = FALSO;
}
}
else
if (*evento == MOUSE_UP_DIREITO)
return;
}
}
void PintaFun::desenha_ponto(const COORDENADA& x1, const COORDENADA& y1,
const COORDENADA& x2, const COORDENADA& y2,
MouseFun& mouse, MOUSE_EVENTO* evento)
{
BOLEANO pinta = FALSO;
COORDENADA antx, anty;
if (*evento == MOUSE_DOWN)
pinta = VERDADEIRO;
else
if (*evento == MOUSE_UP)
{
if (pinta)
{
PontoGrafico* ponto = new PontoGrafico(mouse.x() - this->x1(), mouse.y() - this->y1());
c_lista.ins(ponto);
ponto->exibe(this->x1(), this->y1(),
this->x2(), this->y2());
//putpixel(mouse.x(), mouse.y(), 15);
pinta = FALSO;
}
}
else
if (*evento == MOUSE_UP_DIREITO)
return;
while (mouse.verifica(x1, y1, x2, y2))
{
{
COORDENADA ax, ay;
ax = mouse.x();
ay = mouse.y();
setcolor(7);
setlinestyle(1, 0, 0);
setwritemode(XOR_PUT);
line(ax, this->y1(), ax, this->y2());
line(this->x1(), ay, this->x2(), ay);
*evento = mouse.evento_pause();
line(ax, this->y1(), ax, this->y2());
line(this->x1(), ay, this->x2(), ay);
setwritemode(COPY_PUT);
setlinestyle(SOLID_LINE, 0, 0);
}
if (*evento == MOUSE_DOWN)
pinta = VERDADEIRO;
else
if (*evento == MOUSE_UP)
{
if (pinta)
{
PontoGrafico* ponto = new PontoGrafico(mouse.x() - this->x1(), mouse.y() - this->y1());
c_lista.ins(ponto);
ponto->exibe(this->x1(), this->y1(),
this->x2(), this->y2());
//putpixel(mouse.x(), mouse.y(), 15);
pinta = FALSO;
}
}
else
if (*evento == MOUSE_UP_DIREITO)
return;
}
}
/*
* Functia care deplaseaza, mareste sau micsoreaza dreptunghiul de
* selectie in functie de parametrul flag folosind macrourile
* MOVE_STEP si ZOOM_STEP. Parametrul flag are urmatoarea
* semnificatie:
* 0: misca sus;
* 1: misca jos;
* 2: misca stanga;
* 3: misca dreapta;
* 4: zoom in;
* 5: zoom out;
* alta valoare: nu se face nimic.
*/
void move_selector(int flag)
{
int oldx1 = x1;
int oldy1 = y1;
int oldx2 = x2;
int oldy2 = y2;
switch(flag)
{
// misca in sus
case 0:
if ((y1-MOVE_STEP) >= 0)
{
y1 = y1-MOVE_STEP;
y2 = y2-MOVE_STEP;
}
else
{
y2 = y2-y1;
y1 = 0;
}
break;
// misca in jos
case 1:
if ((y2+MOVE_STEP) <= 316)
{
y1 = y1+MOVE_STEP;
y2 = y2+MOVE_STEP;
}
else
{
y1 = y1+(316-y2);
y2 = 316;
}
break;
// misca in stanga
case 2:
if ((x1-MOVE_STEP) >= 0)
{
x1 = x1-MOVE_STEP;
x2 = x2-MOVE_STEP;
}
else
{
x2 = x2-x1;
x1 = 0;
}
break;
// misca in dreapta
case 3:
if ((x2+MOVE_STEP) <= 316)
{
x1 = x1+MOVE_STEP;
x2 = x2+MOVE_STEP;
}
else
{
x1 = x1+(316-x2);
x2 = 316;
}
break;
// zoom in
case 4:
if (((x2-x1-2*ZOOM_STEP) >= 50) && ((y2-y1-2*ZOOM_STEP) >= 50))
{
x1 = x1+ZOOM_STEP;
x2 = x2-ZOOM_STEP;
y1 = y1+ZOOM_STEP;
y2 = y2-ZOOM_STEP;
}
else
{
int maxzoom;
if ((x2-x1) > (y2-y1))
{
maxzoom = (int) (((y2-y1)-50)/2);
}
else
{
maxzoom = (int) (((x2-x1)-50)/2);
}
x1 = x1+maxzoom;
x2 = x2-maxzoom;
y1 = y1+maxzoom;
y2 = y2-maxzoom;
}
break;
// zoom out
case 5:
if ((x1-ZOOM_STEP) < 0)
{
x1 = 0;
}
else
{
x1 = x1-ZOOM_STEP;
}
if ((x2+ZOOM_STEP) > 316)
{
x2 = 316;
}
else
{
x2 = x2+ZOOM_STEP;
}
if ((y1-ZOOM_STEP) < 0)
{
y1 = 0;
}
else
{
y1 = y1-ZOOM_STEP;
}
if ((y2+ZOOM_STEP) > 316)
{
y2 = 316;
}
else
{
y2 = y2+ZOOM_STEP;
}
break;
}
set(2);
setwritemode(XOR_PUT);
setcolor(GREEN);
rectangle(oldx1, oldy1, oldx2, oldy2);
rectangle(x1, y1, x2, y2);
}
LLDSPEC bool_t gdisp_lld_init(GDisplay *g) {
unsigned short DeviceCode;
// No private area for this controller
g->priv = 0;
// Initialise the board interface
init_board(g);
/* Hardware reset */
setpin_reset(g, TRUE);
gfxSleepMilliseconds(1);
setpin_reset(g, FALSE);
gfxSleepMilliseconds(10);
setpin_reset(g, TRUE);
gfxSleepMilliseconds(50);
acquire_bus(g);
setreadmode(g);
DeviceCode = read_reg(g, 0x00);
setwritemode(g);
if( DeviceCode == 0x9320 || DeviceCode == 0x9300 )
{
write_reg(g, 0x00, 0x0000);
write_reg(g, 0x01, 0x0100); /* Driver Output Contral */
write_reg(g, 0x02, 0x0700); /* LCD Driver Waveform Contral */
write_reg(g, 0x03, 0x1038); /* Set the scan mode */
write_reg(g, 0x04, 0x0000); /* Scalling Contral */
write_reg(g, 0x08, 0x0202); /* Display Contral 2 */
write_reg(g, 0x09, 0x0000); /* Display Contral 3 */
write_reg(g, 0x0a, 0x0000); /* Frame Cycle Contal */
write_reg(g, 0x0c, (1<<0)); /* Extern Display Interface Contral 1 */
write_reg(g, 0x0d, 0x0000); /* Frame Maker Position */
write_reg(g, 0x0f, 0x0000); /* Extern Display Interface Contral 2 */
gfxSleepMilliseconds(50);
write_reg(g, 0x07, 0x0101); /* Display Contral */
gfxSleepMilliseconds(50);
write_reg(g, 0x10, (1<<12)|(0<<8)|(1<<7)|(1<<6)|(0<<4)); /* Power Control 1 */
write_reg(g, 0x11, 0x0007); /* Power Control 2 */
write_reg(g, 0x12, (1<<8)|(1<<4)|(0<<0)); /* Power Control 3 */
write_reg(g, 0x13, 0x0b00); /* Power Control 4 */
write_reg(g, 0x29, 0x0000); /* Power Control 7 */
write_reg(g, 0x2b, (1<<14)|(1<<4));
write_reg(g, 0x50, 0); /* Set X Start */
write_reg(g, 0x51, 239); /* Set X End */
write_reg(g, 0x52, 0); /* Set Y Start */
write_reg(g, 0x53, 319); /* Set Y End */
gfxSleepMilliseconds(50);
write_reg(g, 0x60, 0x2700); /* Driver Output Control */
write_reg(g, 0x61, 0x0001); /* Driver Output Control */
write_reg(g, 0x6a, 0x0000); /* Vertical Srcoll Control */
write_reg(g, 0x80, 0x0000); /* Display Position? Partial Display 1 */
write_reg(g, 0x81, 0x0000); /* RAM Address Start? Partial Display 1 */
write_reg(g, 0x82, 0x0000); /* RAM Address End-Partial Display 1 */
write_reg(g, 0x83, 0x0000); /* Displsy Position? Partial Display 2 */
write_reg(g, 0x84, 0x0000); /* RAM Address Start? Partial Display 2 */
write_reg(g, 0x85, 0x0000); /* RAM Address End? Partial Display 2 */
write_reg(g, 0x90, (0<<7)|(16<<0)); /* Frame Cycle Contral */
write_reg(g, 0x92, 0x0000); /* Panel Interface Contral 2 */
write_reg(g, 0x93, 0x0001); /* Panel Interface Contral 3 */
write_reg(g, 0x95, 0x0110); /* Frame Cycle Contral */
write_reg(g, 0x97, (0<<8));
write_reg(g, 0x98, 0x0000); /* Frame Cycle Contral */
write_reg(g, 0x07, 0x0133);
}
else if( DeviceCode == 0x9325 || DeviceCode == 0x9328)
{
write_reg(g, 0x00e7, 0x0010);
write_reg(g, 0x0000, 0x0001); /* start internal osc */
write_reg(g, 0x0001, 0x0100);
write_reg(g, 0x0002, 0x0700); /* power on sequence */
write_reg(g, 0x0003, (1<<12)|(1<<5)|(1<<4)|(0<<3) ); /* importance */
write_reg(g, 0x0004, 0x0000);
write_reg(g, 0x0008, 0x0207);
write_reg(g, 0x0009, 0x0000);
write_reg(g, 0x000a, 0x0000); /* display setting */
write_reg(g, 0x000c, 0x0001); /* display setting */
write_reg(g, 0x000d, 0x0000);
write_reg(g, 0x000f, 0x0000);
/* Power On sequence */
write_reg(g, 0x0010, 0x0000);
write_reg(g, 0x0011, 0x0007);
write_reg(g, 0x0012, 0x0000);
write_reg(g, 0x0013, 0x0000);
gfxSleepMilliseconds(50); /* delay 50 ms */
write_reg(g, 0x0010, 0x1590);
write_reg(g, 0x0011, 0x0227);
gfxSleepMilliseconds(50); /* delay 50 ms */
write_reg(g, 0x0012, 0x009c);
gfxSleepMilliseconds(50); /* delay 50 ms */
write_reg(g, 0x0013, 0x1900);
write_reg(g, 0x0029, 0x0023);
write_reg(g, 0x002b, 0x000e);
gfxSleepMilliseconds(50); /* delay 50 ms */
write_reg(g, 0x0020, 0x0000);
write_reg(g, 0x0021, 0x0000);
gfxSleepMilliseconds(50); /* delay 50 ms */
write_reg(g, 0x0030, 0x0007);
write_reg(g, 0x0031, 0x0707);
write_reg(g, 0x0032, 0x0006);
write_reg(g, 0x0035, 0x0704);
write_reg(g, 0x0036, 0x1f04);
write_reg(g, 0x0037, 0x0004);
write_reg(g, 0x0038, 0x0000);
write_reg(g, 0x0039, 0x0706);
write_reg(g, 0x003c, 0x0701);
write_reg(g, 0x003d, 0x000f);
gfxSleepMilliseconds(50); /* delay 50 ms */
write_reg(g, 0x0050, 0x0000);
write_reg(g, 0x0051, 0x00ef);
write_reg(g, 0x0052, 0x0000);
write_reg(g, 0x0053, 0x013f);
write_reg(g, 0x0060, 0xa700);
write_reg(g, 0x0061, 0x0001);
write_reg(g, 0x006a, 0x0000);
write_reg(g, 0x0080, 0x0000);
write_reg(g, 0x0081, 0x0000);
write_reg(g, 0x0082, 0x0000);
write_reg(g, 0x0083, 0x0000);
write_reg(g, 0x0084, 0x0000);
write_reg(g, 0x0085, 0x0000);
write_reg(g, 0x0090, 0x0010);
write_reg(g, 0x0092, 0x0000);
write_reg(g, 0x0093, 0x0003);
write_reg(g, 0x0095, 0x0110);
write_reg(g, 0x0097, 0x0000);
write_reg(g, 0x0098, 0x0000);
/* display on sequence */
write_reg(g, 0x0007, 0x0133);
write_reg(g, 0x0020, 0x0000);
write_reg(g, 0x0021, 0x0000);
}
gfxSleepMilliseconds(100); /* delay 50 ms */
// Finish Init
post_init_board(g);
// Release the bus
release_bus(g);
// Turn on the backlight
set_backlight(g, GDISP_INITIAL_BACKLIGHT);
/* Initialise the GDISP structure */
g->g.Width = GDISP_SCREEN_WIDTH;
g->g.Height = GDISP_SCREEN_HEIGHT;
g->g.Orientation = GDISP_ROTATE_0;
g->g.Powermode = powerOn;
g->g.Backlight = GDISP_INITIAL_BACKLIGHT;
g->g.Contrast = GDISP_INITIAL_CONTRAST;
return TRUE;
}
