void __init plat_mem_setup(void)
{
char *ctype;
char *cserial;
board_be_init = ip22_be_init;
/*
*/
sgihpc_init();
/* */
sgimc_init();
#ifdef CONFIG_BOARD_SCACHE
/* */
indy_sc_init();
#endif
/*
*/
set_io_port_base((unsigned long)ioremap(0x00080000,
0x1fffffff - 0x00080000));
/*
*/
ctype = ArcGetEnvironmentVariable("console");
cserial = ArcGetEnvironmentVariable("ConsoleOut");
if ((ctype && *ctype == 'd') || (cserial && *cserial == 's')) {
static char options[8] __initdata;
char *baud = ArcGetEnvironmentVariable("dbaud");
if (baud)
strcpy(options, baud);
add_preferred_console("ttyS", *(ctype + 1) == '2' ? 1 : 0,
baud ? options : NULL);
} else if (!ctype || *ctype != 'g') {
void __init plat_mem_setup(void)
{
char *ctype;
char *cserial;
board_be_init = ip22_be_init;
ip22_time_init();
/* Init the INDY HPC I/O controller. Need to call this before
* f*****g with the memory controller because it needs to know the
* boardID and whether this is a Guiness or a FullHouse machine.
*/
sgihpc_init();
/* Init INDY memory controller. */
sgimc_init();
#ifdef CONFIG_BOARD_SCACHE
/* Now enable boardcaches, if any. */
indy_sc_init();
#endif
/* Set EISA IO port base for Indigo2
* ioremap cannot fail */
set_io_port_base((unsigned long)ioremap(0x00080000,
0x1fffffff - 0x00080000));
/* ARCS console environment variable is set to "g?" for
* graphics console, it is set to "d" for the first serial
* line and "d2" for the second serial line.
*
* Need to check if the case is 'g' but no keyboard:
* (ConsoleIn/Out = serial)
*/
ctype = ArcGetEnvironmentVariable("console");
cserial = ArcGetEnvironmentVariable("ConsoleOut");
if ((ctype && *ctype == 'd') || (cserial && *cserial == 's')) {
static char options[8];
char *baud = ArcGetEnvironmentVariable("dbaud");
if (baud)
strcpy(options, baud);
add_preferred_console("ttyS", *(ctype + 1) == '2' ? 1 : 0,
baud ? options : NULL);
} else if (!ctype || *ctype != 'g') {
/* Use ARC if we don't want serial ('d') or graphics ('g'). */
prom_flags |= PROM_FLAG_USE_AS_CONSOLE;
add_preferred_console("arc", 0, NULL);
}
#if defined(CONFIG_VT) && defined(CONFIG_SGI_NEWPORT_CONSOLE)
{
ULONG *gfxinfo;
ULONG * (*__vec)(void) = (void *) (long)
*((_PULONG *)(long)((PROMBLOCK)->pvector + 0x20));
gfxinfo = __vec();
sgi_gfxaddr = ((gfxinfo[1] >= 0xa0000000
&& gfxinfo[1] <= 0xc0000000)
? gfxinfo[1] - 0xa0000000 : 0);
/* newport addresses? */
if (sgi_gfxaddr == 0x1f0f0000 || sgi_gfxaddr == 0x1f4f0000) {
conswitchp = &newport_con;
}
}
#endif
}
__initfunc(void sgi_setup(void))
{
#ifdef CONFIG_SERIAL_CONSOLE
char *ctype;
#endif
#ifdef CONFIG_REMOTE_DEBUG
char *kgdb_ttyd;
#endif
irq_setup = sgi_irq_setup;
/* Init the INDY HPC I/O controller. Need to call this before
* f*****g with the memory controller because it needs to know the
* boardID and whether this is a Guiness or a FullHouse machine.
*/
sgihpc_init();
/* Init INDY memory controller. */
sgimc_init();
/* Now enable boardcaches, if any. */
indy_sc_init();
#ifdef CONFIG_SERIAL_CONSOLE
/* ARCS console environment variable is set to "g?" for
* graphics console, it is set to "d" for the first serial
* line and "d2" for the second serial line.
*/
ctype = prom_getenv("console");
if(*ctype == 'd') {
if(*(ctype+1)=='2')
console_setup ("ttyS1", NULL);
else
console_setup ("ttyS0", NULL);
}
#endif
#ifdef CONFIG_REMOTE_DEBUG
kgdb_ttyd = prom_getcmdline();
if ((kgdb_ttyd = strstr(kgdb_ttyd, "kgdb=ttyd")) != NULL) {
int line;
kgdb_ttyd += strlen("kgdb=ttyd");
if (*kgdb_ttyd != '1' && *kgdb_ttyd != '2')
printk("KGDB: Uknown serial line /dev/ttyd%c, "
"falling back to /dev/ttyd1\n", *kgdb_ttyd);
line = *kgdb_ttyd == '2' ? 0 : 1;
printk("KGDB: Using serial line /dev/ttyd%d for session\n",
line ? 1 : 2);
rs_kgdb_hook(line);
prom_printf("KGDB: Using serial line /dev/ttyd%d for session, "
"please connect your debugger\n", line ? 1 : 2);
remote_debug = 1;
/* Breakpoints and stuff are in sgi_irq_setup() */
}
#endif
#ifdef CONFIG_SGI_PROM_CONSOLE
console_setup("ttyS0", NULL);
#endif
sgi_volume_set(simple_strtoul(prom_getenv("volume"), NULL, 10));
#ifdef CONFIG_VT
#ifdef CONFIG_SGI_NEWPORT_CONSOLE
conswitchp = &newport_con;
#else
conswitchp = &dummy_con;
#endif
#endif
rtc_ops = &indy_rtc_ops;
kbd_ops = &sgi_kbd_ops;
#ifdef CONFIG_PSMOUSE
aux_device_present = 0xaa;
#endif
#ifdef CONFIG_VIDEO_VINO
init_vino();
#endif
}
static int __init ip22_setup(void)
{
char *ctype;
#ifdef CONFIG_KGDB
char *kgdb_ttyd;
#endif
board_be_init = ip22_be_init;
ip22_time_init();
/* Init the INDY HPC I/O controller. Need to call this before
* f*****g with the memory controller because it needs to know the
* boardID and whether this is a Guiness or a FullHouse machine.
*/
sgihpc_init();
/* Init INDY memory controller. */
sgimc_init();
#ifdef CONFIG_BOARD_SCACHE
/* Now enable boardcaches, if any. */
indy_sc_init();
#endif
/* Set EISA IO port base for Indigo2 */
set_io_port_base(KSEG1ADDR(0x00080000));
/* ARCS console environment variable is set to "g?" for
* graphics console, it is set to "d" for the first serial
* line and "d2" for the second serial line.
*/
ctype = ArcGetEnvironmentVariable("console");
if (ctype && *ctype == 'd') {
static char options[8];
char *baud = ArcGetEnvironmentVariable("dbaud");
if (baud)
strcpy(options, baud);
add_preferred_console("ttyS", *(ctype + 1) == '2' ? 1 : 0,
baud ? options : NULL);
} else if (!ctype || *ctype != 'g') {
/* Use ARC if we don't want serial ('d') or Newport ('g'). */
prom_flags |= PROM_FLAG_USE_AS_CONSOLE;
add_preferred_console("arc", 0, NULL);
}
#ifdef CONFIG_KGDB
kgdb_ttyd = prom_getcmdline();
if ((kgdb_ttyd = strstr(kgdb_ttyd, "kgdb=ttyd")) != NULL) {
int line;
kgdb_ttyd += strlen("kgdb=ttyd");
if (*kgdb_ttyd != '1' && *kgdb_ttyd != '2')
printk(KERN_INFO "KGDB: Uknown serial line /dev/ttyd%c"
", falling back to /dev/ttyd1\n", *kgdb_ttyd);
line = *kgdb_ttyd == '2' ? 0 : 1;
printk(KERN_INFO "KGDB: Using serial line /dev/ttyd%d for "
"session\n", line ? 1 : 2);
rs_kgdb_hook(line);
printk(KERN_INFO "KGDB: Using serial line /dev/ttyd%d for "
"session, please connect your debugger\n", line ? 1:2);
remote_debug = 1;
/* Breakpoints and stuff are in sgi_irq_setup() */
}
#endif
#ifdef CONFIG_VT
#ifdef CONFIG_SGI_NEWPORT_CONSOLE
if (ctype && *ctype == 'g'){
ULONG *gfxinfo;
ULONG * (*__vec)(void) = (void *) (long)
*((_PULONG *)(long)((PROMBLOCK)->pvector + 0x20));
gfxinfo = __vec();
sgi_gfxaddr = ((gfxinfo[1] >= 0xa0000000
&& gfxinfo[1] <= 0xc0000000)
? gfxinfo[1] - 0xa0000000 : 0);
/* newport addresses? */
if (sgi_gfxaddr == 0x1f0f0000 || sgi_gfxaddr == 0x1f4f0000) {
conswitchp = &newport_con;
}
}
#endif
#endif
return 0;
}
