int do_one_xcvr(int skfd)
{
u16 *data = (u16 *)(&ifr.ifr_data);
u32 *data32 = (u32 *)(&ifr.ifr_data);
unsigned phy_id = data[0];
if (override_phy >= 0) {
printf("Using the specified MII PHY index %d.\n", override_phy);
phy_id = override_phy;
}
if (opt_g || opt_G || msg_level >= 0) {
if (ioctl(skfd, SIOCGPARAMS, &ifr) < 0) {
fprintf(stderr, "SIOCGPARAMS on %s failed: %s\n", ifr.ifr_name,
strerror(errno));
return -1;
}
}
if (opt_g) {
int i;
printf("Driver general parameter settings:");
for (i = 0; i*sizeof(u32) < sizeof(ifr.ifr_ifru); i++) {
printf(" %d", data32[i]);
}
printf(".\n");
}
if (opt_G) {
/* Set up to four arbitrary driver parameters from the -G parameter.
The format is comma separated integers, with a missing element
retaining the previous value.
*/
char *str = opt_G_string;
int i;
for (i = 0; str && i < 4; i++) {
char *endstr;
u32 newval = strtol(str, &endstr, 0);
if (debug)
printf(" parse string '%s' value %d end '%s'.\n",
str, newval, endstr);
if (str == endstr) {
if (endstr[0] == ',') /* No parameter */
str = endstr+1;
else {
fprintf(stderr, "Invalid driver parameter '%s'.\n", str);
str = index(str, ',');
}
} else if (endstr[0] == ',') {
data32[i] = newval;
str = endstr + 1;
} else if (endstr[0] == 0) {
data32[i] = newval;
break;
}
}
printf("Setting new driver general parameters:");
for (i = 0; i*sizeof(u32) < sizeof(ifr.ifr_ifru); i++) {
printf(" %d", data32[i]);
}
printf(".\n");
if (ioctl(skfd, SIOCSPARAMS, &ifr) < 0) {
fprintf(stderr, "SIOCSPARAMS on %s failed: %s\n", ifr.ifr_name,
strerror(errno));
return -1;
}
}
if (msg_level >= 0) {
data32[0] = msg_level;
if (ioctl(skfd, SIOCSPARAMS, &ifr) < 0) {
fprintf(stderr, "SIOCSPARAMS on %s failed: %s\n", ifr.ifr_name,
strerror(errno));
return -1;
}
}
if (opt_reset) {
printf("Resetting the transceiver...\n");
mdio_write(skfd, phy_id, 0, 0x8000);
}
/* Note: PHY addresses > 32 are pseudo-MII devices, usually built-in. */
if (phy_id < 64 && nway_advertise > 0) {
printf(" Setting the media capability advertisement register of "
"PHY #%d to 0x%4.4x.\n", phy_id, nway_advertise | 1);
mdio_write(skfd, phy_id, 4, nway_advertise | 1);
mdio_write(skfd, phy_id, 0, 0x1000);
}
if (opt_restart) {
printf("Restarting negotiation...\n");
mdio_write(skfd, phy_id, 0, 0x0000);
mdio_write(skfd, phy_id, 0, 0x1200);
}
/* To force 100baseTx-HD do mdio_write(skfd, phy_id, 0, 0x2000); */
if (fixed_speed >= 0) {
int reg0_val = 0;
if (fixed_speed & 0x0180) /* 100mpbs */
reg0_val |= 0x2000;
if ((fixed_speed & 0x0140) && /* A full duplex type and */
! (fixed_speed & 0x0820)) /* no half duplex types. */
reg0_val |= 0x0100;
printf("Setting the speed to \"fixed\", Control register %4.4x.\n",
reg0_val);
mdio_write(skfd, phy_id, 0, reg0_val);
}
if (set_BMCR >= 0) {
printf("Setting the Basic Mode Control Register to 0x%4.4x.\n",
set_BMCR);
mdio_write(skfd, phy_id, 0, set_BMCR);
}
if (opt_watch && opt_status)
monitor_status(skfd, phy_id);
show_basic_mii(skfd, phy_id);
#ifdef LIBMII
if (verbose)
show_mii_details(skfd, phy_id);
#else
if (verbose || debug) {
int mii_reg, mii_val;
printf(" MII PHY #%d transceiver registers:", phy_id);
for (mii_reg = 0; mii_reg < 32; mii_reg++) {
mii_val = mdio_read(skfd, phy_id, mii_reg);
printf("%s %4.4x", (mii_reg % 8) == 0 ? "\n " : "",
mii_val);
}
printf("\n");
}
#endif
if (opt_watch)
monitor_mii(skfd, phy_id);
if (opt_status &&
(mdio_read(skfd, phy_id, 1) & 0x0004) == 0)
exit(2);
return 0;
}
int
do_one_xcvr(int skfd)
{
u16 *data = (u16 *)(&ifr.ifr_data);
unsigned phy_id = data[0];
if (override_phy >= 0)
{
printf("Using the specified MII PHY index %d.\n", override_phy);
phy_id = override_phy;
}
if (opt_G)
{
/* Set an undefined general-purpose value.
Modify this code section to do special hacks such as
mdio_write(skfd, phy_id, 19, opt_G_value);
*/
#if 0 // hkim
u32 *data = (u32 *)(&ifr.ifr_data);
data[0] = opt_G_value;
if (ioctl(skfd, SIOCSPARAMS, &ifr) < 0)
{
fprintf(stderr, "SIOCSPARAMS on %s failed: %s\n", ifr.ifr_name, strerror(errno));
return -1;
}
#else
fprintf(stderr, "SIOCSPARAMS not supported\n");
return -1;
#endif
}
if (opt_reset)
{
printf("Resetting the transceiver...\n");
mdio_write(skfd, phy_id, 0, 0x8000);
}
/* Note: PHY addresses > 32 are pseudo-MII devices, usually built-in. */
if (phy_id < 64 && nway_advertise >= 0)
{
printf(" Setting the media capability advertisement register of "
"PHY #%d to 0x%4.4x.\n", phy_id, nway_advertise | 1);
mdio_write(skfd, phy_id, 4, nway_advertise | 1);
mdio_write(skfd, phy_id, 0, 0x1000);
}
if (opt_restart)
{
printf("Restarting negotiation...\n");
mdio_write(skfd, phy_id, 0, 0x0000);
mdio_write(skfd, phy_id, 0, 0x1200);
}
/* To force 100baseTx-HD do mdio_write(skfd, phy_id, 0, 0x2000); */
if (fixed_speed >= 0)
{
int reg0_val = 0;
if (fixed_speed & 0x0180) /* 100mpbs */
reg0_val |= 0x2000;
if (fixed_speed & 0x0140) /* Full duplex */
reg0_val |= 0x0100;
printf("Setting the speed to \"fixed\", Control register %4.4x.\n", reg0_val);
mdio_write(skfd, phy_id, 0, reg0_val);
}
show_basic_mii(skfd, phy_id);
#ifdef LIBMII
if(verbose)
show_mii_details(skfd, phy_id);
#else
if (verbose || debug)
{
int mii_reg, mii_val;
printf(" MII PHY #%d transceiver registers:", phy_id);
for (mii_reg = 0; mii_reg < 32; mii_reg++)
{
mii_val = mdio_read(skfd, phy_id, mii_reg);
printf("%s %4.4x", (mii_reg % 8) == 0 ? "\n " : "", mii_val);
}
printf("\n");
}
#endif
if (opt_watch)
monitor_mii(skfd, phy_id);
if (opt_status && (mdio_read(skfd, phy_id, 1) & 0x0004) == 0)
exit(2);
return 0;
}