/**
* @brief Application task handler
*/
static void app_task(void)
{
uint8_t number_of_bytes_to_be_transmitted;
uint8_t stop_data;
if(Wireshark_Settings == INIT_STATE)
{
uint8_t input_channel = sio_getchar();
sniffer_config_select(CHANNEL_SELECT_ID,input_channel);
Wireshark_Settings = SET_START;
}
if(Wireshark_Settings == SET_START)
{
number_of_bytes_to_be_transmitted = sio_getchar();
if(number_of_bytes_to_be_transmitted == 0x01)
{
sniffer_config_select(START_CAPTURE_ID,number_of_bytes_to_be_transmitted);
Wireshark_Settings = WS_RESTART;
sio_rx_data[0] = INIT_VALUE;
}
}
if(Wireshark_Settings == WS_RESTART)
{
number_of_bytes_to_be_transmitted = pal_sio_rx(SIO_CHANNEL, sio_rx_data, 1);
if((number_of_bytes_to_be_transmitted == 1) && (sio_rx_data[0] == 0x02))
{
sio_rx_data[0] = INIT_VALUE;
Wireshark_Settings = INIT_STATE;
stop_data = STOP_CAP;
while((number_of_bytes_to_be_transmitted = pal_sio_tx(SIO_CHANNEL, &stop_data, 1)) !=1);
}
}
}
/**
* Gets a NUL-terminated line of text from the serial console.
* Ends with a '\n' if a whole line was read. If EOF (CTRL-D) is read, or the
* buffer is filled, it does not end with a '\n'.
*
* NOTE: This routine blocks waiting for input. While this is arguably not
* allowed in this project, it does not matter, because this routine is never
* called by the watch program. It is simply included for completeness and
* debugging.
*
* @param buffer to put the read string
* @param bufsize the maximum number of chars to read, counting the ending NUL.
* @return the number of characters read, not counting the ending NUL.
*/
int sio_gets( char *buffer, unsigned int bufsize ) {
char *bp = buffer;
/*
** Loop as long as there is space in the buffer, leaving room for
** the terminating null byte.
*/
while( bufsize > 1 ) {
char ch = 0;
/*
** Get a character and see if it was a CTRL-D
*/
while(!(ch = sio_getchar()))
{
sleep();
}
if( ch == EOF ) {
/* Activate without storing anything */
break;
}
/* Store in the caller's buffer */
*bp++ = ch;
bufsize -= 1;
/* If this is a newline, activate */
if( ch == '\n' ) {
break;
}
}
/* Null-terminate the buffer and return */
*bp = '\0';
return bp - buffer;
}
void
main(void)
{
char inkey;
*LED = 0;
TIMER[TC_INCREMENT] = 1;
TIMER[TC_APPLY] = (1<<TC_INCREMENT);
#if 1
TIMER[TC_OCP1_START] = 0;
TIMER[TC_OCP1_STOP] = (1<<(TIMER_BITS-2))-1;
TIMER[TC_OCP2_START] = (1<<(TIMER_BITS-2));
TIMER[TC_OCP2_STOP] = (1<<(TIMER_BITS-1))-1;
#else
TIMER[TC_OCP1_START] = 0;
TIMER[TC_OCP1_STOP] = (1<<(TIMER_BITS-1))-1;
TIMER[TC_OCP2_START] = (1<<(TIMER_BITS-1));
TIMER[TC_OCP2_STOP] = (1<<(TIMER_BITS-0))-1;
#endif
#if 0
/* icp in the same time window as ocp */
TIMER[TC_ICP1_START] = 0;
TIMER[TC_ICP1_STOP] = (1<<(TIMER_BITS-2))-1;
TIMER[TC_ICP2_START] = (1<<(TIMER_BITS-2));
TIMER[TC_ICP2_STOP] = (1<<(TIMER_BITS-1))-1;
#else
/* icp wide open window */
TIMER[TC_ICP1_START] = 0;
TIMER[TC_ICP1_STOP] = (1<<(TIMER_BITS))-1;
TIMER[TC_ICP2_START] = 0;
TIMER[TC_ICP2_STOP] = (1<<(TIMER_BITS))-1;
#endif
TIMER[TC_INC_MIN] = 300;
TIMER[TC_INC_MAX] = 600;
TIMER[TC_ICP1] = 173; // setpoint ICP1
TIMER[TC_ICP2] = 689; // setpoint ICP2
TIMER[TC_CONTROL] = (1<<TCTRL_AND_OR_OCP1) | (1<<TCTRL_AND_OR_OCP2)
| (1<<TCTRL_AND_OR_ICP1) | (1<<TCTRL_AND_OR_ICP2)
| (1<<TCTRL_IE_OCP1) | (1<<TCTRL_IE_OCP2)
| (1<<TCTRL_IE_ICP1) | (1<<TCTRL_IE_ICP2)
| (1<<TCTRL_AFCEN_ICP1) | (0<<TCTRL_AFCINV_ICP1)
| (0<<TCTRL_AFCEN_ICP2) | (0<<TCTRL_AFCINV_ICP2)
| (1<<TCTRL_XOR_OCP1) | (1<<TCTRL_XOR_OCP2)
| (1<<TCTRL_XOR_ICP1) | (1<<TCTRL_XOR_ICP2)
| (1<<TCTRL_ENABLE_OCP1) | (1<<TCTRL_ENABLE_OCP2)
| (1<<TCTRL_ENABLE_ICP1) | (1<<TCTRL_ENABLE_ICP2)
;
TIMER[TC_APPLY] = (1<<TC_CONTROL)
| (1<<TC_OCP1_START) | (1<<TC_OCP1_STOP)
| (1<<TC_OCP2_START) | (1<<TC_OCP2_STOP)
| (1<<TC_ICP1_START) | (1<<TC_ICP1_STOP)
| (1<<TC_ICP2_START) | (1<<TC_ICP2_STOP)
| (1<<TC_INC_MIN) | (1<<TC_INC_MAX)
| (1<<TC_ICP1) | (1<<TC_ICP2)
;
/* isr_register_handler(interrput number, *isr_link) */
/* 2 is frame interrupt
** 3 is serial interrupt
** 4 is timer interrupt
*/
isr_register_handler(4, &timer_isr);
asm("ei");
for(;;)
{
DELAY(2000000);
inkey = sio_getchar(0);
switch(inkey)
{
case 3:
exit(0); /* CTRL+C */
case '-':
TIMER[TC_INCREMENT] -= 1;
TIMER[TC_APPLY] = (1<<TC_INCREMENT);
break;
case '+':
TIMER[TC_INCREMENT] += 1;
TIMER[TC_APPLY] = (1<<TC_INCREMENT);
break;
case ',':
TIMER[TC_INCREMENT] -= 100;
TIMER[TC_APPLY] = (1<<TC_INCREMENT);
break;
case '.':
TIMER[TC_INCREMENT] += 100;
TIMER[TC_APPLY] = (1<<TC_INCREMENT);
break;
}
switch(inkey)
{
case '\r':
case '-':
case '+':
case ',':
case '.':
print_timer();
break;
}
}
}
int
UARTClass::read(void)
{
return (sio_getchar(1));
}
