Wizard::Wizard(bool upgrade, QWidget *parent) :
QWizard(parent),
m_systemCheckIsOk(false)
{
setWindowTitle(i18n("Config Wizard"));
setPixmap(QWizard::WatermarkPixmap, QPixmap(QStandardPaths::locate(QStandardPaths::DataLocation, "banner.png")));
QWizardPage *page1 = new QWizardPage;
page1->setTitle(i18n("Welcome"));
if (upgrade)
m_welcomeLabel = new QLabel(i18n("Your Kdenlive version was upgraded to version %1. Please take some time to review the basic settings", QString(kdenlive_version).section(' ', 0, 0)), this);
else
m_welcomeLabel = new QLabel(i18n("This is the first time you run Kdenlive. This wizard will let you adjust some basic settings, you will be ready to edit your first movie in a few seconds..."), this);
m_welcomeLabel->setWordWrap(true);
m_startLayout = new QVBoxLayout;
m_startLayout->addWidget(m_welcomeLabel);
QPushButton *but = new QPushButton(QIcon::fromTheme("help-about"), i18n("Discover the features of this Kdenlive release"), this);
connect(but, &QPushButton::clicked, this, &Wizard::slotShowWebInfos);
m_startLayout->addStretch();
m_startLayout->addWidget(but);
page1->setLayout(m_startLayout);
addPage(page1);
QWizardPage *page4 = new QWizardPage;
page4->setTitle(i18n("Checking MLT engine"));
m_mltCheck.setupUi(page4);
addPage(page4);
WizardDelegate *listViewDelegate = new WizardDelegate(m_mltCheck.programList);
m_mltCheck.programList->setItemDelegate(listViewDelegate);
QWizardPage *page2 = new QWizardPage;
page2->setTitle(i18n("Video Standard"));
m_standard.setupUi(page2);
m_okIcon = QIcon::fromTheme("dialog-ok");
m_badIcon = QIcon::fromTheme("dialog-close");
// build profiles lists
QMap<QString, QString> profilesInfo = ProfilesDialog::getProfilesInfo();
QMap<QString, QString>::const_iterator i = profilesInfo.constBegin();
while (i != profilesInfo.constEnd()) {
QMap< QString, QString > profileData = ProfilesDialog::getSettingsFromFile(i.value());
if (profileData.value("width") == "720") m_dvProfiles.insert(i.key(), i.value());
else if (profileData.value("width").toInt() >= 1080) m_hdvProfiles.insert(i.key(), i.value());
else m_otherProfiles.insert(i.key(), i.value());
++i;
}
m_standard.button_all->setChecked(true);
connect(m_standard.button_all, SIGNAL(toggled(bool)), this, SLOT(slotCheckStandard()));
connect(m_standard.button_hdv, SIGNAL(toggled(bool)), this, SLOT(slotCheckStandard()));
connect(m_standard.button_dv, SIGNAL(toggled(bool)), this, SLOT(slotCheckStandard()));
slotCheckStandard();
connect(m_standard.profiles_list, SIGNAL(itemSelectionChanged()), this, SLOT(slotCheckSelectedItem()));
// select default profile
if (!KdenliveSettings::default_profile().isEmpty()) {
for (int i = 0; i < m_standard.profiles_list->count(); ++i) {
if (m_standard.profiles_list->item(i)->data(Qt::UserRole).toString() == KdenliveSettings::default_profile()) {
m_standard.profiles_list->setCurrentRow(i);
m_standard.profiles_list->scrollToItem(m_standard.profiles_list->currentItem());
break;
}
}
}
addPage(page2);
QWizardPage *page3 = new QWizardPage;
page3->setTitle(i18n("Additional Settings"));
m_extra.setupUi(page3);
m_extra.projectfolder->setMode(KFile::Directory);
m_extra.projectfolder->setUrl(QUrl(KdenliveSettings::defaultprojectfolder()));
m_extra.videothumbs->setChecked(KdenliveSettings::videothumbnails());
m_extra.audiothumbs->setChecked(KdenliveSettings::audiothumbnails());
m_extra.autosave->setChecked(KdenliveSettings::crashrecovery());
connect(m_extra.videothumbs, SIGNAL(stateChanged(int)), this, SLOT(slotCheckThumbs()));
connect(m_extra.audiothumbs, SIGNAL(stateChanged(int)), this, SLOT(slotCheckThumbs()));
slotCheckThumbs();
addPage(page3);
#ifndef Q_WS_MAC
QWizardPage *page6 = new QWizardPage;
page6->setTitle(i18n("Capture device"));
m_capture.setupUi(page6);
bool found_decklink = Render::getBlackMagicDeviceList(m_capture.decklink_devices);
KdenliveSettings::setDecklink_device_found(found_decklink);
if (found_decklink) m_capture.decklink_status->setText(i18n("Default Blackmagic Decklink card:"));
else m_capture.decklink_status->setText(i18n("No Blackmagic Decklink device found"));
connect(m_capture.decklink_devices, SIGNAL(currentIndexChanged(int)), this, SLOT(slotUpdateDecklinkDevice(int)));
connect(m_capture.button_reload, SIGNAL(clicked()), this, SLOT(slotDetectWebcam()));
connect(m_capture.v4l_devices, SIGNAL(currentIndexChanged(int)), this, SLOT(slotUpdateCaptureParameters()));
connect(m_capture.v4l_formats, SIGNAL(currentIndexChanged(int)), this, SLOT(slotSaveCaptureFormat()));
m_capture.button_reload->setIcon(QIcon::fromTheme("view-refresh"));
addPage(page6);
#endif
QWizardPage *page5 = new QWizardPage;
page5->setTitle(i18n("Checking system"));
m_check.setupUi(page5);
addPage(page5);
listViewDelegate = new WizardDelegate(m_check.programList);
m_check.programList->setItemDelegate(listViewDelegate);
slotDetectWebcam();
QTimer::singleShot(500, this, SLOT(slotCheckMlt()));
}
Wizard::Wizard(bool upgrade, QWidget *parent) :
QWizard(parent)
{
setWindowTitle(i18n("Config Wizard"));
setPixmap(QWizard::WatermarkPixmap, QPixmap(KStandardDirs::locate("appdata", "banner.png")));
QWizardPage *page1 = new QWizardPage;
page1->setTitle(i18n("Welcome"));
QLabel *label;
if (upgrade)
label = new QLabel(i18n("Your Kdenlive version was upgraded. Please take some time to review the basic settings"));
else
label = new QLabel(i18n("This is the first time you run Kdenlive. This wizard will let you adjust some basic settings, you will be ready to edit your first movie in a few seconds..."));
label->setWordWrap(true);
m_startLayout = new QVBoxLayout;
m_startLayout->addWidget(label);
page1->setLayout(m_startLayout);
addPage(page1);
QWizardPage *page4 = new QWizardPage;
page4->setTitle(i18n("Checking MLT engine"));
m_mltCheck.setupUi(page4);
addPage(page4);
WizardDelegate *listViewDelegate = new WizardDelegate(m_mltCheck.programList);
m_mltCheck.programList->setItemDelegate(listViewDelegate);
QWizardPage *page2 = new QWizardPage;
page2->setTitle(i18n("Video Standard"));
m_standard.setupUi(page2);
m_okIcon = KIcon("dialog-ok");
m_badIcon = KIcon("dialog-close");
// build profiles lists
QMap<QString, QString> profilesInfo = ProfilesDialog::getProfilesInfo();
QMap<QString, QString>::const_iterator i = profilesInfo.constBegin();
while (i != profilesInfo.constEnd()) {
QMap< QString, QString > profileData = ProfilesDialog::getSettingsFromFile(i.value());
if (profileData.value("width") == "720") m_dvProfiles.insert(i.key(), i.value());
else if (profileData.value("width").toInt() >= 1080) m_hdvProfiles.insert(i.key(), i.value());
else m_otherProfiles.insert(i.key(), i.value());
++i;
}
m_standard.button_all->setChecked(true);
connect(m_standard.button_all, SIGNAL(toggled(bool)), this, SLOT(slotCheckStandard()));
connect(m_standard.button_hdv, SIGNAL(toggled(bool)), this, SLOT(slotCheckStandard()));
connect(m_standard.button_dv, SIGNAL(toggled(bool)), this, SLOT(slotCheckStandard()));
slotCheckStandard();
connect(m_standard.profiles_list, SIGNAL(itemSelectionChanged()), this, SLOT(slotCheckSelectedItem()));
if (!KdenliveSettings::default_profile().isEmpty()) {
for (int i = 0; i < m_standard.profiles_list->count(); i++) {
if (m_standard.profiles_list->item(i)->data(Qt::UserRole).toString() == KdenliveSettings::default_profile()) {
m_standard.profiles_list->setCurrentRow(i);
m_standard.profiles_list->scrollToItem(m_standard.profiles_list->currentItem());
break;
}
}
}
// select default profile
fprintf(stderr, "LOOKING FOR: %s", ProfilesDialog::getProfileDescription(KdenliveSettings::default_profile()).toUtf8().data());
QList<QListWidgetItem *> profiles = m_standard.profiles_list->findItems(ProfilesDialog::getProfileDescription(KdenliveSettings::default_profile()), Qt::MatchExactly);
if (profiles.count() > 0) m_standard.profiles_list->setCurrentItem(profiles.at(0));
fprintf(stderr, "LOOKING FOR: %s // %d", ProfilesDialog::getProfileDescription(KdenliveSettings::default_profile()).toUtf8().data(), profiles.count());
addPage(page2);
QWizardPage *page3 = new QWizardPage;
page3->setTitle(i18n("Additional Settings"));
m_extra.setupUi(page3);
m_extra.projectfolder->setMode(KFile::Directory);
m_extra.projectfolder->setPath(KdenliveSettings::defaultprojectfolder());
m_extra.videothumbs->setChecked(KdenliveSettings::videothumbnails());
m_extra.audiothumbs->setChecked(KdenliveSettings::audiothumbnails());
m_extra.autosave->setChecked(KdenliveSettings::crashrecovery());
connect(m_extra.videothumbs, SIGNAL(stateChanged(int)), this, SLOT(slotCheckThumbs()));
connect(m_extra.audiothumbs, SIGNAL(stateChanged(int)), this, SLOT(slotCheckThumbs()));
slotCheckThumbs();
addPage(page3);
QWizardPage *page5 = new QWizardPage;
page5->setTitle(i18n("Checking system"));
m_check.setupUi(page5);
addPage(page5);
listViewDelegate = new WizardDelegate(m_check.programList);
m_check.programList->setItemDelegate(listViewDelegate);
QTimer::singleShot(500, this, SLOT(slotCheckMlt()));
}
