void UMLOperationDialog::slotParmPopupMenuSel(int id) {
    if( id == ListPopupMenu::mt_Rename || id == ListPopupMenu::mt_Properties ) {
        slotParameterProperties();
    } else if( id == ListPopupMenu::mt_New_Parameter ) {
        slotNewParameter();
    }
    else if( id == ListPopupMenu::mt_Delete ) {
        slotDeleteParameter();
    }
}
Example #2
0
/**
 * Sets up the dialog.
 */
void UMLOperationDialog::setupDialog()
{
    QFrame *frame = new QFrame(this);
    setMainWidget(frame);
    int margin = fontMetrics().height();
    QVBoxLayout * topLayout = new QVBoxLayout(frame);

    m_pGenGB = new QGroupBox(i18n("General Properties"), frame);
    QGridLayout * genLayout = new QGridLayout(m_pGenGB);
    genLayout->setColumnStretch(1, 1);
    genLayout->setColumnStretch(3, 1);
    genLayout->addItem(new QSpacerItem(200, 0), 0, 1);
    genLayout->addItem(new QSpacerItem(200, 0), 0, 3);
    genLayout->setMargin(margin);
    genLayout->setSpacing(10);

    Dialog_Utils::makeLabeledEditField(genLayout, 0,
                                    m_pNameL, i18nc("operation name", "&Name:"),
                                    m_pNameLE, m_operation->name());

    m_pRtypeL = new QLabel(i18n("&Type:"), m_pGenGB);
    genLayout->addWidget(m_pRtypeL, 0, 2);

    m_pRtypeCB = new KComboBox(true, m_pGenGB);
    genLayout->addWidget(m_pRtypeCB, 0, 3);
    m_pRtypeL->setBuddy(m_pRtypeCB);

    m_stereotypeWidget = new UMLStereotypeWidget(m_operation);
    m_stereotypeWidget->addToLayout(genLayout, 1);

    m_pAbstractCB = new QCheckBox(i18n("&Abstract operation"), m_pGenGB);
    m_pAbstractCB->setChecked(m_operation->isAbstract());
    genLayout->addWidget(m_pAbstractCB, 2, 0);
    m_pStaticCB = new QCheckBox(i18n("Classifier &scope (\"static\")"), m_pGenGB);
    m_pStaticCB->setChecked(m_operation->isStatic());
    genLayout->addWidget(m_pStaticCB, 2, 1);
    m_pQueryCB = new QCheckBox(i18n("&Query (\"const\")"), m_pGenGB);
    m_pQueryCB->setChecked(m_operation->getConst());
    genLayout->addWidget(m_pQueryCB, 2, 2);

    m_visibilityEnumWidget = new VisibilityEnumWidget(m_operation, this);

    m_docWidget = new DocumentationWidget(m_operation, this);

    m_pParmsGB = new QGroupBox(i18n("Parameters"), frame);
    QVBoxLayout* parmsLayout = new QVBoxLayout(m_pParmsGB);
    parmsLayout->setMargin(margin);
    parmsLayout->setSpacing(10);

    // horizontal box contains the list box and the move up/down buttons
    QHBoxLayout* parmsHBoxLayout = new QHBoxLayout();
    m_pParmsLW = new QListWidget(m_pParmsGB);
    m_pParmsLW->setContextMenuPolicy(Qt::CustomContextMenu);

    // the move up/down buttons (another vertical box)
    QVBoxLayout* buttonLayout = new QVBoxLayout();

    m_pUpButton = new QToolButton(m_pParmsGB);
    m_pUpButton->setArrowType(Qt::UpArrow);
    m_pUpButton->setEnabled(false);
    buttonLayout->addWidget(m_pUpButton);

    m_pDownButton = new QToolButton(m_pParmsGB);
    m_pDownButton->setArrowType(Qt::DownArrow);
    m_pDownButton->setEnabled(false);
    buttonLayout->addWidget(m_pDownButton);

#if QT_VERSION >= 0x050000
    QDialogButtonBox* buttonBox = new QDialogButtonBox(m_pParmsGB);
    QPushButton* newParam = buttonBox->addButton(i18n("Ne&w Parameter..."), QDialogButtonBox::ActionRole);
    connect(newParam, SIGNAL(clicked()), this, SLOT(slotNewParameter()));
    m_pDeleteButton = buttonBox->addButton(i18n("&Delete"), QDialogButtonBox::ActionRole);
    connect(m_pDeleteButton, SIGNAL(clicked()), this, SLOT(slotDeleteParameter()));
    m_pPropertiesButton = buttonBox->addButton(i18n("&Properties"), QDialogButtonBox::ActionRole);
    connect(m_pPropertiesButton, SIGNAL(clicked()), this, SLOT(slotParameterProperties()));
#else
    KDialogButtonBox* buttonBox = new KDialogButtonBox(m_pParmsGB);
    buttonBox->addButton(i18n("Ne&w Parameter..."), KDialogButtonBox::ActionRole,
                          this, SLOT(slotNewParameter()));
    m_pDeleteButton = buttonBox->addButton(i18n("&Delete"), KDialogButtonBox::ActionRole,
                                            this, SLOT(slotDeleteParameter()));
    m_pPropertiesButton = buttonBox->addButton(i18n("&Properties"), KDialogButtonBox::ActionRole,
                          this, SLOT(slotParameterProperties()));
#endif

    parmsHBoxLayout->addWidget(m_pParmsLW);
    parmsHBoxLayout->addLayout(buttonLayout);

    parmsLayout->addLayout(parmsHBoxLayout);
    parmsLayout->addWidget(buttonBox);

    topLayout->addWidget(m_pGenGB);
    topLayout->addWidget(m_visibilityEnumWidget);
    topLayout->addWidget(m_docWidget);
    topLayout->addWidget(m_pParmsGB);

    m_pDeleteButton->setEnabled(false);
    m_pPropertiesButton->setEnabled(false);
    m_pUpButton->setEnabled(false);
    m_pDownButton->setEnabled(false);

    m_pRtypeCB->setDuplicatesEnabled(false); // only allow one of each type in box
#if QT_VERSION < 0x050000
    m_pRtypeCB->setCompletionMode(KGlobalSettings::CompletionPopup);
#endif
    // add the return types
    insertTypesSorted(m_operation->getTypeName());

    // fill in parm list box
    UMLAttributeList list = m_operation->getParmList();
    foreach (UMLAttribute* pAtt, list) {
        m_pParmsLW->addItem(pAtt->toString(Uml::SignatureType::SigNoVis));
    }
void UMLOperationDialog::setupDialog() {

    int margin = fontMetrics().height();
    QVBoxLayout * topLayout = new QVBoxLayout( plainPage() );

    m_pGenGB = new QGroupBox(i18n("General Properties"), plainPage() );
    QGridLayout * genLayout = new QGridLayout(m_pGenGB, 3, 4 );
    genLayout -> setColStretch(1, 1);
    genLayout -> setColStretch(3, 1);
    genLayout -> addColSpacing(1, 200);
    genLayout -> addColSpacing(3, 200);
    genLayout -> setMargin(margin);
    genLayout -> setSpacing(10);

    Dialog_Utils::makeLabeledEditField( m_pGenGB, genLayout, 0,
                                    m_pNameL, i18n("&Name:"),
                                    m_pNameLE, m_pOperation->getName() );

    m_pRtypeL = new QLabel(i18n("&Type:"), m_pGenGB );
    genLayout -> addWidget(m_pRtypeL, 0, 2);

    m_pRtypeCB = new KComboBox(true, m_pGenGB );
    genLayout -> addWidget(m_pRtypeCB, 0, 3);
    m_pRtypeL->setBuddy(m_pRtypeCB);

    m_pStereoTypeL = new QLabel( i18n("Stereotype name:"), m_pGenGB );
    genLayout -> addWidget(m_pStereoTypeL, 1, 0);
    m_pStereoTypeCB = new KComboBox(true, m_pGenGB );
    genLayout -> addWidget(m_pStereoTypeCB, 1, 1);

    m_pAbstractCB = new QCheckBox( i18n("&Abstract operation"), m_pGenGB );
    m_pAbstractCB -> setChecked( m_pOperation->getAbstract() );
    genLayout -> addWidget( m_pAbstractCB, 2, 0 );
    m_pStaticCB = new QCheckBox( i18n("Classifier &scope (\"static\")"), m_pGenGB );
    m_pStaticCB -> setChecked( m_pOperation->getStatic() );
    genLayout -> addWidget( m_pStaticCB, 2, 1 );
    m_pQueryCB = new QCheckBox( i18n("&Query (\"const\")"), m_pGenGB );
    m_pQueryCB -> setChecked( m_pOperation->getConst() );
    genLayout -> addWidget( m_pQueryCB, 2, 2 );

    topLayout -> addWidget( m_pGenGB );

    m_pScopeBG = new QButtonGroup(i18n("Visibility"), plainPage() );

    QHBoxLayout * scopeLayout = new QHBoxLayout(m_pScopeBG);
    scopeLayout -> setMargin(margin);

    m_pPublicRB = new QRadioButton(i18n("P&ublic"), m_pScopeBG);
    scopeLayout -> addWidget(m_pPublicRB);

    m_pPrivateRB = new QRadioButton(i18n("P&rivate"), m_pScopeBG);
    scopeLayout -> addWidget(m_pPrivateRB);

    m_pProtectedRB = new QRadioButton(i18n("Prot&ected"), m_pScopeBG);
    scopeLayout -> addWidget(m_pProtectedRB);

    m_pImplementationRB = new QRadioButton(i18n("I&mplementation"), m_pScopeBG);
    scopeLayout -> addWidget(m_pImplementationRB);

    topLayout -> addWidget(m_pScopeBG);

    m_pParmsGB = new QGroupBox(i18n("Parameters"), plainPage() );
    QVBoxLayout* parmsLayout = new QVBoxLayout(m_pParmsGB);
    parmsLayout->setMargin(margin);
    parmsLayout->setSpacing(10);

    //horizontal box contains the list box and the move up/down buttons
    QHBoxLayout* parmsHBoxLayout = new QHBoxLayout(parmsLayout);
    m_pParmsLB = new QListBox(m_pParmsGB);
    parmsHBoxLayout->addWidget(m_pParmsLB);

    //the move up/down buttons (another vertical box)
    QVBoxLayout* buttonLayout = new QVBoxLayout( parmsHBoxLayout );
    m_pUpButton = new KArrowButton( m_pParmsGB );
    m_pUpButton->setEnabled( false );
    buttonLayout->addWidget( m_pUpButton );

    m_pDownButton = new KArrowButton( m_pParmsGB, Qt::DownArrow );
    m_pDownButton->setEnabled( false );
    buttonLayout->addWidget( m_pDownButton );

    KButtonBox* buttonBox = new KButtonBox(m_pParmsGB);
    buttonBox->addButton( i18n("Ne&w Parameter..."), this, SLOT(slotNewParameter()) );
    m_pDeleteButton = buttonBox->addButton( i18n("&Delete"), this, SLOT(slotDeleteParameter()) );
    m_pPropertiesButton = buttonBox->addButton( i18n("&Properties"), this,
                          SLOT(slotParameterProperties()) );
    parmsLayout->addWidget(buttonBox);

    topLayout -> addWidget(m_pParmsGB);

    m_pDeleteButton->setEnabled(false);
    m_pPropertiesButton->setEnabled(false);
    m_pUpButton->setEnabled(false);
    m_pDownButton->setEnabled(false);

    // Add "void". We use this for denoting "no return type" independent
    // of the programming language.
    // For example, the Ada generator would interpret the return type
    // "void" as an instruction to generate a procedure instead of a
    // function.
    insertType( "void" );

    m_pRtypeCB->setDuplicatesEnabled(false);//only allow one of each type in box
    m_pRtypeCB->setCompletionMode( KGlobalSettings::CompletionPopup );

    // add template parameters
    UMLClassifier *classifier = dynamic_cast<UMLClassifier*>(m_pOperation->parent());
    if (classifier) {
        UMLClassifierListItemList tmplParams( classifier->getFilteredList(Uml::ot_Template) );
        for (UMLClassifierListItem *li = tmplParams.first(); li; li = tmplParams.next())
            insertType( li->getName() );
    }
    //now add the Classes and Interfaces (both are Concepts)
    UMLClassifierList namesList( m_doc->getConcepts() );
    UMLClassifier* pConcept = 0;
    for(pConcept=namesList.first(); pConcept!=0 ;pConcept=namesList.next()) {
        insertType( pConcept->getFullyQualifiedName() );
    }

    //work out which one to select
    int returnBoxCount = 0;
    bool foundReturnType = false;
    while (returnBoxCount < m_pRtypeCB->count() && foundReturnType == false) {
        QString returnBoxString = m_pRtypeCB->text(returnBoxCount);
        if ( returnBoxString == m_pOperation->getTypeName() ) {
            foundReturnType = true;
            m_pRtypeCB->setCurrentItem(returnBoxCount);
            break;
        }
        returnBoxCount++;
    }

    if (!foundReturnType) {
        insertType( m_pOperation->getTypeName(), 0 );
        m_pRtypeCB->setCurrentItem(0);
    }

    //fill in parm list box
    UMLAttributeList list = m_pOperation->getParmList();
    UMLAttribute * pAtt = 0;
    for (pAtt = list.first(); pAtt; pAtt = list.next())
        m_pParmsLB->insertItem( pAtt->getName() );

    //set scope
    Uml::Visibility scope = m_pOperation -> getVisibility();
    if( scope == Uml::Visibility::Public )
      m_pPublicRB -> setChecked( true );
    else if( scope == Uml::Visibility::Private )
      m_pPrivateRB -> setChecked( true );
    else if( scope == Uml::Visibility::Protected )
      m_pProtectedRB -> setChecked( true );
    else if( scope == Uml::Visibility::Implementation )
      m_pImplementationRB -> setChecked( true );

    // manage stereotypes
    m_pStereoTypeCB -> setDuplicatesEnabled(false);//only allow one of each type in box
    m_pStereoTypeCB->setCompletionMode( KGlobalSettings::CompletionPopup );
    insertStereotype (QString("")); // an empty stereotype is the default
    int defaultStereotype=0;
    bool foundDefaultStereotype = false;
    for (UMLStereotypeListIt it(m_doc->getStereotypes()); it.current(); ++it) {
        if (!foundDefaultStereotype) {
            if ( m_pOperation->getStereotype() == it.current()->getName()) {
                foundDefaultStereotype = true;
            }
            defaultStereotype++;
        }
        insertStereotype (it.current()->getName());
    }
    // lookup for a default stereotype, if the operation doesn't have one
    if (foundDefaultStereotype)
        m_pStereoTypeCB->setCurrentItem(defaultStereotype);
    else
        m_pStereoTypeCB->setCurrentItem(-1);

    //setup parm list box signals
    connect( m_pUpButton, SIGNAL( clicked() ), this, SLOT( slotParameterUp() ) );
    connect( m_pDownButton, SIGNAL( clicked() ), this, SLOT( slotParameterDown() ) );

    connect(m_pParmsLB, SIGNAL(clicked(QListBoxItem*)),
            this, SLOT(slotParamsBoxClicked(QListBoxItem*)));

    connect(m_pParmsLB, SIGNAL(rightButtonPressed(QListBoxItem *, const QPoint &)),
            this, SLOT(slotParmRightButtonPressed(QListBoxItem *, const QPoint &)));

    connect(m_pParmsLB, SIGNAL(rightButtonClicked(QListBoxItem *, const QPoint &)),
            this, SLOT(slotParmRightButtonClicked(QListBoxItem *, const QPoint &)));


    connect(m_pParmsLB, SIGNAL(doubleClicked(QListBoxItem *)),
            this, SLOT(slotParmDoubleClick(QListBoxItem *)));

    m_pNameLE->setFocus();
    connect( m_pNameLE, SIGNAL( textChanged ( const QString & ) ), SLOT( slotNameChanged( const QString & ) ) );
    slotNameChanged(m_pNameLE->text() );

}