AstKeyMap *smf_subinst_keymap( smf_subinst_t subinst, const smfData * indata,
const Grp * igrp, size_t idx, int * status ) {
const smfHead * hdr = NULL; /* Header of file to be examined */
size_t i;
smfData * sub_data = NULL; /* File to be examined */
AstKeyMap * sub_instruments; /* Keymap to be filled */
if (*status != SAI__OK) return NULL;
if (subinst == SMF__SUBINST_NONE && !indata && !igrp) {
*status = SAI__ERROR;
errRep( "", "Must supply either a subinst, a smfData or a Grp"
" (possible programming error)", status );
return NULL;
}
/* Create new keymap */
sub_instruments = astKeyMap( " " );
/* prefill with the list of known sub-instruments. */
for (i = 0; i < SMF__SUBINST_NSUBINST; i++ ) {
const char * substr = smf_subinst_str( i, status );
if (substr) astMapPut0I( sub_instruments, substr, 0, NULL );
}
/* If the current sub-instrument has not been supplied, get it from the file.
Use indata in preference to the group */
if( subinst == SMF__SUBINST_NONE ) {
if (indata) {
hdr = indata->hdr;
} else {
smf_open_file( igrp, idx, "READ", SMF__NOCREATE_DATA, &sub_data, status );
if (sub_data) {
hdr = sub_data->hdr;
}
}
if (hdr) subinst = smf_calc_subinst( hdr, status );
}
/* flag this as being the relevant sub-instrument */
if (subinst != SMF__SUBINST_NSUBINST ) {
const char * substr = smf_subinst_str( subinst, status );
if (substr) {
astMapPut0I( sub_instruments, substr, 1, NULL );
}
}
if (sub_data) smf_close_file( &sub_data, status );
/* Free the keymap if we have bad status */
if (*status != SAI__OK && sub_instruments) {
sub_instruments = astAnnul( sub_instruments );
}
return sub_instruments;
}
void smf_grp_related( const Grp *igrp, const size_t grpsize,
const int grouping, const int checksubinst,
double maxlen_s, double *srate_maxlen,
AstKeyMap *keymap, dim_t *maxconcatlen,
dim_t *maxfilelen, smfGroup **group,
Grp **basegrp, dim_t *pad, int *status ) {
/* Local variables */
size_t *chunk=NULL; /* Array of flags for continuous chunks */
dim_t * chunklen = NULL; /* Length of continuous chunk */
size_t currentindex = 0; /* Counter */
char cwave[10]; /* String containing wavelength */
smfData *data = NULL; /* Current smfData */
double downsampscale=0; /* Angular scale downsampling size */
double downsampfreq=0; /* Target downsampling frequency */
AstKeyMap * grouped = NULL; /* Primary AstKeyMap for grouping */
size_t i; /* Loop counter for index into Grp */
int isFFT=0; /* Set if data are 4d FFT */
size_t j; /* Loop counter */
int *keepchunk=NULL; /* Flag for chunks that will be kept */
dim_t maxconcat=0; /* Longest continuous chunk length */
dim_t maxflen=0; /* Max file length in time steps */
dim_t maxlen=0; /* Maximum concat length in samples */
int maxlen_scaled=0; /* Set once maxlen has been scaled, if needed */
dim_t maxpad=0; /* Maximum padding neeed for any input file */
size_t maxrelated = 0; /* Keep track of max number of related items */
size_t *new_chunk=NULL; /* keeper chunks associated with subgroups */
dim_t *new_tlen=NULL; /* tlens for new_subgroup */
size_t ngroups = 0; /* Counter for subgroups to be stored */
size_t nkeep = 0; /* Number of chunks to keep */
dim_t * piecelen = NULL; /* Length of single file */
smf_subinst_t refsubinst; /* Subinst of first file */
size_t **subgroups = NULL; /* Array containing index arrays to parent Grp */
smf_subinst_t subinst; /* Subinst of current file */
if ( *status != SAI__OK ) return;
if( maxlen_s < 0 ) {
*status = SAI__ERROR;
errRep( "", FUNC_NAME ": maxlen_s cannot be < 0!", status );
return;
}
/* Get downsampling parameters */
if( keymap ) {
smf_get_cleanpar( keymap, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL, NULL,
NULL, NULL, NULL, NULL, &downsampscale, &downsampfreq,
NULL, NULL, NULL, NULL, status );
if( downsampscale && downsampfreq ) {
*status = SAI__ERROR;
errRep( "", FUNC_NAME ": both downsampscale and downsampfreq are set",
status );
return;
}
}
/* Initialize refcwave */
refsubinst = SMF__SUBINST_NONE;
/* Loop over files in input Grp: remember Grps are indexed from 1 */
grouped = astKeyMap( "SortBy=KeyUp" );
for (i=1; i<=grpsize; i++) {
char newkey[128];
char dateobs[81];
char subarray[10];
size_t nrelated = 0;
AstKeyMap * filemap = NULL;
AstKeyMap * indexmap = NULL;
/* First step: open file and harvest metadata */
smf_open_file( NULL, igrp, i, "READ", SMF__NOCREATE_DATA, &data, status );
if (*status != SAI__OK) break;
if( i==1 ) {
isFFT = smf_isfft( data, NULL, NULL, NULL, NULL, NULL, status );
} else if( smf_isfft(data, NULL, NULL, NULL, NULL, NULL, status) != isFFT ){
*status = SAI__ERROR;
errRep( "", FUNC_NAME
": mixture of time-series and FFT data encountered!",
status );
break;
}
/* If maxlen has not been set, do it here */
if( !maxlen && maxlen_s && data->hdr->steptime) {
maxlen = (dim_t) (maxlen_s / data->hdr->steptime );
}
/* Return srate_maxlen if requested: may want to know this number
even if maxlen_s is not set. Only calculate once, although it
gets overwritten once later if down-sampling. */
if( (i==1) && srate_maxlen && data->hdr->steptime ) {
*srate_maxlen = 1. / (double) data->hdr->steptime;
}
/* If requested check to see if we are mixing wavelengths */
if( checksubinst ) {
if( refsubinst == SMF__SUBINST_NONE ) {
refsubinst = smf_calc_subinst( data->hdr, status );
}
subinst = smf_calc_subinst( data->hdr, status );
if( subinst != refsubinst ) {
const char *refsubstr = smf_subinst_str( refsubinst, status );
const char *substr = smf_subinst_str( subinst, status );
*status = SAI__ERROR;
smf_smfFile_msg( data->file, "FILE", 1, "<unknown>" );
msgSetc( "REFSUB", refsubstr );
msgSetc( "SUB", substr );
errRep( "", FUNC_NAME
": ^FILE uses sub-instrument ^SUB which doesn't match "
"reference ^REFSUB", status );
}
}
/* Want to form a key that will be unique for a particular subscan
We know that DATE-OBS will be set for SCUBA-2 files and be the same
for a single set. Prefix by wavelength if we are grouping by wavelength.
*/
newkey[0] = '\0';
smf_find_subarray( data->hdr, subarray, sizeof(subarray), NULL, status );
if( grouping == 1 ) {
/* Group different wavelengths separately */
smf_fits_getS( data->hdr, "WAVELEN", cwave, sizeof(cwave), status);
one_strlcat( newkey, cwave, sizeof(newkey), status );
one_strlcat( newkey, "_", sizeof(newkey), status );
}
if( grouping == 2 ) {
/* Group different subarrays separately */
one_strlcat( newkey, subarray, sizeof(newkey), status );
}
smf_fits_getS( data->hdr, "DATE-OBS", dateobs, sizeof(dateobs), status );
one_strlcat( newkey, dateobs, sizeof(newkey), status );
/* Include the dimentionality of the time series in the primary key
so that we do not end up doing something confusing like relating
a truncated file with a full length file */
if (*status == SAI__OK) {
dim_t dims[3];
char formatted[32];
smf_get_dims( data, &dims[0], &dims[1], NULL, &dims[2], NULL, NULL, NULL,
status );
sprintf(formatted, "_%" DIM_T_FMT "_%" DIM_T_FMT "_%" DIM_T_FMT, dims[0], dims[1], dims[2]);
one_strlcat( newkey, formatted, sizeof(newkey), status );
}
/* May want to read the dimensionality of the file outside of loop
so that we can compare values when storing in the keymap */
/* Now we want to create a keymap based on this key */
if (!astMapGet0A( grouped, newkey, &filemap ) ) {
int itemp = 0;
double steptime = data->hdr->steptime;
dim_t ntslice = 0;
dim_t thispad; /* Padding neeed for current input file */
filemap = astKeyMap( " " );
astMapPut0A( grouped, newkey, filemap, NULL );
/* Fill up filemap with general information on this file */
smf_find_seqcount( data->hdr, &itemp, status );
astMapPut0I( filemap, "SEQCOUNT", itemp, NULL );
smf_fits_getI( data->hdr, "NSUBSCAN", &itemp, status );
astMapPut0I( filemap, "NSUBSCAN", itemp, NULL );
/* Number of time slices */
smf_get_dims( data, NULL, NULL, NULL, &ntslice, NULL, NULL, NULL,
status );
/* Find length of down-sampled data, new steptime and maxlen */
if( (downsampscale || downsampfreq) && data->hdr && (*status==SAI__OK) ) {
double scalelen;
if( downsampscale ) {
if( data->hdr->scanvel != VAL__BADD ) {
double oldscale = steptime * data->hdr->scanvel;
scalelen = oldscale / downsampscale;
} else if( *status == SAI__OK ) {
*status = SAI__ERROR;
scalelen = VAL__BADD;
smf_smfFile_msg( data->file, "FILE", 1, "" );
errRep( "", FUNC_NAME ": can't resample ^FILE because it has "
"unknown scan velocity", status );
}
} else {
if( steptime ) {
double oldsampfreq = 1./steptime;
scalelen = downsampfreq / oldsampfreq;
} else {
*status = SAI__ERROR;
scalelen = VAL__BADD;
smf_smfFile_msg( data->file, "FILE", 1, "" );
errRep( "", FUNC_NAME ": can't resample ^FILE because it has "
"unknown sample rate", status );
}
}
/* only down-sample if it will be a reasonable factor */
if( (*status==SAI__OK) && (scalelen <= SMF__DOWNSAMPLIMIT) ) {
smf_smfFile_msg(data->file, "FILE", 1, "" );
msgOutiff( MSG__VERB, "", FUNC_NAME
": will down-sample file ^FILE from %5.1lf Hz to "
"%5.1lf Hz", status, (1./steptime), (scalelen/steptime) );
ntslice = round(ntslice * scalelen);
/* If maxlen has been requested, and we have not already worked
out a scaled version (just uses the sample rates for the first
file... should be close enough -- the alternative is a 2-pass
system). */
if( !maxlen_scaled ) {
maxlen = round(maxlen*scalelen);
maxlen_scaled = 1;
msgOutiff( MSG__VERB, "", FUNC_NAME
": requested maxlen %g seconds = %" DIM_T_FMT " down-sampled "
"time-slices", status, maxlen_s, maxlen );
/* Return updated srate_maxlen for down-sampling if requested */
if( srate_maxlen ) {
*srate_maxlen = scalelen/steptime;
}
}
}
}
/* Check that an individual file is too long (we assume related
files are all the same) */
if( maxlen && (ntslice > maxlen) && *status == SAI__OK) {
*status = SAI__ERROR;
msgSeti("NTSLICE",ntslice);
msgSeti("MAXLEN",maxlen);
smf_smfFile_msg( data->file, "FILE", 1, "" );
errRep(FUNC_NAME,
"Number of time steps in file ^FILE time exceeds maximum "
"(^NTSLICE>^MAXLEN)", status);
}
/* Scaled values of ntslice and maximum length */
astMapPut0I( filemap, "NTSLICE", ntslice, NULL );
/* Work out the padding needed for this file including downsampling. */
if( keymap ) {
thispad = smf_get_padding( keymap, 0, data->hdr, VAL__BADD, status );
if( thispad > maxpad ) maxpad = thispad;
} else {
thispad = 0;
}
astMapPut0I( filemap, "PADDING", thispad, NULL );
/* Update maxflen */
if( ntslice > maxflen ) {
maxflen = ntslice;
}
/* Store OBSID or OBSIDSS depending on whether we are grouping by wavelength */
if (grouping) {
astMapPut0C( filemap, "OBSID", data->hdr->obsidss, NULL );
} else {
char obsid[81];
smf_getobsidss( data->hdr->fitshdr, obsid, sizeof(obsid), NULL, 0, status );
astMapPut0C( filemap, "OBSID", obsid, NULL );
}
}
/* Store the file index in another keymap indexed by subarray */
if ( !astMapGet0A( filemap, "GRPINDICES", &indexmap ) ) {
indexmap = astKeyMap( "SortBy=KeyUp" );
astMapPut0A( filemap, "GRPINDICES", indexmap, NULL );
}
astMapPut0I( indexmap, subarray, i, NULL );
/* Need to track the largest number of related subarrays in a single slot */
nrelated = astMapSize( indexmap );
if (nrelated > maxrelated) maxrelated = nrelated;
/* Free resources */
filemap = astAnnul( filemap );
indexmap = astAnnul( indexmap );
smf_close_file( NULL, &data, status );
}
/* We now know how many groups there are */
ngroups = astMapSize( grouped );
/* Sort out chunking. The items are sorted by date and then by wavelength.
We define a continuous chunk if it has the same OBSID, the same SEQCOUNT
and NSUBSCAN increments by one from the previous entry.
Also count number of related items in each slot.
*/
if (*status == SAI__OK) {
typedef struct { /* somewhere to store the values easily */
char obsid[81];
char related[81]; /* for concatenated subarrays */
int nsubscan;
int seqcount;
} smfCompareSeq;
smfCompareSeq current;
smfCompareSeq previous;
dim_t totlen = 0;
size_t thischunk;
/* Get the chunk flags and also store the size of the chunk */
chunk = astCalloc( ngroups, sizeof(*chunk) );
chunklen = astCalloc( ngroups, sizeof(*chunklen) );
piecelen = astCalloc( ngroups, sizeof(*piecelen) );
thischunk = 0; /* The current chunk */
for (i=0; i<ngroups; i++) {
AstKeyMap * thismap = NULL;
AstKeyMap * grpindices = NULL;
const char * tempstr = NULL;
int thistlen = 0;
size_t nsubarrays = 0;
/* Get the keymap entry for this slot */
astMapGet0A( grouped, astMapKey(grouped, i), &thismap );
/* Get info for length limits */
astMapGet0I( thismap, "NTSLICE", &thistlen );
piecelen[i] = thistlen;
if (isFFT) {
/* Never concatenate FFT data */
thismap = astAnnul(thismap);
chunk[i] = i;
chunklen[i] = thistlen;
continue;
}
/* Get indices information and retrieve the sub-instrument names
in sort order to concatenate for comparison. We only store in
a continuous chunk if we have the same subarrays for the whole
chunk. */
astMapGet0A( thismap, "GRPINDICES", &grpindices );
nsubarrays = astMapSize( grpindices );
(current.related)[0] = '\0';
for (j = 0; j < nsubarrays; j++ ) {
one_strlcat( current.related, astMapKey(grpindices, j), sizeof(current.related), status );
}
grpindices = astAnnul( grpindices );
/* Fill in the current struct */
astMapGet0I( thismap, "SEQCOUNT", &(current.seqcount) );
astMapGet0I( thismap, "NSUBSCAN", &(current.nsubscan) );
astMapGet0C( thismap, "OBSID", &tempstr );
one_strlcpy( current.obsid, tempstr, sizeof(current.obsid), status );
/* First chunk is special, else compare */
if (i == 0) {
totlen = thistlen;
} else {
if ( ( current.seqcount == previous.seqcount ) &&
( current.nsubscan - previous.nsubscan == 1 ) &&
( strcmp( current.obsid, previous.obsid ) == 0 ) &&
( strcmp( current.related, previous.related ) == 0 ) ) {
/* continuous - check length */
totlen += thistlen;
if ( maxlen && totlen > maxlen ) {
thischunk++;
totlen = thistlen; /* reset length */
} else {
/* Continuous */
}
} else {
/* discontinuity */
thischunk++;
totlen = thistlen; /* Update length of current chunk */
}
}
chunklen[thischunk] = totlen;
chunk[i] = thischunk;
memcpy( &previous, ¤t, sizeof(current) );
thismap = astAnnul( thismap );
}
}
/* Decide if we are keeping a chunk by looking at the length. */
maxconcat = 0;
nkeep = 0;
keepchunk = astMalloc( ngroups*sizeof(*keepchunk) );
for (i=0; i<ngroups; i++) {
size_t thischunk;
thischunk = chunk[i];
if ( chunklen[thischunk] < SMF__MINCHUNKSAMP ) {
/* Warning message */
msgSeti("LEN",chunklen[thischunk]);
msgSeti("MIN",SMF__MINCHUNKSAMP);
msgOut( " ", "SMF_GRP_RELATED: ignoring short chunk (^LEN<^MIN)",
status);
keepchunk[i] = 0;
} else {
keepchunk[i] = 1;
if (maxconcat < chunklen[thischunk]) maxconcat = chunklen[thischunk];
nkeep++;
}
}
/* If no useful chunks generate an error */
if( (*status==SAI__OK) && (!nkeep) ) {
*status = SAI__ERROR;
errRep( "", FUNC_NAME ": No useful chunks.", status );
goto CLEANUP;
}
/* Allocate a subgroup array of the right size and fill it. They keymap
is sorted by date (and wavelength) so we can always index into it by using
indices from the subgroup. */
subgroups = astCalloc( nkeep, sizeof(*subgroups) );
new_chunk = astCalloc( nkeep, sizeof(*new_chunk) );
new_tlen = astCalloc( nkeep, sizeof(*new_tlen) );
currentindex = 0;
for (i=0;i<ngroups;i++) {
AstKeyMap * thismap = NULL;
AstKeyMap * grpindices = NULL;
size_t nsubarrays = 0;
size_t *indices = astCalloc( maxrelated, sizeof(*indices) );
/* skip if we are dropping this chunk */
if (!keepchunk[i]) continue;
/* Get the keymap entry for this slot */
astMapGet0A( grouped, astMapKey(grouped, i), &thismap );
/* Get the indices keymap */
astMapGet0A( thismap, "GRPINDICES", &grpindices );
nsubarrays = astMapSize( grpindices );
for (j=0; j<nsubarrays; j++) {
int myindex;
astMapGet0I( grpindices, astMapKey(grpindices, j), &myindex );
indices[j] = myindex;
}
grpindices = astAnnul( grpindices );
thismap = astAnnul( thismap );
subgroups[currentindex] = indices;
new_chunk[currentindex] = chunk[i];
new_tlen[currentindex] = piecelen[i];
currentindex++;
}
/* Create the smfGroup */
*group = smf_construct_smfGroup( igrp, subgroups, new_chunk, new_tlen,
nkeep, maxrelated, 0, status );
/* Return maxfilelen if requested */
if( maxfilelen ) {
*maxfilelen = maxflen;
}
/* Return maxconcatlen if requested */
if( maxconcatlen ) {
*maxconcatlen = maxconcat;
}
/* Create a base group for output files if required */
/* Create a base group of filenames */
if (*status == SAI__OK && basegrp ) {
*basegrp = smf_grp_new( (*group)->grp, "Base Group", status );
/* Loop over time chunks */
for( i=0; (*status==SAI__OK)&&(i<(*group)->ngroups); i++ ) {
size_t idx;
/* Check for new continuous chunk */
if( i==0 || ( (*group)->chunk[i] != (*group)->chunk[i-1]) ) {
/* Loop over subarray */
for( idx=0; idx<(*group)->nrelated; idx++ ) {
size_t grpindex = (*group)->subgroups[i][idx];
if ( grpindex > 0 ) {
ndgCpsup( (*group)->grp, grpindex, *basegrp, status );
}
}
}
}
}
CLEANUP:
keepchunk = astFree( keepchunk );
chunk = astFree( chunk );
chunklen = astFree( chunklen );
piecelen = astFree( piecelen );
grouped = astAnnul( grouped );
if( *status != SAI__OK ) {
/* free the group */
if (basegrp && *basegrp) grpDelet( basegrp, status );
if (group && *group) {
smf_close_smfGroup( group, status );
} else {
/* have to clean up manually */
new_chunk = astFree( new_chunk );
new_tlen = astFree( new_tlen );
if( subgroups ) {
size_t isub;
for( isub=0; isub<nkeep; isub++ ) {
subgroups[isub] = astFree( subgroups[isub] );
}
subgroups = astFree( subgroups );
}
}
}
/* Return the maximum padding if required. */
if( pad ) *pad = maxpad;
}
