static int patch_cs4210(struct hda_codec *codec)
{
struct cs_spec *spec;
int err;
spec = cs_alloc_spec(codec, CS4210_VENDOR_NID);
if (!spec)
return -ENOMEM;
codec->patch_ops = cs421x_patch_ops;
spec->gen.automute_hook = cs_automute;
snd_hda_pick_fixup(codec, cs421x_models, cs421x_fixup_tbl,
cs421x_fixups);
snd_hda_apply_fixup(codec, HDA_FIXUP_ACT_PRE_PROBE);
/*
Update the GPIO/DMIC/SENSE_B pinmux before the configuration
is auto-parsed. If GPIO or SENSE_B is forced, DMIC input
is disabled.
*/
cs4210_pinmux_init(codec);
err = cs421x_parse_auto_config(codec);
if (err < 0)
goto error;
snd_hda_apply_fixup(codec, HDA_FIXUP_ACT_PROBE);
return 0;
error:
cs_free(codec);
return err;
}
static int patch_cs420x(struct hda_codec *codec)
{
struct cs_spec *spec;
int err;
spec = cs_alloc_spec(codec, CS420X_VENDOR_NID);
if (!spec)
return -ENOMEM;
codec->patch_ops = cs_patch_ops;
spec->gen.automute_hook = cs_automute;
codec->single_adc_amp = 1;
snd_hda_pick_fixup(codec, cs420x_models, cs420x_fixup_tbl,
cs420x_fixups);
snd_hda_apply_fixup(codec, HDA_FIXUP_ACT_PRE_PROBE);
err = cs_parse_auto_config(codec);
if (err < 0)
goto error;
snd_hda_apply_fixup(codec, HDA_FIXUP_ACT_PROBE);
return 0;
error:
cs_free(codec);
return err;
}
static int patch_ad1981(struct hda_codec *codec)
{
struct ad198x_spec *spec;
int err;
err = alloc_ad_spec(codec);
if (err < 0)
return -ENOMEM;
spec = codec->spec;
spec->gen.mixer_nid = 0x0e;
spec->gen.beep_nid = 0x10;
set_beep_amp(spec, 0x0d, 0, HDA_OUTPUT);
snd_hda_pick_fixup(codec, NULL, ad1981_fixup_tbl, ad1981_fixups);
snd_hda_apply_fixup(codec, HDA_FIXUP_ACT_PRE_PROBE);
err = ad198x_parse_auto_config(codec, false);
if (err < 0)
goto error;
err = ad1983_add_spdif_mux_ctl(codec);
if (err < 0)
goto error;
snd_hda_apply_fixup(codec, HDA_FIXUP_ACT_PROBE);
return 0;
error:
snd_hda_gen_free(codec);
return err;
}
static int patch_ad1986a(struct hda_codec *codec)
{
int err;
struct ad198x_spec *spec;
static hda_nid_t preferred_pairs[] = {
0x1a, 0x03,
0x1b, 0x03,
0x1c, 0x04,
0x1d, 0x05,
0x1e, 0x03,
0
};
err = alloc_ad_spec(codec);
if (err < 0)
return err;
spec = codec->spec;
/* AD1986A has the inverted EAPD implementation */
codec->inv_eapd = 1;
spec->gen.mixer_nid = 0x07;
spec->gen.beep_nid = 0x19;
set_beep_amp(spec, 0x18, 0, HDA_OUTPUT);
/* AD1986A has a hardware problem that it can't share a stream
* with multiple output pins. The copy of front to surrounds
* causes noisy or silent outputs at a certain timing, e.g.
* changing the volume.
* So, let's disable the shared stream.
*/
spec->gen.multiout.no_share_stream = 1;
/* give fixed DAC/pin pairs */
spec->gen.preferred_dacs = preferred_pairs;
/* AD1986A can't manage the dynamic pin on/off smoothly */
spec->gen.auto_mute_via_amp = 1;
snd_hda_pick_fixup(codec, ad1986a_fixup_models, ad1986a_fixup_tbl,
ad1986a_fixups);
snd_hda_apply_fixup(codec, HDA_FIXUP_ACT_PRE_PROBE);
err = ad198x_parse_auto_config(codec, false);
if (err < 0) {
snd_hda_gen_free(codec);
return err;
}
snd_hda_apply_fixup(codec, HDA_FIXUP_ACT_PROBE);
return 0;
}
static int cs_build_controls(struct hda_codec *codec)
{
int err;
err = snd_hda_gen_build_controls(codec);
if (err < 0)
return err;
snd_hda_apply_fixup(codec, HDA_FIXUP_ACT_BUILD);
return 0;
}
/* remap the fixup from codec SSID and apply it */
static void cs4208_fixup_mac(struct hda_codec *codec,
const struct hda_fixup *fix, int action)
{
if (action != HDA_FIXUP_ACT_PRE_PROBE)
return;
snd_hda_pick_fixup(codec, NULL, cs4208_mac_fixup_tbl, cs4208_fixups);
if (codec->fixup_id < 0 || codec->fixup_id == CS4208_MAC_AUTO)
codec->fixup_id = CS4208_GPIO0; /* default fixup */
snd_hda_apply_fixup(codec, action);
}
static int cx_auto_init(struct hda_codec *codec)
{
struct conexant_spec *spec = codec->spec;
snd_hda_gen_init(codec);
if (!spec->dynamic_eapd)
cx_auto_turn_eapd(codec, spec->num_eapds, spec->eapds, true);
snd_hda_apply_fixup(codec, HDA_FIXUP_ACT_INIT);
return 0;
}
static int patch_cs4208(struct hda_codec *codec)
{
struct cs_spec *spec;
int err;
spec = cs_alloc_spec(codec, CS4208_VENDOR_NID);
if (!spec)
return -ENOMEM;
spec->gen.automute_hook = cs_automute;
/* exclude NID 0x10 (HP) from output volumes due to different steps */
spec->gen.out_vol_mask = 1ULL << 0x10;
snd_hda_pick_fixup(codec, cs4208_models, cs4208_fixup_tbl,
cs4208_fixups);
snd_hda_apply_fixup(codec, HDA_FIXUP_ACT_PRE_PROBE);
snd_hda_override_wcaps(codec, 0x18,
get_wcaps(codec, 0x18) | AC_WCAP_STEREO);
cs4208_fix_amp_caps(codec, 0x18);
cs4208_fix_amp_caps(codec, 0x1b);
cs4208_fix_amp_caps(codec, 0x1c);
err = cs_parse_auto_config(codec);
if (err < 0)
goto error;
codec->patch_ops = cs_patch_ops;
snd_hda_apply_fixup(codec, HDA_FIXUP_ACT_PROBE);
return 0;
error:
cs_free(codec);
return err;
}
static int patch_conexant_auto(struct hda_codec *codec)
{
struct conexant_spec *spec;
int err;
codec_info(codec, "%s: BIOS auto-probing.\n", codec->core.chip_name);
spec = kzalloc(sizeof(*spec), GFP_KERNEL);
if (!spec)
return -ENOMEM;
snd_hda_gen_spec_init(&spec->gen);
codec->spec = spec;
codec->patch_ops = cx_auto_patch_ops;
cx_auto_parse_beep(codec);
cx_auto_parse_eapd(codec);
spec->gen.own_eapd_ctl = 1;
if (spec->dynamic_eapd)
spec->gen.vmaster_mute.hook = cx_auto_vmaster_hook;
switch (codec->core.vendor_id) {
case 0x14f15045:
codec->single_adc_amp = 1;
spec->gen.mixer_nid = 0x17;
spec->gen.add_stereo_mix_input = HDA_HINT_STEREO_MIX_AUTO;
snd_hda_pick_fixup(codec, cxt5045_fixup_models,
cxt5045_fixups, cxt_fixups);
break;
case 0x14f15047:
codec->pin_amp_workaround = 1;
spec->gen.mixer_nid = 0x19;
spec->gen.add_stereo_mix_input = HDA_HINT_STEREO_MIX_AUTO;
snd_hda_pick_fixup(codec, cxt5047_fixup_models,
cxt5047_fixups, cxt_fixups);
break;
case 0x14f15051:
add_cx5051_fake_mutes(codec);
codec->pin_amp_workaround = 1;
snd_hda_pick_fixup(codec, cxt5051_fixup_models,
cxt5051_fixups, cxt_fixups);
break;
default:
codec->pin_amp_workaround = 1;
snd_hda_pick_fixup(codec, cxt5066_fixup_models,
cxt5066_fixups, cxt_fixups);
break;
}
/* Show mute-led control only on HP laptops
* This is a sort of white-list: on HP laptops, EAPD corresponds
* only to the mute-LED without actualy amp function. Meanwhile,
* others may use EAPD really as an amp switch, so it might be
* not good to expose it blindly.
*/
switch (codec->core.subsystem_id >> 16) {
case 0x103c:
spec->gen.vmaster_mute_enum = 1;
break;
}
snd_hda_apply_fixup(codec, HDA_FIXUP_ACT_PRE_PROBE);
err = snd_hda_parse_pin_defcfg(codec, &spec->gen.autocfg, NULL,
spec->parse_flags);
if (err < 0)
goto error;
err = snd_hda_gen_parse_auto_config(codec, &spec->gen.autocfg);
if (err < 0)
goto error;
/* Some laptops with Conexant chips show stalls in S3 resume,
* which falls into the single-cmd mode.
* Better to make reset, then.
*/
if (!codec->bus->core.sync_write) {
codec_info(codec,
"Enable sync_write for stable communication\n");
codec->bus->core.sync_write = 1;
codec->bus->allow_bus_reset = 1;
}
snd_hda_apply_fixup(codec, HDA_FIXUP_ACT_PROBE);
return 0;
error:
cx_auto_free(codec);
return err;
}
