/*
** This routine does the work of opening a database on behalf of
** sqlite3_open() and sqlite3_open16(). The database filename "zFilename"
** is UTF-8 encoded.
*/
static int openDatabase(
const char *zFilename, /* Database filename UTF-8 encoded */
sqlite3 **ppDb /* OUT: Returned database handle */
){
sqlite3 *db;
int rc, i;
/* Allocate the sqlite data structure */
db = sqliteMalloc( sizeof(sqlite3) );
if( db==0 ) goto opendb_out;
db->priorNewRowid = 0;
db->magic = SQLITE_MAGIC_BUSY;
db->nDb = 2;
db->aDb = db->aDbStatic;
db->enc = SQLITE_UTF8;
db->autoCommit = 1;
db->flags |= SQLITE_ShortColNames;
sqlite3HashInit(&db->aFunc, SQLITE_HASH_STRING, 0);
sqlite3HashInit(&db->aCollSeq, SQLITE_HASH_STRING, 0);
for(i=0; i<db->nDb; i++){
sqlite3HashInit(&db->aDb[i].tblHash, SQLITE_HASH_STRING, 0);
sqlite3HashInit(&db->aDb[i].idxHash, SQLITE_HASH_STRING, 0);
sqlite3HashInit(&db->aDb[i].trigHash, SQLITE_HASH_STRING, 0);
sqlite3HashInit(&db->aDb[i].aFKey, SQLITE_HASH_STRING, 1);
}
/* Add the default collation sequence BINARY. BINARY works for both UTF-8
** and UTF-16, so add a version for each to avoid any unnecessary
** conversions. The only error that can occur here is a malloc() failure.
*/
if( sqlite3_create_collation(db, "BINARY", SQLITE_UTF8, 0,binCollFunc) ||
sqlite3_create_collation(db, "BINARY", SQLITE_UTF16, 0,binCollFunc) ||
!(db->pDfltColl = sqlite3FindCollSeq(db, db->enc, "BINARY", 6, 0)) ){
rc = db->errCode;
assert( rc!=SQLITE_OK );
db->magic = SQLITE_MAGIC_CLOSED;
goto opendb_out;
}
/* Also add a UTF-8 case-insensitive collation sequence. */
sqlite3_create_collation(db, "NOCASE", SQLITE_UTF8, 0, nocaseCollatingFunc);
/* Open the backend database driver */
rc = sqlite3BtreeFactory(db, zFilename, 0, MAX_PAGES, &db->aDb[0].pBt);
if( rc!=SQLITE_OK ){
sqlite3Error(db, rc, 0);
db->magic = SQLITE_MAGIC_CLOSED;
goto opendb_out;
}
/* The default safety_level for the main database is 'full'; for the temp
** database it is 'NONE'. This matches the pager layer defaults.
*/
db->aDb[0].zName = "main";
db->aDb[0].safety_level = 3;
#ifndef SQLITE_OMIT_TEMPDB
db->aDb[1].zName = "temp";
db->aDb[1].safety_level = 1;
#endif
/* Register all built-in functions, but do not attempt to read the
** database schema yet. This is delayed until the first time the database
** is accessed.
*/
sqlite3RegisterBuiltinFunctions(db);
sqlite3Error(db, SQLITE_OK, 0);
db->magic = SQLITE_MAGIC_OPEN;
opendb_out:
if( sqlite3_errcode(db)==SQLITE_OK && sqlite3_malloc_failed ){
sqlite3Error(db, SQLITE_NOMEM, 0);
}
*ppDb = db;
#ifndef SQLITE_OMIT_GLOBALRECOVER
if( db ){
sqlite3OsEnterMutex();
db->pNext = pDbList;
pDbList = db;
sqlite3OsLeaveMutex();
}
#endif
return sqlite3_errcode(db);
}
/*
** An SQL user-function registered to do the work of an ATTACH statement. The
** three arguments to the function come directly from an attach statement:
**
** ATTACH DATABASE x AS y KEY z
**
** SELECT sqlite_attach(x, y, z)
**
** If the optional "KEY z" syntax is omitted, an SQL NULL is passed as the
** third argument.
*/
static void attachFunc(
sqlite3_context *context,
int NotUsed,
sqlite3_value **argv
){
int i;
int rc = 0;
sqlite3 *db = sqlite3_context_db_handle(context);
const char *zName;
const char *zFile;
Db *aNew;
char *zErrDyn = 0;
UNUSED_PARAMETER(NotUsed);
zFile = (const char *)sqlite3_value_text(argv[0]);
zName = (const char *)sqlite3_value_text(argv[1]);
if( zFile==0 ) zFile = "";
if( zName==0 ) zName = "";
/* Check for the following errors:
**
** * Too many attached databases,
** * Transaction currently open
** * Specified database name already being used.
*/
if( db->nDb>=db->aLimit[SQLITE_LIMIT_ATTACHED]+2 ){
zErrDyn = sqlite3MPrintf(db, "too many attached databases - max %d",
db->aLimit[SQLITE_LIMIT_ATTACHED]
);
goto attach_error;
}
if( !db->autoCommit ){
zErrDyn = sqlite3MPrintf(db, "cannot ATTACH database within transaction");
goto attach_error;
}
for(i=0; i<db->nDb; i++){
char *z = db->aDb[i].zName;
assert( z && zName );
if( sqlite3StrICmp(z, zName)==0 ){
zErrDyn = sqlite3MPrintf(db, "database %s is already in use", zName);
goto attach_error;
}
}
/* Allocate the new entry in the db->aDb[] array and initialise the schema
** hash tables.
*/
if( db->aDb==db->aDbStatic ){
aNew = sqlite3DbMallocRaw(db, sizeof(db->aDb[0])*3 );
if( aNew==0 ) return;
memcpy(aNew, db->aDb, sizeof(db->aDb[0])*2);
}else{
aNew = sqlite3DbRealloc(db, db->aDb, sizeof(db->aDb[0])*(db->nDb+1) );
if( aNew==0 ) return;
}
db->aDb = aNew;
aNew = &db->aDb[db->nDb];
memset(aNew, 0, sizeof(*aNew));
/* Open the database file. If the btree is successfully opened, use
** it to obtain the database schema. At this point the schema may
** or may not be initialised.
*/
rc = sqlite3BtreeFactory(db, zFile, 0, SQLITE_DEFAULT_CACHE_SIZE,
db->openFlags | SQLITE_OPEN_MAIN_DB,
&aNew->pBt);
db->nDb++;
if( rc==SQLITE_CONSTRAINT ){
rc = SQLITE_ERROR;
zErrDyn = sqlite3MPrintf(db, "database is already attached");
}else if( rc==SQLITE_OK ){
Pager *pPager;
aNew->pSchema = sqlite3SchemaGet(db, aNew->pBt);
if( !aNew->pSchema ){
rc = SQLITE_NOMEM;
}else if( aNew->pSchema->file_format && aNew->pSchema->enc!=ENC(db) ){
zErrDyn = sqlite3MPrintf(db,
"attached databases must use the same text encoding as main database");
rc = SQLITE_ERROR;
}
pPager = sqlite3BtreePager(aNew->pBt);
sqlite3PagerLockingMode(pPager, db->dfltLockMode);
sqlite3PagerJournalMode(pPager, db->dfltJournalMode);
}
aNew->zName = sqlite3DbStrDup(db, zName);
aNew->safety_level = 3;
#if SQLITE_HAS_CODEC
{
extern int sqlite3CodecAttach(sqlite3*, int, const void*, int);
extern void sqlite3CodecGetKey(sqlite3*, int, void**, int*);
int nKey;
char *zKey;
int t = sqlite3_value_type(argv[2]);
switch( t ){
case SQLITE_INTEGER:
case SQLITE_FLOAT:
zErrDyn = sqlite3DbStrDup(db, "Invalid key value");
rc = SQLITE_ERROR;
break;
case SQLITE_TEXT:
case SQLITE_BLOB:
nKey = sqlite3_value_bytes(argv[2]);
zKey = (char *)sqlite3_value_blob(argv[2]);
sqlite3CodecAttach(db, db->nDb-1, zKey, nKey);
break;
case SQLITE_NULL:
/* No key specified. Use the key from the main database */
sqlite3CodecGetKey(db, 0, (void**)&zKey, &nKey);
sqlite3CodecAttach(db, db->nDb-1, zKey, nKey);
break;
}
}
#endif
/* If the file was opened successfully, read the schema for the new database.
** If this fails, or if opening the file failed, then close the file and
** remove the entry from the db->aDb[] array. i.e. put everything back the way
** we found it.
*/
if( rc==SQLITE_OK ){
(void)sqlite3SafetyOn(db);
sqlite3BtreeEnterAll(db);
rc = sqlite3Init(db, &zErrDyn);
sqlite3BtreeLeaveAll(db);
(void)sqlite3SafetyOff(db);
}
if( rc ){
int iDb = db->nDb - 1;
assert( iDb>=2 );
if( db->aDb[iDb].pBt ){
sqlite3BtreeClose(db->aDb[iDb].pBt);
db->aDb[iDb].pBt = 0;
db->aDb[iDb].pSchema = 0;
}
sqlite3ResetInternalSchema(db, 0);
db->nDb = iDb;
if( rc==SQLITE_NOMEM || rc==SQLITE_IOERR_NOMEM ){
db->mallocFailed = 1;
sqlite3DbFree(db, zErrDyn);
zErrDyn = sqlite3MPrintf(db, "out of memory");
}else if( zErrDyn==0 ){
zErrDyn = sqlite3MPrintf(db, "unable to open database: %s", zFile);
}
goto attach_error;
}
return;
attach_error:
/* Return an error if we get here */
if( zErrDyn ){
sqlite3_result_error(context, zErrDyn, -1);
sqlite3DbFree(db, zErrDyn);
}
if( rc ) sqlite3_result_error_code(context, rc);
}
/*
** An SQL user-function registered to do the work of an ATTACH statement. The
** three arguments to the function come directly from an attach statement:
**
** ATTACH DATABASE x AS y KEY z
**
** SELECT sqlite_attach(x, y, z)
**
** If the optional "KEY z" syntax is omitted, an SQL NULL is passed as the
** third argument.
*/
static void attachFunc(
sqlite3_context *context,
int argc,
sqlite3_value **argv
){
int i;
int rc = 0;
sqlite3 *db = sqlite3_user_data(context);
const char *zName;
const char *zFile;
Db *aNew;
char zErr[128];
char *zErrDyn = 0;
zFile = (const char *)sqlite3_value_text(argv[0]);
zName = (const char *)sqlite3_value_text(argv[1]);
/* Check for the following errors:
**
** * Too many attached databases,
** * Transaction currently open
** * Specified database name already being used.
*/
if( db->nDb>=MAX_ATTACHED+2 ){
sqlite3_snprintf(
127, zErr, "too many attached databases - max %d", MAX_ATTACHED
);
goto attach_error;
}
if( !db->autoCommit ){
strcpy(zErr, "cannot ATTACH database within transaction");
goto attach_error;
}
for(i=0; i<db->nDb; i++){
char *z = db->aDb[i].zName;
if( z && sqlite3StrICmp(z, zName)==0 ){
sqlite3_snprintf(127, zErr, "database %s is already in use", zName);
goto attach_error;
}
}
/* Allocate the new entry in the db->aDb[] array and initialise the schema
** hash tables.
*/
if( db->aDb==db->aDbStatic ){
aNew = sqliteMalloc( sizeof(db->aDb[0])*3 );
if( aNew==0 ){
return;
}
memcpy(aNew, db->aDb, sizeof(db->aDb[0])*2);
}else{
aNew = sqliteRealloc(db->aDb, sizeof(db->aDb[0])*(db->nDb+1) );
if( aNew==0 ){
return;
}
}
db->aDb = aNew;
aNew = &db->aDb[db->nDb++];
memset(aNew, 0, sizeof(*aNew));
/* Open the database file. If the btree is successfully opened, use
** it to obtain the database schema. At this point the schema may
** or may not be initialised.
*/
rc = sqlite3BtreeFactory(db, zFile, 0, MAX_PAGES, &aNew->pBt);
if( rc==SQLITE_OK ){
aNew->pSchema = sqlite3SchemaGet(aNew->pBt);
if( !aNew->pSchema ){
rc = SQLITE_NOMEM;
}else if( aNew->pSchema->file_format && aNew->pSchema->enc!=ENC(db) ){
strcpy(zErr,
"attached databases must use the same text encoding as main database");
goto attach_error;
}
}
aNew->zName = sqliteStrDup(zName);
aNew->safety_level = 3;
#if SQLITE_HAS_CODEC
{
extern int sqlite3CodecAttach(sqlite3*, int, void*, int);
extern void sqlite3CodecGetKey(sqlite3*, int, void**, int*);
int nKey;
char *zKey;
int t = sqlite3_value_type(argv[2]);
switch( t ){
case SQLITE_INTEGER:
case SQLITE_FLOAT:
zErrDyn = sqliteStrDup("Invalid key value");
rc = SQLITE_ERROR;
break;
case SQLITE_TEXT:
case SQLITE_BLOB:
nKey = sqlite3_value_bytes(argv[2]);
zKey = (char *)sqlite3_value_blob(argv[2]);
sqlite3CodecAttach(db, db->nDb-1, zKey, nKey);
break;
case SQLITE_NULL:
/* No key specified. Use the key from the main database */
sqlite3CodecGetKey(db, 0, (void**)&zKey, &nKey);
sqlite3CodecAttach(db, db->nDb-1, zKey, nKey);
break;
}
}
#endif
/* If the file was opened successfully, read the schema for the new database.
** If this fails, or if opening the file failed, then close the file and
** remove the entry from the db->aDb[] array. i.e. put everything back the way
** we found it.
*/
if( rc==SQLITE_OK ){
sqlite3SafetyOn(db);
rc = sqlite3Init(db, &zErrDyn);
sqlite3SafetyOff(db);
}
if( rc ){
int i = db->nDb - 1;
assert( i>=2 );
if( db->aDb[i].pBt ){
sqlite3BtreeClose(db->aDb[i].pBt);
db->aDb[i].pBt = 0;
db->aDb[i].pSchema = 0;
}
sqlite3ResetInternalSchema(db, 0);
db->nDb = i;
sqlite3_snprintf(127, zErr, "unable to open database: %s", zFile);
goto attach_error;
}
return;
attach_error:
/* Return an error if we get here */
if( zErrDyn ){
sqlite3_result_error(context, zErrDyn, -1);
sqliteFree(zErrDyn);
}else{
zErr[sizeof(zErr)-1] = 0;
sqlite3_result_error(context, zErr, -1);
}
}
/*
** Reset an Agg structure. Delete all its contents.
**
** For installable aggregate functions, if the step function has been
** called, make sure the finalizer function has also been called. The
** finalizer might need to free memory that was allocated as part of its
** private context. If the finalizer has not been called yet, call it
** now.
**
** If db is NULL, then this is being called from sqliteVdbeReset(). In
** this case clean up all references to the temp-table used for
** aggregates (if it was ever opened).
**
** If db is not NULL, then this is being called from with an OP_AggReset
** opcode. Open the temp-table, if it has not already been opened and
** delete the contents of the table used for aggregate information, ready
** for the next round of aggregate processing.
*/
int sqlite3VdbeAggReset(sqlite3 *db, Agg *pAgg, KeyInfo *pKeyInfo){
int rc = 0;
BtCursor *pCsr = pAgg->pCsr;
assert( (pCsr && pAgg->nTab>0) || (!pCsr && pAgg->nTab==0)
|| sqlite3_malloc_failed );
/* If pCsr is not NULL, then the table used for aggregate information
** is open. Loop through it and free the AggElem* structure pointed at
** by each entry. If the finalizer has not been called for an AggElem,
** do that too. Finally, clear the btree table itself.
*/
if( pCsr ){
int res;
assert( pAgg->pBtree );
assert( pAgg->nTab>0 );
rc=sqlite3BtreeFirst(pCsr, &res);
while( res==0 && rc==SQLITE_OK ){
AggElem *pElem;
rc = sqlite3BtreeData(pCsr, 0, sizeof(AggElem*), (char *)&pElem);
if( res!=SQLITE_OK ){
return rc;
}
assert( pAgg->apFunc!=0 );
freeAggElem(pElem, pAgg);
rc=sqlite3BtreeNext(pCsr, &res);
}
if( rc!=SQLITE_OK ){
return rc;
}
sqlite3BtreeCloseCursor(pCsr);
sqlite3BtreeClearTable(pAgg->pBtree, pAgg->nTab);
}else{
/* The cursor may not be open because the aggregator was never used,
** or it could be that it was used but there was no GROUP BY clause.
*/
if( pAgg->pCurrent ){
freeAggElem(pAgg->pCurrent, pAgg);
}
}
/* If db is not NULL and we have not yet and we have not yet opened
** the temporary btree then do so and create the table to store aggregate
** information.
**
** If db is NULL, then close the temporary btree if it is open.
*/
if( db ){
if( !pAgg->pBtree ){
assert( pAgg->nTab==0 );
rc = sqlite3BtreeFactory(db, ":memory:", 0, TEMP_PAGES, &pAgg->pBtree);
if( rc!=SQLITE_OK ) return rc;
sqlite3BtreeBeginTrans(pAgg->pBtree, 1);
rc = sqlite3BtreeCreateTable(pAgg->pBtree, &pAgg->nTab, 0);
if( rc!=SQLITE_OK ) return rc;
}
assert( pAgg->nTab!=0 );
rc = sqlite3BtreeCursor(pAgg->pBtree, pAgg->nTab, 1,
sqlite3VdbeRecordCompare, pKeyInfo, &pAgg->pCsr);
if( rc!=SQLITE_OK ) return rc;
}else{
if( pAgg->pBtree ){
sqlite3BtreeClose(pAgg->pBtree);
pAgg->pBtree = 0;
pAgg->nTab = 0;
}
pAgg->pCsr = 0;
}
if( pAgg->apFunc ){
sqliteFree(pAgg->apFunc);
pAgg->apFunc = 0;
}
pAgg->pCurrent = 0;
pAgg->nMem = 0;
pAgg->searching = 0;
return SQLITE_OK;
}
/*
** This routine is called by the parser to process an ATTACH statement:
**
** ATTACH DATABASE filename AS dbname
**
** The pFilename and pDbname arguments are the tokens that define the
** filename and dbname in the ATTACH statement.
*/
void sqlite3Attach(
Parse *pParse, /* The parser context */
Token *pFilename, /* Name of database file */
Token *pDbname, /* Name of the database to use internally */
int keyType, /* 0: no key. 1: TEXT, 2: BLOB */
Token *pKey /* Text of the key for keytype 1 and 2 */
){
Db *aNew;
int rc, i;
char *zFile, *zName;
sqlite3 *db;
Vdbe *v;
v = sqlite3GetVdbe(pParse);
if( !v ) return;
sqlite3VdbeAddOp(v, OP_Halt, 0, 0);
if( pParse->explain ) return;
db = pParse->db;
if( db->nDb>=MAX_ATTACHED+2 ){
sqlite3ErrorMsg(pParse, "too many attached databases - max %d",
MAX_ATTACHED);
pParse->rc = SQLITE_ERROR;
return;
}
if( !db->autoCommit ){
sqlite3ErrorMsg(pParse, "cannot ATTACH database within transaction");
pParse->rc = SQLITE_ERROR;
return;
}
zFile = sqlite3NameFromToken(pFilename);;
if( zFile==0 ) return;
#ifndef SQLITE_OMIT_AUTHORIZATION
if( sqlite3AuthCheck(pParse, SQLITE_ATTACH, zFile, 0, 0)!=SQLITE_OK ){
sqliteFree(zFile);
return;
}
#endif /* SQLITE_OMIT_AUTHORIZATION */
zName = sqlite3NameFromToken(pDbname);
if( zName==0 ) return;
for(i=0; i<db->nDb; i++){
char *z = db->aDb[i].zName;
if( z && sqlite3StrICmp(z, zName)==0 ){
sqlite3ErrorMsg(pParse, "database %z is already in use", zName);
pParse->rc = SQLITE_ERROR;
sqliteFree(zFile);
return;
}
}
if( db->aDb==db->aDbStatic ){
aNew = sqliteMalloc( sizeof(db->aDb[0])*3 );
if( aNew==0 ) return;
memcpy(aNew, db->aDb, sizeof(db->aDb[0])*2);
}else{
aNew = sqliteRealloc(db->aDb, sizeof(db->aDb[0])*(db->nDb+1) );
if( aNew==0 ) return;
}
db->aDb = aNew;
aNew = &db->aDb[db->nDb++];
memset(aNew, 0, sizeof(*aNew));
sqlite3HashInit(&aNew->tblHash, SQLITE_HASH_STRING, 0);
sqlite3HashInit(&aNew->idxHash, SQLITE_HASH_STRING, 0);
sqlite3HashInit(&aNew->trigHash, SQLITE_HASH_STRING, 0);
sqlite3HashInit(&aNew->aFKey, SQLITE_HASH_STRING, 1);
aNew->zName = zName;
aNew->safety_level = 3;
rc = sqlite3BtreeFactory(db, zFile, 0, MAX_PAGES, &aNew->pBt);
if( rc ){
sqlite3ErrorMsg(pParse, "unable to open database: %s", zFile);
}
#if SQLITE_HAS_CODEC
{
extern int sqlite3CodecAttach(sqlite3*, int, void*, int);
char *zKey;
int nKey;
if( keyType==0 ){
/* No key specified. Use the key from the main database */
extern void sqlite3CodecGetKey(sqlite3*, int, void**, int*);
sqlite3CodecGetKey(db, 0, (void**)&zKey, &nKey);
}else if( keyType==1 ){
/* Key specified as text */
zKey = sqlite3NameFromToken(pKey);
nKey = strlen(zKey);
}else{
/* Key specified as a BLOB */
char *zTemp;
assert( keyType==2 );
pKey->z++;
pKey->n--;
zTemp = sqlite3NameFromToken(pKey);
zKey = sqlite3HexToBlob(zTemp);
sqliteFree(zTemp);
}
sqlite3CodecAttach(db, db->nDb-1, zKey, nKey);
if( keyType ){
sqliteFree(zKey);
}
}
#endif
sqliteFree(zFile);
db->flags &= ~SQLITE_Initialized;
if( pParse->nErr==0 && rc==SQLITE_OK ){
rc = sqlite3ReadSchema(pParse);
}
if( rc ){
int i = db->nDb - 1;
assert( i>=2 );
if( db->aDb[i].pBt ){
sqlite3BtreeClose(db->aDb[i].pBt);
db->aDb[i].pBt = 0;
}
sqlite3ResetInternalSchema(db, 0);
if( 0==pParse->nErr ){
pParse->nErr++;
pParse->rc = SQLITE_ERROR;
}
}
}
/*
** This routine does the work of opening a database on behalf of
** sqlite3_open() and sqlite3_open16(). The database filename "zFilename"
** is UTF-8 encoded.
*/
static int openDatabase(
const char *zFilename, /* Database filename UTF-8 encoded */
sqlite3 **ppDb /* OUT: Returned database handle */
){
sqlite3 *db;
int rc;
CollSeq *pColl;
assert( !sqlite3MallocFailed() );
/* Allocate the sqlite data structure */
db = sqliteMalloc( sizeof(sqlite3) );
if( db==0 ) goto opendb_out;
db->priorNewRowid = 0;
db->magic = SQLITE_MAGIC_BUSY;
db->nDb = 2;
db->aDb = db->aDbStatic;
db->autoCommit = 1;
db->flags |= SQLITE_ShortColNames;
sqlite3HashInit(&db->aFunc, SQLITE_HASH_STRING, 0);
sqlite3HashInit(&db->aCollSeq, SQLITE_HASH_STRING, 0);
/* Add the default collation sequence BINARY. BINARY works for both UTF-8
** and UTF-16, so add a version for each to avoid any unnecessary
** conversions. The only error that can occur here is a malloc() failure.
*/
if( createCollation(db, "BINARY", SQLITE_UTF8, 0, binCollFunc) ||
createCollation(db, "BINARY", SQLITE_UTF16BE, 0, binCollFunc) ||
createCollation(db, "BINARY", SQLITE_UTF16LE, 0, binCollFunc) ||
(db->pDfltColl = sqlite3FindCollSeq(db, SQLITE_UTF8, "BINARY", 6, 0))==0
){
assert( sqlite3MallocFailed() );
db->magic = SQLITE_MAGIC_CLOSED;
goto opendb_out;
}
/* Also add a UTF-8 case-insensitive collation sequence. */
createCollation(db, "NOCASE", SQLITE_UTF8, 0, nocaseCollatingFunc);
/* Set flags on the built-in collating sequences */
db->pDfltColl->type = SQLITE_COLL_BINARY;
pColl = sqlite3FindCollSeq(db, SQLITE_UTF8, "NOCASE", 6, 0);
if( pColl ){
pColl->type = SQLITE_COLL_NOCASE;
}
/* Open the backend database driver */
rc = sqlite3BtreeFactory(db, zFilename, 0, MAX_PAGES, &db->aDb[0].pBt);
if( rc!=SQLITE_OK ){
sqlite3Error(db, rc, 0);
db->magic = SQLITE_MAGIC_CLOSED;
goto opendb_out;
}
#ifndef SQLITE_OMIT_PARSER
db->aDb[0].pSchema = sqlite3SchemaGet(db->aDb[0].pBt);
db->aDb[1].pSchema = sqlite3SchemaGet(0);
#endif
if( db->aDb[0].pSchema ){
ENC(db) = SQLITE_UTF8;
}
/* The default safety_level for the main database is 'full'; for the temp
** database it is 'NONE'. This matches the pager layer defaults.
*/
db->aDb[0].zName = "main";
db->aDb[0].safety_level = 3;
#ifndef SQLITE_OMIT_TEMPDB
db->aDb[1].zName = "temp";
db->aDb[1].safety_level = 1;
#endif
/* Register all built-in functions, but do not attempt to read the
** database schema yet. This is delayed until the first time the database
** is accessed.
*/
if( !sqlite3MallocFailed() ){
sqlite3RegisterBuiltinFunctions(db);
sqlite3Error(db, SQLITE_OK, 0);
}
db->magic = SQLITE_MAGIC_OPEN;
opendb_out:
if( SQLITE_NOMEM==(rc = sqlite3_errcode(db)) ){
sqlite3_close(db);
db = 0;
}
*ppDb = db;
return sqlite3ApiExit(0, rc);
}
/*
** This routine does the work of opening a database on behalf of
** sqlite3_open() and sqlite3_open16(). The database filename "zFilename"
** is UTF-8 encoded.
*/
static int openDatabase(
const char *zFilename, /* Database filename UTF-8 encoded */
sqlite3 **ppDb, /* OUT: Returned database handle */
unsigned flags, /* Operational flags */
const char *zVfs /* Name of the VFS to use */
){
sqlite3 *db;
int rc;
CollSeq *pColl;
/* Allocate the sqlite data structure */
db = (sqlite3*)sqlite3MallocZero( sizeof(sqlite3) );
if( db==0 ) goto opendb_out;
db->mutex = sqlite3_mutex_alloc(SQLITE_MUTEX_RECURSIVE);
if( db->mutex==0 ){
sqlite3_free(db);
db = 0;
goto opendb_out;
}
sqlite3_mutex_enter(db->mutex);
db->errMask = 0xff;
db->priorNewRowid = 0;
db->nDb = 2;
db->magic = SQLITE_MAGIC_BUSY;
db->aDb = db->aDbStatic;
db->autoCommit = 1;
db->nextAutovac = -1;
db->flags |= SQLITE_ShortColNames
#if SQLITE_DEFAULT_FILE_FORMAT<4
| SQLITE_LegacyFileFmt
#endif
#ifdef SQLITE_ENABLE_LOAD_EXTENSION
| SQLITE_LoadExtension
#endif
;
sqlite3HashInit(&db->aFunc, SQLITE_HASH_STRING, 0);
sqlite3HashInit(&db->aCollSeq, SQLITE_HASH_STRING, 0);
#ifndef SQLITE_OMIT_VIRTUALTABLE
sqlite3HashInit(&db->aModule, SQLITE_HASH_STRING, 0);
#endif
db->pVfs = sqlite3OsDefaultVfs();//sqlite3_vfs_find(zVfs);
if( !db->pVfs ){
rc = SQLITE_ERROR;
db->magic = SQLITE_MAGIC_CLOSED;
sqlite3Error(db, rc, "no such vfs: %s", (zVfs?zVfs:"(null)"));
goto opendb_out;
}
/* Add the default collation sequence BINARY. BINARY works for both UTF-8
** and UTF-16, so add a version for each to avoid any unnecessary
** conversions. The only error that can occur here is a malloc() failure.
*/
if( createCollation(db, "BINARY", SQLITE_UTF8, 0, binCollFunc, 0) ||
createCollation(db, "BINARY", SQLITE_UTF16BE, 0, binCollFunc, 0) ||
createCollation(db, "BINARY", SQLITE_UTF16LE, 0, binCollFunc, 0) ||
(db->pDfltColl = sqlite3FindCollSeq(db, SQLITE_UTF8, "BINARY", 6, 0))==0
){
assert( db->mallocFailed );
db->magic = SQLITE_MAGIC_CLOSED;
goto opendb_out;
}
/* Also add a UTF-8 case-insensitive collation sequence. */
createCollation(db, "NOCASE", SQLITE_UTF8, 0, nocaseCollatingFunc, 0);
/* Set flags on the built-in collating sequences */
db->pDfltColl->type = SQLITE_COLL_BINARY;
pColl = sqlite3FindCollSeq(db, SQLITE_UTF8, "NOCASE", 6, 0);
if( pColl ){
pColl->type = SQLITE_COLL_NOCASE;
}
/* Open the backend database driver */
db->openFlags = flags;
rc = sqlite3BtreeFactory(db, zFilename, 0, SQLITE_DEFAULT_CACHE_SIZE,
flags | SQLITE_OPEN_MAIN_DB,
&db->aDb[0].pBt);
if( rc!=SQLITE_OK ){
sqlite3Error(db, rc, 0);
db->magic = SQLITE_MAGIC_CLOSED;
goto opendb_out;
}
db->aDb[0].pSchema = sqlite3SchemaGet(db, db->aDb[0].pBt);
db->aDb[1].pSchema = sqlite3SchemaGet(db, 0);
/* The default safety_level for the main database is 'full'; for the temp
** database it is 'NONE'. This matches the pager layer defaults.
*/
db->aDb[0].zName = "main";
db->aDb[0].safety_level = 3;
#ifndef SQLITE_OMIT_TEMPDB
db->aDb[1].zName = "temp";
db->aDb[1].safety_level = 1;
#endif
db->magic = SQLITE_MAGIC_OPEN;
if( db->mallocFailed ){
goto opendb_out;
}
/* Register all built-in functions, but do not attempt to read the
** database schema yet. This is delayed until the first time the database
** is accessed.
*/
sqlite3Error(db, SQLITE_OK, 0);
sqlite3RegisterBuiltinFunctions(db);
/* Load automatic extensions - extensions that have been registered
** using the sqlite3_automatic_extension() API.
*/
(void)sqlite3AutoLoadExtensions(db);
if( sqlite3_errcode(db)!=SQLITE_OK ){
goto opendb_out;
}
#ifdef SQLITE_ENABLE_FTS1
if( !db->mallocFailed ){
extern int sqlite3Fts1Init(sqlite3*);
rc = sqlite3Fts1Init(db);
}
#endif
#ifdef SQLITE_ENABLE_FTS2
if( !db->mallocFailed && rc==SQLITE_OK ){
extern int sqlite3Fts2Init(sqlite3*);
rc = sqlite3Fts2Init(db);
}
#endif
#ifdef SQLITE_ENABLE_FTS3
if( !db->mallocFailed && rc==SQLITE_OK ){
extern int sqlite3Fts3Init(sqlite3*);
rc = sqlite3Fts3Init(db);
}
#endif
#ifdef SQLITE_ENABLE_ICU
if( !db->mallocFailed && rc==SQLITE_OK ){
extern int sqlite3IcuInit(sqlite3*);
rc = sqlite3IcuInit(db);
}
#endif
sqlite3Error(db, rc, 0);
/* -DSQLITE_DEFAULT_LOCKING_MODE=1 makes EXCLUSIVE the default locking
** mode. -DSQLITE_DEFAULT_LOCKING_MODE=0 make NORMAL the default locking
** mode. Doing nothing at all also makes NORMAL the default.
*/
#ifdef SQLITE_DEFAULT_LOCKING_MODE
db->dfltLockMode = SQLITE_DEFAULT_LOCKING_MODE;
sqlite3PagerLockingMode(sqlite3BtreePager(db->aDb[0].pBt),
SQLITE_DEFAULT_LOCKING_MODE);
#endif
opendb_out:
if( db && db->mutex ){
sqlite3_mutex_leave(db->mutex);
}
if( SQLITE_NOMEM==(rc = sqlite3_errcode(db)) ){
sqlite3_close(db);
db = 0;
}
*ppDb = db;
return sqlite3ApiExit(0, rc);
}
