u32 ddl_fw_init(struct ddl_buf_addr *dram_base)
{
u8 *dest_addr;
dest_addr = DDL_GET_ALIGNED_VITUAL(*dram_base);
DDL_MSG_LOW("FW Addr / FW Size : %x/%d", (u32)vidc_video_codec_fw,
vidc_video_codec_fw_size);
if (res_trk_check_for_sec_session() && res_trk_is_cp_enabled()) {
if (res_trk_enable_footswitch()) {
pr_err("Failed to enable footswitch");
return false;
}
if (res_trk_enable_iommu_clocks()) {
res_trk_disable_footswitch();
pr_err("Failed to enable iommu clocks\n");
return false;
}
dram_base->pil_cookie = subsystem_get("vidc");
if (res_trk_disable_iommu_clocks())
pr_err("Failed to disable iommu clocks\n");
if (IS_ERR_OR_NULL(dram_base->pil_cookie)) {
res_trk_disable_footswitch();
pr_err("subsystem_get failed\n");
return false;
}
} else {
if (vidc_video_codec_fw_size > dram_base->buffer_size ||
!vidc_video_codec_fw)
return false;
memcpy(dest_addr, vidc_video_codec_fw,
vidc_video_codec_fw_size);
}
return true;
}
static void *msm_rmnet_load_modem(struct net_device *dev)
{
void *pil;
int rc;
struct rmnet_private *p = netdev_priv(dev);
pil = subsystem_get("modem");
if (IS_ERR(pil))
pr_err("[%s] %s: modem load failed\n",
dev->name, __func__);
else if (msm_rmnet_modem_wait) {
rc = wait_for_completion_interruptible_timeout(
&p->complete,
msecs_to_jiffies(msm_rmnet_modem_wait * 1000));
if (!rc)
rc = -ETIMEDOUT;
if (rc < 0) {
pr_err("[%s] %s: wait for rmnet port failed %d\n",
dev->name, __func__, rc);
msm_rmnet_unload_modem(pil);
pil = ERR_PTR(rc);
}
}
return pil;
}
static int dsps_load(void)
{
pr_debug("%s.\n", __func__);
drv->pil = subsystem_get("dsps");
if (IS_ERR(drv->pil)) {
pr_err("%s: fail to load DSPS firmware.\n", __func__);
return -ENODEV;
}
msleep(20);
return 0;
}
static int sns_load_adsp(void)
{
sns_ctl.pil = subsystem_get("adsp");
if (IS_ERR(sns_ctl.pil)) {
pr_err("%s: fail to load ADSP firmware\n", __func__);
return -ENODEV;
}
pr_debug("%s: Q6/ADSP image is loaded\n", __func__);
return 0;
}
static int adsp_loader_probe(struct platform_device *pdev)
{
struct adsp_loader_private *priv;
int rc = 0;
const char *adsp_dt = "qcom,adsp-state";
u32 adsp_state;
rc = of_property_read_u32(pdev->dev.of_node, adsp_dt, &adsp_state);
if (rc) {
dev_err(&pdev->dev,
"%s: ADSP state = %x\n", __func__, adsp_state);
return rc;
}
if (adsp_state == APR_SUBSYS_DOWN) {
priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
platform_set_drvdata(pdev, priv);
priv->pil_h = subsystem_get("adsp");
if (IS_ERR(priv->pil_h)) {
pr_err("%s: pil get adsp failed, error:%d\n",
__func__, rc);
devm_kfree(&pdev->dev, priv);
goto fail;
}
/* Set the state of the ADSP in APR driver */
apr_set_q6_state(APR_SUBSYS_LOADED);
} else if (adsp_state == APR_SUBSYS_LOADED) {
dev_dbg(&pdev->dev,
"%s:MDM9x25 ADSP state = %x\n", __func__, adsp_state);
apr_set_q6_state(APR_SUBSYS_LOADED);
}
/* Query for MMPM API */
pr_info("%s: Q6/ADSP image is loaded\n", __func__);
fail:
return rc;
}
static int smd_tty_port_activate(struct tty_port *tport,
struct tty_struct *tty)
{
int res = 0;
unsigned int n = tty->index;
struct smd_tty_info *info;
const char *peripheral = NULL;
if (n >= MAX_SMD_TTYS || !smd_tty[n].smd)
return -ENODEV;
info = smd_tty + n;
mutex_lock(&smd_tty_lock);
tty->driver_data = info;
peripheral = smd_edge_to_subsystem(smd_tty[n].smd->edge);
if (peripheral) {
info->pil = subsystem_get(peripheral);
if (IS_ERR(info->pil)) {
SMD_TTY_INFO(
"%s failed on smd_tty device :%s subsystem_get failed for %s",
__func__, smd_tty[n].smd->port_name,
peripheral);
/*
* Sleep, inorder to reduce the frequency of
* retry by user-space modules and to avoid
* possible watchdog bite.
*/
msleep((smd_tty[n].open_wait * 1000));
res = PTR_ERR(info->pil);
goto out;
}
/* Wait for the modem SMSM to be inited for the SMD
* Loopback channel to be allocated at the modem. Since
* the wait need to be done atmost once, using msleep
* doesn't degrade the performance.
*/
if (n == LOOPBACK_IDX) {
if (!is_modem_smsm_inited())
msleep(5000);
smsm_change_state(SMSM_APPS_STATE,
0, SMSM_SMD_LOOPBACK);
msleep(100);
}
/*
* Wait for a channel to be allocated so we know
* the modem is ready enough.
*/
if (smd_tty[n].open_wait) {
res = wait_for_completion_interruptible_timeout(
&info->ch_allocated,
msecs_to_jiffies(smd_tty[n].open_wait *
1000));
if (res == 0) {
SMD_TTY_INFO(
"Timed out waiting for SMD channel %s",
smd_tty[n].smd->port_name);
res = -ETIMEDOUT;
goto release_pil;
} else if (res < 0) {
SMD_TTY_INFO(
"Error waiting for SMD channel %s : %d\n",
smd_tty[n].smd->port_name, res);
goto release_pil;
}
#ifdef CONFIG_MSM_SMD_TTY_DS_LEGACY
/*
* on boot, process tried to open smd0 sleeps until
* modem is ready or timeout.
*/
if (n == DS_IDX) {
/* wait for open ready status in seconds */
pr_info("%s: checking DS modem status\n", __func__);
res = wait_event_interruptible_timeout(
info->ch_opened_wait_queue,
info->is_dsmodem_ready,
(smd_tty_ds_modem_wait * HZ));
if (!res) {
res = -ETIMEDOUT;
pr_err("%s: timeout to wait for %s modem: %d\n",
__func__,
smd_tty[n].smd->port_name,
res);
goto release_pil;
} else if (res < 0) {
pr_err("%s: Error waiting for %s modem: %d\n",
__func__,
smd_tty[n].smd->port_name,
res);
goto release_pil;
}
pr_info("%s: DS modem is OK, open smd0..\n",
__func__);
}
#endif
}
}
tasklet_init(&info->tty_tsklt, smd_tty_read, (unsigned long)info);
wake_lock_init(&info->wake_lock, WAKE_LOCK_SUSPEND,
smd_tty[n].smd->port_name);
scnprintf(info->ra_wake_lock_name, MAX_RA_WAKE_LOCK_NAME_LEN,
"SMD_TTY_%s_RA", smd_tty[n].smd->port_name);
wake_lock_init(&info->ra_wake_lock, WAKE_LOCK_SUSPEND,
info->ra_wake_lock_name);
res = smd_named_open_on_edge(smd_tty[n].smd->port_name,
smd_tty[n].smd->edge, &info->ch, info,
smd_tty_notify);
if (res < 0) {
SMD_TTY_INFO("%s: %s open failed %d\n",
__func__, smd_tty[n].smd->port_name, res);
goto release_wl_tl;
}
res = wait_event_interruptible_timeout(info->ch_opened_wait_queue,
info->is_open, (2 * HZ));
if (res == 0)
res = -ETIMEDOUT;
if (res < 0) {
SMD_TTY_INFO("%s: wait for %s smd_open failed %d\n",
__func__, smd_tty[n].smd->port_name, res);
goto close_ch;
}
SMD_TTY_INFO("%s with PID %u opened port %s",
current->comm, current->pid, smd_tty[n].smd->port_name);
smd_disable_read_intr(info->ch);
mutex_unlock(&smd_tty_lock);
return 0;
close_ch:
smd_close(info->ch);
info->ch = NULL;
release_wl_tl:
tasklet_kill(&info->tty_tsklt);
wake_lock_destroy(&info->wake_lock);
wake_lock_destroy(&info->ra_wake_lock);
release_pil:
subsystem_put(info->pil);
out:
mutex_unlock(&smd_tty_lock);
return res;
}
static int
wcnss_trigger_config(struct platform_device *pdev)
{
int ret;
struct qcom_wcnss_opts *pdata;
unsigned long wcnss_phys_addr;
int size = 0;
struct resource *res;
int has_pronto_hw = of_property_read_bool(pdev->dev.of_node,
"qcom,has_pronto_hw");
/* make sure we are only triggered once */
if (penv->triggered)
return 0;
penv->triggered = 1;
/* initialize the WCNSS device configuration */
pdata = pdev->dev.platform_data;
if (WCNSS_CONFIG_UNSPECIFIED == has_48mhz_xo) {
if (has_pronto_hw) {
has_48mhz_xo = of_property_read_bool(pdev->dev.of_node,
"qcom,has_48mhz_xo");
} else {
has_48mhz_xo = pdata->has_48mhz_xo;
}
}
penv->wcnss_hw_type = (has_pronto_hw) ? WCNSS_PRONTO_HW : WCNSS_RIVA_HW;
penv->wlan_config.use_48mhz_xo = has_48mhz_xo;
penv->thermal_mitigation = 0;
strlcpy(penv->wcnss_version, "INVALID", WCNSS_VERSION_LEN);
/* Configure 5 wire GPIOs */
if (!has_pronto_hw) {
penv->gpios_5wire = platform_get_resource_byname(pdev,
IORESOURCE_IO, "wcnss_gpios_5wire");
/* allocate 5-wire GPIO resources */
if (!penv->gpios_5wire) {
dev_err(&pdev->dev, "insufficient IO resources\n");
ret = -ENOENT;
goto fail_gpio_res;
}
ret = wcnss_gpios_config(penv->gpios_5wire, true);
} else
ret = wcnss_pronto_gpios_config(&pdev->dev, true);
if (ret) {
dev_err(&pdev->dev, "WCNSS gpios config failed.\n");
goto fail_gpio_res;
}
/* power up the WCNSS */
ret = wcnss_wlan_power(&pdev->dev, &penv->wlan_config,
WCNSS_WLAN_SWITCH_ON);
if (ret) {
dev_err(&pdev->dev, "WCNSS Power-up failed.\n");
goto fail_power;
}
/* trigger initialization of the WCNSS */
penv->pil = subsystem_get(WCNSS_PIL_DEVICE);
if (IS_ERR(penv->pil)) {
dev_err(&pdev->dev, "Peripheral Loader failed on WCNSS.\n");
ret = PTR_ERR(penv->pil);
penv->pil = NULL;
goto fail_pil;
}
/* allocate resources */
penv->mmio_res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
"wcnss_mmio");
penv->tx_irq_res = platform_get_resource_byname(pdev, IORESOURCE_IRQ,
"wcnss_wlantx_irq");
penv->rx_irq_res = platform_get_resource_byname(pdev, IORESOURCE_IRQ,
"wcnss_wlanrx_irq");
if (!(penv->mmio_res && penv->tx_irq_res && penv->rx_irq_res)) {
dev_err(&pdev->dev, "insufficient resources\n");
ret = -ENOENT;
goto fail_res;
}
INIT_WORK(&penv->wcnssctrl_rx_work, wcnssctrl_rx_handler);
INIT_WORK(&penv->wcnssctrl_version_work, wcnss_send_version_req);
INIT_WORK(&penv->wcnssctrl_nvbin_dnld_work, wcnss_nvbin_dnld_req);
wake_lock_init(&penv->wcnss_wake_lock, WAKE_LOCK_SUSPEND, "wcnss");
if (wcnss_hardware_type() == WCNSS_PRONTO_HW) {
size = 0x3000;
wcnss_phys_addr = MSM_PRONTO_PHYS;
} else {
wcnss_phys_addr = MSM_RIVA_PHYS;
size = SZ_256;
}
penv->msm_wcnss_base = ioremap(wcnss_phys_addr, size);
if (!penv->msm_wcnss_base) {
ret = -ENOMEM;
pr_err("%s: ioremap wcnss physical failed\n", __func__);
goto fail_wake;
}
if (wcnss_hardware_type() == WCNSS_RIVA_HW) {
penv->riva_ccu_base = ioremap(MSM_RIVA_CCU_BASE, SZ_512);
if (!penv->riva_ccu_base) {
ret = -ENOMEM;
pr_err("%s: ioremap wcnss physical failed\n", __func__);
goto fail_ioremap;
}
} else {
penv->pronto_a2xb_base = ioremap(MSM_PRONTO_A2XB_BASE, SZ_512);
if (!penv->pronto_a2xb_base) {
ret = -ENOMEM;
pr_err("%s: ioremap wcnss physical failed\n", __func__);
goto fail_ioremap;
}
penv->pronto_ccpu_base = ioremap(MSM_PRONTO_CCPU_BASE, SZ_512);
if (!penv->pronto_ccpu_base) {
ret = -ENOMEM;
pr_err("%s: ioremap wcnss physical failed\n", __func__);
goto fail_ioremap2;
}
/* for reset FIQ */
res = platform_get_resource_byname(penv->pdev,
IORESOURCE_MEM, "wcnss_fiq");
if (!res) {
dev_err(&pdev->dev, "insufficient irq mem resources\n");
ret = -ENOENT;
goto fail_ioremap3;
}
penv->fiq_reg = ioremap_nocache(res->start, resource_size(res));
if (!penv->fiq_reg) {
pr_err("wcnss: %s: ioremap_nocache() failed fiq_reg addr:%pr\n",
__func__, &res->start);
ret = -ENOMEM;
goto fail_ioremap3;
}
}
penv->cold_boot_done = 1;
return 0;
fail_ioremap3:
iounmap(penv->pronto_ccpu_base);
fail_ioremap2:
iounmap(penv->pronto_a2xb_base);
fail_ioremap:
iounmap(penv->msm_wcnss_base);
fail_wake:
wake_lock_destroy(&penv->wcnss_wake_lock);
fail_res:
if (penv->pil)
subsystem_put(penv->pil);
fail_pil:
wcnss_wlan_power(&pdev->dev, &penv->wlan_config,
WCNSS_WLAN_SWITCH_OFF);
fail_power:
if (has_pronto_hw)
wcnss_pronto_gpios_config(&pdev->dev, false);
else
wcnss_gpios_config(penv->gpios_5wire, false);
fail_gpio_res:
penv = NULL;
return ret;
}
