C++ (Cpp) sunxi_lcd_power_enable Examples

Example #1

File: lt070me05000.c Project: carpecarp/CC-A80-u-boot

static void LCD_power_on(u32 sel)
{
	sunxi_lcd_power_enable(sel, 0);//config lcd_power pin to open lcd power
	sunxi_lcd_delay_ms(5);
	sunxi_lcd_power_enable(sel, 1);//config lcd_power pin to open lcd power0
	sunxi_lcd_delay_ms(5);
	sunxi_lcd_power_enable(sel, 2);//config lcd_power pin to open lcd power2
	sunxi_lcd_delay_ms(5);
	power_en(1);
	sunxi_lcd_delay_ms(20);
	panel_reset(1);
	sunxi_lcd_delay_ms(5);
	sunxi_lcd_pin_cfg(sel, 1);
}

Example #2

File: S070WV20_MIPI_RGB.c Project: GREYFOXRGR/BPI-M3-bsp

static void LCD_power_on(u32 sel)
{
	sunxi_lcd_power_enable(sel, 0);//config lcd_power pin to open lcd power0
	sunxi_lcd_delay_ms(10);
	sunxi_lcd_power_enable(sel, 1);//config lcd_power pin to open lcd power1
	sunxi_lcd_delay_ms(10);
	power_en(1);
	sunxi_lcd_delay_ms(50);
	icn_en(1);
	//sunxi_lcd_delay_ms(10);
	//icn_en(0);
	//sunxi_lcd_delay_ms(30);
	//icn_en(1);
	sunxi_lcd_delay_ms(10);
	sunxi_lcd_pin_cfg(sel, 1);
	dprintk("***LCD_power_on_kernel\n");
	
}

Example #3

File: starry768x1024.c Project: newsy5/OrangePI-Kernel

static void LCD_power_on(u32 sel)
{
	sunxi_lcd_power_enable(sel, 0);//config lcd_power pin to open lcd power0
	sunxi_lcd_pin_cfg(sel, 1);
	sunxi_lcd_delay_us(100);
	sunxi_lcd_gpio_set_value(0,1,1);//stby
	sunxi_lcd_delay_ms(1);
	sunxi_lcd_gpio_set_value(0,0,1);//reset
}

Example #4

File: tft720x1280.c Project: GREYFOXRGR/BPI-M3-bsp

static void LCD_power_on(u32 sel)
{
	sunxi_lcd_power_enable(sel, 0);//config lcd_power pin to open lcd power0
	sunxi_lcd_pin_cfg(sel, 1);
}

Example #5

File: lp079x01.c Project: Aorjoa/bootloader

static void LCD_power_on(__u32 sel)
{
	sunxi_lcd_power_enable(sel, 0);//config lcd_power pin to open lcd power0
}

Example #6

File: t27p06.c Project: GREYFOXRGR/BPI-M3-bsp

static void LCD_power_on(u32 sel)
{
	sunxi_lcd_power_enable(sel, 0);//config lcd_power pin to open lcd power0
	sunxi_lcd_gpio_set_value(sel, 3, 0);//pwr_en, active low
	sunxi_lcd_pin_cfg(sel, 1);
}