// *************************************************************************************************
// @fn display_alarm
// @brief Display alarm time. 24H / 12H time format.
// @param u8 line LINE1, LINE2
// u8 update DISPLAY_LINE_UPDATE_FULL, DISPLAY_LINE_CLEAR
// @return none
// *************************************************************************************************
void display_alarm(u8 line, u8 update)
{
if (update == DISPLAY_LINE_UPDATE_FULL)
{
display_hours_12_or_24(switch_seg(line, LCD_SEG_L1_3_2, LCD_SEG_L2_3_2), sAlarm.hour, 2, 1, SEG_ON);
display_chars(switch_seg(line, LCD_SEG_L1_1_0, LCD_SEG_L2_1_0), _itoa(sAlarm.minute, 2, 0), SEG_ON);
display_symbol(switch_seg(line, LCD_SEG_L1_COL, LCD_SEG_L2_COL0), SEG_ON);
// Show blinking alarm icon
display_symbol(LCD_ICON_ALARM, SEG_ON_BLINK_ON);
}
else if (update == DISPLAY_LINE_CLEAR)
{
// Clean up function-specific segments before leaving function
display_symbol(LCD_SYMB_AM, SEG_OFF);
// Clear / set alarm icon
if (sAlarm.state == ALARM_DISABLED)
{
display_symbol(LCD_ICON_ALARM, SEG_OFF_BLINK_OFF);
}
else
{
display_symbol(LCD_ICON_ALARM, SEG_ON_BLINK_OFF);
}
}
}
// *************************************************************************************************
// @fn display_alarm
// @brief Display alarm time. 24H / 12H time format.
// @param u8 line LINE1, LINE2
// u8 update DISPLAY_LINE_UPDATE_FULL, DISPLAY_LINE_CLEAR
// @return none
// *************************************************************************************************
void display_alarm(u8 line, u8 update)
{
#ifndef CONFIG_METRIC_ONLY
u8 hour12;
#endif
if (update == DISPLAY_LINE_UPDATE_FULL)
{
#ifdef CONFIG_METRIC_ONLY
display_chars(switch_seg(line, LCD_SEG_L1_3_2, LCD_SEG_L2_3_2), itoa(sAlarm.hour, 2, 0), SEG_ON);
#else
if (sys.flag.use_metric_units)
{
// Display 24H alarm time "HH:MM"
display_chars(switch_seg(line, LCD_SEG_L1_3_2, LCD_SEG_L2_3_2), itoa(sAlarm.hour, 2, 0), SEG_ON);
}
else
{
// Display 12H alarm time "HH:MM" + AM/PM
hour12 = convert_hour_to_12H_format(sAlarm.hour);
display_chars(switch_seg(line, LCD_SEG_L1_3_2, LCD_SEG_L2_3_2), itoa(hour12, 2, 0), SEG_ON);
// Display AM/PM symbol
display_am_pm_symbol(sAlarm.hour);
}
#endif
display_chars(switch_seg(line, LCD_SEG_L1_1_0, LCD_SEG_L2_1_0), itoa(sAlarm.minute, 2, 0), SEG_ON);
display_symbol(switch_seg(line, LCD_SEG_L1_COL, LCD_SEG_L2_COL0), SEG_ON);
// Show blinking alarm icon
display_symbol(LCD_ICON_ALARM, SEG_ON_BLINK_ON);
// // If alarm is enabled, show icon
// if (sAlarm.state == ALARM_ENABLED)
// {
// display_symbol(LCD_ICON_ALARM, SEG_ON_BLINK_OFF);
// }
// // When alarm is disabled, blink icon to indicate that this is not current time!
// else if (sAlarm.state == ALARM_DISABLED)
// {
// }
}
else if (update == DISPLAY_LINE_CLEAR)
{
// Clean up function-specific segments before leaving function
display_symbol(LCD_SYMB_AM, SEG_OFF);
// Clear / set alarm icon
if (sAlarm.state == ALARM_DISABLED)
{
display_symbol(LCD_ICON_ALARM, SEG_OFF_BLINK_OFF);
}
else
{
display_symbol(LCD_ICON_ALARM, SEG_ON_BLINK_OFF);
}
}
}
// *************************************************************************************************
// @fn display_sidereal
// @brief Sidereal Clock display routine. Supports 24H and 12H time format,
// through the helper display_hours_with_12_24.
// @param u8 line LINE1
// u8 update DISPLAY_LINE_UPDATE_FULL, DISPLAY_LINE_UPDATE_PARTIAL
// @return none
// *************************************************************************************************
void display_sidereal(u8 line, u8 update)
{
// Partial update
if (update == DISPLAY_LINE_UPDATE_PARTIAL)
{
if(sSidereal_time.drawFlag != 0)
{
if (sSidereal_time.line1ViewStyle == DISPLAY_DEFAULT_VIEW)
{
switch(sSidereal_time.drawFlag)
{
case 3:
display_hours_12_or_24(switch_seg(line, LCD_SEG_L1_3_2, LCD_SEG_L2_3_2), sSidereal_time.hour, 2, 1, SEG_ON);
case 2:
display_chars(switch_seg(line, LCD_SEG_L1_1_0, LCD_SEG_L2_1_0), _itoa(sSidereal_time.minute, 2, 0), SEG_ON);
}
}
else
{
// Seconds are always updated
display_chars(switch_seg(line, LCD_SEG_L1_1_0, LCD_SEG_L2_1_0), _itoa(sSidereal_time.second, 2, 0), SEG_ON);
}
}
}
else if (update == DISPLAY_LINE_UPDATE_FULL)
{
if (line == LINE1)
{
// display "i" (like in sIdereal) to distinguish sidereal time clock from normal clock
display_symbol(LCD_UNIT_L1_I, SEG_ON);
}
// Full update
if ( ( line == LINE1 && sSidereal_time.line1ViewStyle == DISPLAY_DEFAULT_VIEW ) || ( line == LINE2 && sSidereal_time.line2ViewStyle == DISPLAY_DEFAULT_VIEW ) )
{
// Display hours
display_hours_12_or_24(switch_seg(line, LCD_SEG_L1_3_2, LCD_SEG_L2_3_2), sSidereal_time.hour, 2, 1, SEG_ON);
// Display minute
display_chars(switch_seg(line, LCD_SEG_L1_1_0, LCD_SEG_L2_1_0), _itoa(sSidereal_time.minute, 2, 0), SEG_ON);
display_symbol(switch_seg(line, LCD_SEG_L1_COL, LCD_SEG_L2_COL0), SEG_ON_BLINK_ON);
}
else
{
// Display seconds
display_chars(switch_seg(line, LCD_SEG_L1_1_0, LCD_SEG_L2_1_0), _itoa(sSidereal_time.second, 2, 0), SEG_ON);
display_symbol(switch_seg(line, LCD_SEG_L1_DP1, LCD_SEG_L2_DP), SEG_ON);
}
}
else if (update == DISPLAY_LINE_CLEAR)
{
display_symbol(switch_seg(line, LCD_SEG_L1_COL, LCD_SEG_L2_COL0), SEG_OFF_BLINK_OFF);
// // Change display style to default (HH:MM)
// sSidereal_time.line1ViewStyle = DISPLAY_DEFAULT_VIEW;
// Clean up AM/PM icon
display_symbol(LCD_SYMB_AM, SEG_OFF);
// cleanup "i" icon
display_symbol(LCD_UNIT_L1_I, SEG_OFF);
}
}
// *************************************************************************************************
// @fn display_time
// @brief Clock display routine. Supports 24H and 12H time format,
// through the helper display_hours_with_12_24.
// @param u8 line LINE1
// u8 update DISPLAY_LINE_UPDATE_FULL, DISPLAY_LINE_UPDATE_PARTIAL
// @return none
// *************************************************************************************************
void display_time(u8 line, u8 update)
{
// Partial update
if (update == DISPLAY_LINE_UPDATE_PARTIAL)
{
if(sTime.drawFlag != 0)
{
if (sTime.line1ViewStyle == DISPLAY_DEFAULT_VIEW)
{
switch(sTime.drawFlag)
{
case 3:
display_hours_12_or_24(switch_seg(line, LCD_SEG_L1_3_2, LCD_SEG_L2_3_2), sTime.hour, 2, 1, SEG_ON);
case 2:
display_chars(switch_seg(line, LCD_SEG_L1_1_0, LCD_SEG_L2_1_0), itoa(sTime.minute, 2, 0), SEG_ON);
}
}
else
{
// Seconds are always updated
display_chars(switch_seg(line, LCD_SEG_L1_1_0, LCD_SEG_L2_1_0), itoa(sTime.second, 2, 0), SEG_ON);
}
}
}
else if (update == DISPLAY_LINE_UPDATE_FULL)
{
// Full update
if ( ( line == LINE1 && sTime.line1ViewStyle == DISPLAY_DEFAULT_VIEW ) || ( line == LINE2 && sTime.line2ViewStyle == DISPLAY_DEFAULT_VIEW ) )
{
// Display hours
display_hours_12_or_24(switch_seg(line, LCD_SEG_L1_3_2, LCD_SEG_L2_3_2), sTime.hour, 2, 1, SEG_ON);
// Display minute
display_chars(switch_seg(line, LCD_SEG_L1_1_0, LCD_SEG_L2_1_0), itoa(sTime.minute, 2, 0), SEG_ON);
display_symbol(switch_seg(line, LCD_SEG_L1_COL, LCD_SEG_L2_COL0), SEG_ON_BLINK_ON);
}
else
{
// Display seconds
display_chars(switch_seg(line, LCD_SEG_L1_1_0, LCD_SEG_L2_1_0), itoa(sTime.second, 2, 0), SEG_ON);
display_symbol(switch_seg(line, LCD_SEG_L1_DP1, LCD_SEG_L2_DP), SEG_ON);
}
}
else if (update == DISPLAY_LINE_CLEAR)
{
display_symbol(switch_seg(line, LCD_SEG_L1_COL, LCD_SEG_L2_COL0), SEG_OFF_BLINK_OFF);
// Change display style to default (HH:MM)
sTime.line1ViewStyle = DISPLAY_DEFAULT_VIEW;
// Clean up AM/PM icon
display_symbol(LCD_SYMB_AM, SEG_OFF);
}
}
// *************************************************************************************************
// @fn display_alarm
// @brief Display alarm time. 24H / 12H time format.
// @param u8 line LINE1, LINE2
// u8 update DISPLAY_LINE_UPDATE_FULL, DISPLAY_LINE_CLEAR
// @return none
// *************************************************************************************************
void display_alarm(u8 line, u8 update)
{
u8 hour12;
if (update == DISPLAY_LINE_UPDATE_FULL)
{
if (sys.flag.use_metric_units)
{
// Display 24H alarm time "HH:MM"
display_chars(switch_seg(line, LCD_SEG_L1_3_2,
LCD_SEG_L2_3_2), int_to_array(sAlarm.hour, 2, 0), SEG_ON);
}
else
{
// Display 12H alarm time "HH:MM" + AM/PM
hour12 = convert_hour_to_12H_format(sAlarm.hour);
display_chars(switch_seg(line, LCD_SEG_L1_3_2,
LCD_SEG_L2_3_2), int_to_array(hour12, 2, 0), SEG_ON);
// Display AM/PM symbol
display_am_pm_symbol(sAlarm.hour);
}
display_chars(switch_seg(line, LCD_SEG_L1_1_0,
LCD_SEG_L2_1_0), int_to_array(sAlarm.minute, 2, 0), SEG_ON);
display_symbol(switch_seg(line, LCD_SEG_L1_COL, LCD_SEG_L2_COL0), SEG_ON);
// Show blinking alarm icon
display_symbol(LCD_ICON_ALARM, SEG_ON_BLINK_ON);
}
else if (update == DISPLAY_LINE_CLEAR)
{
// Clean up function-specific segments before leaving function
display_symbol(LCD_SYMB_AM, SEG_OFF);
// Clear / set alarm icon
if (sAlarm.state == ALARM_DISABLED)
{
display_symbol(LCD_ICON_ALARM, SEG_OFF_BLINK_OFF);
}
else
{
display_symbol(LCD_ICON_ALARM, SEG_ON_BLINK_OFF);
}
}
}
void display_makapaka(u8 line, u8 update) {
u8* ma = "MA";
u8* ka = "HA";
u8* pa = "PA";
if(update == DISPLAY_LINE_UPDATE_FULL) {
display_symbol(LCD_ICON_ALARM, SEG_ON);
display_symbol(LCD_ICON_HEART, SEG_ON);
display_chars(switch_seg(line, LCD_SEG_L1_3_2, LCD_SEG_L2_3_2), ma, SEG_ON);
display_chars(switch_seg(line, LCD_SEG_L1_1_0, LCD_SEG_L2_1_0), ka, SEG_ON);
/* display_chars(switch_seg(line, LCD_SEG_L1_5_2, LCD_SEG_L2_5_2), pa, SEG_ON);
*/
/* display_chars(switch_seg(line, LCD_SEG_L1_1_0, LCD_SEG_L2_1_0), ka, SEG_ON);
*/
}
else if(update == DISPLAY_LINE_CLEAR) {
display_symbol(LCD_ICON_ALARM, SEG_OFF);
display_symbol(LCD_ICON_HEART, SEG_OFF);
// *************************************************************************************************
// @fn display_alarm
// @brief Display alarm time. 24H / 12H time format.
// @param u8 line LINE1, LINE2
// u8 update DISPLAY_LINE_UPDATE_FULL, DISPLAY_LINE_CLEAR
// @return none
// *************************************************************************************************
void display_alarm(u8 line, u8 update)
{
if (update == DISPLAY_LINE_UPDATE_FULL)
{
// Display 24H alarm time "HH:MM"
display_chars(switch_seg(line, LCD_SEG_L1_3_2, LCD_SEG_L2_3_2), int_to_array(sAlarm.hour, 2, 0), SEG_ON);
display_chars(switch_seg(line, LCD_SEG_L1_1_0, LCD_SEG_L2_1_0), int_to_array(sAlarm.minute, 2, 0), SEG_ON);
display_symbol(switch_seg(line, LCD_SEG_L1_COL, LCD_SEG_L2_COL0), SEG_ON);
// Show blinking alarm icon
display_symbol(LCD_ICON_ALARM, SEG_ON_BLINK_ON);
// // If alarm is enabled, show icon
// if (sAlarm.state == ALARM_ENABLED)
// {
// display_symbol(LCD_ICON_ALARM, SEG_ON_BLINK_OFF);
// }
// // When alarm is disabled, blink icon to indicate that this is not current time!
// else if (sAlarm.state == ALARM_DISABLED)
// {
// }
}
else if (update == DISPLAY_LINE_CLEAR)
{
// Clean up function-specific segments before leaving function
display_symbol(LCD_SYMB_AM, SEG_OFF);
// Clear / set alarm icon
if (sAlarm.state == ALARM_DISABLED)
{
display_symbol(LCD_ICON_ALARM, SEG_OFF_BLINK_OFF);
}
else
{
display_symbol(LCD_ICON_ALARM, SEG_ON_BLINK_OFF);
}
}
}
// *************************************************************************************************
// @fn display_date
// @brief Display date in DD.MM format (metric units) or MM.DD (English units).
// @param u8 line LINE1, LINE2
// u8 update DISPLAY_LINE_UPDATE_FULL,
// DISPLAY_LINE_UPDATE_PARTIAL
// @return none
// *************************************************************************************************
void display_date(u8 line, u8 update)
{
u8 *str;
if (update == DISPLAY_LINE_UPDATE_FULL)
{
if (sDate.display == DISPLAY_DEFAULT_VIEW)
{
// Convert day to string
str = int_to_array(sDate.day, 2, 0);
if (sys.flag.use_metric_units)
{
display_chars(switch_seg(line, LCD_SEG_L1_3_2, LCD_SEG_L2_3_2), str, SEG_ON);
}
else
{
display_chars(switch_seg(line, LCD_SEG_L1_1_0, LCD_SEG_L2_1_0), str, SEG_ON);
}
// Convert month to string
str = int_to_array(sDate.month, 2, 0);
if (sys.flag.use_metric_units)
{
display_chars(switch_seg(line, LCD_SEG_L1_1_0, LCD_SEG_L2_1_0), str, SEG_ON);
}
else
{
display_chars(switch_seg(line, LCD_SEG_L1_3_2, LCD_SEG_L2_3_2), str, SEG_ON);
}
// Display "." to separate day and month
display_symbol(switch_seg(line, LCD_SEG_L1_DP1, LCD_SEG_L2_DP), SEG_ON);
}
else
{
// Convert year to string
str = int_to_array(sDate.year, 4, 0);
display_chars(switch_seg(line, LCD_SEG_L1_3_0, LCD_SEG_L2_3_0), str, SEG_ON);
// Clear "."
display_symbol(switch_seg(line, LCD_SEG_L1_DP1, LCD_SEG_L2_DP), SEG_OFF);
}
}
else if (update == DISPLAY_LINE_CLEAR)
{
// Show day and month on display when coming around next time
sDate.display = DISPLAY_DEFAULT_VIEW;
}
}
// *************************************************************************************************
// @fn display_time
// @brief Clock display routine. Supports 24H and 12H time format.
// @param u8 line LINE1
// u8 update DISPLAY_LINE_UPDATE_FULL, DISPLAY_LINE_UPDATE_PARTIAL
// @return none
// *************************************************************************************************
void display_time(u8 line, u8 update)
{
u8 hour12;
// Partial update
if (update == DISPLAY_LINE_UPDATE_PARTIAL)
{
if(sTime.drawFlag != 0)
{
if (sTime.line1ViewStyle == DISPLAY_DEFAULT_VIEW)
{
switch(sTime.drawFlag)
{
case 3: if (sys.flag.use_metric_units)
{
// Display 24H time "HH"
display_chars(switch_seg(line, LCD_SEG_L1_3_2, LCD_SEG_L2_3_2), itoa(sTime.hour, 2, 0), SEG_ON);
}
else
{
// Display 12H time "HH" + AM/PM
hour12 = convert_hour_to_12H_format(sTime.hour);
display_chars(switch_seg(line, LCD_SEG_L1_3_2, LCD_SEG_L2_3_2), itoa(hour12, 2, 0), SEG_ON);
display_am_pm_symbol(sTime.hour);
}
case 2: display_chars(switch_seg(line, LCD_SEG_L1_1_0, LCD_SEG_L2_1_0), itoa(sTime.minute, 2, 0), SEG_ON);
}
}
else
{
// Seconds are always updated
display_chars(switch_seg(line, LCD_SEG_L1_1_0, LCD_SEG_L2_1_0), itoa(sTime.second, 2, 0), SEG_ON);
}
}
}
else if (update == DISPLAY_LINE_UPDATE_FULL)
{
// Full update
if (sTime.line1ViewStyle == DISPLAY_DEFAULT_VIEW)
{
// Display 24H/12H time
if (sys.flag.use_metric_units)
{
// Display 24H time "HH"
display_chars(switch_seg(line, LCD_SEG_L1_3_2, LCD_SEG_L2_3_2), itoa(sTime.hour, 2, 0), SEG_ON);
}
else
{
// Display 12H time "HH" + AM/PM information
hour12 = convert_hour_to_12H_format(sTime.hour);
display_chars(switch_seg(line, LCD_SEG_L1_3_2, LCD_SEG_L2_3_2), itoa(hour12, 2, 0), SEG_ON);
// Display AM/PM information
if (line == LINE1)
{
display_am_pm_symbol(sTime.hour);
}
}
// Display minute
display_chars(switch_seg(line, LCD_SEG_L1_1_0, LCD_SEG_L2_1_0), itoa(sTime.minute, 2, 0), SEG_ON);
display_symbol(switch_seg(line, LCD_SEG_L1_COL, LCD_SEG_L2_COL0), SEG_ON_BLINK_ON);
}
else
{
// Display seconds
display_chars(switch_seg(line, LCD_SEG_L1_1_0, LCD_SEG_L2_1_0), itoa(sTime.second, 2, 0), SEG_ON);
display_symbol(switch_seg(line, LCD_SEG_L1_DP1, LCD_SEG_L2_DP), SEG_ON);
}
}
else if (update == DISPLAY_LINE_CLEAR)
{
display_symbol(switch_seg(line, LCD_SEG_L1_COL, LCD_SEG_L2_COL0), SEG_OFF_BLINK_OFF);
// Change display style to default (HH:MM)
sTime.line1ViewStyle = DISPLAY_DEFAULT_VIEW;
// Clean up AM/PM icon
display_symbol(LCD_SYMB_AM, SEG_OFF);
}
}
// *************************************************************************************************
// @fn display_date
// @brief Display date in DD.MM format (metric units) or MM.DD (English units).
// @param line_t line LINE1, LINE2
// update_t update DISPLAY_LINE_UPDATE_FULL, DISPLAY_LINE_UPDATE_PARTIAL
// @return none
// *************************************************************************************************
void display_date(line_t line, update_t update)
{
#ifdef CONFIG_DAY_OF_WEEK
const u8 weekDayStr[7][3] = {"SUN","MON","TUE","WED","THU","FRI","SAT"};
#endif
u8 * str;
if (update == DISPLAY_LINE_UPDATE_FULL)
{
switch (sDate.view)
{
case 0: //WWW.DD
// Convert day to string
#ifdef CONFIG_DAY_OF_WEEK
str = _itoa(sDate.day, 2, 1);
display_chars(switch_seg(line, LCD_SEG_L1_1_0, LCD_SEG_L2_1_0), str, SEG_ON);
//pfs BEGIN replace year display with day of week
//pfs algorith from http://klausler.com/new-dayofweek.html
#define BASE_YEAR 2001 // not a leap year, so no need to add 1
u8 skew;
skew = (sDate.year - BASE_YEAR)+(sDate.year - BASE_YEAR)/4; // compute number of leap years since BASE_YEAR
if ((29 == get_numberOfDays(2, sDate.year)) && (sDate.month < 3))
skew--; // if this is a leap year but before February 29
skew = (skew + sDate.day); // add day of current month
//add this month's skew value
switch(sDate.month) {
case 5:
skew += 1;
break;
case 8:
skew += 2;
break;
case 2:
case 3:
case 11:
skew += 3;
break;
case 6:
skew += 4;
break;
case 9:
case 12:
skew += 5;
break;
case 4:
case 7:
skew += 6;
break;
default: //January and October
break;
}
skew = skew%7;
str = (u8 *)weekDayStr[skew];
display_chars(switch_seg(line, LCD_SEG_L1_3_2, LCD_SEG_L2_4_2), str, SEG_ON);
display_symbol(switch_seg(line, LCD_SEG_L1_DP1, LCD_SEG_L2_DP), SEG_ON);
break;
#else
// skip this view
sDate.view++;
#endif
case 1: //MM DD
// Convert day to string
display_symbol(switch_seg(line, LCD_SEG_L1_DP1, LCD_SEG_L2_DP), SEG_ON);
// display date
#ifndef CONFIG_METRIC_ONLY
if (!sys.flag.use_metric_units) {
str = _itoa(sDate.day, 2, 0);
display_chars(switch_seg(line, LCD_SEG_L1_1_0, LCD_SEG_L2_1_0), str, SEG_ON);
// Convert month to string
str = _itoa(sDate.month, 2, 1);
display_chars(switch_seg(line, LCD_SEG_L1_3_2, LCD_SEG_L2_3_2), str, SEG_ON);
} else {
#else
if (1) {
#endif
str = _itoa(sDate.day, 2, 0);
display_chars(switch_seg(line, LCD_SEG_L1_3_2, LCD_SEG_L2_3_2), str, SEG_ON);
str = _itoa(sDate.month, 2, 0);
display_chars(switch_seg(line, LCD_SEG_L1_1_0, LCD_SEG_L2_1_0), str, SEG_ON);
}
break;
case 2: //YYYY
// Convert year to string
str = _itoa(sDate.year, 4, 0);
display_chars(switch_seg(line, LCD_SEG_L1_3_0, LCD_SEG_L2_3_0), str, SEG_ON);
break;
default:
display_time(line, update);
break;
}
}
else if (update == DISPLAY_LINE_UPDATE_PARTIAL)
{
if ((sDate.view == 3) || (display.flag.update_date))
display_date(line, DISPLAY_LINE_UPDATE_FULL);
}
else if (update == DISPLAY_LINE_CLEAR)
{
// Do some display cleanup (or just do nothing if everything is OK)
// This is NOT ONLY called on switch to next menu item
}
}
// *************************************************************************************************
// @fn display_date
// @brief Display date in DD.MM format (metric units) or MM.DD (English units).
// @param u8 line LINE1, LINE2
// u8 update DISPLAY_LINE_UPDATE_FULL,
// DISPLAY_LINE_UPDATE_PARTIAL
// @return none
// *************************************************************************************************
void display_date(u8 line, u8 update)
{
#ifdef CONFIG_DAY_OF_WEEK
const u8 weekDayStr[7][3] = {"SUN","MON","TUE","WED","THU","FRI","SAT"};
#endif
u8 *str;
if (update == DISPLAY_LINE_UPDATE_FULL)
{
switch (sDate.display)
{
case DISPLAY_DEFAULT_VIEW: //WWW.DD
// Convert day to string
#ifdef CONFIG_DAY_OF_WEEK
str = int_to_array(sDate.day, 2, 1);
display_chars(switch_seg(line, LCD_SEG_L1_1_0, LCD_SEG_L2_1_0), str, SEG_ON);
//pfs BEGIN replace year display with day of week
//pfs algorith from http://klausler.com/new-dayofweek.html
#define BASE_YEAR 2001 // not a leap year, so no need to add 1
u8 skew;
skew = (sDate.year - BASE_YEAR)+(sDate.year - BASE_YEAR)/4; // compute number of leap years since BASE_YEAR
if ((29 == get_numberOfDays(2, sDate.year)) && (sDate.month < 3))
skew--; // if this is a leap year but before February 29
skew = (skew + sDate.day); // add day of current month
//add this month's skew value
switch(sDate.month) {
case 5:
skew += 1;
break;
case 8:
skew += 2;
break;
case 2:
case 3:
case 11:
skew += 3;
break;
case 6:
skew += 4;
break;
case 9:
case 12:
skew += 5;
break;
case 4:
case 7:
skew += 6;
break;
default: //January and October
break;
}
skew = skew%7;
str = (u8 *)weekDayStr[skew];
display_chars(switch_seg(line, LCD_SEG_L1_3_2, LCD_SEG_L2_4_2), str, SEG_ON);
display_symbol(switch_seg(line, LCD_SEG_L1_DP1, LCD_SEG_L2_DP), SEG_ON);
break;
#else
// Convert day to string
str = int_to_array(sDate.day, 2, 0);
#ifndef CONFIG_METRIC_ONLY
if (sys.flag.use_metric_units)
{
#endif
display_chars(switch_seg(line, LCD_SEG_L1_3_2, LCD_SEG_L2_3_2), str, SEG_ON);
#ifndef CONFIG_METRIC_ONLY
}
else
{
display_chars(switch_seg(line, LCD_SEG_L1_1_0, LCD_SEG_L2_1_0), str, SEG_ON);
}
#endif
// Convert month to string
str = int_to_array(sDate.month, 2, 0);
#ifndef CONFIG_METRIC_ONLY
if (sys.flag.use_metric_units)
{
display_chars(switch_seg(line, LCD_SEG_L1_1_0, LCD_SEG_L2_1_0), str, SEG_ON);
}
else
{
display_chars(switch_seg(line, LCD_SEG_L1_3_2, LCD_SEG_L2_3_2), str, SEG_ON);
}
#else
display_chars(switch_seg(line, LCD_SEG_L1_1_0, LCD_SEG_L2_1_0), str, SEG_ON);
#endif //CONFIG_METRIC_ONLY
// Display "." to separate day and month
display_symbol(switch_seg(line, LCD_SEG_L1_DP1, LCD_SEG_L2_DP), SEG_ON);
break;
#endif //CONFIG_DAY_OF_WEEK
case DISPLAY_ALTERNATIVE_VIEW: //MM DD
#ifdef CONFIG_DAY_OF_WEEK
// Convert day to string
display_symbol(switch_seg(line, LCD_SEG_L1_DP1, LCD_SEG_L2_DP), SEG_ON);
// display date
#ifndef CONFIG_METRIC_ONLY
if (!sys.flag.use_metric_units) {
str = int_to_array(sDate.day, 2, 0);
display_chars(switch_seg(line, LCD_SEG_L1_1_0, LCD_SEG_L2_1_0), str, SEG_ON);
// Convert month to string
str = int_to_array(sDate.month, 2, 1);
display_chars(switch_seg(line, LCD_SEG_L1_3_2, LCD_SEG_L2_3_2), str, SEG_ON);
}
else
#else
if (1)
#endif //CONFIG_METRIC_ONLY
{
str = int_to_array(sDate.day, 2, 0);
display_chars(switch_seg(line, LCD_SEG_L1_3_2, LCD_SEG_L2_3_2), str, SEG_ON);
str = int_to_array(sDate.month, 2, 0);
display_chars(switch_seg(line, LCD_SEG_L1_1_0, LCD_SEG_L2_1_0), str, SEG_ON);
}
break;
case DISPLAY_ALTERNATIVE2_VIEW: //YYYY
#endif //CONFIG_DAY_OF_WEEK
// Convert year to string
str = int_to_array(sDate.year, 4, 0);
display_chars(switch_seg(line, LCD_SEG_L1_3_0, LCD_SEG_L2_3_0), str, SEG_ON);
// Clear "."
display_symbol(switch_seg(line, LCD_SEG_L1_DP1, LCD_SEG_L2_DP), SEG_OFF);
break;
default:
display_time(line, update);
break;
}
}
else if (update == DISPLAY_LINE_CLEAR)
{
// Show day and month on display when coming around next time
sDate.display = DISPLAY_DEFAULT_VIEW;
}
}
