static void decrease_mpu_freq_fn(struct work_struct *work)
{
struct omap_die_governor *omap_gov;
omap_gov = container_of(work, struct omap_die_governor,
decrease_mpu_freq_work.work);
omap_gov->sensor_temp = thermal_request_temp(omap_gov->temp_sensor);
thermal_sensor_set_temp(omap_gov->temp_sensor);
}
static int omap_report_temp(struct thermal_dev *tdev)
{
struct platform_device *pdev = to_platform_device(tdev->dev);
struct scm *scm_ptr = platform_get_drvdata(pdev);
int id = tdev->sen_id;
scm_ptr->therm_fw[id]->current_temp =
omap4460plus_scm_read_temp(scm_ptr, id);
if (scm_ptr->therm_fw[id]->current_temp != -EINVAL) {
thermal_sensor_set_temp(scm_ptr->therm_fw[id]);
kobject_uevent(&scm_ptr->tsh_ptr[id].pdev->dev.kobj,
KOBJ_CHANGE);
}
return scm_ptr->therm_fw[id]->current_temp;
}
static void pcb_report_fw_temp(struct thermal_dev *tdev)
{
struct platform_device *pdev = to_platform_device(tdev->dev);
struct pcb_temp_sensor *temp_sensor = platform_get_drvdata(pdev);
int ret;
pcb_read_current_temp(temp_sensor);
if (temp_sensor->therm_fw->current_temp != -EINVAL) {
ret = thermal_sensor_set_temp(temp_sensor->therm_fw);
if (ret == -ENODEV)
pr_err("%s:thermal_sensor_set_temp reports error\n",
__func__);
else
cancel_delayed_work_sync(&temp_sensor->pcb_sensor_work);
kobject_uevent(&temp_sensor->dev->kobj, KOBJ_CHANGE);
}
}
static irqreturn_t omap_talert_irq_handler(int irq, void *data)
{
struct omap_temp_sensor *temp_sensor = (struct omap_temp_sensor *)data;
int t_hot, t_cold, temp_offset, temp;
char env_temp[20];
char env_zone[20];
char *envp[] = { env_temp, env_zone, NULL };
t_hot = omap_temp_sensor_readl(temp_sensor, BGAP_STATUS_OFFSET)
& OMAP4_HOT_FLAG_MASK;
t_cold = omap_temp_sensor_readl(temp_sensor, BGAP_STATUS_OFFSET)
& OMAP4_COLD_FLAG_MASK;
temp_offset = omap_temp_sensor_readl(temp_sensor, BGAP_CTRL_OFFSET);
if (t_hot) {
temp_offset &= ~(OMAP4_MASK_HOT_MASK);
temp_offset |= OMAP4_MASK_COLD_MASK;
} else if (t_cold) {
temp_offset &= ~(OMAP4_MASK_COLD_MASK);
temp_offset |= OMAP4_MASK_HOT_MASK;
}
omap_temp_sensor_writel(temp_sensor, temp_offset, BGAP_CTRL_OFFSET);
temp = omap_temp_sensor_readl(temp_sensor, TEMP_SENSOR_CTRL_OFFSET);
temp &= (OMAP4_BGAP_TEMP_SENSOR_DTEMP_MASK);
if (!temp_sensor->is_efuse_valid)
pr_err_once("Non-trimmed BGAP, Temp not accurate\n");
/* look up for temperature in the table and return the
temperature */
if (temp < OMAP_ADC_START_VALUE || temp > OMAP_ADC_END_VALUE) {
pr_err("invalid adc code reported by the sensor %d\n", temp);
} else {
temp_sensor->therm_fw->current_temp =
adc_to_temp[temp - OMAP_ADC_START_VALUE];
thermal_sensor_set_temp(temp_sensor->therm_fw);
snprintf(env_temp, 20, "TEMP=%d",thermal_sensor_get_hotspot_temp(temp_sensor->therm_fw)/1000);
envp[0] = env_temp;
snprintf(env_zone, 20, "ZONE=%d",thermal_sensor_get_zone(temp_sensor->therm_fw));
envp[1] = env_zone;
kobject_uevent_env(&temp_sensor->dev->kobj, KOBJ_CHANGE, envp);
}
return IRQ_HANDLED;
}
static ssize_t set_temp_user_space(struct device *dev,
struct device_attribute *devattr,
const char *buf, size_t count)
{
struct platform_device *pdev = to_platform_device(dev);
struct omap_temp_sensor *temp_sensor = platform_get_drvdata(pdev);
long val;
if (strict_strtol(buf, 10, &val)) {
count = -EINVAL;
goto out;
}
if (!temp_sensor->debug && debug_thermal) {
pr_info("%s: Going into debug mode\n", __func__);
disable_irq_nosync(temp_sensor->irq);
temp_sensor->debug = 1;
} else if (temp_sensor->debug && !debug_thermal) {
pr_info("%s:Reenable temp sensor dbg mode %i\n",
__func__, temp_sensor->debug);
enable_irq(temp_sensor->irq);
temp_sensor->debug = 0;
temp_sensor->debug_temp = 0;
} else if ((temp_sensor->debug == 0) &&
(debug_thermal == 0)) {
pr_info("%s:Not in debug mode\n", __func__);
goto out;
} else {
pr_info("%s:Debug mode %i and setting temp to %li\n",
__func__, temp_sensor->debug, val);
}
/* Set new temperature */
temp_sensor->debug_temp = val;
temp_sensor->therm_fw->current_temp = val;
thermal_sensor_set_temp(temp_sensor->therm_fw);
/* Send a kobj_change */
kobject_uevent(&temp_sensor->dev->kobj, KOBJ_CHANGE);
out:
return count;
}
static int omap_report_temp(struct thermal_dev *tdev)
{
struct platform_device *pdev = to_platform_device(tdev->dev);
struct omap_temp_sensor *temp_sensor = platform_get_drvdata(pdev);
int ret;
temp_sensor->therm_fw->current_temp =
omap_read_current_temp(temp_sensor);
if (temp_sensor->therm_fw->current_temp != -EINVAL) {
ret = thermal_sensor_set_temp(temp_sensor->therm_fw);
if (ret == -ENODEV)
pr_err("%s:thermal_sensor_set_temp reports error\n",
__func__);
kobject_uevent(&temp_sensor->dev->kobj, KOBJ_CHANGE);
}
return temp_sensor->therm_fw->current_temp;
}
static void sim_report_fw_temp(struct thermal_dev *tdev)
{
struct platform_device *pdev = to_platform_device(tdev->dev);
struct sim_temp_sensor *temp_sensor = platform_get_drvdata(pdev);
int ret;
if (NULL == temp_sensor) {
pr_err("%s %d, platform_get_drvdata is NULL\n", __func__, __LINE__);
return -1;
}
temp_sensor->therm_fw->current_temp = sim_read_current_temp(temp_sensor);
if (temp_sensor->therm_fw->current_temp != -EINVAL) {
ret = thermal_sensor_set_temp(temp_sensor->therm_fw);
if (ret == -ENODEV)
pr_err("%s:thermal_sensor_set_temp reports error\n",
__func__);
kobject_uevent(&temp_sensor->dev->kobj, KOBJ_CHANGE);
}
}
static ssize_t tmp102_set_temp_user_space(struct device *dev,
struct device_attribute *devattr, const char *buf, size_t count)
{
struct i2c_client *client = to_i2c_client(dev);
struct tmp102_temp_sensor *tmp102 = i2c_get_clientdata(client);
long val;
if (strict_strtol(buf, 10, &val)) {
count = -EINVAL;
goto out;
}
/* Set new temperature */
tmp102->debug_temp = val;
tmp102->therm_fw->current_temp = val;
thermal_sensor_set_temp(tmp102->therm_fw);
/* Send a kobj_change */
kobject_uevent(&tmp102->dev->kobj, KOBJ_CHANGE);
out:
return count;
}
static ssize_t set_temp_user_space(struct device *dev,
struct device_attribute *devattr,
const char *buf, size_t count)
{
struct platform_device *pdev = to_platform_device(dev);
struct pcb_temp_sensor *temp_sensor = platform_get_drvdata(pdev);
long val;
if (strict_strtol(buf, 10, &val)) {
count = -EINVAL;
goto out;
}
/* Set new temperature */
temp_sensor->debug_temp = val;
temp_sensor->therm_fw->current_temp = val;
thermal_sensor_set_temp(temp_sensor->therm_fw);
/* Send a kobj_change */
kobject_uevent(&temp_sensor->dev->kobj, KOBJ_CHANGE);
out:
return count;
}
