Example #1
0
File: main.cpp Project: CCJY/coliru
int main() {
    print(halfthree() + halfthree() == three());
    print(halfthree() * two() == three());
    print(halfthree() * two() == halfthree() + halfthree());
    print(two() * halfthree() == three());
    print(two() * halfthree() == halfthree() + halfthree());
}
int main()
{
   typedef boost::intrusive::splaytree_algorithms<my_splaytree_node_traits> algo;
   my_node header, two(2), three(3);

   //Create an empty splaytree container:
   //"header" will be the header node of the tree
   algo::init_header(&header);

   //Now insert node "two" in the tree using the sorting functor
   algo::insert_equal_upper_bound(&header, &two, node_ptr_compare());

   //Now insert node "three" in the tree using the sorting functor
   algo::insert_equal_lower_bound(&header, &three, node_ptr_compare());

   //Now take the first node (the left node of the header)
   my_node *n = header.left_;
   assert(n == &two);

   //Now go to the next node
   n = algo::next_node(n);
   assert(n == &three);     

   //Erase a node just using a pointer to it
   algo::unlink(&two);

   //Erase a node using also the header (faster)
   algo::erase(&header, &three);
   return 0;
}
TEST(NAME, CONSTRUCTOR)
{
	Stack<int> one(5);
	for (size_t i = 1; i < 11; ++i)
	{
		one.push(i * i);
	}
	Stack<int> two(one);
	EXPECT_EQ(5, two.getSize());
	EXPECT_EQ(25, two.peek());

	for (size_t i = 1; i < 6; ++i)
	{
		one.pop();
	}
	EXPECT_EQ(0, one.getSize());

	int* nums = new int[15];
	for (int32 i = 0; i < 15; ++i)
	{
		nums[i] = i * i;
	}
	Stack<int> three(nums, 15);
	EXPECT_EQ(196, three.peek());
}
Example #4
0
std::pair<int, int> Pokerhand::hand_value() {
    int val;

    if ((val = royal_flush()))
        return std::make_pair(10, val);
    if ((val = straight_flush()))
        return std::make_pair(9, val);
    if ((val = four()))
        return std::make_pair(8, val);
    if ((val = full_house()))
        return std::make_pair(7, val);
    if ((val = flush()))
        return std::make_pair(6, val);
    if ((val = straight()))
        return std::make_pair(5, val);
    if ((val = three()))
        return std::make_pair(4, val);
    if ((val = pairs()))
        return std::make_pair(3, val);
    if ((val = pair()))
        return std::make_pair(2, val);
    if ((val = high_card()))
        return std::make_pair(1, val);

    return std::make_pair(0, val);
}
Example #5
0
void test_determinisation()
{
	std::cout << "Testing determinisation..." << std::endl << std::endl;

	State zero("0", state_type::NONFINAL);
	State one("1", state_type::NONFINAL);
	State two("2", state_type::NONFINAL);
	State three("3", state_type::FINAL);

	std::vector<State*> states;

	std::set<State*> zeroStatesA;
	std::set<State*> zeroStatesB;
	std::set<State*> oneStatesA;
	std::set<State*> twoStatesB;

	states.push_back(&zero);
	states.push_back(&one);
	states.push_back(&two);
	states.push_back(&three);

	zeroStatesA.insert(&zero);
	zeroStatesB.insert(&zero);
	zeroStatesB.insert(&one);
	oneStatesA.insert(&two);
	twoStatesB.insert(&three);

	std::unordered_map<char , std::set<State*> > zeroTransitions;
	std::unordered_map<char , std::set<State*> > oneTransitions;
	std::unordered_map<char , std::set<State*> > twoTransitions;
	std::unordered_map<char , std::set<State*> > threeTransitions;

	zeroTransitions['a'] = zeroStatesA;
	zeroTransitions['b'] = zeroStatesB;
	oneTransitions['a'] = oneStatesA;
	twoTransitions['b'] = twoStatesB;

	std::unordered_map< State*,  std::unordered_map<char , std::set<State*> > > transitions;

	transitions[&zero] = zeroTransitions;
	transitions[&one] = oneTransitions;
	transitions[&two] = twoTransitions;
	transitions[&three] = threeTransitions;

	Automata automata(transitions);
	automata.setInitial(&zero);
	automata.setCurrentState(&zero);
	automata.setStates(states);

	std::cout << "Before:" << std::endl << automata << std::endl;

	std::chrono::high_resolution_clock::time_point t1 = std::chrono::high_resolution_clock::now();
	automata.determinise();
	std::chrono::high_resolution_clock::time_point t2 = std::chrono::high_resolution_clock::now();

	std::cout << "After: " << std::endl << automata << std::endl;
	
	auto duration = std::chrono::duration_cast<std::chrono::milliseconds>( t2 - t1 ).count();
	std::cout << "Execution time: " << duration << " milliseconds." << std::endl << std::endl;
}
void ofxParametricSurface::reload(){
    if (!isSetup) {
        ofLogError("ofxMathMesh") << "cannot reload if the surface is not setup";
        return;
    }
    clear();
    int uMinDomainPoint = round(ofMap(uMin, absUMin, absUMax, 0, uDomainPoints.size()-1));
    int uMaxDomainPoint = round(ofMap(uMax, absUMin, absUMax, 0, uDomainPoints.size()-1));
    int vMinDomainPoint = round(ofMap(vMin, absVMin, absVMax, 0, vDomainPoints.size()-1));
    int vMaxDomianPoint = round(ofMap(vMax, absVMin, absVMax, 0, vDomainPoints.size()-1));
    
    for (int u = uMinDomainPoint; u < uMaxDomainPoint; u++) {
        for (int v = vMinDomainPoint; v < vMaxDomianPoint; v++) {
            ofPoint value1 = valueForPoint(uDomainPoints[u], vDomainPoints[v]);
            ofPoint value2 = valueForPoint(uDomainPoints[u], vDomainPoints[v+1]);
            ofPoint value3 = valueForPoint(uDomainPoints[u+1], vDomainPoints[v+1]);
            ofPoint value4 = valueForPoint(uDomainPoints[u+1], vDomainPoints[v]);
            ParametricPosition one(uDomainPoints[u],vDomainPoints[v],value1);
            ParametricPosition two(uDomainPoints[u],vDomainPoints[v+1],value2);
            ParametricPosition three(uDomainPoints[u+1],vDomainPoints[v+1],value3);
            ParametricPosition four(uDomainPoints[u+1],vDomainPoints[v],value4);
            addQuad(one, two, three, four);
        }
    }
    
}
Example #7
0
void main ()
{
	Person one;
	Person two("Smythecraft");
	Person three("Dimwiddy", "Sam");

	cout << "First object: " << endl;
	cout << "Name Surname: " << endl;
	one.Show();
	cout << "Surname, name" << endl;
	one.FormalShow();
	cout << endl;

	cout << "Second object: " << endl;
	cout << "Name Surname: " << endl;
	two.Show();
	cout << "Surname, name" << endl;
	two.FormalShow();
	cout << endl;

	cout << "Third object: " << endl;
	cout << "Name Surname: " << endl;
	three.Show();
	cout << "Surname, name" << endl;
	three.FormalShow();
	cout << endl;
	system("pause");
}
int main()
{
	//create four Port objects, one vintage
	Port one;
	Port two("Mason","Rose",10);
	Port three("Redtail","Red",4);
	Port four(three);
	VintagePort five("Vines",5,"Stomps",1988);
	
	cout << "Object one" << endl;
	one.Show();
	one = three;  //object one uses overloaded "=" to set one=three
	cout << "\nObject one = object three: " << one << endl << endl;
	
	cout << "Object two" << endl;
	two.Show();
	two -= 5;  //object two uses overloaded "-=" to subtract from bottles
	cout << "\nObject two bottles -= 5. Bottle count: " << two.BottleCount() << endl << endl;
	
	cout << "Object three" << endl;
	three.Show();
	three += 6;  //object three uses overloaded "+=" to add to bottles
	cout << "\nObject three bottles += 6. Bottle count: " << three.BottleCount() << endl << endl;
	
	cout << "Object four: " << four << endl;
	cout << "Object five: " <<  five << endl;
	cout << endl;

	return 0;
}
signed int
main(void)
{
	type_one*	one(nullptr);
	type_one*	two(nullptr);
	type_one*	three(nullptr);

	one = new type_one;
	two	= new type_one;

	delete one;
	delete two;
	delete one;

	one 	= new type_one;
	two 	= new type_one;
	three	= new type_one;

	std::cout << "one: " << one << " two: " << two << " three: " << three << std::endl;
	one->set_state(false);
	three->set_state(true);

	std::cout << "one:   '" << one->get_state() << "'" << std::endl;
	std::cout << "two:   '" << two->get_state() << "'" << std::endl;
	std::cout << "three: '" << three->get_state() << "'" << std::endl;

	return EXIT_SUCCESS;
}
Example #10
0
 void one_three(void) {
     printf("starting now...\n");
     one();
     two();
     three();
     printf("done!\n");
 }
TEST (kdbrestModelsEntryTest, SetAndGetAndHasTags)
{

	kdb::Key key (kdbrest::Config::instance ().getConfig ().get<std::string> ("kdb.path.configs") + std::string ("/test/key1"),
		      KEY_END);
	kdbrest::model::Entry entry (key);
	const char * taglist[] = { "one", "two", "three", "four", "five" };
	std::vector<std::string> tags (taglist, std::end (taglist));
	entry.setTags (tags);

	std::vector<std::string> retTags = entry.getTags ();

	for (int i = 0; i < 5; i++)
	{
		ASSERT_TRUE (std::find (retTags.begin (), retTags.end (), taglist[i]) != retTags.end ());
	}

	std::string one (taglist[0]);
	std::string three (taglist[2]);
	ASSERT_TRUE (entry.hasTag (one));
	ASSERT_TRUE (entry.hasTag (three));

	std::string seven ("seven");
	std::string fou ("fou");
	std::string five_uc ("FIVE");
	ASSERT_FALSE (entry.hasTag (seven));
	ASSERT_FALSE (entry.hasTag (fou));
	ASSERT_FALSE (entry.hasTag (five_uc));
}
int main(){
    Solution sol;
    ListNode one(3);
    ListNode two(2);
    ListNode three(1);
    one.next = &two;
    two.next = &three;
void print_metrics(){
	
	int i=0;

	ofstream unset;
	string nullstr("");

	mse one(NULL, NULL, -1, -1, unset, nullstr);
	cout<<"\t"<<++i<<": "<<one.get_metric_name()<<"\n";

	rmse two(NULL, NULL, -1, -1, unset, nullstr);
	cout<<"\t"<<++i<<": "<<two.get_metric_name()<<"\n";

	scc three(NULL, NULL, -1, -1, unset, nullstr);
	cout<<"\t"<<++i<<": "<<three.get_metric_name()<<"\n";

	difmap four(NULL, NULL, -1, -1, unset, nullstr);
	cout<<"\t"<<++i<<": "<<four.get_metric_name()<<"\n";

	difmap_wkey five(NULL, NULL, -1, -1, unset, nullstr);
	cout<<"\t"<<++i<<": "<<five.get_metric_name()<<"\n";

	colmap six(NULL, NULL, -1, -1, unset, nullstr);
	cout<<"\t"<<++i<<": "<<six.get_metric_name()<<"\n";

	scorco seven(NULL, NULL, -1, -1, unset, nullstr);
	cout<<"\t"<<++i<<": "<<seven.get_metric_name()<<"\n";
	
	modef eight(NULL, NULL, -1, -1, unset, nullstr);
	cout<<"\t"<<++i<<": "<<eight.get_metric_name()<<"\n";

}
Example #14
0
Projectile::Projectile(): Body()
{
	m_orient = matrix4x4d::Identity();
	m_type = 1;
	m_age = 0;
	m_parent = 0;
	m_radius = 0;
	m_flags |= FLAG_DRAW_LAST;

	m_prog = new Render::Shader("flat", "#define TEXTURE0 1\n");

	m_sideTex = Pi::textureCache->GetBillboardTexture(PIONEER_DATA_DIR "/textures/projectile_l.png");
	m_glowTex = Pi::textureCache->GetBillboardTexture(PIONEER_DATA_DIR "/textures/projectile_w.png");

	//zero at projectile position
	//+x down
	//+y right
	//+z forwards (or projectile direction)
	const float w = 0.5f;

	vector3f one(0.f, -w, 0.f); //top left
	vector3f two(0.f,  w, 0.f); //top right
	vector3f three(0.f,  w, -1.f); //bottom right
	vector3f four(0.f, -w, -1.f); //bottom left

	//add four intersecting planes to create a volumetric effect
	for (int i=0; i < 4; i++) {
		m_verts.push_back(Vertex(one, 0.f, 1.f));
		m_verts.push_back(Vertex(two, 1.f, 1.f));
		m_verts.push_back(Vertex(three, 1.f, 0.f));

		m_verts.push_back(Vertex(three, 1.f, 0.f));
		m_verts.push_back(Vertex(four, 0.f, 0.f));
		m_verts.push_back(Vertex(one, 0.f, 1.f));

		one.ArbRotate(vector3f(0.f, 0.f, 1.f), DEG2RAD(45.f));
		two.ArbRotate(vector3f(0.f, 0.f, 1.f), DEG2RAD(45.f));
		three.ArbRotate(vector3f(0.f, 0.f, 1.f), DEG2RAD(45.f));
		four.ArbRotate(vector3f(0.f, 0.f, 1.f), DEG2RAD(45.f));
	}

	//create quads for viewing on end
	//these are added in the same vertex array to avoid a
	//vertex pointer change
	float gw = 0.5f;
	float gz = -0.1f;

	for (int i=0; i < 4; i++) {
		m_verts.push_back(Vertex(vector3f(-gw, -gw, gz), 0.f, 1.f));
		m_verts.push_back(Vertex(vector3f(-gw, gw, gz), 1.f, 1.f));
		m_verts.push_back(Vertex(vector3f(gw, gw, gz),1.f, 0.f));

		m_verts.push_back(Vertex(vector3f(gw, gw, gz), 1.f, 0.f));
		m_verts.push_back(Vertex(vector3f(gw, -gw, gz), 0.f, 0.f));
		m_verts.push_back(Vertex(vector3f(-gw, -gw, gz), 0.f, 1.f));

		gw -= 0.1f; // they get smaller
		gz -= 0.2; // as they move back
	}
}
Example #15
0
int perthreadtestApp::main (void)
{
	outputOne = outputTwo = outputThree = 0;
	__THREADED = true;
	testThread one (&outputOne, 18321);
	testThread two (&outputTwo, 33510);
	testThread three (&outputThree, 18495);
	
	one.sendevent ("shutdown");
	two.sendevent ("shutdown");
	three.sendevent ("shutdown");
	
	threadStopped.wait ();
	::printf ("%i %i %i\n", outputOne, outputTwo, outputThree);
	threadStopped.wait ();
	::printf ("%i %i %i\n", outputOne, outputTwo, outputThree);
	threadStopped.wait ();
	::printf ("%i %i %i\n", outputOne, outputTwo, outputThree);
	
	value out;
	out.newval() = outputOne;
	out.newval() = outputTwo;
	out.newval() = outputThree;
	
	out.savexml ("out.xml");
	return 0;
}
Example #16
0
Graphics::VertexArray *Thruster::CreateGlowGeometry()
{
	Graphics::VertexArray *verts =
		new Graphics::VertexArray(Graphics::ATTRIB_POSITION | Graphics::ATTRIB_UV0);

	//create glow billboard for linear thrusters
	const float w = 0.2;

	vector3f one(-w, -w, 0.f); //top left
	vector3f two(-w,  w, 0.f); //top right
	vector3f three(w, w, 0.f); //bottom right
	vector3f four(w, -w, 0.f); //bottom left

	//uv coords
	const vector2f topLeft(0.f, 1.f);
	const vector2f topRight(1.f, 1.f);
	const vector2f botLeft(0.f, 0.f);
	const vector2f botRight(1.f, 0.f);

	for (int i = 0; i < 5; i++) {
		verts->Add(one, topLeft);
		verts->Add(two, topRight);
		verts->Add(three, botRight);

		verts->Add(three, botRight);
		verts->Add(four, botLeft);
		verts->Add(one, topLeft);

		one.z += .1f;
		two.z = three.z = four.z = one.z;
	}

	return verts;
}
Example #17
0
void object::test<3>()
{
    Keyed one("one"), two("two"), three("three");
    // We don't want to rely on the underlying container delivering keys
    // in any particular order. That allows us the flexibility to
    // reimplement LLInstanceTracker using, say, a hash map instead of a
    // std::map. We DO insist that every key appear exactly once.
    typedef std::vector<std::string> StringVector;
    StringVector keys(Keyed::beginKeys(), Keyed::endKeys());
    std::sort(keys.begin(), keys.end());
    StringVector::const_iterator ki(keys.begin());
    ensure_equals(*ki++, "one");
    ensure_equals(*ki++, "three");
    ensure_equals(*ki++, "two");
    // Use ensure() here because ensure_equals would want to display
    // mismatched values, and frankly that wouldn't help much.
    ensure("didn't reach end", ki == keys.end());

    // Use a somewhat different approach to order independence with
    // beginInstances(): explicitly capture the instances we know in a
    // set, and delete them as we iterate through.
    typedef std::set<Keyed*> InstanceSet;
    InstanceSet instances;
    instances.insert(&one);
    instances.insert(&two);
    instances.insert(&three);
    for (Keyed::instance_iter ii(Keyed::beginInstances()), iend(Keyed::endInstances());
            ii != iend; ++ii)
    {
        Keyed& ref = *ii;
        ensure_equals("spurious instance", instances.erase(&ref), 1);
    }
    ensure_equals("unreported instance", instances.size(), 0);
}
Example #18
0
//------------------------------update_ifg-------------------------------------
void PhaseConservativeCoalesce::update_ifg(uint lr1, uint lr2, IndexSet *n_lr1, IndexSet *n_lr2) {
  // Some original neighbors of lr1 might have gone away
  // because the constrained register mask prevented them.
  // Remove lr1 from such neighbors.
  IndexSetIterator one(n_lr1);
  uint neighbor;
  LRG &lrg1 = lrgs(lr1);
  while ((neighbor = one.next()) != 0)
    if( !_ulr.member(neighbor) )
      if( _phc._ifg->neighbors(neighbor)->remove(lr1) )
        lrgs(neighbor).inc_degree( -lrg1.compute_degree(lrgs(neighbor)) );


  // lr2 is now called (coalesced into) lr1.
  // Remove lr2 from the IFG.
  IndexSetIterator two(n_lr2);
  LRG &lrg2 = lrgs(lr2);
  while ((neighbor = two.next()) != 0)
    if( _phc._ifg->neighbors(neighbor)->remove(lr2) )
      lrgs(neighbor).inc_degree( -lrg2.compute_degree(lrgs(neighbor)) );

  // Some neighbors of intermediate copies now interfere with the
  // combined live range.
  IndexSetIterator three(&_ulr);
  while ((neighbor = three.next()) != 0)
    if( _phc._ifg->neighbors(neighbor)->insert(lr1) )
      lrgs(neighbor).inc_degree( lrg1.compute_degree(lrgs(neighbor)) );
}
int main()
{
	one();
	atexit(one);
	atexit(two);
	three();
	atexit(four);
}
Example #20
0
TEST_F(result, gives_number_of_rows_changed_on_a_modifying_statement) {
    sqlite::result one(db->execute(
        "UPDATE test SET name = 'test' WHERE id = 1;"
    ));
    EXPECT_EQ(1, one.row_modification_count());
    sqlite::result three(db->execute(
        "UPDATE test SET name = 'test';"
    ));
    EXPECT_EQ(3, three.row_modification_count());
}
Example #21
0
void start(void)
{
	int i;
	for (i = 0; i < 5; i++) {
		free(three());
	}
	for (i = 0; i < 3; i++) {
		free(two());
	}
}
Example #22
0
int main(){
	Point one(5,20),two(0,30),three(0,20),a(0,0),c(10,0),d(5,0),e(10,0);
	Robot MyRobot(10,20);
	WorldFrame wframe(a,0);
	JointFrame jframe1(a,0);
	JointFrame jframe2(c,0);
	TaskFrame tframe1(d,0);
	TaskFrame tframe2(e,90);
	MyRobot.PTPmove(tframe1,one);
	MyRobot.PTPmove(wframe,two);
	MyRobot.PTPmove(jframe1,three);
}
Example #23
0
void two(){
    int i,lim=sum-d04-d40-d22;
    if(lim>18)return;
    for(i=0;i<10 && lim-i>=0;i++){
        if(lim-i>=10)continue;
        d13=i;d31=lim-i;
        if(!notp[d04+d13*10+d22*100+d31*1000+d40*10000] &&
        d10+d11+d13<sum && d30+d31+d33<sum && d01+d11+d31<sum &&
        d03+d13+d33<sum)three();
    }

}
Example #24
0
int six(char number[110], int k)
{

    if(three(number,k)+two(number,k)==2)
    {
        return 1;
    }
    else
    {
        return 0;
    }
}
Example #25
0
int   main(){
	int year = 0; 
	one_printalltypesize();
	two_a();
	two_b();
	two_c();

	do{
		three(year);
	} while (year != 0);

return 0;
}
Example #26
0
InfInt C(int n, int k) {
	if (k == 0 || n == 0) 
		return 0;
	InfInt result1, result2, result3;

	std::thread one(fct, n, & result1);
	std::thread two(fct, k, & result2);
	std::thread three(fct, (n - k), & result3);

	one.join();
	two.join();
	three.join();
	return result1 / (result2 * result3);
}
Example #27
0
int main() {
  Person one; 
  Person two("Smythecraft");
  Person three("Dimwiddy", "Sam");
  one.Show();
  cout << endl;
  one.FormalShow();
  two.Show();
  two.FormalShow();
  cout << endl;
  three.Show();
  three.FormalShow();
  cout << endl;
}
Example #28
0
Thruster::Thruster(Graphics::Renderer *r, bool _linear, const vector3f &_pos, const vector3f &_dir)
: Node(NODE_TRANSPARENT)
, linearOnly(_linear)
, dir(_dir)
, pos(_pos)
{
	m_tVerts.Reset(new Graphics::VertexArray(Graphics::ATTRIB_POSITION | Graphics::ATTRIB_UV0));

	//zero at thruster center
	//+x down
	//+y right
	//+z backwards (or thrust direction)
	const float w = 0.5f;

	vector3f one(0.f, -w, 0.f); //top left
	vector3f two(0.f,  w, 0.f); //top right
	vector3f three(0.f,  w, 1.f); //bottom right
	vector3f four(0.f, -w, 1.f); //bottom left

	//uv coords
	const vector2f topLeft(0.f, 1.f);
	const vector2f topRight(1.f, 1.f);
	const vector2f botLeft(0.f, 0.f);
	const vector2f botRight(1.f, 0.f);

	//add four intersecting planes to create a volumetric effect
	for (int i=0; i < 4; i++) {
		m_tVerts->Add(one, topLeft);
		m_tVerts->Add(two, topRight);
		m_tVerts->Add(three, botRight);

		m_tVerts->Add(three, botRight);
		m_tVerts->Add(four, botLeft);
		m_tVerts->Add(one, topLeft);

		one.ArbRotate(vector3f(0.f, 0.f, 1.f), DEG2RAD(45.f));
		two.ArbRotate(vector3f(0.f, 0.f, 1.f), DEG2RAD(45.f));
		three.ArbRotate(vector3f(0.f, 0.f, 1.f), DEG2RAD(45.f));
		four.ArbRotate(vector3f(0.f, 0.f, 1.f), DEG2RAD(45.f));
	}

	//set up materials
	Graphics::MaterialDescriptor desc;
	desc.textures = 1;
	desc.twoSided = true;
	m_tMat.Reset(r->CreateMaterial(desc));
	m_tMat->texture0 = Graphics::TextureBuilder::Billboard(thrusterTextureFilename).GetOrCreateTexture(r, "model");
	m_tMat->diffuse = baseColor;
}
Example #29
0
int main() {
    MyStringClass one("String #1");
    MyStringClass two("Mah string #2 #blessed");
    MyStringClass three("#tres!");
    MyStringClass four("too good 4 me"); 

    Sub* sub = new Sub(std::move(one), std::move(two), std::move(three), std::move(four));
    Mid* mid = sub;
    //Base* base = sub;
    //std::cout << "Field 1 is: " << base->field.get() << std::endl;
    //base->field = MyStringClass("Eyo, boy");
    //delete base;

    delet(mid);

    return 0;
}
Example #30
0
void MainWindow::someSlot()
{
        if((ui->lineEdit->text() == "move north") && (this->tiles.value(1).value(0) == 1)){
                qDebug() << "north";
                emit one();
        }else if((ui->lineEdit->text() == "move east") && (this->tiles.value(1).value(1) == 1)){
                qDebug() << "east";
                emit two();
        }else if((ui->lineEdit->text() == "move south") && (this->tiles.value(1).value(2) == 1)){
                qDebug() << "south";
                emit three();
        }else if((ui->lineEdit->text() == "move west") && (this->tiles.value(1).value(3) == 1)){
                qDebug() << "west";
                emit four();
        }else
                qDebug() << "ERROR: INVALID COMMAND";
}