TEST(closedocument_checks, close_multiple)
{
TixiDocumentHandle documentHandle1 = -1;
TixiDocumentHandle documentHandle2 = -1;
TixiDocumentHandle documentHandle3 = -1;
const char* xmlFilename = "TestData/in.xml";
ASSERT_TRUE( tixiOpenDocument( xmlFilename, &documentHandle1 ) == SUCCESS );
ASSERT_TRUE( tixiOpenDocument( xmlFilename, &documentHandle2 ) == SUCCESS );
ASSERT_TRUE( tixiOpenDocument( xmlFilename, &documentHandle3 ) == SUCCESS );
ASSERT_TRUE( tixiCloseDocument( documentHandle1 ) == SUCCESS );
ASSERT_TRUE( tixiCloseDocument( documentHandle3 ) == SUCCESS );
ASSERT_TRUE( tixiCloseDocument( documentHandle2 ) == SUCCESS );
}
TEST(WingComponentSegment5, IntersectEta_bug)
{
const char* filename = "TestData/compseg-rotated.xml";
ReturnCode tixiRet;
TiglReturnCode tiglRet;
TiglCPACSConfigurationHandle tiglHandle = -1;
TixiDocumentHandle tixiHandle = -1;
tixiRet = tixiOpenDocument(filename, &tixiHandle);
ASSERT_EQ (SUCCESS, tixiRet);
tiglRet = tiglOpenCPACSConfiguration(tixiHandle, "", &tiglHandle);
ASSERT_EQ(TIGL_SUCCESS, tiglRet);
double xsi;
TiglBoolean hasWarning;
ASSERT_EQ(TIGL_SUCCESS, tiglWingComponentSegmentComputeEtaIntersection(tiglHandle, "D150_wing_CS", 0.0, 0.5, 1.0, 0.5, 0.9, &xsi, &hasWarning));
ASSERT_NEAR(0.5, xsi, 1e-6);
ASSERT_EQ(TIGL_SUCCESS, tiglWingComponentSegmentComputeEtaIntersection(tiglHandle, "D150_wing_CS", 0.0, 0.5, 1.0, 0.5, 0.1, &xsi, &hasWarning));
ASSERT_NEAR(0.5, xsi, 1e-6);
// Test some invalid inputs
ASSERT_EQ(TIGL_MATH_ERROR, tiglWingComponentSegmentComputeEtaIntersection(tiglHandle, "D150_wing_CS", 0.0, 0.5, 1.0, 0.5, 1.1, &xsi, &hasWarning));
ASSERT_EQ(TIGL_MATH_ERROR, tiglWingComponentSegmentComputeEtaIntersection(tiglHandle, "D150_wing_CS", 0.0, 0.5, 1.0, 0.5, -0.1, &xsi, &hasWarning));
ASSERT_EQ(TIGL_ERROR, tiglWingComponentSegmentComputeEtaIntersection(tiglHandle, "D150_wing_CS", -0.1, 0.5, 1.0, 0.5, 0.7, &xsi, &hasWarning));
ASSERT_EQ(TIGL_ERROR, tiglWingComponentSegmentComputeEtaIntersection(tiglHandle, "D150_wing_CS", 0.0, 0.5, 1.1, 0.5, 0.7, &xsi, &hasWarning));
ASSERT_EQ(TIGL_SUCCESS, tiglCloseCPACSConfiguration(tiglHandle));
ASSERT_EQ(SUCCESS, tixiCloseDocument(tixiHandle));
}
TEST(closedocument_checks, close_success)
{
TixiDocumentHandle documentHandle = -1;
const char* xmlFilename = "TestData/in.xml";
ASSERT_TRUE( tixiOpenDocument( xmlFilename, &documentHandle ) == SUCCESS );
ASSERT_TRUE( tixiCloseDocument( documentHandle ) == SUCCESS );
}
static void SetUpTestCase()
{
const char* filename = "TestData/CPACS_21_D150.xml";
ReturnCode tixiRet;
TiglReturnCode tiglRet;
tiglHandle = -1;
tixiHandle = -1;
tixiRet = tixiOpenDocument(filename, &tixiHandle);
ASSERT_TRUE (tixiRet == SUCCESS);
tiglRet = tiglOpenCPACSConfiguration(tixiHandle, "D150_VAMP", &tiglHandle);
ASSERT_TRUE(tiglRet == TIGL_SUCCESS);
}
virtual void SetUp()
{
const char* filename = "TestData/CPACS_20_D250_10.xml";
ReturnCode tixiRet;
TiglReturnCode tiglRet;
tiglHandle = -1;
tixiHandle = -1;
tixiRet = tixiOpenDocument(filename, &tixiHandle);
ASSERT_EQ (SUCCESS, tixiRet);
tiglRet = tiglOpenCPACSConfiguration(tixiHandle, "D250_VAMP", &tiglHandle);
ASSERT_EQ(TIGL_SUCCESS, tiglRet);
}
static void SetUpTestCase()
{
const char* filename = "TestData/simpletest.cpacs.xml";
ReturnCode tixiRet;
TiglReturnCode tiglRet;
tiglHandle = -1;
tixiHandle = -1;
tixiRet = tixiOpenDocument(filename, &tixiHandle);
ASSERT_TRUE (tixiRet == SUCCESS);
tiglRet = tiglOpenCPACSConfiguration(tixiHandle, "Cpacs2Test", &tiglHandle);
ASSERT_TRUE(tiglRet == TIGL_SUCCESS);
}
TEST(TiglSimpleFuselage, getSurfaceArea_HalfModel)
{
const char* filename = "TestData/simpletest-halfmodel.cpacs.xml";
TiglCPACSConfigurationHandle tiglHandle = -1;
TixiDocumentHandle tixiHandle = -1;
ASSERT_EQ(SUCCESS, tixiOpenDocument(filename, &tixiHandle));
ASSERT_EQ(TIGL_SUCCESS, tiglOpenCPACSConfiguration(tixiHandle, "", &tiglHandle));
double area = 0.;
tiglFuselageGetSurfaceArea(tiglHandle, 1, &area);
ASSERT_NEAR(M_PI, area, M_PI * 0.1);
tiglCloseCPACSConfiguration(tiglHandle);
tixiCloseDocument(tixiHandle);
}
/// This is a component segment with many segments
TEST(WingComponentSegment5, GetPointPerformance)
{
const char* filename = "TestData/component-segment-bwb.xml";
char* csUID = NULL;
ReturnCode tixiRet;
TiglReturnCode tiglRet;
TiglCPACSConfigurationHandle tiglHandle = -1;
TixiDocumentHandle tixiHandle = -1;
tixiRet = tixiOpenDocument(filename, &tixiHandle);
ASSERT_EQ (SUCCESS, tixiRet);
tiglRet = tiglOpenCPACSConfiguration(tixiHandle, "", &tiglHandle);
ASSERT_EQ(TIGL_SUCCESS, tiglRet);
tiglWingGetComponentSegmentUID(tiglHandle, 1, 1, &csUID);
int nruns = 50;
double x, y, z;
double w = 0.;
// first run takes longer due to creation of leading edge. we dont count it
tiglRet = tiglWingComponentSegmentGetPoint(tiglHandle, csUID, 0.95, 0.8, &x, &y, &z);
clock_t start = clock();
for(int i = 0; i < nruns; ++i){
tiglRet = tiglWingComponentSegmentGetPoint(tiglHandle, csUID, 0.95, 0.8, &x, &y, &z);
//just some dummy to prevent compiler optimization
w = w + 1.0;
}
clock_t stop = clock();
ASSERT_EQ((double)nruns, w);
double time_elapsed = (double)(stop - start)/(double)CLOCKS_PER_SEC/(double)nruns;
time_elapsed *= 1000.;
printf("Average time: %f [ms]\n", time_elapsed);
ASSERT_EQ(TIGL_SUCCESS, tiglCloseCPACSConfiguration(tiglHandle));
ASSERT_EQ(SUCCESS, tixiCloseDocument(tixiHandle));
}
/// A reported bug, where tigl creates an invalid error
TEST(WingComponentSegment5, GetSegmentIntersection_BUG2)
{
const char* filename = "TestData/component-segment-bwb.xml";
TiglCPACSConfigurationHandle tiglHandle = -1;
TixiDocumentHandle tixiHandle = -1;
ASSERT_EQ (SUCCESS, tixiOpenDocument(filename, &tixiHandle));
ASSERT_EQ(TIGL_SUCCESS, tiglOpenCPACSConfiguration(tixiHandle, "", &tiglHandle));
double xsi = 0;
TiglBoolean hasWarning;
ASSERT_EQ(TIGL_SUCCESS, tiglWingComponentSegmentGetSegmentIntersection(
tiglHandle, "BWB_CST_wing_CS", "BWB_CST_wingSegment49ID",
0.81268, 1., 0.96, 1., 1.,
&xsi, &hasWarning));
ASSERT_EQ(TIGL_TRUE, hasWarning);
ASSERT_EQ(TIGL_SUCCESS, tiglCloseCPACSConfiguration(tiglHandle));
ASSERT_EQ(SUCCESS, tixiCloseDocument(tixiHandle));
}
/// A reported bug, where the specified points do only
/// almost intersect the section border. TiGL has to be
/// friendly enough to let this small deviation happen
TEST(WingComponentSegment5, GetSegmentIntersection_BUG3)
{
const char* filename = "TestData/simpletest.cpacs.xml";
TiglCPACSConfigurationHandle tiglHandle = -1;
TixiDocumentHandle tixiHandle = -1;
ASSERT_EQ (SUCCESS, tixiOpenDocument(filename, &tixiHandle));
ASSERT_EQ(TIGL_SUCCESS, tiglOpenCPACSConfiguration(tixiHandle, "", &tiglHandle));
double xsi = 0;
// The segment border is at eta = 0.5. we test if 0.499995 is okay (all values below should fail)
ASSERT_EQ(TIGL_SUCCESS, tiglWingComponentSegmentGetSegmentIntersection(
tiglHandle, "WING_CS1", "Cpacs2Test_Wing_Seg_1_2",
0.0, 0.7, (1. - 1e-5)/2. + 1e-6, 0.7, 1.,
&xsi, NULL));
ASSERT_NEAR(0.7, xsi, 1e-7);
// This is too inaccurate now
ASSERT_EQ(TIGL_MATH_ERROR, tiglWingComponentSegmentGetSegmentIntersection(
tiglHandle, "WING_CS1", "Cpacs2Test_Wing_Seg_1_2",
0.0, 0.7, (1. - 1e-5)/2. - 1e-5, 0.7, 1.,
&xsi, NULL));
// check inner section
// The segment border is at eta = 0.0. we test if 0.000005 is okay (all values below should fail)
ASSERT_EQ(TIGL_SUCCESS, tiglWingComponentSegmentGetSegmentIntersection(
tiglHandle, "WING_CS1", "Cpacs2Test_Wing_Seg_1_2",
(1e-5)/2. - 1e-6, 0.7, 0.5 + 1e-5, 0.7, 0.,
&xsi, NULL));
// This should be too inaccurate now
ASSERT_EQ(TIGL_MATH_ERROR, tiglWingComponentSegmentGetSegmentIntersection(
tiglHandle, "WING_CS1", "Cpacs2Test_Wing_Seg_1_2",
(1e-5)/2. + 1e-5, 0.7, 0.5 + 1e-5, 0.7, 0.,
&xsi, NULL));
ASSERT_EQ(TIGL_SUCCESS, tiglCloseCPACSConfiguration(tiglHandle));
ASSERT_EQ(SUCCESS, tixiCloseDocument(tixiHandle));
}
TEST(WingComponentSegment5, GetSegmentIntersection_BUG)
{
const char* filename = "TestData/CS_SegIntersectionBUG.xml";
ReturnCode tixiRet;
TiglReturnCode tiglRet;
TiglCPACSConfigurationHandle tiglHandle = -1;
TixiDocumentHandle tixiHandle = -1;
tixiRet = tixiOpenDocument(filename, &tixiHandle);
ASSERT_EQ (SUCCESS, tixiRet);
tiglRet = tiglOpenCPACSConfiguration(tixiHandle, "", &tiglHandle);
ASSERT_EQ(TIGL_SUCCESS, tiglRet);
double xsi = 0;
TiglBoolean hasWarning;
tiglRet = tiglWingComponentSegmentGetSegmentIntersection(tiglHandle, "wing_Cseg", "wing_Seg2", 0.0589568, 1., 0.35, 1., 1., &xsi, &hasWarning);
ASSERT_EQ(TIGL_SUCCESS, tiglRet);
ASSERT_EQ(TIGL_TRUE, hasWarning);
ASSERT_NEAR(1.0, xsi, 1e-2);
ASSERT_EQ(TIGL_SUCCESS, tiglCloseCPACSConfiguration(tiglHandle));
ASSERT_EQ(SUCCESS, tixiCloseDocument(tixiHandle));
}
TEST(WingComponentSegment4, tiglWingComponentSegmentPointGetSegmentEtaXsi_BUG2)
{
TiglCPACSConfigurationHandle tiglHandle = -1;
TixiDocumentHandle tixiHandle = -1;
const char* filename = "TestData/simple_rectangle_compseg.xml";
ReturnCode tixiRet = tixiOpenDocument(filename, &tixiHandle);
ASSERT_TRUE (tixiRet == SUCCESS);
TiglReturnCode tiglRet = tiglOpenCPACSConfiguration(tixiHandle, "D150modelID", &tiglHandle);
ASSERT_TRUE(tiglRet == TIGL_SUCCESS);
double sEta = 0., sXsi = 0.;
char *wingUID = NULL, *segmentUID = NULL;
double errorDistance = 0;
tiglRet = tiglWingComponentSegmentPointGetSegmentEtaXsi(tiglHandle, "D150_wing_CS", 0.5, 0.10142, &wingUID, &segmentUID, &sEta, &sXsi, &errorDistance);
ASSERT_EQ(TIGL_SUCCESS, tiglRet);
ASSERT_LT(errorDistance, 1e-2);
ASSERT_STREQ("D150_wing_1Segment3ID", segmentUID);
ASSERT_NEAR(0.5, sEta, 0.0001);
tiglCloseCPACSConfiguration(tiglHandle);
tixiCloseDocument(tixiHandle);
}
virtual void SetUp()
{
const char* xmlFilename = "TestData/in.xml";
ASSERT_TRUE( tixiOpenDocument( xmlFilename, &documentHandle ) == SUCCESS);
}
virtual void SetUp() {
ASSERT_TRUE( tixiOpenDocument ( xmlInputFilename, &inDocumentHandle) == SUCCESS);
ASSERT_TRUE( tixiCreateDocument( outRootElementName, &outDocumentHandle) == SUCCESS);
}
