CreateSchemaCommand(CreateSchemaStmt *stmt, const char *queryString)
#endif
{
const char *schemaName = stmt->schemaname;
const char *authId = stmt->authid;
Oid namespaceId;
OverrideSearchPath *overridePath;
List *parsetree_list;
ListCell *parsetree_item;
Oid owner_uid;
Oid saved_uid;
int save_sec_context;
AclResult aclresult;
GetUserIdAndSecContext(&saved_uid, &save_sec_context);
/*
* Who is supposed to own the new schema?
*/
if (authId)
owner_uid = get_role_oid(authId, false);
else
owner_uid = saved_uid;
/*
* To create a schema, must have schema-create privilege on the current
* database and must be able to become the target role (this does not
* imply that the target role itself must have create-schema privilege).
* The latter provision guards against "giveaway" attacks. Note that a
* superuser will always have both of these privileges a fortiori.
*/
aclresult = pg_database_aclcheck(MyDatabaseId, saved_uid, ACL_CREATE);
if (aclresult != ACLCHECK_OK)
aclcheck_error(aclresult, ACL_KIND_DATABASE,
get_database_name(MyDatabaseId));
check_is_member_of_role(saved_uid, owner_uid);
/* Additional check to protect reserved schema names */
if (!allowSystemTableMods && IsReservedName(schemaName))
ereport(ERROR,
(errcode(ERRCODE_RESERVED_NAME),
errmsg("unacceptable schema name \"%s\"", schemaName),
errdetail("The prefix \"pg_\" is reserved for system schemas.")));
/*
* If the requested authorization is different from the current user,
* temporarily set the current user so that the object(s) will be created
* with the correct ownership.
*
* (The setting will be restored at the end of this routine, or in case of
* error, transaction abort will clean things up.)
*/
if (saved_uid != owner_uid)
SetUserIdAndSecContext(owner_uid,
save_sec_context | SECURITY_LOCAL_USERID_CHANGE);
/* Create the schema's namespace */
namespaceId = NamespaceCreate(schemaName, owner_uid, false);
/* Advance cmd counter to make the namespace visible */
CommandCounterIncrement();
/*
* Temporarily make the new namespace be the front of the search path, as
* well as the default creation target namespace. This will be undone at
* the end of this routine, or upon error.
*/
overridePath = GetOverrideSearchPath(CurrentMemoryContext);
overridePath->schemas = lcons_oid(namespaceId, overridePath->schemas);
/* XXX should we clear overridePath->useTemp? */
PushOverrideSearchPath(overridePath);
/*
* Examine the list of commands embedded in the CREATE SCHEMA command, and
* reorganize them into a sequentially executable order with no forward
* references. Note that the result is still a list of raw parsetrees ---
* we cannot, in general, run parse analysis on one statement until we
* have actually executed the prior ones.
*/
parsetree_list = transformCreateSchemaStmt(stmt);
#ifdef PGXC
/*
* Add a RemoteQuery node for a query at top level on a remote Coordinator,
* if not done already.
*/
if (!sentToRemote)
parsetree_list = AddRemoteQueryNode(parsetree_list, queryString,
EXEC_ON_ALL_NODES, false);
#endif
/*
* Execute each command contained in the CREATE SCHEMA. Since the grammar
* allows only utility commands in CREATE SCHEMA, there is no need to pass
* them through parse_analyze() or the rewriter; we can just hand them
* straight to ProcessUtility.
*/
foreach(parsetree_item, parsetree_list)
{
Node *stmt = (Node *) lfirst(parsetree_item);
/* do this step */
ProcessUtility(stmt,
queryString,
NULL,
false, /* not top level */
None_Receiver,
#ifdef PGXC
true,
#endif /* PGXC */
NULL);
/* make sure later steps can see the object created here */
CommandCounterIncrement();
}
/*
* CREATE SCHEMA
*/
Oid
CreateSchemaCommand(CreateSchemaStmt *stmt, const char *queryString)
{
const char *schemaName = stmt->schemaname;
Oid namespaceId;
OverrideSearchPath *overridePath;
List *parsetree_list;
ListCell *parsetree_item;
Oid owner_uid;
Oid saved_uid;
int save_sec_context;
AclResult aclresult;
ObjectAddress address;
GetUserIdAndSecContext(&saved_uid, &save_sec_context);
/*
* Who is supposed to own the new schema?
*/
if (stmt->authrole)
owner_uid = get_rolespec_oid(stmt->authrole, false);
else
owner_uid = saved_uid;
/* fill schema name with the user name if not specified */
if (!schemaName)
{
HeapTuple tuple;
tuple = SearchSysCache1(AUTHOID, ObjectIdGetDatum(owner_uid));
if (!HeapTupleIsValid(tuple))
elog(ERROR, "cache lookup failed for role %u", owner_uid);
schemaName =
pstrdup(NameStr(((Form_pg_authid) GETSTRUCT(tuple))->rolname));
ReleaseSysCache(tuple);
}
/*
* To create a schema, must have schema-create privilege on the current
* database and must be able to become the target role (this does not
* imply that the target role itself must have create-schema privilege).
* The latter provision guards against "giveaway" attacks. Note that a
* superuser will always have both of these privileges a fortiori.
*/
aclresult = pg_database_aclcheck(MyDatabaseId, saved_uid, ACL_CREATE);
if (aclresult != ACLCHECK_OK)
aclcheck_error(aclresult, ACL_KIND_DATABASE,
get_database_name(MyDatabaseId));
check_is_member_of_role(saved_uid, owner_uid);
/* Additional check to protect reserved schema names */
if (!allowSystemTableMods && IsReservedName(schemaName))
ereport(ERROR,
(errcode(ERRCODE_RESERVED_NAME),
errmsg("unacceptable schema name \"%s\"", schemaName),
errdetail("The prefix \"pg_\" is reserved for system schemas.")));
/*
* If if_not_exists was given and the schema already exists, bail out.
* (Note: we needn't check this when not if_not_exists, because
* NamespaceCreate will complain anyway.) We could do this before making
* the permissions checks, but since CREATE TABLE IF NOT EXISTS makes its
* creation-permission check first, we do likewise.
*/
if (stmt->if_not_exists &&
SearchSysCacheExists1(NAMESPACENAME, PointerGetDatum(schemaName)))
{
ereport(NOTICE,
(errcode(ERRCODE_DUPLICATE_SCHEMA),
errmsg("schema \"%s\" already exists, skipping",
schemaName)));
return InvalidOid;
}
/*
* If the requested authorization is different from the current user,
* temporarily set the current user so that the object(s) will be created
* with the correct ownership.
*
* (The setting will be restored at the end of this routine, or in case of
* error, transaction abort will clean things up.)
*/
if (saved_uid != owner_uid)
SetUserIdAndSecContext(owner_uid,
save_sec_context | SECURITY_LOCAL_USERID_CHANGE);
/* Create the schema's namespace */
namespaceId = NamespaceCreate(schemaName, owner_uid, false);
/* Advance cmd counter to make the namespace visible */
CommandCounterIncrement();
/*
* Temporarily make the new namespace be the front of the search path, as
* well as the default creation target namespace. This will be undone at
* the end of this routine, or upon error.
*/
overridePath = GetOverrideSearchPath(CurrentMemoryContext);
overridePath->schemas = lcons_oid(namespaceId, overridePath->schemas);
/* XXX should we clear overridePath->useTemp? */
PushOverrideSearchPath(overridePath);
/*
* Report the new schema to possibly interested event triggers. Note we
* must do this here and not in ProcessUtilitySlow because otherwise the
* objects created below are reported before the schema, which would be
* wrong.
*/
ObjectAddressSet(address, NamespaceRelationId, namespaceId);
EventTriggerCollectSimpleCommand(address, InvalidObjectAddress,
(Node *) stmt);
/*
* Examine the list of commands embedded in the CREATE SCHEMA command, and
* reorganize them into a sequentially executable order with no forward
* references. Note that the result is still a list of raw parsetrees ---
* we cannot, in general, run parse analysis on one statement until we
* have actually executed the prior ones.
*/
parsetree_list = transformCreateSchemaStmt(stmt);
/*
* Execute each command contained in the CREATE SCHEMA. Since the grammar
* allows only utility commands in CREATE SCHEMA, there is no need to pass
* them through parse_analyze() or the rewriter; we can just hand them
* straight to ProcessUtility.
*/
foreach(parsetree_item, parsetree_list)
{
Node *stmt = (Node *) lfirst(parsetree_item);
/* do this step */
ProcessUtility(stmt,
queryString,
PROCESS_UTILITY_SUBCOMMAND,
NULL,
None_Receiver,
NULL);
/* make sure later steps can see the object created here */
CommandCounterIncrement();
}
/*
* CREATE SCHEMA
*/
void
CreateSchemaCommand(CreateSchemaStmt *stmt, const char *queryString)
{
const char *schemaName = stmt->schemaname;
const char *authId = stmt->authid;
Oid namespaceId;
OverrideSearchPath *overridePath;
List *parsetree_list;
ListCell *parsetree_item;
Oid owner_uid;
Oid saved_uid;
int save_sec_context;
AclResult aclresult;
bool shouldDispatch = (Gp_role == GP_ROLE_DISPATCH &&
!IsBootstrapProcessingMode());
/*
* GPDB: Creation of temporary namespaces is a special case. This statement
* is dispatched by the dispatcher node the first time a temporary table is
* created. It bypasses all the normal checks and logic of schema creation,
* and is routed to the internal routine for creating temporary namespaces,
* instead.
*/
if (stmt->istemp)
{
Assert(Gp_role == GP_ROLE_EXECUTE);
Assert(stmt->schemaname == InvalidOid);
Assert(stmt->authid == NULL);
Assert(stmt->schemaElts == NIL);
Assert(stmt->schemaOid != InvalidOid);
Assert(stmt->toastSchemaOid != InvalidOid);
InitTempTableNamespaceWithOids(stmt->schemaOid,
stmt->toastSchemaOid);
return;
}
GetUserIdAndSecContext(&saved_uid, &save_sec_context);
/*
* Who is supposed to own the new schema?
*/
if (authId)
owner_uid = get_roleid_checked(authId);
else
owner_uid = saved_uid;
/*
* To create a schema, must have schema-create privilege on the current
* database and must be able to become the target role (this does not
* imply that the target role itself must have create-schema privilege).
* The latter provision guards against "giveaway" attacks. Note that a
* superuser will always have both of these privileges a fortiori.
*/
aclresult = pg_database_aclcheck(MyDatabaseId, saved_uid, ACL_CREATE);
if (aclresult != ACLCHECK_OK)
aclcheck_error(aclresult, ACL_KIND_DATABASE,
get_database_name(MyDatabaseId));
check_is_member_of_role(saved_uid, owner_uid);
/* Additional check to protect reserved schema names */
if (!allowSystemTableModsDDL && IsReservedName(schemaName))
{
ereport(ERROR,
(errcode(ERRCODE_RESERVED_NAME),
errmsg("unacceptable schema name \"%s\"", schemaName),
errdetail("The prefix \"%s\" is reserved for system schemas.",
GetReservedPrefix(schemaName))));
}
/*
* If the requested authorization is different from the current user,
* temporarily set the current user so that the object(s) will be created
* with the correct ownership.
*
* (The setting will be restored at the end of this routine, or in case
* of error, transaction abort will clean things up.)
*/
if (saved_uid != owner_uid)
SetUserIdAndSecContext(owner_uid,
save_sec_context | SECURITY_LOCAL_USERID_CHANGE);
/* Create the schema's namespace */
if (shouldDispatch || Gp_role != GP_ROLE_EXECUTE)
{
namespaceId = NamespaceCreate(schemaName, owner_uid, 0);
if (shouldDispatch)
{
elog(DEBUG5, "shouldDispatch = true, namespaceOid = %d", namespaceId);
Assert(stmt->schemaOid == 0);
stmt->schemaOid = namespaceId;
/*
* Dispatch the command to all primary and mirror segment dbs.
* Starts a global transaction and reconfigures cluster if needed.
* Waits for QEs to finish. Exits via ereport(ERROR,...) if error.
*/
CdbDispatchUtilityStatement((Node *) stmt,
DF_CANCEL_ON_ERROR |
DF_WITH_SNAPSHOT |
DF_NEED_TWO_PHASE,
NULL);
}
/* MPP-6929: metadata tracking */
if (Gp_role == GP_ROLE_DISPATCH)
MetaTrackAddObject(NamespaceRelationId,
namespaceId,
saved_uid,
"CREATE", "SCHEMA"
);
}
else
{
namespaceId = NamespaceCreate(schemaName, owner_uid, stmt->schemaOid);
}
/* Advance cmd counter to make the namespace visible */
CommandCounterIncrement();
/*
* Temporarily make the new namespace be the front of the search path, as
* well as the default creation target namespace. This will be undone at
* the end of this routine, or upon error.
*/
overridePath = GetOverrideSearchPath(CurrentMemoryContext);
overridePath->schemas = lcons_oid(namespaceId, overridePath->schemas);
/* XXX should we clear overridePath->useTemp? */
PushOverrideSearchPath(overridePath);
/*
* Examine the list of commands embedded in the CREATE SCHEMA command, and
* reorganize them into a sequentially executable order with no forward
* references. Note that the result is still a list of raw parsetrees ---
* we cannot, in general, run parse analysis on one statement until we
* have actually executed the prior ones.
*/
parsetree_list = transformCreateSchemaStmt(stmt);
/*
* Execute each command contained in the CREATE SCHEMA. Since the grammar
* allows only utility commands in CREATE SCHEMA, there is no need to pass
* them through parse_analyze() or the rewriter; we can just hand them
* straight to ProcessUtility.
*/
foreach(parsetree_item, parsetree_list)
{
Node *stmt = (Node *) lfirst(parsetree_item);
/* do this step */
ProcessUtility(stmt,
queryString,
NULL,
false, /* not top level */
None_Receiver,
NULL);
/* make sure later steps can see the object created here */
CommandCounterIncrement();
}
