C++ (Cpp) tsec_attach Examples

Example #1

File: if_tsec_fdt.c Project: jamesbjackson/src

static int
tsec_fdt_attach(device_t dev)
{
	struct tsec_softc *sc;
	phandle_t phy;
	int error = 0;

	sc = device_get_softc(dev);
	sc->dev = dev;
	sc->node = ofw_bus_get_node(dev);

	/* Get phy address from fdt */
	if (OF_getencprop(sc->node, "phy-handle", &phy, sizeof(phy)) <= 0) {
		device_printf(dev, "PHY not found in device tree");
		return (ENXIO);
	}

	phy = OF_node_from_xref(phy);
	OF_decode_addr(OF_parent(phy), 0, &sc->phy_bst, &sc->phy_bsh);
	OF_getencprop(phy, "reg", &sc->phyaddr, sizeof(sc->phyaddr));

	/* Init timer */
	callout_init(&sc->tsec_callout, 1);

	/* Init locks */
	mtx_init(&sc->transmit_lock, device_get_nameunit(dev), "TSEC TX lock",
	    MTX_DEF);
	mtx_init(&sc->receive_lock, device_get_nameunit(dev), "TSEC RX lock",
	    MTX_DEF);
	mtx_init(&sc->ic_lock, device_get_nameunit(dev), "TSEC IC lock",
	    MTX_DEF);

	/* Allocate IO memory for TSEC registers */
	sc->sc_rrid = 0;
	sc->sc_rres = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &sc->sc_rrid,
	    RF_ACTIVE);
	if (sc->sc_rres == NULL) {
		device_printf(dev, "could not allocate IO memory range!\n");
		goto fail1;
	}
	sc->sc_bas.bsh = rman_get_bushandle(sc->sc_rres);
	sc->sc_bas.bst = rman_get_bustag(sc->sc_rres);

	/* TSEC attach */
	if (tsec_attach(sc) != 0) {
		device_printf(dev, "could not be configured\n");
		goto fail2;
	}

	/* Set up interrupts (TX/RX/ERR) */
	sc->sc_transmit_irid = TSEC_RID_TXIRQ;
	error = tsec_setup_intr(sc, &sc->sc_transmit_ires,
	    &sc->sc_transmit_ihand, &sc->sc_transmit_irid,
	    tsec_transmit_intr, "TX");
	if (error)
		goto fail2;

	sc->sc_receive_irid = TSEC_RID_RXIRQ;
	error = tsec_setup_intr(sc, &sc->sc_receive_ires,
	    &sc->sc_receive_ihand, &sc->sc_receive_irid,
	    tsec_receive_intr, "RX");
	if (error)
		goto fail3;

	sc->sc_error_irid = TSEC_RID_ERRIRQ;
	error = tsec_setup_intr(sc, &sc->sc_error_ires,
	    &sc->sc_error_ihand, &sc->sc_error_irid,
	    tsec_error_intr, "ERR");
	if (error)
		goto fail4;

	return (0);

fail4:
	tsec_release_intr(sc, sc->sc_receive_ires, sc->sc_receive_ihand,
	    sc->sc_receive_irid, "RX");
fail3:
	tsec_release_intr(sc, sc->sc_transmit_ires, sc->sc_transmit_ihand,
	    sc->sc_transmit_irid, "TX");
fail2:
	bus_release_resource(dev, SYS_RES_MEMORY, sc->sc_rrid, sc->sc_rres);
fail1:
	mtx_destroy(&sc->receive_lock);
	mtx_destroy(&sc->transmit_lock);
	return (ENXIO);
}

Example #2

static int
tsec_fdt_attach(device_t dev)
{
	struct tsec_softc *sc;
	int error = 0;

	sc = device_get_softc(dev);
	sc->dev = dev;
	sc->node = ofw_bus_get_node(dev);

	/* XXX add comment on weird FSL's MII registers access design */
	if (device_get_unit(dev) == 0)
		tsec0_sc = sc;

	/* Get phy address from fdt */
	if (fdt_get_phyaddr(sc->node, &sc->phyaddr) != 0)
		return (ENXIO);

	/* Init timer */
	callout_init(&sc->tsec_callout, 1);

	/* Init locks */
	mtx_init(&sc->transmit_lock, device_get_nameunit(dev), "TSEC TX lock",
	    MTX_DEF);
	mtx_init(&sc->receive_lock, device_get_nameunit(dev), "TSEC RX lock",
	    MTX_DEF);
	mtx_init(&sc->ic_lock, device_get_nameunit(dev), "TSEC IC lock",
	    MTX_DEF);

	/* Allocate IO memory for TSEC registers */
	sc->sc_rrid = 0;
	sc->sc_rres = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &sc->sc_rrid,
	    RF_ACTIVE);
	if (sc->sc_rres == NULL) {
		device_printf(dev, "could not allocate IO memory range!\n");
		goto fail1;
	}
	sc->sc_bas.bsh = rman_get_bushandle(sc->sc_rres);
	sc->sc_bas.bst = rman_get_bustag(sc->sc_rres);

	/* TSEC attach */
	if (tsec_attach(sc) != 0) {
		device_printf(dev, "could not be configured\n");
		goto fail2;
	}

	/* Set up interrupts (TX/RX/ERR) */
	sc->sc_transmit_irid = TSEC_RID_TXIRQ;
	error = tsec_setup_intr(sc, &sc->sc_transmit_ires,
	    &sc->sc_transmit_ihand, &sc->sc_transmit_irid,
	    tsec_transmit_intr, "TX");
	if (error)
		goto fail2;

	sc->sc_receive_irid = TSEC_RID_RXIRQ;
	error = tsec_setup_intr(sc, &sc->sc_receive_ires,
	    &sc->sc_receive_ihand, &sc->sc_receive_irid,
	    tsec_receive_intr, "RX");
	if (error)
		goto fail3;

	sc->sc_error_irid = TSEC_RID_ERRIRQ;
	error = tsec_setup_intr(sc, &sc->sc_error_ires,
	    &sc->sc_error_ihand, &sc->sc_error_irid,
	    tsec_error_intr, "ERR");
	if (error)
		goto fail4;

	return (0);

fail4:
	tsec_release_intr(sc, sc->sc_receive_ires, sc->sc_receive_ihand,
	    sc->sc_receive_irid, "RX");
fail3:
	tsec_release_intr(sc, sc->sc_transmit_ires, sc->sc_transmit_ihand,
	    sc->sc_transmit_irid, "TX");
fail2:
	bus_release_resource(dev, SYS_RES_MEMORY, sc->sc_rrid, sc->sc_rres);
fail1:
	mtx_destroy(&sc->receive_lock);
	mtx_destroy(&sc->transmit_lock);
	return (ENXIO);
}