/*
* Function name: twa_detach
* Description: Called when the controller is being detached from
* the pci bus.
*
* Input: dev -- bus device corresponding to the ctlr
* Output: None
* Return value: 0 -- success
* non-zero-- failure
*/
static TW_INT32
twa_detach(device_t dev)
{
struct twa_softc *sc = device_get_softc(dev);
TW_INT32 error;
tw_osli_dbg_dprintf(3, sc, "entered");
error = EBUSY;
if (sc->open) {
tw_osli_printf(sc, "error = %d",
TW_CL_SEVERITY_ERROR_STRING,
TW_CL_MESSAGE_SOURCE_FREEBSD_DRIVER,
0x2014,
"Device open",
error);
goto out;
}
/* Shut the controller down. */
if ((error = twa_shutdown(dev)))
goto out;
/* Free all resources associated with this controller. */
tw_osli_free_resources(sc);
error = 0;
out:
return(error);
}
/*
* Function name: twa_shutdown
* Description: Called at unload/shutdown time. Lets the controller
* know that we are going down.
*
* Input: dev -- bus device corresponding to the ctlr
* Output: None
* Return value: 0 -- success
* non-zero-- failure
*/
static TW_INT32
twa_shutdown(device_t dev)
{
struct twa_softc *sc = device_get_softc(dev);
TW_INT32 error = 0;
tw_osli_dbg_dprintf(3, sc, "entered");
/* Disconnect interrupts. */
error = twa_teardown_intr(sc);
/* Stop watchdog task. */
callout_drain(&(sc->watchdog_callout[0]));
callout_drain(&(sc->watchdog_callout[1]));
/* Disconnect from the controller. */
if ((error = tw_cl_shutdown_ctlr(&(sc->ctlr_handle), 0))) {
tw_osli_printf(sc, "error = %d",
TW_CL_SEVERITY_ERROR_STRING,
TW_CL_MESSAGE_SOURCE_FREEBSD_DRIVER,
0x2015,
"Failed to shutdown Common Layer/controller",
error);
}
return(error);
}
/*
* Function name: tw_osl_scan_bus
* Description: CL calls this function to request for a bus scan.
*
* Input: ctlr_handle -- ptr to controller handle
* Output: None
* Return value: None
*/
TW_VOID
tw_osl_scan_bus(struct tw_cl_ctlr_handle *ctlr_handle)
{
struct twa_softc *sc = ctlr_handle->osl_ctlr_ctxt;
TW_INT32 error;
if ((error = tw_osli_request_bus_scan(sc)))
tw_osli_printf(sc, "error = %d",
TW_CL_SEVERITY_ERROR_STRING,
TW_CL_MESSAGE_SOURCE_FREEBSD_DRIVER,
0x2109,
"Bus scan request to CAM failed",
error);
}
/*
* Function name: tw_osli_fw_passthru
* Description: Builds a fw passthru cmd pkt, and submits it to CL.
*
* Input: sc -- ptr to OSL internal ctlr context
* buf -- ptr to ioctl pkt understood by CL
* Output: None
* Return value: 0 -- success
* non-zero-- failure
*/
TW_INT32
tw_osli_fw_passthru(struct twa_softc *sc, TW_INT8 *buf)
{
struct tw_osli_req_context *req;
struct tw_osli_ioctl_no_data_buf *user_buf =
(struct tw_osli_ioctl_no_data_buf *)buf;
TW_TIME end_time;
TW_UINT32 timeout = 60;
TW_UINT32 data_buf_size_adjusted;
struct tw_cl_req_packet *req_pkt;
struct tw_cl_passthru_req_packet *pt_req;
TW_INT32 error;
tw_osli_dbg_dprintf(5, sc, "ioctl: passthru");
if ((req = tw_osli_get_request(sc)) == NULL)
return(EBUSY);
req->req_handle.osl_req_ctxt = req;
req->orig_req = buf;
req->flags |= TW_OSLI_REQ_FLAGS_PASSTHRU;
req_pkt = &(req->req_pkt);
req_pkt->status = 0;
req_pkt->tw_osl_callback = tw_osl_complete_passthru;
/* Let the Common Layer retry the request on cmd queue full. */
req_pkt->flags |= TW_CL_REQ_RETRY_ON_BUSY;
pt_req = &(req_pkt->gen_req_pkt.pt_req);
/*
* Make sure that the data buffer sent to firmware is a
* 512 byte multiple in size.
*/
data_buf_size_adjusted =
(user_buf->driver_pkt.buffer_length +
(sc->sg_size_factor - 1)) & ~(sc->sg_size_factor - 1);
if ((req->length = data_buf_size_adjusted)) {
if ((req->data = malloc(data_buf_size_adjusted,
TW_OSLI_MALLOC_CLASS, M_WAITOK)) == NULL) {
error = ENOMEM;
tw_osli_printf(sc, "error = %d",
TW_CL_SEVERITY_ERROR_STRING,
TW_CL_MESSAGE_SOURCE_FREEBSD_DRIVER,
0x2016,
"Could not alloc mem for "
"fw_passthru data_buf",
error);
goto fw_passthru_err;
}
/* Copy the payload. */
if ((error = copyin((TW_VOID *)(user_buf->pdata),
req->data,
user_buf->driver_pkt.buffer_length)) != 0) {
tw_osli_printf(sc, "error = %d",
TW_CL_SEVERITY_ERROR_STRING,
TW_CL_MESSAGE_SOURCE_FREEBSD_DRIVER,
0x2017,
"Could not copyin fw_passthru data_buf",
error);
goto fw_passthru_err;
}
pt_req->sgl_entries = 1; /* will be updated during mapping */
req->flags |= (TW_OSLI_REQ_FLAGS_DATA_IN |
TW_OSLI_REQ_FLAGS_DATA_OUT);
} else
pt_req->sgl_entries = 0; /* no payload */
pt_req->cmd_pkt = (TW_VOID *)(&(user_buf->cmd_pkt));
pt_req->cmd_pkt_length = sizeof(struct tw_cl_command_packet);
if ((error = tw_osli_map_request(req)))
goto fw_passthru_err;
end_time = tw_osl_get_local_time() + timeout;
while (req->state != TW_OSLI_REQ_STATE_COMPLETE) {
mtx_lock(req->ioctl_wake_timeout_lock);
req->flags |= TW_OSLI_REQ_FLAGS_SLEEPING;
error = mtx_sleep(req, req->ioctl_wake_timeout_lock, 0,
"twa_passthru", timeout*hz);
mtx_unlock(req->ioctl_wake_timeout_lock);
if (!(req->flags & TW_OSLI_REQ_FLAGS_SLEEPING))
error = 0;
req->flags &= ~TW_OSLI_REQ_FLAGS_SLEEPING;
if (! error) {
if (((error = req->error_code)) ||
((error = (req->state !=
TW_OSLI_REQ_STATE_COMPLETE))) ||
((error = req_pkt->status)))
goto fw_passthru_err;
break;
}
if (req_pkt->status) {
error = req_pkt->status;
goto fw_passthru_err;
}
if (error == EWOULDBLOCK) {
/* Time out! */
if ((!(req->error_code)) &&
(req->state == TW_OSLI_REQ_STATE_COMPLETE) &&
(!(req_pkt->status)) ) {
#ifdef TW_OSL_DEBUG
tw_osli_printf(sc, "request = %p",
TW_CL_SEVERITY_ERROR_STRING,
TW_CL_MESSAGE_SOURCE_FREEBSD_DRIVER,
0x7777,
"FALSE Passthru timeout!",
req);
#endif /* TW_OSL_DEBUG */
error = 0; /* False error */
break;
}
if (!(tw_cl_is_reset_needed(&(req->ctlr->ctlr_handle)))) {
#ifdef TW_OSL_DEBUG
tw_osli_printf(sc, "request = %p",
TW_CL_SEVERITY_ERROR_STRING,
TW_CL_MESSAGE_SOURCE_FREEBSD_DRIVER,
0x2018,
"Passthru request timed out!",
req);
#else /* TW_OSL_DEBUG */
device_printf((sc)->bus_dev, "Passthru request timed out!\n");
#endif /* TW_OSL_DEBUG */
tw_cl_reset_ctlr(&(req->ctlr->ctlr_handle));
}
error = 0;
end_time = tw_osl_get_local_time() + timeout;
continue;
/*
* Don't touch req after a reset. It (and any
* associated data) will be
* unmapped by the callback.
*/
}
/*
* Either the request got completed, or we were woken up by a
* signal. Calculate the new timeout, in case it was the latter.
*/
timeout = (end_time - tw_osl_get_local_time());
} /* End of while loop */
/* If there was a payload, copy it back. */
if ((!error) && (req->length))
if ((error = copyout(req->data, user_buf->pdata,
user_buf->driver_pkt.buffer_length)))
tw_osli_printf(sc, "error = %d",
TW_CL_SEVERITY_ERROR_STRING,
TW_CL_MESSAGE_SOURCE_FREEBSD_DRIVER,
0x2019,
"Could not copyout fw_passthru data_buf",
error);
fw_passthru_err:
if (req_pkt->status == TW_CL_ERR_REQ_BUS_RESET)
error = EBUSY;
user_buf->driver_pkt.os_status = error;
/* Free resources. */
if (req->data)
free(req->data, TW_OSLI_MALLOC_CLASS);
tw_osli_req_q_insert_tail(req, TW_OSLI_FREE_Q);
return(error);
}
/*
* Function name: tw_osli_alloc_mem
* Description: Allocates memory needed both by CL and OSL.
*
* Input: sc -- OSL internal controller context
* Output: None
* Return value: 0 -- success
* non-zero-- failure
*/
static TW_INT32
tw_osli_alloc_mem(struct twa_softc *sc)
{
struct tw_osli_req_context *req;
TW_UINT32 max_sg_elements;
TW_UINT32 non_dma_mem_size;
TW_UINT32 dma_mem_size;
TW_INT32 error;
TW_INT32 i;
tw_osli_dbg_dprintf(3, sc, "entered");
sc->flags |= (sizeof(bus_addr_t) == 8) ? TW_CL_64BIT_ADDRESSES : 0;
sc->flags |= (sizeof(bus_size_t) == 8) ? TW_CL_64BIT_SG_LENGTH : 0;
max_sg_elements = (sizeof(bus_addr_t) == 8) ?
TW_CL_MAX_64BIT_SG_ELEMENTS : TW_CL_MAX_32BIT_SG_ELEMENTS;
if ((error = tw_cl_get_mem_requirements(&sc->ctlr_handle, sc->flags,
sc->device_id, TW_OSLI_MAX_NUM_REQUESTS, TW_OSLI_MAX_NUM_AENS,
&(sc->alignment), &(sc->sg_size_factor),
&non_dma_mem_size, &dma_mem_size
))) {
tw_osli_printf(sc, "error = %d",
TW_CL_SEVERITY_ERROR_STRING,
TW_CL_MESSAGE_SOURCE_FREEBSD_DRIVER,
0x2008,
"Can't get Common Layer's memory requirements",
error);
return(error);
}
if ((sc->non_dma_mem = malloc(non_dma_mem_size, TW_OSLI_MALLOC_CLASS,
M_WAITOK)) == NULL) {
tw_osli_printf(sc, "error = %d",
TW_CL_SEVERITY_ERROR_STRING,
TW_CL_MESSAGE_SOURCE_FREEBSD_DRIVER,
0x2009,
"Can't allocate non-dma memory",
ENOMEM);
return(ENOMEM);
}
/* Create the parent dma tag. */
if (bus_dma_tag_create(bus_get_dma_tag(sc->bus_dev), /* parent */
sc->alignment, /* alignment */
0, /* boundary */
BUS_SPACE_MAXADDR, /* lowaddr */
BUS_SPACE_MAXADDR, /* highaddr */
NULL, NULL, /* filter, filterarg */
TW_CL_MAX_IO_SIZE, /* maxsize */
max_sg_elements, /* nsegments */
TW_CL_MAX_IO_SIZE, /* maxsegsize */
0, /* flags */
NULL, /* lockfunc */
NULL, /* lockfuncarg */
&sc->parent_tag /* tag */)) {
tw_osli_printf(sc, "error = %d",
TW_CL_SEVERITY_ERROR_STRING,
TW_CL_MESSAGE_SOURCE_FREEBSD_DRIVER,
0x200A,
"Can't allocate parent DMA tag",
ENOMEM);
return(ENOMEM);
}
/* Create a dma tag for Common Layer's DMA'able memory (dma_mem). */
if (bus_dma_tag_create(sc->parent_tag, /* parent */
sc->alignment, /* alignment */
0, /* boundary */
BUS_SPACE_MAXADDR, /* lowaddr */
BUS_SPACE_MAXADDR, /* highaddr */
NULL, NULL, /* filter, filterarg */
dma_mem_size, /* maxsize */
1, /* nsegments */
BUS_SPACE_MAXSIZE, /* maxsegsize */
0, /* flags */
NULL, /* lockfunc */
NULL, /* lockfuncarg */
&sc->cmd_tag /* tag */)) {
tw_osli_printf(sc, "error = %d",
TW_CL_SEVERITY_ERROR_STRING,
TW_CL_MESSAGE_SOURCE_FREEBSD_DRIVER,
0x200B,
"Can't allocate DMA tag for Common Layer's "
"DMA'able memory",
ENOMEM);
return(ENOMEM);
}
if (bus_dmamem_alloc(sc->cmd_tag, &sc->dma_mem,
BUS_DMA_NOWAIT, &sc->cmd_map)) {
/* Try a second time. */
if (bus_dmamem_alloc(sc->cmd_tag, &sc->dma_mem,
BUS_DMA_NOWAIT, &sc->cmd_map)) {
tw_osli_printf(sc, "error = %d",
TW_CL_SEVERITY_ERROR_STRING,
TW_CL_MESSAGE_SOURCE_FREEBSD_DRIVER,
0x200C,
"Can't allocate DMA'able memory for the"
"Common Layer",
ENOMEM);
return(ENOMEM);
}
}
bus_dmamap_load(sc->cmd_tag, sc->cmd_map, sc->dma_mem,
dma_mem_size, twa_map_load_callback,
&sc->dma_mem_phys, 0);
/*
* Create a dma tag for data buffers; size will be the maximum
* possible I/O size (128kB).
*/
if (bus_dma_tag_create(sc->parent_tag, /* parent */
sc->alignment, /* alignment */
0, /* boundary */
BUS_SPACE_MAXADDR, /* lowaddr */
BUS_SPACE_MAXADDR, /* highaddr */
NULL, NULL, /* filter, filterarg */
TW_CL_MAX_IO_SIZE, /* maxsize */
max_sg_elements, /* nsegments */
TW_CL_MAX_IO_SIZE, /* maxsegsize */
BUS_DMA_ALLOCNOW, /* flags */
twa_busdma_lock, /* lockfunc */
sc->io_lock, /* lockfuncarg */
&sc->dma_tag /* tag */)) {
tw_osli_printf(sc, "error = %d",
TW_CL_SEVERITY_ERROR_STRING,
TW_CL_MESSAGE_SOURCE_FREEBSD_DRIVER,
0x200F,
"Can't allocate DMA tag for data buffers",
ENOMEM);
return(ENOMEM);
}
/*
* Create a dma tag for ioctl data buffers; size will be the maximum
* possible I/O size (128kB).
*/
if (bus_dma_tag_create(sc->parent_tag, /* parent */
sc->alignment, /* alignment */
0, /* boundary */
BUS_SPACE_MAXADDR, /* lowaddr */
BUS_SPACE_MAXADDR, /* highaddr */
NULL, NULL, /* filter, filterarg */
TW_CL_MAX_IO_SIZE, /* maxsize */
max_sg_elements, /* nsegments */
TW_CL_MAX_IO_SIZE, /* maxsegsize */
BUS_DMA_ALLOCNOW, /* flags */
twa_busdma_lock, /* lockfunc */
sc->io_lock, /* lockfuncarg */
&sc->ioctl_tag /* tag */)) {
tw_osli_printf(sc, "error = %d",
TW_CL_SEVERITY_ERROR_STRING,
TW_CL_MESSAGE_SOURCE_FREEBSD_DRIVER,
0x2010,
"Can't allocate DMA tag for ioctl data buffers",
ENOMEM);
return(ENOMEM);
}
/* Create just one map for all ioctl request data buffers. */
if (bus_dmamap_create(sc->ioctl_tag, 0, &sc->ioctl_map)) {
tw_osli_printf(sc, "error = %d",
TW_CL_SEVERITY_ERROR_STRING,
TW_CL_MESSAGE_SOURCE_FREEBSD_DRIVER,
0x2011,
"Can't create ioctl map",
ENOMEM);
return(ENOMEM);
}
/* Initialize request queues. */
tw_osli_req_q_init(sc, TW_OSLI_FREE_Q);
tw_osli_req_q_init(sc, TW_OSLI_BUSY_Q);
if ((sc->req_ctx_buf = (struct tw_osli_req_context *)
malloc((sizeof(struct tw_osli_req_context) *
TW_OSLI_MAX_NUM_REQUESTS),
TW_OSLI_MALLOC_CLASS, M_WAITOK)) == NULL) {
tw_osli_printf(sc, "error = %d",
TW_CL_SEVERITY_ERROR_STRING,
TW_CL_MESSAGE_SOURCE_FREEBSD_DRIVER,
0x2012,
"Failed to allocate request packets",
ENOMEM);
return(ENOMEM);
}
bzero(sc->req_ctx_buf,
sizeof(struct tw_osli_req_context) * TW_OSLI_MAX_NUM_REQUESTS);
for (i = 0; i < TW_OSLI_MAX_NUM_REQUESTS; i++) {
req = &(sc->req_ctx_buf[i]);
req->ctlr = sc;
if (bus_dmamap_create(sc->dma_tag, 0, &req->dma_map)) {
tw_osli_printf(sc, "request # = %d, error = %d",
TW_CL_SEVERITY_ERROR_STRING,
TW_CL_MESSAGE_SOURCE_FREEBSD_DRIVER,
0x2013,
"Can't create dma map",
i, ENOMEM);
return(ENOMEM);
}
/* Initialize the ioctl wakeup/ timeout mutex */
req->ioctl_wake_timeout_lock = &(req->ioctl_wake_timeout_lock_handle);
mtx_init(req->ioctl_wake_timeout_lock, "tw_ioctl_wake_timeout_lock", NULL, MTX_DEF);
/* Insert request into the free queue. */
tw_osli_req_q_insert_tail(req, TW_OSLI_FREE_Q);
}
return(0);
}
/*
* Function name: twa_attach
* Description: Allocates pci resources; updates sc; adds a node to the
* sysctl tree to expose the driver version; makes calls
* (to the Common Layer) to initialize ctlr, and to
* attach to CAM.
*
* Input: dev -- bus device corresponding to the ctlr
* Output: None
* Return value: 0 -- success
* non-zero-- failure
*/
static TW_INT32
twa_attach(device_t dev)
{
struct twa_softc *sc = device_get_softc(dev);
TW_UINT32 command;
TW_INT32 bar_num;
TW_INT32 bar0_offset;
TW_INT32 bar_size;
TW_INT32 error;
tw_osli_dbg_dprintf(3, sc, "entered");
sc->ctlr_handle.osl_ctlr_ctxt = sc;
/* Initialize the softc structure. */
sc->bus_dev = dev;
sc->device_id = pci_get_device(dev);
/* Initialize the mutexes right here. */
sc->io_lock = &(sc->io_lock_handle);
mtx_init(sc->io_lock, "tw_osl_io_lock", NULL, MTX_SPIN);
sc->q_lock = &(sc->q_lock_handle);
mtx_init(sc->q_lock, "tw_osl_q_lock", NULL, MTX_SPIN);
sc->sim_lock = &(sc->sim_lock_handle);
mtx_init(sc->sim_lock, "tw_osl_sim_lock", NULL, MTX_DEF | MTX_RECURSE);
sysctl_ctx_init(&sc->sysctl_ctxt);
sc->sysctl_tree = SYSCTL_ADD_NODE(&sc->sysctl_ctxt,
SYSCTL_STATIC_CHILDREN(_hw), OID_AUTO,
device_get_nameunit(dev), CTLFLAG_RD, 0, "");
if (sc->sysctl_tree == NULL) {
tw_osli_printf(sc, "error = %d",
TW_CL_SEVERITY_ERROR_STRING,
TW_CL_MESSAGE_SOURCE_FREEBSD_DRIVER,
0x2000,
"Cannot add sysctl tree node",
ENXIO);
return(ENXIO);
}
SYSCTL_ADD_STRING(&sc->sysctl_ctxt, SYSCTL_CHILDREN(sc->sysctl_tree),
OID_AUTO, "driver_version", CTLFLAG_RD,
TW_OSL_DRIVER_VERSION_STRING, 0, "TWA driver version");
/* Make sure we are going to be able to talk to this board. */
command = pci_read_config(dev, PCIR_COMMAND, 2);
if ((command & PCIM_CMD_PORTEN) == 0) {
tw_osli_printf(sc, "error = %d",
TW_CL_SEVERITY_ERROR_STRING,
TW_CL_MESSAGE_SOURCE_FREEBSD_DRIVER,
0x2001,
"Register window not available",
ENXIO);
tw_osli_free_resources(sc);
return(ENXIO);
}
/* Force the busmaster enable bit on, in case the BIOS forgot. */
command |= PCIM_CMD_BUSMASTEREN;
pci_write_config(dev, PCIR_COMMAND, command, 2);
/* Allocate the PCI register window. */
if ((error = tw_cl_get_pci_bar_info(sc->device_id, TW_CL_BAR_TYPE_MEM,
&bar_num, &bar0_offset, &bar_size))) {
tw_osli_printf(sc, "error = %d",
TW_CL_SEVERITY_ERROR_STRING,
TW_CL_MESSAGE_SOURCE_FREEBSD_DRIVER,
0x201F,
"Can't get PCI BAR info",
error);
tw_osli_free_resources(sc);
return(error);
}
sc->reg_res_id = PCIR_BARS + bar0_offset;
if ((sc->reg_res = bus_alloc_resource(dev, SYS_RES_MEMORY,
&(sc->reg_res_id), 0, ~0, 1, RF_ACTIVE))
== NULL) {
tw_osli_printf(sc, "error = %d",
TW_CL_SEVERITY_ERROR_STRING,
TW_CL_MESSAGE_SOURCE_FREEBSD_DRIVER,
0x2002,
"Can't allocate register window",
ENXIO);
tw_osli_free_resources(sc);
return(ENXIO);
}
sc->bus_tag = rman_get_bustag(sc->reg_res);
sc->bus_handle = rman_get_bushandle(sc->reg_res);
/* Allocate and register our interrupt. */
sc->irq_res_id = 0;
if ((sc->irq_res = bus_alloc_resource(sc->bus_dev, SYS_RES_IRQ,
&(sc->irq_res_id), 0, ~0, 1,
RF_SHAREABLE | RF_ACTIVE)) == NULL) {
tw_osli_printf(sc, "error = %d",
TW_CL_SEVERITY_ERROR_STRING,
TW_CL_MESSAGE_SOURCE_FREEBSD_DRIVER,
0x2003,
"Can't allocate interrupt",
ENXIO);
tw_osli_free_resources(sc);
return(ENXIO);
}
if ((error = twa_setup_intr(sc))) {
tw_osli_printf(sc, "error = %d",
TW_CL_SEVERITY_ERROR_STRING,
TW_CL_MESSAGE_SOURCE_FREEBSD_DRIVER,
0x2004,
"Can't set up interrupt",
error);
tw_osli_free_resources(sc);
return(error);
}
if ((error = tw_osli_alloc_mem(sc))) {
tw_osli_printf(sc, "error = %d",
TW_CL_SEVERITY_ERROR_STRING,
TW_CL_MESSAGE_SOURCE_FREEBSD_DRIVER,
0x2005,
"Memory allocation failure",
error);
tw_osli_free_resources(sc);
return(error);
}
/* Initialize the Common Layer for this controller. */
if ((error = tw_cl_init_ctlr(&sc->ctlr_handle, sc->flags, sc->device_id,
TW_OSLI_MAX_NUM_REQUESTS, TW_OSLI_MAX_NUM_AENS,
sc->non_dma_mem, sc->dma_mem,
sc->dma_mem_phys
))) {
tw_osli_printf(sc, "error = %d",
TW_CL_SEVERITY_ERROR_STRING,
TW_CL_MESSAGE_SOURCE_FREEBSD_DRIVER,
0x2006,
"Failed to initialize Common Layer/controller",
error);
tw_osli_free_resources(sc);
return(error);
}
/* Create the control device. */
sc->ctrl_dev = make_dev(&twa_cdevsw, device_get_unit(sc->bus_dev),
UID_ROOT, GID_OPERATOR, S_IRUSR | S_IWUSR,
"twa%d", device_get_unit(sc->bus_dev));
sc->ctrl_dev->si_drv1 = sc;
if ((error = tw_osli_cam_attach(sc))) {
tw_osli_free_resources(sc);
tw_osli_printf(sc, "error = %d",
TW_CL_SEVERITY_ERROR_STRING,
TW_CL_MESSAGE_SOURCE_FREEBSD_DRIVER,
0x2007,
"Failed to initialize CAM",
error);
return(error);
}
sc->watchdog_index = 0;
callout_init(&(sc->watchdog_callout[0]), CALLOUT_MPSAFE);
callout_init(&(sc->watchdog_callout[1]), CALLOUT_MPSAFE);
callout_reset(&(sc->watchdog_callout[0]), 5*hz, twa_watchdog, &sc->ctlr_handle);
return(0);
}
/*
* Function name: tw_osli_map_request
* Description: Maps a cmd pkt and data associated with it, into
* DMA'able memory.
*
* Input: req -- ptr to request pkt
* Output: None
* Return value: 0 -- success
* non-zero-- failure
*/
TW_INT32
tw_osli_map_request(struct tw_osli_req_context *req)
{
struct twa_softc *sc = req->ctlr;
TW_INT32 error = 0;
tw_osli_dbg_dprintf(10, sc, "entered");
/* If the command involves data, map that too. */
if (req->data != NULL) {
/*
* It's sufficient for the data pointer to be 4-byte aligned
* to work with 9000. However, if 4-byte aligned addresses
* are passed to bus_dmamap_load, we can get back sg elements
* that are not 512-byte multiples in size. So, we will let
* only those buffers that are 512-byte aligned to pass
* through, and bounce the rest, so as to make sure that we
* always get back sg elements that are 512-byte multiples
* in size.
*/
if (((vm_offset_t)req->data % sc->sg_size_factor) ||
(req->length % sc->sg_size_factor)) {
req->flags |= TW_OSLI_REQ_FLAGS_DATA_COPY_NEEDED;
/* Save original data pointer and length. */
req->real_data = req->data;
req->real_length = req->length;
req->length = (req->length +
(sc->sg_size_factor - 1)) &
~(sc->sg_size_factor - 1);
req->data = malloc(req->length, TW_OSLI_MALLOC_CLASS,
M_NOWAIT);
if (req->data == NULL) {
tw_osli_printf(sc, "error = %d",
TW_CL_SEVERITY_ERROR_STRING,
TW_CL_MESSAGE_SOURCE_FREEBSD_DRIVER,
0x201E,
"Failed to allocate memory "
"for bounce buffer",
ENOMEM);
/* Restore original data pointer and length. */
req->data = req->real_data;
req->length = req->real_length;
return(ENOMEM);
}
}
/*
* Map the data buffer into bus space and build the SG list.
*/
if (req->flags & TW_OSLI_REQ_FLAGS_PASSTHRU) {
/* Lock against multiple simultaneous ioctl calls. */
mtx_lock_spin(sc->io_lock);
error = bus_dmamap_load(sc->ioctl_tag, sc->ioctl_map,
req->data, req->length,
twa_map_load_data_callback, req,
BUS_DMA_WAITOK);
mtx_unlock_spin(sc->io_lock);
} else if (req->flags & TW_OSLI_REQ_FLAGS_CCB) {
error = bus_dmamap_load_ccb(sc->dma_tag, req->dma_map,
req->orig_req, twa_map_load_data_callback, req,
BUS_DMA_WAITOK);
} else {
/*
* There's only one CAM I/O thread running at a time.
* So, there's no need to hold the io_lock.
*/
error = bus_dmamap_load(sc->dma_tag, req->dma_map,
req->data, req->length,
twa_map_load_data_callback, req,
BUS_DMA_WAITOK);
}
if (!error)
error = req->error_code;
else {
if (error == EINPROGRESS) {
/*
* Specifying sc->io_lock as the lockfuncarg
* in ...tag_create should protect the access
* of ...FLAGS_MAPPED from the callback.
*/
mtx_lock_spin(sc->io_lock);
if (!(req->flags & TW_OSLI_REQ_FLAGS_MAPPED))
req->flags |= TW_OSLI_REQ_FLAGS_IN_PROGRESS;
tw_osli_disallow_new_requests(sc, &(req->req_handle));
mtx_unlock_spin(sc->io_lock);
error = 0;
} else {
tw_osli_printf(sc, "error = %d",
TW_CL_SEVERITY_ERROR_STRING,
TW_CL_MESSAGE_SOURCE_FREEBSD_DRIVER,
0x9999,
"Failed to map DMA memory "
"for I/O request",
error);
req->flags |= TW_OSLI_REQ_FLAGS_FAILED;
/* Free alignment buffer if it was used. */
if (req->flags &
TW_OSLI_REQ_FLAGS_DATA_COPY_NEEDED) {
free(req->data, TW_OSLI_MALLOC_CLASS);
/*
* Restore original data pointer
* and length.
*/
req->data = req->real_data;
req->length = req->real_length;
}
}
}
} else {
/* Mark the request as currently being processed. */
req->state = TW_OSLI_REQ_STATE_BUSY;
/* Move the request into the busy queue. */
tw_osli_req_q_insert_tail(req, TW_OSLI_BUSY_Q);
if (req->flags & TW_OSLI_REQ_FLAGS_PASSTHRU)
error = tw_cl_fw_passthru(&sc->ctlr_handle,
&(req->req_pkt), &(req->req_handle));
else
error = tw_cl_start_io(&sc->ctlr_handle,
&(req->req_pkt), &(req->req_handle));
if (error) {
req->error_code = error;
req->req_pkt.tw_osl_callback(&(req->req_handle));
}
}
return(error);
}
/*
* Function name: tw_osl_complete_passthru
* Description: Called to complete passthru requests.
*
* Input: req_handle -- ptr to request handle
* Output: None
* Return value: None
*/
TW_VOID
tw_osl_complete_passthru(struct tw_cl_req_handle *req_handle)
{
struct tw_osli_req_context *req = req_handle->osl_req_ctxt;
struct tw_cl_req_packet *req_pkt =
(struct tw_cl_req_packet *)(&req->req_pkt);
struct twa_softc *sc = req->ctlr;
tw_osli_dbg_dprintf(5, sc, "entered");
if (req->state != TW_OSLI_REQ_STATE_BUSY) {
tw_osli_printf(sc, "request = %p, status = %d",
TW_CL_SEVERITY_ERROR_STRING,
TW_CL_MESSAGE_SOURCE_FREEBSD_DRIVER,
0x201B,
"Unposted command completed!!",
req, req->state);
}
/*
* Remove request from the busy queue. Just mark it complete.
* There's no need to move it into the complete queue as we are
* going to be done with it right now.
*/
req->state = TW_OSLI_REQ_STATE_COMPLETE;
tw_osli_req_q_remove_item(req, TW_OSLI_BUSY_Q);
tw_osli_unmap_request(req);
/*
* Don't do a wake up if there was an error even before the request
* was sent down to the Common Layer, and we hadn't gotten an
* EINPROGRESS. The request originator will then be returned an
* error, and he can do the clean-up.
*/
if ((req->error_code) && (!(req->flags & TW_OSLI_REQ_FLAGS_IN_PROGRESS)))
return;
if (req->flags & TW_OSLI_REQ_FLAGS_PASSTHRU) {
if (req->flags & TW_OSLI_REQ_FLAGS_SLEEPING) {
/* Wake up the sleeping command originator. */
tw_osli_dbg_dprintf(5, sc,
"Waking up originator of request %p", req);
req->flags &= ~TW_OSLI_REQ_FLAGS_SLEEPING;
wakeup_one(req);
} else {
/*
* If the request completed even before mtx_sleep
* was called, simply return.
*/
if (req->flags & TW_OSLI_REQ_FLAGS_MAPPED)
return;
if (req_pkt->status == TW_CL_ERR_REQ_BUS_RESET)
return;
tw_osli_printf(sc, "request = %p",
TW_CL_SEVERITY_ERROR_STRING,
TW_CL_MESSAGE_SOURCE_FREEBSD_DRIVER,
0x201C,
"Passthru callback called, "
"and caller not sleeping",
req);
}
} else {
tw_osli_printf(sc, "request = %p",
TW_CL_SEVERITY_ERROR_STRING,
TW_CL_MESSAGE_SOURCE_FREEBSD_DRIVER,
0x201D,
"Passthru callback called for non-passthru request",
req);
}
}
/*
* Function name: tw_osli_cam_attach
* Description: Attaches the driver to CAM.
*
* Input: sc -- ptr to OSL internal ctlr context
* Output: None
* Return value: 0 -- success
* non-zero-- failure
*/
TW_INT32
tw_osli_cam_attach(struct twa_softc *sc)
{
struct cam_devq *devq;
tw_osli_dbg_dprintf(3, sc, "entered");
/*
* Create the device queue for our SIM.
*/
if ((devq = cam_simq_alloc(TW_OSLI_MAX_NUM_IOS)) == NULL) {
tw_osli_printf(sc, "error = %d",
TW_CL_SEVERITY_ERROR_STRING,
TW_CL_MESSAGE_SOURCE_FREEBSD_DRIVER,
0x2100,
"Failed to create SIM device queue",
ENOMEM);
return(ENOMEM);
}
/*
* Create a SIM entry. Though we can support TW_OSLI_MAX_NUM_REQUESTS
* simultaneous requests, we claim to be able to handle only
* TW_OSLI_MAX_NUM_IOS (two less), so that we always have a request
* packet available to service ioctls and AENs.
*/
tw_osli_dbg_dprintf(3, sc, "Calling cam_sim_alloc");
sc->sim = cam_sim_alloc(twa_action, twa_poll, "twa", sc,
device_get_unit(sc->bus_dev), sc->sim_lock,
TW_OSLI_MAX_NUM_IOS, 1, devq);
if (sc->sim == NULL) {
cam_simq_free(devq);
tw_osli_printf(sc, "error = %d",
TW_CL_SEVERITY_ERROR_STRING,
TW_CL_MESSAGE_SOURCE_FREEBSD_DRIVER,
0x2101,
"Failed to create a SIM entry",
ENOMEM);
return(ENOMEM);
}
/*
* Register the bus.
*/
tw_osli_dbg_dprintf(3, sc, "Calling xpt_bus_register");
mtx_lock(sc->sim_lock);
if (xpt_bus_register(sc->sim, sc->bus_dev, 0) != CAM_SUCCESS) {
cam_sim_free(sc->sim, TRUE);
sc->sim = NULL; /* so cam_detach will not try to free it */
tw_osli_printf(sc, "error = %d",
TW_CL_SEVERITY_ERROR_STRING,
TW_CL_MESSAGE_SOURCE_FREEBSD_DRIVER,
0x2102,
"Failed to register the bus",
ENXIO);
mtx_unlock(sc->sim_lock);
return(ENXIO);
}
tw_osli_dbg_dprintf(3, sc, "Calling xpt_create_path");
if (xpt_create_path(&sc->path, NULL,
cam_sim_path(sc->sim),
CAM_TARGET_WILDCARD,
CAM_LUN_WILDCARD) != CAM_REQ_CMP) {
xpt_bus_deregister(cam_sim_path (sc->sim));
/* Passing TRUE to cam_sim_free will free the devq as well. */
cam_sim_free(sc->sim, TRUE);
tw_osli_printf(sc, "error = %d",
TW_CL_SEVERITY_ERROR_STRING,
TW_CL_MESSAGE_SOURCE_FREEBSD_DRIVER,
0x2103,
"Failed to create path",
ENXIO);
mtx_unlock(sc->sim_lock);
return(ENXIO);
}
mtx_unlock(sc->sim_lock);
tw_osli_dbg_dprintf(3, sc, "exiting");
return(0);
}
/*
* Function name: tw_osl_complete_io
* Description: Called to complete CAM scsi requests.
*
* Input: req_handle -- ptr to request handle
* Output: None
* Return value: None
*/
TW_VOID
tw_osl_complete_io(struct tw_cl_req_handle *req_handle)
{
struct tw_osli_req_context *req = req_handle->osl_req_ctxt;
struct tw_cl_req_packet *req_pkt =
(struct tw_cl_req_packet *)(&req->req_pkt);
struct tw_cl_scsi_req_packet *scsi_req;
struct twa_softc *sc = req->ctlr;
union ccb *ccb = (union ccb *)(req->orig_req);
tw_osli_dbg_dprintf(10, sc, "entering");
if (req->state != TW_OSLI_REQ_STATE_BUSY)
tw_osli_printf(sc, "request = %p, status = %d",
TW_CL_SEVERITY_ERROR_STRING,
TW_CL_MESSAGE_SOURCE_FREEBSD_DRIVER,
0x210A,
"Unposted command completed!!",
req, req->state);
/*
* Remove request from the busy queue. Just mark it complete.
* There's no need to move it into the complete queue as we are
* going to be done with it right now.
*/
req->state = TW_OSLI_REQ_STATE_COMPLETE;
tw_osli_req_q_remove_item(req, TW_OSLI_BUSY_Q);
tw_osli_unmap_request(req);
req->deadline = 0;
if (req->error_code) {
/* This request never got submitted to the firmware. */
if (req->error_code == EBUSY) {
/*
* Cmd queue is full, or the Common Layer is out of
* resources. The simq will already have been frozen.
* When this ccb gets completed will unfreeze the simq.
*/
ccb->ccb_h.status |= CAM_REQUEUE_REQ;
}
else if (req->error_code == EFBIG)
ccb->ccb_h.status = CAM_REQ_TOO_BIG;
else
ccb->ccb_h.status = CAM_REQ_CMP_ERR;
} else {
scsi_req = &(req_pkt->gen_req_pkt.scsi_req);
if (req_pkt->status == TW_CL_ERR_REQ_SUCCESS)
ccb->ccb_h.status = CAM_REQ_CMP;
else {
if (req_pkt->status & TW_CL_ERR_REQ_INVALID_TARGET)
ccb->ccb_h.status |= CAM_SEL_TIMEOUT;
else if (req_pkt->status & TW_CL_ERR_REQ_INVALID_LUN)
ccb->ccb_h.status |= CAM_DEV_NOT_THERE;
else if (req_pkt->status & TW_CL_ERR_REQ_SCSI_ERROR)
ccb->ccb_h.status |= CAM_SCSI_STATUS_ERROR;
else if (req_pkt->status & TW_CL_ERR_REQ_BUS_RESET)
ccb->ccb_h.status |= (CAM_REQUEUE_REQ | CAM_SCSI_BUS_RESET);
/*
* If none of the above errors occurred, simply
* mark completion error.
*/
if (ccb->ccb_h.status == 0)
ccb->ccb_h.status = CAM_REQ_CMP_ERR;
if (req_pkt->status & TW_CL_ERR_REQ_AUTO_SENSE_VALID) {
ccb->csio.sense_len = scsi_req->sense_len;
ccb->ccb_h.status |= CAM_AUTOSNS_VALID;
}
}
ccb->csio.scsi_status = scsi_req->scsi_status;
}
ccb->ccb_h.status &= ~CAM_SIM_QUEUED;
mtx_lock(sc->sim_lock);
xpt_done(ccb);
mtx_unlock(sc->sim_lock);
if (! req->error_code)
/* twa_action will free the request otherwise */
tw_osli_req_q_insert_tail(req, TW_OSLI_FREE_Q);
}
/*
* Function name: tw_osli_execute_scsi
* Description: Build a fw cmd, based on a CAM style ccb, and
* send it down.
*
* Input: req -- ptr to OSL internal request context
* ccb -- ptr to CAM style ccb
* Output: None
* Return value: 0 -- success
* non-zero-- failure
*/
TW_INT32
tw_osli_execute_scsi(struct tw_osli_req_context *req, union ccb *ccb)
{
struct twa_softc *sc = req->ctlr;
struct tw_cl_req_packet *req_pkt;
struct tw_cl_scsi_req_packet *scsi_req;
struct ccb_hdr *ccb_h = &(ccb->ccb_h);
struct ccb_scsiio *csio = &(ccb->csio);
TW_INT32 error;
tw_osli_dbg_dprintf(10, sc, "SCSI I/O request 0x%x",
csio->cdb_io.cdb_bytes[0]);
if (ccb_h->target_id >= TW_CL_MAX_NUM_UNITS) {
tw_osli_dbg_dprintf(3, sc, "Invalid target. PTL = %x %x %jx",
ccb_h->path_id, ccb_h->target_id,
(uintmax_t)ccb_h->target_lun);
ccb_h->status |= CAM_TID_INVALID;
xpt_done(ccb);
return(1);
}
if (ccb_h->target_lun >= TW_CL_MAX_NUM_LUNS) {
tw_osli_dbg_dprintf(3, sc, "Invalid lun. PTL = %x %x %jx",
ccb_h->path_id, ccb_h->target_id,
(uintmax_t)ccb_h->target_lun);
ccb_h->status |= CAM_LUN_INVALID;
xpt_done(ccb);
return(1);
}
if(ccb_h->flags & CAM_CDB_PHYS) {
tw_osli_printf(sc, "",
TW_CL_SEVERITY_ERROR_STRING,
TW_CL_MESSAGE_SOURCE_FREEBSD_DRIVER,
0x2105,
"Physical CDB address!");
ccb_h->status = CAM_REQ_INVALID;
xpt_done(ccb);
return(1);
}
/*
* We are going to work on this request. Mark it as enqueued (though
* we don't actually queue it...)
*/
ccb_h->status |= CAM_SIM_QUEUED;
if((ccb_h->flags & CAM_DIR_MASK) != CAM_DIR_NONE) {
if(ccb_h->flags & CAM_DIR_IN)
req->flags |= TW_OSLI_REQ_FLAGS_DATA_IN;
else
req->flags |= TW_OSLI_REQ_FLAGS_DATA_OUT;
}
/* Build the CL understood request packet for SCSI cmds. */
req_pkt = &req->req_pkt;
req_pkt->status = 0;
req_pkt->tw_osl_callback = tw_osl_complete_io;
scsi_req = &(req_pkt->gen_req_pkt.scsi_req);
scsi_req->unit = ccb_h->target_id;
scsi_req->lun = ccb_h->target_lun;
scsi_req->sense_len = 0;
scsi_req->sense_data = (TW_UINT8 *)(&csio->sense_data);
scsi_req->scsi_status = 0;
if(ccb_h->flags & CAM_CDB_POINTER)
scsi_req->cdb = csio->cdb_io.cdb_ptr;
else
scsi_req->cdb = csio->cdb_io.cdb_bytes;
scsi_req->cdb_len = csio->cdb_len;
if (csio->dxfer_len > TW_CL_MAX_IO_SIZE) {
tw_osli_printf(sc, "size = %d",
TW_CL_SEVERITY_ERROR_STRING,
TW_CL_MESSAGE_SOURCE_FREEBSD_DRIVER,
0x2106,
"I/O size too big",
csio->dxfer_len);
ccb_h->status = CAM_REQ_TOO_BIG;
ccb_h->status &= ~CAM_SIM_QUEUED;
xpt_done(ccb);
return(1);
}
if ((ccb_h->flags & CAM_DATA_MASK) == CAM_DATA_VADDR) {
if ((req->length = csio->dxfer_len) != 0) {
req->data = csio->data_ptr;
scsi_req->sgl_entries = 1;
}
} else
req->flags |= TW_OSLI_REQ_FLAGS_CCB;
req->deadline = tw_osl_get_local_time() + (ccb_h->timeout / 1000);
/*
* twa_map_load_data_callback will fill in the SGL,
* and submit the I/O.
*/
error = tw_osli_map_request(req);
if ((error) && (req->flags & TW_OSLI_REQ_FLAGS_FAILED)) {
req->deadline = 0;
ccb_h->status = CAM_REQ_CMP_ERR;
ccb_h->status &= ~CAM_SIM_QUEUED;
xpt_done(ccb);
}
return(error);
}
/*
* Function name: twa_attach
* Description: Allocates pci resources; updates sc; adds a node to the
* sysctl tree to expose the driver version; makes calls
* (to the Common Layer) to initialize ctlr, and to
* attach to CAM.
*
* Input: dev -- bus device corresponding to the ctlr
* Output: None
* Return value: 0 -- success
* non-zero-- failure
*/
static TW_INT32
twa_attach(device_t dev)
{
struct twa_softc *sc = device_get_softc(dev);
TW_INT32 bar_num;
TW_INT32 bar0_offset;
TW_INT32 bar_size;
TW_INT32 irq_flags;
TW_INT32 error;
sc->ctlr_handle.osl_ctlr_ctxt = sc;
/* Initialize the softc structure. */
sc->bus_dev = dev;
tw_osli_dbg_dprintf(3, sc, "entered");
sc->device_id = pci_get_device(dev);
/* Initialize the mutexes right here. */
sc->io_lock = &(sc->io_lock_handle);
spin_init(sc->io_lock, "twa_iolock");
sc->q_lock = &(sc->q_lock_handle);
spin_init(sc->q_lock, "twa_qlock");
sc->sim_lock = &(sc->sim_lock_handle);
lockinit(sc->sim_lock, "tw_osl_sim_lock", 0, LK_CANRECURSE);
SYSCTL_ADD_STRING(device_get_sysctl_ctx(dev),
SYSCTL_CHILDREN(device_get_sysctl_tree(dev)),
OID_AUTO, "driver_version", CTLFLAG_RD,
TW_OSL_DRIVER_VERSION_STRING, 0, "TWA driver version");
/* Force the busmaster enable bit on, in case the BIOS forgot. */
pci_enable_busmaster(dev);
/* Allocate the PCI register window. */
if ((error = tw_cl_get_pci_bar_info(sc->device_id, TW_CL_BAR_TYPE_MEM,
&bar_num, &bar0_offset, &bar_size))) {
tw_osli_printf(sc, "error = %d",
TW_CL_SEVERITY_ERROR_STRING,
TW_CL_MESSAGE_SOURCE_FREEBSD_DRIVER,
0x201F,
"Can't get PCI BAR info",
error);
tw_osli_free_resources(sc);
return(error);
}
sc->reg_res_id = PCIR_BARS + bar0_offset;
if ((sc->reg_res = bus_alloc_resource(dev, SYS_RES_MEMORY,
&(sc->reg_res_id), 0, ~0, 1, RF_ACTIVE))
== NULL) {
tw_osli_printf(sc, "error = %d",
TW_CL_SEVERITY_ERROR_STRING,
TW_CL_MESSAGE_SOURCE_FREEBSD_DRIVER,
0x2002,
"Can't allocate register window",
ENXIO);
tw_osli_free_resources(sc);
return(ENXIO);
}
sc->bus_tag = rman_get_bustag(sc->reg_res);
sc->bus_handle = rman_get_bushandle(sc->reg_res);
/* Allocate and register our interrupt. */
sc->irq_res_id = 0;
sc->irq_type = pci_alloc_1intr(sc->bus_dev, twa_msi_enable,
&sc->irq_res_id, &irq_flags);
if ((sc->irq_res = bus_alloc_resource(sc->bus_dev, SYS_RES_IRQ,
&(sc->irq_res_id), 0, ~0, 1,
irq_flags)) == NULL) {
tw_osli_printf(sc, "error = %d",
TW_CL_SEVERITY_ERROR_STRING,
TW_CL_MESSAGE_SOURCE_FREEBSD_DRIVER,
0x2003,
"Can't allocate interrupt",
ENXIO);
tw_osli_free_resources(sc);
return(ENXIO);
}
if ((error = twa_setup_intr(sc))) {
tw_osli_printf(sc, "error = %d",
TW_CL_SEVERITY_ERROR_STRING,
TW_CL_MESSAGE_SOURCE_FREEBSD_DRIVER,
0x2004,
"Can't set up interrupt",
error);
tw_osli_free_resources(sc);
return(error);
}
if ((error = tw_osli_alloc_mem(sc))) {
tw_osli_printf(sc, "error = %d",
TW_CL_SEVERITY_ERROR_STRING,
TW_CL_MESSAGE_SOURCE_FREEBSD_DRIVER,
0x2005,
"Memory allocation failure",
error);
tw_osli_free_resources(sc);
return(error);
}
/* Initialize the Common Layer for this controller. */
if ((error = tw_cl_init_ctlr(&sc->ctlr_handle, sc->flags, sc->device_id,
TW_OSLI_MAX_NUM_REQUESTS, TW_OSLI_MAX_NUM_AENS,
sc->non_dma_mem, sc->dma_mem,
sc->dma_mem_phys
))) {
tw_osli_printf(sc, "error = %d",
TW_CL_SEVERITY_ERROR_STRING,
TW_CL_MESSAGE_SOURCE_FREEBSD_DRIVER,
0x2006,
"Failed to initialize Common Layer/controller",
error);
tw_osli_free_resources(sc);
return(error);
}
/* Create the control device. */
sc->ctrl_dev = make_dev(&twa_ops, device_get_unit(sc->bus_dev),
UID_ROOT, GID_OPERATOR, S_IRUSR | S_IWUSR,
"twa%d", device_get_unit(sc->bus_dev));
sc->ctrl_dev->si_drv1 = sc;
if ((error = tw_osli_cam_attach(sc))) {
tw_osli_free_resources(sc);
tw_osli_printf(sc, "error = %d",
TW_CL_SEVERITY_ERROR_STRING,
TW_CL_MESSAGE_SOURCE_FREEBSD_DRIVER,
0x2007,
"Failed to initialize CAM",
error);
return(error);
}
sc->watchdog_index = 0;
callout_init_mp(&(sc->watchdog_callout[0]));
callout_init_mp(&(sc->watchdog_callout[1]));
callout_reset(&(sc->watchdog_callout[0]), 5*hz, twa_watchdog, &sc->ctlr_handle);
return(0);
}
