Example #1
0
/*---------------------------------------------------------------------------*/
int
main(int argc, char **argv)
{
  /*
   * Initalize hardware.
   */
  msp430_cpu_init();
  clock_init();
  leds_init();
  leds_on(LEDS_RED);

  clock_wait(100);

  uart0_init(BAUD2UBR(115200)); /* Must come before first printf */
#if WITH_UIP
  slip_arch_init(BAUD2UBR(115200));
#endif /* WITH_UIP */

  /* XXX hack: Fix it so that the 802.15.4 MAC address is compatible
     with an Ethernet MAC address - byte 0 (byte 2 in the DS ID)
     cannot be odd. */
  //Enric node_mac[2] &= 0xfe;
  node_mac[0] = 0x00;
  node_mac[1] = 0x12;
  node_mac[2] = 0x76;
  node_mac[3] = 0x01;
  node_mac[4] = 0x02;
  node_mac[5] = 0x03;
  node_mac[2] = 0x04;
  node_mac[7] = 0x05;

  
  xmem_init();

  rtimer_init();
  /*
   * Hardware initialization done!
   */

  
  /* Restore node id if such has been stored in external mem */
  node_id_restore();


  /* for setting "hardcoded" IEEE 802.15.4 MAC addresses */
#ifdef IEEE_802154_MAC_ADDRESS
  {
    uint8_t ieee[] = IEEE_802154_MAC_ADDRESS;
    memcpy(node_mac, ieee, sizeof(uip_lladdr.addr));
    node_mac[7] = node_id & 0xff;
  }
#endif

  //Enric random_init(node_mac[0] + node_id);
  
   /*
   * Initialize Contiki and our processes.
   */
  process_init();
  process_start(&etimer_process, NULL);

  process_start(&sensors_process, NULL);

  ctimer_init();

  set_rime_addr();

  cc2420_init();
  accm_init();

  {
    uint8_t longaddr[8];
    uint16_t shortaddr;
    
    shortaddr = (rimeaddr_node_addr.u8[0] << 8) +
      rimeaddr_node_addr.u8[1];
    memset(longaddr, 0, sizeof(longaddr));
    rimeaddr_copy((rimeaddr_t *)&longaddr, &rimeaddr_node_addr);
    printf("MAC %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x ",
           longaddr[0], longaddr[1], longaddr[2], longaddr[3],
           longaddr[4], longaddr[5], longaddr[6], longaddr[7]);
    
    cc2420_set_pan_addr(IEEE802154_PANID, shortaddr, longaddr);
  }
  cc2420_set_channel(RF_CHANNEL);

  leds_off(LEDS_ALL);

  PRINTF(CONTIKI_VERSION_STRING " started. ");

  if(node_id > 0) {
    PRINTF("Node id is set to %u.\n", node_id);
  } else {
    PRINTF("Node id is not set.\n");
  }

  //Enric printf("MAC %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x",
	 //Enric node_mac[0], node_mac[1], node_mac[2], node_mac[3],
	 //Enric node_mac[4], node_mac[5], node_mac[6], node_mac[7]);

#if WITH_UIP6
  PRINTF("in WITH_UIP6\n"); //Enric
  memcpy(&uip_lladdr.addr, node_mac, sizeof(uip_lladdr.addr));
  /* Setup nullmac-like MAC for 802.15.4 */
/*   sicslowpan_init(sicslowmac_init(&cc2420_driver)); */
/*   printf(" %s channel %u\n", sicslowmac_driver.name, RF_CHANNEL); */

  /* Setup X-MAC for 802.15.4 */
  queuebuf_init();

  NETSTACK_RDC.init();
  NETSTACK_MAC.init();
  NETSTACK_NETWORK.init();

  printf("%s %s, channel check rate %lu Hz, radio channel %u\n",
         NETSTACK_MAC.name, NETSTACK_RDC.name,
         CLOCK_SECOND / (NETSTACK_RDC.channel_check_interval() == 0 ? 1:
                         NETSTACK_RDC.channel_check_interval()),
         RF_CHANNEL);

  process_start(&tcpip_process, NULL);

  printf("Tentative link-local IPv6 address ");
  {
    uip_ds6_addr_t *lladdr;
    int i;
    lladdr = uip_ds6_get_link_local(-1);
    for(i = 0; i < 7; ++i) {
      printf("%02x%02x:", lladdr->ipaddr.u8[i * 2],
             lladdr->ipaddr.u8[i * 2 + 1]);
    }
    printf("%02x%02x\n", lladdr->ipaddr.u8[14], lladdr->ipaddr.u8[15]);
  }
  
  if(!UIP_CONF_IPV6_RPL) {
    uip_ipaddr_t ipaddr;
    int i;
    uip_ip6addr(&ipaddr, 0xaaaa, 0, 0, 0, 0, 0, 0, 0);
    uip_ds6_set_addr_iid(&ipaddr, &uip_lladdr);
    uip_ds6_addr_add(&ipaddr, 0, ADDR_TENTATIVE);
    printf("Tentative global IPv6 address ");
    for(i = 0; i < 7; ++i) {
      printf("%02x%02x:",
             ipaddr.u8[i * 2], ipaddr.u8[i * 2 + 1]);
    }
    printf("%02x%02x\n",
           ipaddr.u8[7 * 2], ipaddr.u8[7 * 2 + 1]);
  }

#else /* WITH_UIP6 */

  NETSTACK_RDC.init();
  NETSTACK_MAC.init();
  NETSTACK_NETWORK.init();

  printf("%s %s, channel check rate %lu Hz, radio channel %u\n",
         NETSTACK_MAC.name, NETSTACK_RDC.name,
         CLOCK_SECOND / (NETSTACK_RDC.channel_check_interval() == 0? 1:
                         NETSTACK_RDC.channel_check_interval()),
         RF_CHANNEL);
#endif /* WITH_UIP6 */

#if !WITH_UIP && !WITH_UIP6
  uart0_set_input(serial_line_input_byte);
  serial_line_init();
#endif

#if PROFILE_CONF_ON
  profile_init();
#endif /* PROFILE_CONF_ON */

  leds_off(LEDS_GREEN);

#if TIMESYNCH_CONF_ENABLED
  timesynch_init();
  timesynch_set_authority_level(rimeaddr_node_addr.u8[0]);
#endif /* TIMESYNCH_CONF_ENABLED */

#if WITH_UIP
  process_start(&tcpip_process, NULL);
  process_start(&uip_fw_process, NULL);	/* Start IP output */
  process_start(&slip_process, NULL);

  slip_set_input_callback(set_gateway);

  {
    uip_ipaddr_t hostaddr, netmask;

    uip_init();

    uip_ipaddr(&hostaddr, 172,16,
	       rimeaddr_node_addr.u8[0],rimeaddr_node_addr.u8[1]);
    uip_ipaddr(&netmask, 255,255,0,0);
    uip_ipaddr_copy(&meshif.ipaddr, &hostaddr);

    uip_sethostaddr(&hostaddr);
    uip_setnetmask(&netmask);
    uip_over_mesh_set_net(&hostaddr, &netmask);
    /*    uip_fw_register(&slipif);*/
    uip_over_mesh_set_gateway_netif(&slipif);
    uip_fw_default(&meshif);
    uip_over_mesh_init(UIP_OVER_MESH_CHANNEL);
    printf("uIP started with IP address %d.%d.%d.%d\n",
	   uip_ipaddr_to_quad(&hostaddr));
  }
#endif /* WITH_UIP */

  energest_init();
  ENERGEST_ON(ENERGEST_TYPE_CPU);

  print_processes(autostart_processes);
  autostart_start(autostart_processes);

  /*
   * This is the scheduler loop.
   */
#if DCOSYNCH_CONF_ENABLED
  timer_set(&mgt_timer, DCOSYNCH_PERIOD * CLOCK_SECOND);
#endif
  watchdog_start();
  /*  watchdog_stop();*/
  while(1) {
    int r;
#if PROFILE_CONF_ON
    profile_episode_start();
#endif /* PROFILE_CONF_ON */
    do {
      /* Reset watchdog. */
      watchdog_periodic();
      r = process_run();
    } while(r > 0);
#if PROFILE_CONF_ON
    profile_episode_end();
#endif /* PROFILE_CONF_ON */

    /*
     * Idle processing.
     */
    int s = splhigh();		/* Disable interrupts. */
    /* uart0_active is for avoiding LPM3 when still sending or receiving */
    if(process_nevents() != 0 || uart0_active()) {
      splx(s);			/* Re-enable interrupts. */
    } else {
      static unsigned long irq_energest = 0;

#if DCOSYNCH_CONF_ENABLED
      /* before going down to sleep possibly do some management */
      if (timer_expired(&mgt_timer)) {
	timer_reset(&mgt_timer);
	msp430_sync_dco();
      }
#endif

      /* Re-enable interrupts and go to sleep atomically. */
      ENERGEST_OFF(ENERGEST_TYPE_CPU);
      ENERGEST_ON(ENERGEST_TYPE_LPM);
      /* We only want to measure the processing done in IRQs when we
	 are asleep, so we discard the processing time done when we
	 were awake. */
      energest_type_set(ENERGEST_TYPE_IRQ, irq_energest);
      watchdog_stop();
      _BIS_SR(GIE | SCG0 | SCG1 | CPUOFF); /* LPM3 sleep. This
					      statement will block
					      until the CPU is
					      woken up by an
					      interrupt that sets
					      the wake up flag. */

      /* We get the current processing time for interrupts that was
	 done during the LPM and store it for next time around.  */
      dint();
      irq_energest = energest_type_time(ENERGEST_TYPE_IRQ);
      eint();
      watchdog_start();
      ENERGEST_OFF(ENERGEST_TYPE_LPM);
      ENERGEST_ON(ENERGEST_TYPE_CPU);
    }
  }

  return 0;
}
Example #2
0
/*---------------------------------------------------------------------------*/
int
main(int argc, char **argv)
{
  /*
   * Initalize hardware.
   */
  msp430_cpu_init();
  clock_init();
  leds_init();
  leds_on(LEDS_RED);

  clock_wait(100);

  uart0_init(BAUD2UBR(UART0_BAUD_RATE)); /* Must come before first printf */
#if NETSTACK_CONF_WITH_IPV4
  slip_arch_init(BAUD2UBR(UART0_BAUD_RATE));
#endif /* NETSTACK_CONF_WITH_IPV4 */

  xmem_init();

  rtimer_init();
  /*
   * Hardware initialization done!
   */

  /* Restore node id if such has been stored in external mem */
  node_id_restore();

  /* If no MAC address was burned, we use the node id or the Z1 product ID */
  if(!(node_mac[0] | node_mac[1] | node_mac[2] | node_mac[3] |
       node_mac[4] | node_mac[5] | node_mac[6] | node_mac[7])) {

#ifdef SERIALNUM
    if(!node_id) {
      PRINTF("Node id is not set, using Z1 product ID\n");
      node_id = SERIALNUM;
    }
#endif
    node_mac[0] = 0xc1;  /* Hardcoded for Z1 */
    node_mac[1] = 0x0c;  /* Hardcoded for Revision C */
    node_mac[2] = 0x00;  /* Hardcoded to arbitrary even number so that
                            the 802.15.4 MAC address is compatible with
                            an Ethernet MAC address - byte 0 (byte 2 in
                            the DS ID) */
    node_mac[3] = 0x00;  /* Hardcoded */
    node_mac[4] = 0x00;  /* Hardcoded */
    node_mac[5] = 0x00;  /* Hardcoded */
    node_mac[6] = node_id >> 8;
    node_mac[7] = node_id & 0xff;
  }

  /* Overwrite node MAC if desired at compile time */
#ifdef MACID
#warning "***** CHANGING DEFAULT MAC *****"
  node_mac[0] = 0xc1;  /* Hardcoded for Z1 */
  node_mac[1] = 0x0c;  /* Hardcoded for Revision C */
  node_mac[2] = 0x00;  /* Hardcoded to arbitrary even number so that
                          the 802.15.4 MAC address is compatible with
                          an Ethernet MAC address - byte 0 (byte 2 in
                          the DS ID) */
  node_mac[3] = 0x00;  /* Hardcoded */
  node_mac[4] = 0x00;  /* Hardcoded */
  node_mac[5] = 0x00;  /* Hardcoded */
  node_mac[6] = MACID >> 8;
  node_mac[7] = MACID & 0xff;
#endif

#ifdef IEEE_802154_MAC_ADDRESS
  /* for setting "hardcoded" IEEE 802.15.4 MAC addresses */
  {
    uint8_t ieee[] = IEEE_802154_MAC_ADDRESS;
    memcpy(node_mac, ieee, sizeof(uip_lladdr.addr));
    node_mac[7] = node_id & 0xff;
  }
#endif /* IEEE_802154_MAC_ADDRESS */

  /*
   * Initialize Contiki and our processes.
   */
  random_init(node_mac[6] + node_mac[7]);
  process_init();
  process_start(&etimer_process, NULL);

  ctimer_init();

  init_platform();

  set_rime_addr();

  cc2420_init();
  SENSORS_ACTIVATE(adxl345);

  {
    uint8_t longaddr[8];
    uint16_t shortaddr;

    shortaddr = (linkaddr_node_addr.u8[0] << 8) +
      linkaddr_node_addr.u8[1];
    memset(longaddr, 0, sizeof(longaddr));
    linkaddr_copy((linkaddr_t *)&longaddr, &linkaddr_node_addr);
    printf("MAC %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x ",
           longaddr[0], longaddr[1], longaddr[2], longaddr[3],
           longaddr[4], longaddr[5], longaddr[6], longaddr[7]);

    cc2420_set_pan_addr(IEEE802154_PANID, shortaddr, longaddr);
  }

  leds_off(LEDS_ALL);

#ifdef SERIALNUM
  PRINTF("Ref ID: %u\n", SERIALNUM);
#endif
  PRINTF(CONTIKI_VERSION_STRING " started. ");

  if(node_id) {
    PRINTF("Node id is set to %u.\n", node_id);
  } else {
    PRINTF("Node id not set\n");
  }

#if NETSTACK_CONF_WITH_IPV6
  memcpy(&uip_lladdr.addr, node_mac, sizeof(uip_lladdr.addr));
  /* Setup nullmac-like MAC for 802.15.4 */
/*   sicslowpan_init(sicslowmac_init(&cc2420_driver)); */
/*   printf(" %s channel %u\n", sicslowmac_driver.name, CC2420_CONF_CHANNEL); */

  /* Setup X-MAC for 802.15.4 */
  queuebuf_init();

	netstack_init();
//  NETSTACK_RDC.init();
//  NETSTACK_MAC.init();
//  NETSTACK_LLSEC.init();
//  NETSTACK_NETWORK.init();

  printf("%s %s %s, channel check rate %lu Hz, radio channel %u\n",
         NETSTACK_LLSEC.name, NETSTACK_MAC.name, NETSTACK_RDC.name,
         CLOCK_SECOND / (NETSTACK_RDC.channel_check_interval() == 0 ? 1 :
                         NETSTACK_RDC.channel_check_interval()),
         CC2420_CONF_CHANNEL);

  process_start(&tcpip_process, NULL);

  printf("Tentative link-local IPv6 address ");
  {
    uip_ds6_addr_t *lladdr;
    int i;
    lladdr = uip_ds6_get_link_local(-1);
    for(i = 0; i < 7; ++i) {
      printf("%02x%02x:", lladdr->ipaddr.u8[i * 2],
             lladdr->ipaddr.u8[i * 2 + 1]);
    }
    printf("%02x%02x\n", lladdr->ipaddr.u8[14], lladdr->ipaddr.u8[15]);
  }

  if(!UIP_CONF_IPV6_RPL) {
    uip_ipaddr_t ipaddr;
    int i;
    uip_ip6addr(&ipaddr, UIP_DS6_DEFAULT_PREFIX, 0, 0, 0, 0, 0, 0, 0);
    uip_ds6_set_addr_iid(&ipaddr, &uip_lladdr);
    uip_ds6_addr_add(&ipaddr, 0, ADDR_TENTATIVE);
    printf("Tentative global IPv6 address ");
    for(i = 0; i < 7; ++i) {
      printf("%02x%02x:",
             ipaddr.u8[i * 2], ipaddr.u8[i * 2 + 1]);
    }
    printf("%02x%02x\n",
           ipaddr.u8[7 * 2], ipaddr.u8[7 * 2 + 1]);
  }

#else /* NETSTACK_CONF_WITH_IPV6 */

	netstack_init();
  //NETSTACK_RDC.init();
  //NETSTACK_MAC.init();
  //NETSTACK_LLSEC.init();
  //NETSTACK_NETWORK.init();

  printf("%s %s %s, channel check rate %lu Hz, radio channel %u\n",
         NETSTACK_LLSEC.name, NETSTACK_MAC.name, NETSTACK_RDC.name,
         CLOCK_SECOND / (NETSTACK_RDC.channel_check_interval() == 0 ? 1 :
                         NETSTACK_RDC.channel_check_interval()),
         CC2420_CONF_CHANNEL);
#endif /* NETSTACK_CONF_WITH_IPV6 */

#if !NETSTACK_CONF_WITH_IPV4 && !NETSTACK_CONF_WITH_IPV6
  uart0_set_input(serial_line_input_byte);
  serial_line_init();
#endif

  leds_off(LEDS_GREEN);

#if TIMESYNCH_CONF_ENABLED
  timesynch_init();
  timesynch_set_authority_level(linkaddr_node_addr.u8[0]);
#endif /* TIMESYNCH_CONF_ENABLED */

#if NETSTACK_CONF_WITH_IPV4
  process_start(&tcpip_process, NULL);
  process_start(&uip_fw_process, NULL); /* Start IP output */
  process_start(&slip_process, NULL);

  slip_set_input_callback(set_gateway);

  {
    uip_ipaddr_t hostaddr, netmask;

    uip_init();

    uip_ipaddr(&hostaddr, 172, 16,
               linkaddr_node_addr.u8[0], linkaddr_node_addr.u8[1]);
    uip_ipaddr(&netmask, 255, 255, 0, 0);
    uip_ipaddr_copy(&meshif.ipaddr, &hostaddr);

    uip_sethostaddr(&hostaddr);
    uip_setnetmask(&netmask);
    uip_over_mesh_set_net(&hostaddr, &netmask);
    /*    uip_fw_register(&slipif);*/
    uip_over_mesh_set_gateway_netif(&slipif);
    uip_fw_default(&meshif);
    uip_over_mesh_init(UIP_OVER_MESH_CHANNEL);
    printf("uIP started with IP address %d.%d.%d.%d\n",
           uip_ipaddr_to_quad(&hostaddr));
  }
#endif /* NETSTACK_CONF_WITH_IPV4 */

  energest_init();
  ENERGEST_ON(ENERGEST_TYPE_CPU);

  print_processes(autostart_processes);
  autostart_start(autostart_processes);

  /*
   * This is the scheduler loop.
   */
#if DCOSYNCH_CONF_ENABLED
  timer_set(&mgt_timer, DCOSYNCH_PERIOD * CLOCK_SECOND);
#endif
  watchdog_start();
  /*  watchdog_stop();*/
  while(1) {
    int r;
    do {
      /* Reset watchdog. */
      watchdog_periodic();
      r = process_run();
    } while(r > 0);

    /*
     * Idle processing.
     */
    int s = splhigh();    /* Disable interrupts. */
    /* uart0_active is for avoiding LPM3 when still sending or receiving */
    if(process_nevents() != 0 || uart0_active()) {
      splx(s);      /* Re-enable interrupts. */
    } else {
      static unsigned long irq_energest = 0;

#if DCOSYNCH_CONF_ENABLED
      /* before going down to sleep possibly do some management */
      if(timer_expired(&mgt_timer)) {
        timer_reset(&mgt_timer);
        msp430_sync_dco();
      }
#endif

      /* Re-enable interrupts and go to sleep atomically. */
      ENERGEST_SWITCH(ENERGEST_TYPE_CPU, ENERGEST_TYPE_LPM);
      /* We only want to measure the processing done in IRQs when we
         are asleep, so we discard the processing time done when we
         were awake. */
      energest_type_set(ENERGEST_TYPE_IRQ, irq_energest);
      watchdog_stop();
      _BIS_SR(GIE | SCG0 | SCG1 | CPUOFF); /* LPM3 sleep. This
                                              statement will block
                                              until the CPU is
                                              woken up by an
                                              interrupt that sets
                                              the wake up flag. */

      /* We get the current processing time for interrupts that was
         done during the LPM and store it for next time around.  */
      dint();
      irq_energest = energest_type_time(ENERGEST_TYPE_IRQ);
      eint();
      watchdog_start();
      ENERGEST_SWITCH(ENERGEST_TYPE_LPM, ENERGEST_TYPE_CPU);
    }
  }

  return 0;
}
void
main(void)
{
  msp430_cpu_init();
  leds_init();
  leds_on(LEDS_ALL);
  clock_init();

  #if USE_SERIAL
  /* 
   * The Launchpad is limited to 9600 by the msp430--usb bridge; higher speeds can
   * be used with a separate uartserial->usb cable connected to the rxtx pins on
   * the header, but this Contiki port is kept at a maximum simplicity now, hence
   * 9600. If you do get one such cable, you can increase this to eg 115200.
   */
  uart0_init(BAUD2UBR(9600));
  #else
  /*
   * any printf's makes compiler complain of unresolved references to putchar;
   * this solves that. Must come before first printf.
   */
  #define printf(...)
  #endif  /* USE_SERIAL */

  rtimer_init();
  process_init();
  process_start(&etimer_process, NULL);
  ctimer_init();

  button_init();
  adc_init();

  #if _MCU_ == 2553
  #if HAS_EXT_OSC
  /* pwm only available on 2553 with external crystal as it has two hw timers */
  pwm_init(PWM_FREQ);
  #endif    /* HAS_EXT_OSC */
  #endif    /* _MCU_ == 2553 */

  #if USE_SERIAL
  uart0_set_input(serial_line_input_byte);
  serial_line_init();
  #endif  /* USE_SERIAL */


  #if USE_RADIO
  {
    rimeaddr_t addr;
    uint8_t i;
    /* Check that Magic number exists and node id first byte is not zero */
    if (NODEID_INFOMEM_LOCATION[0] != 0xBE || 
        NODEID_INFOMEM_LOCATION[1] != 0xEF ||
        NODEID_INFOMEM_LOCATION[2] == 0) {
      /* error - no address stored, just set to fail-address */
      addr.u8[0] = 0xde;    // 222
      addr.u8[1] = 0xad;    // 173
    } else {
      addr.u8[0] = NODEID_INFOMEM_LOCATION[2];
      addr.u8[1] = NODEID_INFOMEM_LOCATION[3];
    }
    rimeaddr_set_node_addr(&addr);
    printf("Rime started with address ");
    for(i = 0; i < sizeof(addr.u8) - 1; i++) {
      printf("%d.", addr.u8[i]);
    }
    printf("%d\n", addr.u8[i]);
  }

  netstack_init();
  #endif  /* USE_RADIO */

  watchdog_start();
  autostart_start(autostart_processes);
  leds_off(LEDS_ALL);
  printf(CONTIKI_VERSION_STRING " started.\n");

  //XXX sth messes with LEDs; find and fix
  leds_init();  // XXX remove when fixed.

  while(1) {
    /*
     * The Contiki main loop, greatly simplified and shortened compared with eg
     * msp430f1611 due to severe space constraints (mainly RAM).
     * As soon as we are not doing anything, we spend the time in LPM3.
     */
    int r;
    do {
      /* handle all events */
      watchdog_periodic();
      r = process_run();
    } while(r > 0);

    /* if not printing or pending events, sleep. */
    #if USE_SERIAL
      if(process_nevents() == 0 && !uart0_active()) {
    #else
      if(process_nevents() == 0) {
    #endif  /* USE_SERIAL */
      /* we are ready to go to sleep, LPM3 */
      if(dcoreq == 0) {
        LPM3;
      } else {
        LPM0;
      }
      asm("NOP;");

    }
  }
  return;
}