C++ (Cpp) upmu_set_rg_vcamd_vosel Examples

Example #1

File: lh570_hd720_dsi_vdo_lgd_phase3.c Project: vitek999/android_kernel_lg_mm

/* VCAMD 1.8v LDO enable */
static void ldo_1v8io_on(void)
{
#ifdef BUILD_UBOOT
#error "not implemeted"
#elif defined(BUILD_LK)
	upmu_set_rg_vcamd_vosel(3);	/* VGP2_SEL= 101 : 2.8V , 110 : 3.0V */
	upmu_set_rg_vcamd_en(1);
#else
		upmu_set_rg_vcamd_vosel(3);  // VGP2_SEL= 101 : 2.8V , 110 : 3.0V
		upmu_set_rg_vcamd_en(1);
		//hwPowerOn(MT6323_POWER_LDO_VCAMD, VOL_1800, "1V8_LCD_VIO_MTK_S");
#endif
}

Example #2

File: r69338_hd720_dsi_vdo_jdi.c Project: Elnter/j608_kernel

/* VCAMD 1.8v LDO enable */
static void ldo_1v8io_on(void)
{
#ifdef BUILD_UBOOT 
	#error "not implemeted"
#elif defined(BUILD_LK) 	
    #if defined(_Y70_Rev_A_)    // Y70 Rev.A board
	upmu_set_rg_vgp2_vosel(3);  // VGP2_SEL= 101 : 2.8V , 110 : 3.0V
	upmu_set_rg_vgp2_en(1);
    #elif defined(_Y70_Rev_B_)  // Y70 Rev.B board
	upmu_set_rg_vgp1_vosel(3);  // VGP2_SEL= 101 : 2.8V , 110 : 3.0V
	upmu_set_rg_vgp1_en(1);
    #else               // Y70 Rev.A-2 board
	upmu_set_rg_vcamd_vosel(3);  // VGP2_SEL= 101 : 2.8V , 110 : 3.0V
	upmu_set_rg_vcamd_en(1);
    #endif /* _Y70_Rev_A_ */
#else
    #if defined(_Y70_Rev_A_)    // Y70 Rev.A board
	hwPowerOn(MT6323_POWER_LDO_VGP2, VOL_1800, "1V8_LCD_VIO_MTK_S");	    
    #elif defined(_Y70_Rev_B_)  // Y70 Rev.B board
	hwPowerOn(MT6323_POWER_LDO_VGP1, VOL_1800, "1V8_MTK_LCD_IO");	
    #else               // Y70 Rev.A-2 board
	hwPowerOn(MT6323_POWER_LDO_VCAMD, VOL_1800, "1V8_LCD_VIO_MTK_S");	
    #endif /* _Y70_Rev_A_ */
#endif 
}

Example #3

File: r69338_hd720_dsi_vdo_jdi.c Project: Elnter/j608_kernel

/* VCAMD 1.8v LDO enable */
static void ldo_1v8io_on(void)
{
#ifdef BUILD_UBOOT 
	#error "not implemeted"
#elif defined(BUILD_LK) 	
    if ( g_PCBver==HW_REV_B )
    {
    	upmu_set_rg_vgp1_vosel(3);  // VGP2_SEL= 101 : 2.8V , 110 : 3.0V
    	upmu_set_rg_vgp1_en(1);        
    }
    else if ( g_PCBver==HW_REV_A_2 )
    {
    	upmu_set_rg_vcamd_vosel(3);  // VGP2_SEL= 101 : 2.8V , 110 : 3.0V
    	upmu_set_rg_vcamd_en(1);        
    }
    else    //( g_PCBver==HW_REV_A )
    {
    	upmu_set_rg_vgp2_vosel(3);  // VGP2_SEL= 101 : 2.8V , 110 : 3.0V
    	upmu_set_rg_vgp2_en(1);
    }
#else
    if ( g_PCBver==HW_REV_B )
    {
    	hwPowerOn(MT6323_POWER_LDO_VGP1, VOL_1800, "1V8_MTK_LCD_IO");	        
    }
    else if ( g_PCBver==HW_REV_A_2 )
    {
    	hwPowerOn(MT6323_POWER_LDO_VCAMD, VOL_1800, "1V8_LCD_VIO_MTK_S");	        
    }
    else    //( g_PCBver==HW_REV_A )
    {
    	hwPowerOn(MT6323_POWER_LDO_VGP2, VOL_1800, "1V8_LCD_VIO_MTK_S");	        
    }    
#endif 
}

Example #4

File: db7436_dsi_vdo_fwvga.c Project: CobraJet93/kernel-3.10.54

/* 1.8v LDO enable */
static void ldo_1v8io_on(void)
{
#ifdef BUILD_UBOOT
	#error "not implemeted"
#elif defined(BUILD_LK)
	// IOVCC 1.8v LDO on
	upmu_set_rg_vcamd_vosel(3);
	upmu_set_rg_vcamd_en(1);
#else
	hwPowerOn(MT6323_POWER_LDO_VCAMD, VOL_1800, "1V8_LCD_VIO_MTK_S");
#endif
}