SelectFormat::CharacterClass SelectFormat::classifyCharacter(UChar ch) const{ if ((ch >= CAP_A) && (ch <= CAP_Z)) { return tStartKeyword; } if ((ch >= LOW_A) && (ch <= LOW_Z)) { return tStartKeyword; } if ((ch >= U_ZERO) && (ch <= U_NINE)) { return tContinueKeyword; } if ( uprv_isRuleWhiteSpace(ch) ){ return tSpace; } switch (ch) { case LEFTBRACE: return tLeftBrace; case RIGHTBRACE: return tRightBrace; case HYPHEN: case LOWLINE: return tContinueKeyword; default : return tOther; } }
NFRuleSet::NFRuleSet(UnicodeString* descriptions, int32_t index, UErrorCode& status) : name() , rules(0) , negativeNumberRule(NULL) , fIsFractionRuleSet(FALSE) , fIsPublic(FALSE) , fRecursionCount(0) { for (int i = 0; i < 3; ++i) { fractionRules[i] = NULL; } if (U_FAILURE(status)) { return; } UnicodeString& description = descriptions[index]; // !!! make sure index is valid if (description.length() == 0) { // throw new IllegalArgumentException("Empty rule set description"); status = U_PARSE_ERROR; return; } // if the description begins with a rule set name (the rule set // name can be omitted in formatter descriptions that consist // of only one rule set), copy it out into our "name" member // and delete it from the description if (description.charAt(0) == gPercent) { int32_t pos = description.indexOf(gColon); if (pos == -1) { // throw new IllegalArgumentException("Rule set name doesn't end in colon"); status = U_PARSE_ERROR; } else { name.setTo(description, 0, pos); while (pos < description.length() && uprv_isRuleWhiteSpace(description.charAt(++pos))) { } description.remove(0, pos); } } else { name.setTo(UNICODE_STRING_SIMPLE("%default")); } if (description.length() == 0) { // throw new IllegalArgumentException("Empty rule set description"); status = U_PARSE_ERROR; } fIsPublic = name.indexOf(gPercentPercent) != 0; // all of the other members of NFRuleSet are initialized // by parseRules() }
/** * Convert a string to an unsigned decimal, ignoring rule whitespace. * @return a non-negative number if successful, or a negative number * upon failure. */ static int32_t stou(const UnicodeString& string) { int32_t n = 0; int32_t count = 0; UChar32 c; for (int32_t i=0; i<string.length(); i+=U16_LENGTH(c)) { c = string.char32At(i); if (uprv_isRuleWhiteSpace(c)) { continue; } int32_t d = u_digit(c, 10); if (d < 0 || ++count > 10) { return -1; } n = 10*n + d; } return n; }
/** * Parse a pattern string starting at offset pos. Keywords are * matched case-insensitively. Spaces may be skipped and may be * optional or required. Integer values may be parsed, and if * they are, they will be returned in the given array. If * successful, the offset of the next non-space character is * returned. On failure, -1 is returned. * @param pattern must only contain lowercase characters, which * will match their uppercase equivalents as well. A space * character matches one or more required spaces. A '~' character * matches zero or more optional spaces. A '#' character matches * an integer and stores it in parsedInts, which the caller must * ensure has enough capacity. * @param parsedInts array to receive parsed integers. Caller * must ensure that parsedInts.length is >= the number of '#' * signs in 'pattern'. * @return the position after the last character parsed, or -1 if * the parse failed */ int32_t ICU_Utility::parsePattern(const UnicodeString& rule, int32_t pos, int32_t limit, const UnicodeString& pattern, int32_t* parsedInts) { // TODO Update this to handle surrogates int32_t p; int32_t intCount = 0; // number of integers parsed for (int32_t i=0; i<pattern.length(); ++i) { UChar cpat = pattern.charAt(i); UChar c; switch (cpat) { case 32 /*' '*/: if (pos >= limit) { return -1; } c = rule.charAt(pos++); if (!uprv_isRuleWhiteSpace(c)) { return -1; } // FALL THROUGH to skipWhitespace case 126 /*'~'*/: pos = skipWhitespace(rule, pos); break; case 35 /*'#'*/: p = pos; parsedInts[intCount++] = parseInteger(rule, p, limit); if (p == pos) { // Syntax error; failed to parse integer return -1; } pos = p; break; default: if (pos >= limit) { return -1; } c = (UChar) u_tolower(rule.charAt(pos++)); if (c != cpat) { return -1; } break; } } return pos; }
void RuleBasedNumberFormat::stripWhitespace(UnicodeString& description) { // iterate through the characters... UnicodeString result; int start = 0; while (start != -1 && start < description.length()) { // seek to the first non-whitespace character... while (start < description.length() && uprv_isRuleWhiteSpace(description.charAt(start))) { ++start; } // locate the next semicolon in the text and copy the text from // our current position up to that semicolon into the result int32_t p = description.indexOf(gSemiColon, start); if (p == -1) { // or if we don't find a semicolon, just copy the rest of // the string into the result result.append(description, start, description.length() - start); start = -1; } else if (p < description.length()) { result.append(description, start, p + 1 - start); start = p + 1; } // when we get here, we've seeked off the end of the sring, and // we terminate the loop (we continue until *start* is -1 rather // than until *p* is -1, because otherwise we'd miss the last // rule in the description) else { start = -1; } } description.setTo(result); }
/** * Implements {@link Transliterator#handleTransliterate}. */ void NameUnicodeTransliterator::handleTransliterate(Replaceable& text, UTransPosition& offsets, UBool isIncremental) const { // The failure mode, here and below, is to behave like Any-Null, // if either there is no name data (max len == 0) or there is no // memory (malloc() => NULL). int32_t maxLen = uprv_getMaxCharNameLength(); if (maxLen == 0) { offsets.start = offsets.limit; return; } // Accomodate the longest possible name ++maxLen; // allow for temporary trailing space char* cbuf = (char*) uprv_malloc(maxLen); if (cbuf == NULL) { offsets.start = offsets.limit; return; } UnicodeString openPat(TRUE, OPEN, -1); UnicodeString str, name; int32_t cursor = offsets.start; int32_t limit = offsets.limit; // Modes: // 0 - looking for open delimiter // 1 - after open delimiter int32_t mode = 0; int32_t openPos = -1; // open delim candidate pos UChar32 c; while (cursor < limit) { c = text.char32At(cursor); switch (mode) { case 0: // looking for open delimiter if (c == OPEN_DELIM) { // quick check first openPos = cursor; int32_t i = ICU_Utility::parsePattern(openPat, text, cursor, limit); if (i >= 0 && i < limit) { mode = 1; name.truncate(0); cursor = i; continue; // *** reprocess char32At(cursor) } } break; case 1: // after open delimiter // Look for legal chars. If \s+ is found, convert it // to a single space. If closeDelimiter is found, exit // the loop. If any other character is found, exit the // loop. If the limit is reached, exit the loop. // Convert \s+ => SPACE. This assumes there are no // runs of >1 space characters in names. if (uprv_isRuleWhiteSpace(c)) { // Ignore leading whitespace if (name.length() > 0 && name.charAt(name.length()-1) != SPACE) { name.append(SPACE); // If we are too long then abort. maxLen includes // temporary trailing space, so use '>'. if (name.length() > maxLen) { mode = 0; } } break; } if (c == CLOSE_DELIM) { int32_t len = name.length(); // Delete trailing space, if any if (len > 0 && name.charAt(len-1) == SPACE) { --len; } if (uprv_isInvariantUString(name.getBuffer(), len)) { name.extract(0, len, cbuf, maxLen, US_INV); UErrorCode status = U_ZERO_ERROR; c = u_charFromName(U_EXTENDED_CHAR_NAME, cbuf, &status); if (U_SUCCESS(status)) { // Lookup succeeded // assert(UTF_CHAR_LENGTH(CLOSE_DELIM) == 1); cursor++; // advance over CLOSE_DELIM str.truncate(0); str.append(c); text.handleReplaceBetween(openPos, cursor, str); // Adjust indices for the change in the length of // the string. Do not assume that str.length() == // 1, in case of surrogates. int32_t delta = cursor - openPos - str.length(); cursor -= delta; limit -= delta; // assert(cursor == openPos + str.length()); } } // If the lookup failed, we leave things as-is and // still switch to mode 0 and continue. mode = 0; openPos = -1; // close off candidate continue; // *** reprocess char32At(cursor) } // Check if c is a legal char. We assume here that // legal.contains(OPEN_DELIM) is FALSE, so when we abort a // name, we don't have to go back to openPos+1. if (legal.contains(c)) { name.append(c); // If we go past the longest possible name then abort. // maxLen includes temporary trailing space, so use '>='. if (name.length() >= maxLen) { mode = 0; } } // Invalid character else { --cursor; // Backup and reprocess this character mode = 0; } break; } cursor += UTF_CHAR_LENGTH(c); } offsets.contextLimit += limit - offsets.limit; offsets.limit = limit; // In incremental mode, only advance the cursor up to the last // open delimiter candidate. offsets.start = (isIncremental && openPos >= 0) ? openPos : cursor; uprv_free(cbuf); }
UBool inList(UChar c, const UChar* list) const { if (*list == SPACE && uprv_isRuleWhiteSpace(c)) return TRUE; while (*list && *list != c) ++list; return *list == c; }
void skipWhitespace(void) { while (p < e && uprv_isRuleWhiteSpace(ch != 0xffff ? ch : *p)) inc();}
void RuleBasedNumberFormat::init(const UnicodeString& rules, LocalizationInfo* localizationInfos, UParseError& pErr, UErrorCode& status) { // TODO: implement UParseError uprv_memset(&pErr, 0, sizeof(UParseError)); // Note: this can leave ruleSets == NULL, so remaining code should check if (U_FAILURE(status)) { return; } this->localizations = localizationInfos == NULL ? NULL : localizationInfos->ref(); UnicodeString description(rules); if (!description.length()) { status = U_MEMORY_ALLOCATION_ERROR; return; } // start by stripping the trailing whitespace from all the rules // (this is all the whitespace follwing each semicolon in the // description). This allows us to look for rule-set boundaries // by searching for ";%" without having to worry about whitespace // between the ; and the % stripWhitespace(description); // check to see if there's a set of lenient-parse rules. If there // is, pull them out into our temporary holding place for them, // and delete them from the description before the real desciption- // parsing code sees them int32_t lp = description.indexOf(gLenientParse); if (lp != -1) { // we've got to make sure we're not in the middle of a rule // (where "%%lenient-parse" would actually get treated as // rule text) if (lp == 0 || description.charAt(lp - 1) == gSemiColon) { // locate the beginning and end of the actual collation // rules (there may be whitespace between the name and // the first token in the description) int lpEnd = description.indexOf(gSemiPercent, lp); if (lpEnd == -1) { lpEnd = description.length() - 1; } int lpStart = lp + u_strlen(gLenientParse); while (uprv_isRuleWhiteSpace(description.charAt(lpStart))) { ++lpStart; } // copy out the lenient-parse rules and delete them // from the description lenientParseRules = new UnicodeString(); /* test for NULL */ if (lenientParseRules == 0) { status = U_MEMORY_ALLOCATION_ERROR; return; } lenientParseRules->setTo(description, lpStart, lpEnd - lpStart); description.remove(lp, lpEnd + 1 - lp); } } // pre-flight parsing the description and count the number of // rule sets (";%" marks the end of one rule set and the beginning // of the next) int numRuleSets = 0; for (int32_t p = description.indexOf(gSemiPercent); p != -1; p = description.indexOf(gSemiPercent, p)) { ++numRuleSets; ++p; } ++numRuleSets; // our rule list is an array of the appropriate size ruleSets = (NFRuleSet **)uprv_malloc((numRuleSets + 1) * sizeof(NFRuleSet *)); /* test for NULL */ if (ruleSets == 0) { status = U_MEMORY_ALLOCATION_ERROR; return; } for (int i = 0; i <= numRuleSets; ++i) { ruleSets[i] = NULL; } // divide up the descriptions into individual rule-set descriptions // and store them in a temporary array. At each step, we also // new up a rule set, but all this does is initialize its name // and remove it from its description. We can't actually parse // the rest of the descriptions and finish initializing everything // because we have to know the names and locations of all the rule // sets before we can actually set everything up if(!numRuleSets) { status = U_ILLEGAL_ARGUMENT_ERROR; return; } UnicodeString* ruleSetDescriptions = new UnicodeString[numRuleSets]; if (ruleSetDescriptions == 0) { status = U_MEMORY_ALLOCATION_ERROR; return; } { int curRuleSet = 0; int32_t start = 0; for (int32_t p = description.indexOf(gSemiPercent); p != -1; p = description.indexOf(gSemiPercent, start)) { ruleSetDescriptions[curRuleSet].setTo(description, start, p + 1 - start); ruleSets[curRuleSet] = new NFRuleSet(ruleSetDescriptions, curRuleSet, status); if (ruleSets[curRuleSet] == 0) { status = U_MEMORY_ALLOCATION_ERROR; goto cleanup; } ++curRuleSet; start = p + 1; } ruleSetDescriptions[curRuleSet].setTo(description, start, description.length() - start); ruleSets[curRuleSet] = new NFRuleSet(ruleSetDescriptions, curRuleSet, status); if (ruleSets[curRuleSet] == 0) { status = U_MEMORY_ALLOCATION_ERROR; goto cleanup; } } // now we can take note of the formatter's default rule set, which // is the last public rule set in the description (it's the last // rather than the first so that a user can create a new formatter // from an existing formatter and change its default behavior just // by appending more rule sets to the end) // {dlf} Initialization of a fraction rule set requires the default rule // set to be known. For purposes of initialization, this is always the // last public rule set, no matter what the localization data says. initDefaultRuleSet(); // finally, we can go back through the temporary descriptions // list and finish seting up the substructure (and we throw // away the temporary descriptions as we go) { for (int i = 0; i < numRuleSets; i++) { ruleSets[i]->parseRules(ruleSetDescriptions[i], this, status); } } // Now that the rules are initialized, the 'real' default rule // set can be adjusted by the localization data. // The C code keeps the localization array as is, rather than building // a separate array of the public rule set names, so we have less work // to do here-- but we still need to check the names. if (localizationInfos) { // confirm the names, if any aren't in the rules, that's an error // it is ok if the rules contain public rule sets that are not in this list for (int32_t i = 0; i < localizationInfos->getNumberOfRuleSets(); ++i) { UnicodeString name(TRUE, localizationInfos->getRuleSetName(i), -1); NFRuleSet* rs = findRuleSet(name, status); if (rs == NULL) { break; // error } if (i == 0) { defaultRuleSet = rs; } } } else { defaultRuleSet = getDefaultRuleSet(); } cleanup: delete[] ruleSetDescriptions; }