static int
cdce_attach(device_t dev)
{
struct cdce_softc *sc = device_get_softc(dev);
struct usb_ether *ue = &sc->sc_ue;
struct usb_attach_arg *uaa = device_get_ivars(dev);
struct usb_interface *iface;
const struct usb_cdc_union_descriptor *ud;
const struct usb_interface_descriptor *id;
const struct usb_cdc_ethernet_descriptor *ued;
const struct usb_config *pcfg;
int error;
uint8_t i;
uint8_t data_iface_no;
char eaddr_str[5 * ETHER_ADDR_LEN]; /* approx */
sc->sc_flags = USB_GET_DRIVER_INFO(uaa);
sc->sc_ue.ue_udev = uaa->device;
device_set_usb_desc(dev);
mtx_init(&sc->sc_mtx, device_get_nameunit(dev), NULL, MTX_DEF);
ud = usbd_find_descriptor
(uaa->device, NULL, uaa->info.bIfaceIndex,
UDESC_CS_INTERFACE, 0xFF, UDESCSUB_CDC_UNION, 0xFF);
if ((ud == NULL) || (ud->bLength < sizeof(*ud)) ||
(sc->sc_flags & CDCE_FLAG_NO_UNION)) {
DPRINTFN(1, "No union descriptor!\n");
sc->sc_ifaces_index[0] = uaa->info.bIfaceIndex;
sc->sc_ifaces_index[1] = uaa->info.bIfaceIndex;
goto alloc_transfers;
}
data_iface_no = ud->bSlaveInterface[0];
for (i = 0;; i++) {
iface = usbd_get_iface(uaa->device, i);
if (iface) {
id = usbd_get_interface_descriptor(iface);
if (id && (id->bInterfaceNumber == data_iface_no)) {
sc->sc_ifaces_index[0] = i;
sc->sc_ifaces_index[1] = uaa->info.bIfaceIndex;
usbd_set_parent_iface(uaa->device, i, uaa->info.bIfaceIndex);
break;
}
} else {
device_printf(dev, "no data interface found\n");
goto detach;
}
}
/*
* <quote>
*
* The Data Class interface of a networking device shall have
* a minimum of two interface settings. The first setting
* (the default interface setting) includes no endpoints and
* therefore no networking traffic is exchanged whenever the
* default interface setting is selected. One or more
* additional interface settings are used for normal
* operation, and therefore each includes a pair of endpoints
* (one IN, and one OUT) to exchange network traffic. Select
* an alternate interface setting to initialize the network
* aspects of the device and to enable the exchange of
* network traffic.
*
* </quote>
*
* Some devices, most notably cable modems, include interface
* settings that have no IN or OUT endpoint, therefore loop
* through the list of all available interface settings
* looking for one with both IN and OUT endpoints.
*/
alloc_transfers:
pcfg = cdce_config; /* Default Configuration */
for (i = 0; i != 32; i++) {
error = usbd_set_alt_interface_index(uaa->device,
sc->sc_ifaces_index[0], i);
if (error)
break;
#if CDCE_HAVE_NCM
if ((i == 0) && (cdce_ncm_init(sc) == 0))
pcfg = cdce_ncm_config;
#endif
error = usbd_transfer_setup(uaa->device,
sc->sc_ifaces_index, sc->sc_xfer,
pcfg, CDCE_N_TRANSFER, sc, &sc->sc_mtx);
if (error == 0)
break;
}
if (error || (i == 32)) {
device_printf(dev, "No valid alternate "
"setting found\n");
goto detach;
}
ued = usbd_find_descriptor
(uaa->device, NULL, uaa->info.bIfaceIndex,
UDESC_CS_INTERFACE, 0xFF, UDESCSUB_CDC_ENF, 0xFF);
if ((ued == NULL) || (ued->bLength < sizeof(*ued))) {
error = USB_ERR_INVAL;
} else {
error = usbd_req_get_string_any(uaa->device, NULL,
eaddr_str, sizeof(eaddr_str), ued->iMacAddress);
}
if (error) {
/* fake MAC address */
device_printf(dev, "faking MAC address\n");
sc->sc_ue.ue_eaddr[0] = 0x2a;
memcpy(&sc->sc_ue.ue_eaddr[1], &ticks, sizeof(uint32_t));
sc->sc_ue.ue_eaddr[5] = device_get_unit(dev);
} else {
memset(sc->sc_ue.ue_eaddr, 0, sizeof(sc->sc_ue.ue_eaddr));
for (i = 0; i != (ETHER_ADDR_LEN * 2); i++) {
char c = eaddr_str[i];
if ('0' <= c && c <= '9')
c -= '0';
else if (c != 0)
c -= 'A' - 10;
else
break;
c &= 0xf;
if ((i & 1) == 0)
c <<= 4;
sc->sc_ue.ue_eaddr[i / 2] |= c;
}
if (uaa->usb_mode == USB_MODE_DEVICE) {
/*
* Do not use the same MAC address like the peer !
*/
sc->sc_ue.ue_eaddr[5] ^= 0xFF;
}
}
ue->ue_sc = sc;
ue->ue_dev = dev;
ue->ue_udev = uaa->device;
ue->ue_mtx = &sc->sc_mtx;
ue->ue_methods = &cdce_ue_methods;
error = uether_ifattach(ue);
if (error) {
device_printf(dev, "could not attach interface\n");
goto detach;
}
return (0); /* success */
detach:
cdce_detach(dev);
return (ENXIO); /* failure */
}
void
uticom_attach(struct device *parent, struct device *self, void *aux)
{
struct uticom_softc *sc = (struct uticom_softc *)self;
struct usb_attach_arg *uaa = aux;
usbd_device_handle dev = uaa->device;
usbd_interface_handle iface;
usb_config_descriptor_t *cdesc;
usb_interface_descriptor_t *id;
usb_endpoint_descriptor_t *ed;
usbd_status err;
int status, i;
usb_device_descriptor_t *dd;
struct ucom_attach_args uca;
sc->sc_udev = dev;
sc->sc_iface = uaa->iface;
/* Initialize endpoints. */
uca.bulkin = uca.bulkout = -1;
sc->sc_intr_number = -1;
sc->sc_intr_pipe = NULL;
dd = usbd_get_device_descriptor(dev);
DPRINTF(("%s: uticom_attach: num of configurations %d\n",
sc->sc_dev.dv_xname, dd->bNumConfigurations));
/* The device without firmware has single configuration with single
* bulk out interface. */
if (dd->bNumConfigurations > 1)
goto fwload_done;
/* Loading firmware. */
DPRINTF(("%s: uticom_attach: starting loading firmware\n",
sc->sc_dev.dv_xname));
err = usbd_set_config_index(dev, UTICOM_CONFIG_INDEX, 1);
if (err) {
printf("%s: failed to set configuration: %s\n",
sc->sc_dev.dv_xname, usbd_errstr(err));
sc->sc_dying = 1;
return;
}
/* Get the config descriptor. */
cdesc = usbd_get_config_descriptor(sc->sc_udev);
if (cdesc == NULL) {
printf("%s: failed to get configuration descriptor\n",
sc->sc_dev.dv_xname);
sc->sc_dying = 1;
return;
}
err = usbd_device2interface_handle(dev, UTICOM_IFACE_INDEX,
&sc->sc_iface);
if (err) {
printf("%s: failed to get interface: %s\n",
sc->sc_dev.dv_xname, usbd_errstr(err));
sc->sc_dying = 1;
return;
}
/* Find the bulk out interface used to upload firmware. */
id = usbd_get_interface_descriptor(sc->sc_iface);
sc->sc_iface_number = id->bInterfaceNumber;
for (i = 0; i < id->bNumEndpoints; i++) {
ed = usbd_interface2endpoint_descriptor(sc->sc_iface, i);
if (ed == NULL) {
printf("%s: no endpoint descriptor for %d\n",
sc->sc_dev.dv_xname, i);
sc->sc_dying = 1;
return;
}
if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_OUT &&
UE_GET_XFERTYPE(ed->bmAttributes) == UE_BULK) {
uca.bulkout = ed->bEndpointAddress;
DPRINTF(("%s: uticom_attach: data bulk out num: %d\n",
sc->sc_dev.dv_xname, ed->bEndpointAddress));
}
if (uca.bulkout == -1) {
printf("%s: could not find data bulk out\n",
sc->sc_dev.dv_xname);
sc->sc_dying = 1;
return;
}
}
status = uticom_download_fw(sc, uca.bulkout, dev);
if (status) {
printf("%s: firmware download failed\n",
sc->sc_dev.dv_xname);
sc->sc_dying = 1;
return;
} else {
printf("%s: firmware download succeeded\n",
sc->sc_dev.dv_xname);
}
status = usbd_reload_device_desc(dev);
if (status) {
printf("%s: error reloading device descriptor\n",
sc->sc_dev.dv_xname);
sc->sc_dying = 1;
return;
}
fwload_done:
dd = usbd_get_device_descriptor(dev);
DPRINTF(("%s: uticom_attach: num of configurations %d\n",
sc->sc_dev.dv_xname, dd->bNumConfigurations));
err = usbd_set_config_index(dev, UTICOM_ACTIVE_INDEX, 1);
if (err) {
printf("%s: failed to set configuration: %s\n",
sc->sc_dev.dv_xname, usbd_errstr(err));
sc->sc_dying = 1;
return;
}
/* Get the config descriptor. */
cdesc = usbd_get_config_descriptor(sc->sc_udev);
if (cdesc == NULL) {
printf("%s: failed to get configuration descriptor\n",
sc->sc_dev.dv_xname);
sc->sc_dying = 1;
return;
}
/* Get the interface (XXX: multiport chips are not supported yet). */
err = usbd_device2interface_handle(dev, UTICOM_IFACE_INDEX,
&sc->sc_iface);
if (err) {
printf("failed to get interface: %s\n",
sc->sc_dev.dv_xname, usbd_errstr(err));
sc->sc_dying = 1;
return;
}
/* Find the interrupt endpoints. */
id = usbd_get_interface_descriptor(sc->sc_iface);
sc->sc_iface_number = id->bInterfaceNumber;
for (i = 0; i < id->bNumEndpoints; i++) {
ed = usbd_interface2endpoint_descriptor(sc->sc_iface, i);
if (ed == NULL) {
printf("no endpoint descriptor for %d\n",
sc->sc_dev.dv_xname, i);
sc->sc_dying = 1;
return;
}
if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN &&
UE_GET_XFERTYPE(ed->bmAttributes) == UE_INTERRUPT) {
sc->sc_intr_number = ed->bEndpointAddress;
sc->sc_isize = UGETW(ed->wMaxPacketSize);
}
}
if (sc->sc_intr_number == -1) {
printf("%s: could not find interrupt in\n",
sc->sc_dev.dv_xname);
sc->sc_dying = 1;
return;
}
/* Keep interface for interrupt. */
sc->sc_intr_iface = sc->sc_iface;
/* Find the bulk{in,out} endpoints. */
id = usbd_get_interface_descriptor(sc->sc_iface);
sc->sc_iface_number = id->bInterfaceNumber;
for (i = 0; i < id->bNumEndpoints; i++) {
ed = usbd_interface2endpoint_descriptor(iface, i);
if (ed == NULL) {
printf("%s: no endpoint descriptor for %d\n",
sc->sc_dev.dv_xname, i);
sc->sc_dying = 1;
return;
}
if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN &&
UE_GET_XFERTYPE(ed->bmAttributes) == UE_BULK) {
uca.bulkin = ed->bEndpointAddress;
} else if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_OUT &&
UE_GET_XFERTYPE(ed->bmAttributes) == UE_BULK) {
uca.bulkout = ed->bEndpointAddress;
}
}
if (uca.bulkin == -1) {
printf("%s: could not find data bulk in\n",
sc->sc_dev.dv_xname);
sc->sc_dying = 1;
return;
}
if (uca.bulkout == -1) {
printf("%s: could not find data bulk out\n",
sc->sc_dev.dv_xname);
sc->sc_dying = 1;
return;
}
sc->sc_dtr = sc->sc_rts = -1;
uca.portno = UCOM_UNK_PORTNO;
uca.ibufsize = UTICOM_IBUFSZ;
uca.obufsize = UTICOM_OBUFSZ;
uca.ibufsizepad = UTICOM_IBUFSZ;
uca.device = dev;
uca.iface = iface;
uca.opkthdrlen = 0;
uca.methods = &uticom_methods;
uca.arg = sc;
uca.info = NULL;
err = uticom_reset(sc);
if (err) {
printf("%s: reset failed: %s\n",
sc->sc_dev.dv_xname, usbd_errstr(err));
sc->sc_dying = 1;
return;
}
DPRINTF(("%s: uticom_attach: in = 0x%x, out = 0x%x, intr = 0x%x\n",
sc->sc_dev.dv_xname, uca.bulkin,
uca.bulkout, sc->sc_intr_number));
sc->sc_subdev = config_found_sm(self, &uca, ucomprint, ucomsubmatch);
}
void
kue_attachhook(void *xsc)
{
struct kue_softc *sc = xsc;
int s;
struct ifnet *ifp;
usbd_device_handle dev = sc->kue_udev;
usbd_interface_handle iface;
usbd_status err;
usb_interface_descriptor_t *id;
usb_endpoint_descriptor_t *ed;
int i;
/* Load the firmware into the NIC. */
if (kue_load_fw(sc)) {
printf("%s: loading firmware failed\n",
USBDEVNAME(sc->kue_dev));
USB_ATTACH_ERROR_RETURN;
}
err = usbd_device2interface_handle(dev, KUE_IFACE_IDX, &iface);
if (err) {
printf("%s: getting interface handle failed\n",
USBDEVNAME(sc->kue_dev));
USB_ATTACH_ERROR_RETURN;
}
sc->kue_iface = iface;
id = usbd_get_interface_descriptor(iface);
/* Find endpoints. */
for (i = 0; i < id->bNumEndpoints; i++) {
ed = usbd_interface2endpoint_descriptor(iface, i);
if (ed == NULL) {
printf("%s: couldn't get ep %d\n",
USBDEVNAME(sc->kue_dev), i);
USB_ATTACH_ERROR_RETURN;
}
if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN &&
UE_GET_XFERTYPE(ed->bmAttributes) == UE_BULK) {
sc->kue_ed[KUE_ENDPT_RX] = ed->bEndpointAddress;
} else if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_OUT &&
UE_GET_XFERTYPE(ed->bmAttributes) == UE_BULK) {
sc->kue_ed[KUE_ENDPT_TX] = ed->bEndpointAddress;
} else if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN &&
UE_GET_XFERTYPE(ed->bmAttributes) == UE_INTERRUPT) {
sc->kue_ed[KUE_ENDPT_INTR] = ed->bEndpointAddress;
}
}
if (sc->kue_ed[KUE_ENDPT_RX] == 0 || sc->kue_ed[KUE_ENDPT_TX] == 0) {
printf("%s: missing endpoint\n", USBDEVNAME(sc->kue_dev));
USB_ATTACH_ERROR_RETURN;
}
/* Read ethernet descriptor */
err = kue_ctl(sc, KUE_CTL_READ, KUE_CMD_GET_ETHER_DESCRIPTOR,
0, &sc->kue_desc, sizeof(sc->kue_desc));
if (err) {
printf("%s: could not read Ethernet descriptor\n",
USBDEVNAME(sc->kue_dev));
USB_ATTACH_ERROR_RETURN;
}
sc->kue_mcfilters = malloc(KUE_MCFILTCNT(sc) * ETHER_ADDR_LEN,
M_USBDEV, M_NOWAIT);
if (sc->kue_mcfilters == NULL) {
printf("%s: no memory for multicast filter buffer\n",
USBDEVNAME(sc->kue_dev));
USB_ATTACH_ERROR_RETURN;
}
s = splnet();
/*
* A KLSI chip was detected. Inform the world.
*/
printf("%s: address %s\n", USBDEVNAME(sc->kue_dev),
ether_sprintf(sc->kue_desc.kue_macaddr));
#if defined(__OpenBSD__)
bcopy(sc->kue_desc.kue_macaddr,
(char *)&sc->arpcom.ac_enaddr, ETHER_ADDR_LEN);
#endif
/* Initialize interface info.*/
ifp = GET_IFP(sc);
ifp->if_softc = sc;
ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST;
ifp->if_ioctl = kue_ioctl;
ifp->if_start = kue_start;
ifp->if_watchdog = kue_watchdog;
strlcpy(ifp->if_xname, USBDEVNAME(sc->kue_dev), IFNAMSIZ);
IFQ_SET_READY(&ifp->if_snd);
/* Attach the interface. */
if_attach(ifp);
Ether_ifattach(ifp, sc->kue_desc.kue_macaddr);
sc->kue_attached = 1;
splx(s);
}
static int
send_bulkmsg(usbd_device_handle dev, char *cmd, size_t cmdlen)
{
usbd_interface_handle iface;
usb_interface_descriptor_t *id;
usb_endpoint_descriptor_t *ed;
usbd_pipe_handle pipe;
usbd_xfer_handle xfer;
int err, i;
/* Move the device into the configured state. */
err = usbd_set_config_index(dev, 0, 0);
if (err) {
aprint_error("u3g: failed to set configuration index\n");
return UMATCH_NONE;
}
err = usbd_device2interface_handle(dev, 0, &iface);
if (err != 0) {
aprint_error("u3ginit: failed to get interface\n");
return UMATCH_NONE;
}
id = usbd_get_interface_descriptor(iface);
ed = NULL;
for (i = 0 ; i < id->bNumEndpoints ; i++) {
ed = usbd_interface2endpoint_descriptor(iface, i);
if (ed == NULL)
continue;
if (UE_GET_DIR(ed->bEndpointAddress) != UE_DIR_OUT)
continue;
if ((ed->bmAttributes & UE_XFERTYPE) == UE_BULK)
break;
}
if (i == id->bNumEndpoints)
return UMATCH_NONE;
err = usbd_open_pipe(iface, ed->bEndpointAddress,
USBD_EXCLUSIVE_USE, &pipe);
if (err != 0) {
aprint_error("u3ginit: failed to open bulk transfer pipe %d\n",
ed->bEndpointAddress);
return UMATCH_NONE;
}
xfer = usbd_alloc_xfer(dev);
if (xfer != NULL) {
usbd_setup_xfer(xfer, pipe, NULL, cmd, cmdlen,
USBD_SYNCHRONOUS, USBD_DEFAULT_TIMEOUT, NULL);
err = usbd_transfer(xfer);
#if 0 /* XXXpooka: at least my huawei "fails" this always, but still detaches */
if (err)
aprint_error("u3ginit: transfer failed\n");
#else
err = 0;
#endif
usbd_free_xfer(xfer);
} else {
aprint_error("u3ginit: failed to allocate xfer\n");
err = USBD_NOMEM;
}
usbd_abort_pipe(pipe);
usbd_close_pipe(pipe);
return (err == USBD_NORMAL_COMPLETION ? UMATCH_HIGHEST : UMATCH_NONE);
}
static void
u3g_attach(device_t parent, device_t self, void *aux)
{
struct u3g_softc *sc = device_private(self);
struct usbif_attach_arg *uaa = aux;
usbd_device_handle dev = uaa->device;
usbd_interface_handle iface;
usb_interface_descriptor_t *id;
usb_endpoint_descriptor_t *ed;
struct ucom_attach_args uca;
usbd_status error;
int n, intr_address, intr_size;
aprint_naive("\n");
aprint_normal("\n");
sc->sc_dev = self;
sc->sc_dying = false;
sc->sc_udev = dev;
error = usbd_device2interface_handle(dev, uaa->ifaceno, &iface);
if (error) {
aprint_error_dev(self, "failed to get interface, err=%s\n",
usbd_errstr(error));
return;
}
id = usbd_get_interface_descriptor(iface);
uca.info = "3G Modem";
uca.ibufsize = U3G_BUFF_SIZE;
uca.obufsize = U3G_BUFF_SIZE;
uca.ibufsizepad = U3G_BUFF_SIZE;
uca.portno = uaa->ifaceno;
uca.opkthdrlen = 0;
uca.device = dev;
uca.iface = iface;
uca.methods = &u3g_methods;
uca.arg = sc;
uca.bulkin = uca.bulkout = -1;
sc->sc_outpins = 0;
sc->sc_msr = UMSR_DSR | UMSR_CTS | UMSR_DCD;
sc->sc_ifaceno = uaa->ifaceno;
sc->sc_open = false;
sc->sc_purging = false;
intr_address = -1;
intr_size = 0;
for (n = 0; n < id->bNumEndpoints; n++) {
ed = usbd_interface2endpoint_descriptor(iface, n);
if (ed == NULL) {
aprint_error_dev(self, "no endpoint descriptor "
"for %d (interface: %d)\n", n, sc->sc_ifaceno);
sc->sc_dying = true;
return;
}
if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN &&
UE_GET_XFERTYPE(ed->bmAttributes) == UE_INTERRUPT) {
intr_address = ed->bEndpointAddress;
intr_size = UGETW(ed->wMaxPacketSize);
} else
if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN &&
UE_GET_XFERTYPE(ed->bmAttributes) == UE_BULK) {
uca.bulkin = ed->bEndpointAddress;
} else
if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_OUT &&
UE_GET_XFERTYPE(ed->bmAttributes) == UE_BULK) {
uca.bulkout = ed->bEndpointAddress;
}
}
if (uca.bulkin == -1) {
aprint_error_dev(self, "Missing bulk in for interface %d\n",
sc->sc_ifaceno);
sc->sc_dying = true;
return;
}
if (uca.bulkout == -1) {
aprint_error_dev(self, "Missing bulk out for interface %d\n",
sc->sc_ifaceno);
sc->sc_dying = true;
return;
}
sc->sc_ucom = config_found_sm_loc(self, "ucombus",
NULL, &uca, ucomprint, ucomsubmatch);
/*
* If the interface has an interrupt pipe, open it immediately so
* that we can track input pin state changes regardless of whether
* the tty(4) device is open or not.
*/
if (intr_address != -1) {
sc->sc_intr_buff = malloc(intr_size, M_USBDEV, M_WAITOK);
error = usbd_open_pipe_intr(iface, intr_address,
USBD_SHORT_XFER_OK, &sc->sc_intr_pipe, sc, sc->sc_intr_buff,
intr_size, u3g_intr, 100);
if (error) {
aprint_error_dev(self, "cannot open interrupt pipe "
"(addr %d)\n", intr_address);
return;
}
} else {
sc->sc_intr_pipe = NULL;
sc->sc_intr_buff = NULL;
}
if (!pmf_device_register(self, NULL, NULL))
aprint_error_dev(self, "couldn't establish power handler\n");
}
static usbd_status
alloc_all_endpoints_yamaha(struct umidi_softc *sc)
{
/* This driver currently supports max 1in/1out bulk endpoints */
usb_descriptor_t *desc;
usb_endpoint_descriptor_t *epd;
int out_addr, in_addr, in_packetsize, i, dir;
size_t remain, descsize;
out_addr = in_addr = 0;
/* detect endpoints */
desc = TO_D(usbd_get_interface_descriptor(sc->sc_iface));
for (i=(int)TO_IFD(desc)->bNumEndpoints-1; i>=0; i--) {
epd = usbd_interface2endpoint_descriptor(sc->sc_iface, i);
if (UE_GET_XFERTYPE(epd->bmAttributes) == UE_BULK) {
dir = UE_GET_DIR(epd->bEndpointAddress);
if (dir==UE_DIR_OUT && !out_addr)
out_addr = epd->bEndpointAddress;
else if (dir==UE_DIR_IN && !in_addr) {
in_addr = epd->bEndpointAddress;
in_packetsize = UGETW(epd->wMaxPacketSize);
}
}
}
desc = NEXT_D(desc);
/* count jacks */
if (!(desc->bDescriptorType==UDESC_CS_INTERFACE &&
desc->bDescriptorSubtype==UMIDI_MS_HEADER))
return USBD_INVAL;
remain = (size_t)UGETW(TO_CSIFD(desc)->wTotalLength) -
(size_t)desc->bLength;
desc = NEXT_D(desc);
while (remain>=sizeof(usb_descriptor_t)) {
descsize = desc->bLength;
if (descsize>remain || descsize==0)
break;
if (desc->bDescriptorType==UDESC_CS_INTERFACE &&
remain>=UMIDI_JACK_DESCRIPTOR_SIZE) {
if (desc->bDescriptorSubtype==UMIDI_OUT_JACK)
sc->sc_out_num_jacks++;
else if (desc->bDescriptorSubtype==UMIDI_IN_JACK)
sc->sc_in_num_jacks++;
}
desc = NEXT_D(desc);
remain-=descsize;
}
/* validate some parameters */
if (sc->sc_out_num_jacks>UMIDI_MAX_EPJACKS)
sc->sc_out_num_jacks = UMIDI_MAX_EPJACKS;
if (sc->sc_in_num_jacks>UMIDI_MAX_EPJACKS)
sc->sc_in_num_jacks = UMIDI_MAX_EPJACKS;
if (sc->sc_out_num_jacks && out_addr)
sc->sc_out_num_endpoints = 1;
else {
sc->sc_out_num_endpoints = 0;
sc->sc_out_num_jacks = 0;
}
if (sc->sc_in_num_jacks && in_addr)
sc->sc_in_num_endpoints = 1;
else {
sc->sc_in_num_endpoints = 0;
sc->sc_in_num_jacks = 0;
}
sc->sc_endpoints = mallocarray(sc->sc_out_num_endpoints +
sc->sc_in_num_endpoints, sizeof(struct umidi_endpoint),
M_USBDEV, M_WAITOK | M_CANFAIL);
if (!sc->sc_endpoints)
return USBD_NOMEM;
if (sc->sc_out_num_endpoints) {
sc->sc_out_ep = sc->sc_endpoints;
sc->sc_out_ep->sc = sc;
sc->sc_out_ep->addr = out_addr;
sc->sc_out_ep->packetsize = UGETW(epd->wMaxPacketSize);
sc->sc_out_ep->num_jacks = sc->sc_out_num_jacks;
sc->sc_out_ep->num_open = 0;
memset(sc->sc_out_ep->jacks, 0, sizeof(sc->sc_out_ep->jacks));
} else
sc->sc_out_ep = NULL;
if (sc->sc_in_num_endpoints) {
sc->sc_in_ep = sc->sc_endpoints+sc->sc_out_num_endpoints;
sc->sc_in_ep->sc = sc;
sc->sc_in_ep->addr = in_addr;
sc->sc_in_ep->packetsize = in_packetsize;
sc->sc_in_ep->num_jacks = sc->sc_in_num_jacks;
sc->sc_in_ep->num_open = 0;
memset(sc->sc_in_ep->jacks, 0, sizeof(sc->sc_in_ep->jacks));
} else
sc->sc_in_ep = NULL;
return USBD_NORMAL_COMPLETION;
}
/*
* Attach the interface. Allocate softc structures, do ifmedia
* setup and ethernet/BPF attach.
*/
void
wi_usb_attach(struct device *parent, struct device *self, void *aux)
{
struct wi_usb_softc *sc = (struct wi_usb_softc *)self;
struct usb_attach_arg *uaa = aux;
/* int s; */
usbd_device_handle dev = uaa->device;
usbd_interface_handle iface;
usbd_status err;
usb_interface_descriptor_t *id;
usb_endpoint_descriptor_t *ed;
int i;
DPRINTFN(5,(" : wi_usb_attach: sc=%p", sc));
err = usbd_set_config_no(dev, WI_USB_CONFIG_NO, 1);
if (err) {
printf("%s: setting config no failed\n", sc->wi_usb_dev.dv_xname);
return;
}
/* XXX - any tasks? */
err = usbd_device2interface_handle(dev, WI_USB_IFACE_IDX, &iface);
if (err) {
printf("%s: getting interface handle failed\n",
sc->wi_usb_dev.dv_xname);
return;
}
/* XXX - flags? */
sc->wi_usb_udev = dev;
sc->wi_usb_iface = iface;
sc->wi_usb_product = uaa->product;
sc->wi_usb_vendor = uaa->vendor;
sc->sc_wi.wi_usb_cdata = sc;
sc->sc_wi.wi_flags |= WI_FLAGS_BUS_USB;
sc->wi_lock = 0;
sc->wi_lockwait = 0;
sc->wi_resetonce = 0;
id = usbd_get_interface_descriptor(iface);
/* Find endpoints. */
for (i = 0; i < id->bNumEndpoints; i++) {
ed = usbd_interface2endpoint_descriptor(iface, i);
if (ed == NULL) {
printf("%s: couldn't get endpoint descriptor %d\n",
sc->wi_usb_dev.dv_xname, i);
return;
}
if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN &&
UE_GET_XFERTYPE(ed->bmAttributes) == UE_BULK) {
sc->wi_usb_ed[WI_USB_ENDPT_RX] = ed->bEndpointAddress;
} else if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_OUT &&
UE_GET_XFERTYPE(ed->bmAttributes) == UE_BULK) {
sc->wi_usb_ed[WI_USB_ENDPT_TX] = ed->bEndpointAddress;
} else if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN &&
UE_GET_XFERTYPE(ed->bmAttributes) == UE_INTERRUPT) {
sc->wi_usb_ed[WI_USB_ENDPT_INTR] = ed->bEndpointAddress;
}
}
sc->wi_usb_nummem = 0;
/* attach wi device */
if (wi_usb_rx_list_init(sc)) {
printf("%s: rx list init failed\n",
sc->wi_usb_dev.dv_xname);
return;
}
if (wi_usb_tx_list_init(sc)) {
printf("%s: tx list init failed\n",
sc->wi_usb_dev.dv_xname);
return;
}
if (wi_usb_open_pipes(sc)){
printf("%s: open pipes failed\n",
sc->wi_usb_dev.dv_xname);
return;
}
sc->wi_usb_attached = 1;
kthread_create_deferred(wi_usb_start_thread, sc);
}
void
uslcom_attach(struct device *parent, struct device *self, void *aux)
{
struct uslcom_softc *sc = (struct uslcom_softc *)self;
struct usb_attach_arg *uaa = aux;
struct ucom_attach_args uca;
usb_interface_descriptor_t *id;
usb_endpoint_descriptor_t *ed;
usbd_status error;
int i;
bzero(&uca, sizeof(uca));
sc->sc_udev = uaa->device;
if (usbd_set_config_index(sc->sc_udev, USLCOM_CONFIG_NO, 1) != 0) {
printf("%s: could not set configuration no\n",
sc->sc_dev.dv_xname);
sc->sc_dying = 1;
return;
}
/* get the first interface handle */
error = usbd_device2interface_handle(sc->sc_udev, USLCOM_IFACE_NO,
&sc->sc_iface);
if (error != 0) {
printf("%s: could not get interface handle\n",
sc->sc_dev.dv_xname);
sc->sc_dying = 1;
return;
}
id = usbd_get_interface_descriptor(sc->sc_iface);
uca.bulkin = uca.bulkout = -1;
for (i = 0; i < id->bNumEndpoints; i++) {
ed = usbd_interface2endpoint_descriptor(sc->sc_iface, i);
if (ed == NULL) {
printf("%s: no endpoint descriptor found for %d\n",
sc->sc_dev.dv_xname, i);
sc->sc_dying = 1;
return;
}
if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN &&
UE_GET_XFERTYPE(ed->bmAttributes) == UE_BULK)
uca.bulkin = ed->bEndpointAddress;
else if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_OUT &&
UE_GET_XFERTYPE(ed->bmAttributes) == UE_BULK)
uca.bulkout = ed->bEndpointAddress;
}
if (uca.bulkin == -1 || uca.bulkout == -1) {
printf("%s: missing endpoint\n", sc->sc_dev.dv_xname);
sc->sc_dying = 1;
return;
}
uca.ibufsize = USLCOMBUFSZ;
uca.obufsize = USLCOMBUFSZ;
uca.ibufsizepad = USLCOMBUFSZ;
uca.opkthdrlen = 0;
uca.device = sc->sc_udev;
uca.iface = sc->sc_iface;
uca.methods = &uslcom_methods;
uca.arg = sc;
uca.info = NULL;
sc->sc_subdev = config_found_sm(self, &uca, ucomprint, ucomsubmatch);
}
static int
usie_attach(device_t self)
{
struct usie_softc *sc = device_get_softc(self);
struct usb_attach_arg *uaa = device_get_ivars(self);
struct ifnet *ifp;
struct usb_interface *iface;
struct usb_interface_descriptor *id;
struct usb_device_request req;
int err;
uint16_t fwattr;
uint8_t iface_index;
uint8_t ifidx;
uint8_t start;
device_set_usb_desc(self);
sc->sc_udev = uaa->device;
sc->sc_dev = self;
mtx_init(&sc->sc_mtx, "usie", MTX_NETWORK_LOCK, MTX_DEF);
ucom_ref(&sc->sc_super_ucom);
TASK_INIT(&sc->sc_if_status_task, 0, usie_if_status_cb, sc);
TASK_INIT(&sc->sc_if_sync_task, 0, usie_if_sync_cb, sc);
usb_callout_init_mtx(&sc->sc_if_sync_ch, &sc->sc_mtx, 0);
mtx_lock(&sc->sc_mtx);
/* set power mode to D0 */
req.bmRequestType = UT_WRITE_VENDOR_DEVICE;
req.bRequest = USIE_POWER;
USETW(req.wValue, 0);
USETW(req.wIndex, 0);
USETW(req.wLength, 0);
if (usie_do_request(sc, &req, NULL)) {
mtx_unlock(&sc->sc_mtx);
goto detach;
}
/* read fw attr */
fwattr = 0;
req.bmRequestType = UT_READ_VENDOR_DEVICE;
req.bRequest = USIE_FW_ATTR;
USETW(req.wValue, 0);
USETW(req.wIndex, 0);
USETW(req.wLength, sizeof(fwattr));
if (usie_do_request(sc, &req, &fwattr)) {
mtx_unlock(&sc->sc_mtx);
goto detach;
}
mtx_unlock(&sc->sc_mtx);
/* check DHCP supports */
DPRINTF("fwattr=%x\n", fwattr);
if (!(fwattr & USIE_FW_DHCP)) {
device_printf(self, "DHCP is not supported. A firmware upgrade might be needed.\n");
}
/* find available interfaces */
sc->sc_nucom = 0;
for (ifidx = 0; ifidx < USIE_IFACE_MAX; ifidx++) {
iface = usbd_get_iface(uaa->device, ifidx);
if (iface == NULL)
break;
id = usbd_get_interface_descriptor(iface);
if ((id == NULL) || (id->bInterfaceClass != UICLASS_VENDOR))
continue;
/* setup Direct IP transfer */
if (id->bInterfaceNumber >= 7 && id->bNumEndpoints == 3) {
sc->sc_if_ifnum = id->bInterfaceNumber;
iface_index = ifidx;
DPRINTF("ifnum=%d, ifidx=%d\n",
sc->sc_if_ifnum, ifidx);
err = usbd_transfer_setup(uaa->device,
&iface_index, sc->sc_if_xfer, usie_if_config,
USIE_IF_N_XFER, sc, &sc->sc_mtx);
if (err == 0)
continue;
device_printf(self,
"could not allocate USB transfers on "
"iface_index=%d, err=%s\n",
iface_index, usbd_errstr(err));
goto detach;
}
/* setup ucom */
if (sc->sc_nucom >= USIE_UCOM_MAX)
continue;
usbd_set_parent_iface(uaa->device, ifidx,
uaa->info.bIfaceIndex);
DPRINTF("NumEndpoints=%d bInterfaceNumber=%d\n",
id->bNumEndpoints, id->bInterfaceNumber);
if (id->bNumEndpoints == 2) {
sc->sc_uc_xfer[sc->sc_nucom][0] = NULL;
start = 1;
} else
start = 0;
err = usbd_transfer_setup(uaa->device, &ifidx,
sc->sc_uc_xfer[sc->sc_nucom] + start,
usie_uc_config + start, USIE_UC_N_XFER - start,
&sc->sc_ucom[sc->sc_nucom], &sc->sc_mtx);
if (err != 0) {
DPRINTF("usbd_transfer_setup error=%s\n", usbd_errstr(err));
continue;
}
mtx_lock(&sc->sc_mtx);
for (; start < USIE_UC_N_XFER; start++)
usbd_xfer_set_stall(sc->sc_uc_xfer[sc->sc_nucom][start]);
mtx_unlock(&sc->sc_mtx);
sc->sc_uc_ifnum[sc->sc_nucom] = id->bInterfaceNumber;
sc->sc_nucom++; /* found a port */
}
if (sc->sc_nucom == 0) {
device_printf(self, "no comports found\n");
goto detach;
}
err = ucom_attach(&sc->sc_super_ucom, sc->sc_ucom,
sc->sc_nucom, sc, &usie_uc_callback, &sc->sc_mtx);
if (err != 0) {
DPRINTF("ucom_attach failed\n");
goto detach;
}
DPRINTF("Found %d interfaces.\n", sc->sc_nucom);
/* setup ifnet (Direct IP) */
sc->sc_ifp = ifp = if_alloc(IFT_OTHER);
if (ifp == NULL) {
device_printf(self, "Could not allocate a network interface\n");
goto detach;
}
if_initname(ifp, "usie", device_get_unit(self));
ifp->if_softc = sc;
ifp->if_mtu = USIE_MTU_MAX;
ifp->if_flags |= IFF_NOARP;
ifp->if_init = usie_if_init;
ifp->if_ioctl = usie_if_ioctl;
ifp->if_start = usie_if_start;
ifp->if_output = usie_if_output;
IFQ_SET_MAXLEN(&ifp->if_snd, ifqmaxlen);
ifp->if_snd.ifq_drv_maxlen = ifqmaxlen;
IFQ_SET_READY(&ifp->if_snd);
if_attach(ifp);
bpfattach(ifp, DLT_RAW, 0);
if (fwattr & USIE_PM_AUTO) {
usbd_set_power_mode(uaa->device, USB_POWER_MODE_SAVE);
DPRINTF("enabling automatic suspend and resume\n");
} else {
usbd_set_power_mode(uaa->device, USB_POWER_MODE_ON);
DPRINTF("USB power is always ON\n");
}
DPRINTF("device attached\n");
return (0);
detach:
usie_detach(self);
return (ENOMEM);
}
static int
u3g_novatel_reinit(struct usb_attach_arg *uaa)
{
unsigned char cmd[31];
usbd_interface_handle iface;
usb_interface_descriptor_t *id;
usb_endpoint_descriptor_t *ed;
usbd_pipe_handle pipe;
usbd_xfer_handle xfer;
int err, i;
memset(cmd, 0, sizeof(cmd));
/* Byte 0..3: Command Block Wrapper (CBW) signature */
cmd[0] = 0x55;
cmd[1] = 0x53;
cmd[2] = 0x42;
cmd[3] = 0x43;
/* 4..7: CBW Tag, has to unique, but only a single transfer used. */
cmd[4] = 0x01;
/* 8..11: CBW Transfer Length, no data here */
/* 12: CBW Flag: output, so 0 */
/* 13: CBW Lun: 0 */
/* 14: CBW Length */
cmd[14] = 0x06;
/* Rest is the SCSI payload */
/* 0: SCSI START/STOP opcode */
cmd[15] = 0x1b;
/* 1..3 unused */
/* 4 Load/Eject command */
cmd[19] = 0x02;
/* 5: unused */
/* Move the device into the configured state. */
err = usbd_set_config_index(uaa->device, 0, 0);
if (err) {
aprint_error("u3g: failed to set configuration index\n");
return UMATCH_NONE;
}
err = usbd_device2interface_handle(uaa->device, 0, &iface);
if (err != 0) {
aprint_error("u3g: failed to get interface\n");
return UMATCH_NONE;
}
id = usbd_get_interface_descriptor(iface);
ed = NULL;
for (i = 0 ; i < id->bNumEndpoints ; i++) {
ed = usbd_interface2endpoint_descriptor(iface, i);
if (ed == NULL)
continue;
if (UE_GET_DIR(ed->bEndpointAddress) != UE_DIR_OUT)
continue;
if ((ed->bmAttributes & UE_XFERTYPE) == UE_BULK)
break;
}
if (i == id->bNumEndpoints)
return UMATCH_NONE;
err = usbd_open_pipe(iface, ed->bEndpointAddress, USBD_EXCLUSIVE_USE,
&pipe);
if (err != 0) {
aprint_error("u3g: failed to open bulk transfer pipe %d\n",
ed->bEndpointAddress);
return UMATCH_NONE;
}
xfer = usbd_alloc_xfer(uaa->device);
if (xfer != NULL) {
usbd_setup_xfer(xfer, pipe, NULL, cmd, sizeof(cmd),
USBD_SYNCHRONOUS, USBD_DEFAULT_TIMEOUT, NULL);
err = usbd_transfer(xfer);
if (err)
aprint_error("u3g: transfer failed\n");
usbd_free_xfer(xfer);
} else {
aprint_error("u3g: failed to allocate xfer\n");
err = USBD_NOMEM;
}
usbd_abort_pipe(pipe);
usbd_close_pipe(pipe);
return (err == USBD_NORMAL_COMPLETION ? UMATCH_HIGHEST : UMATCH_NONE);
}
static void
u3g_attach(device_t parent, device_t self, void *aux)
{
struct u3g_softc *sc = device_private(self);
struct usb_attach_arg *uaa = aux;
usbd_device_handle dev = uaa->device;
usbd_interface_handle iface;
usb_interface_descriptor_t *id;
usb_endpoint_descriptor_t *ed;
usbd_status error;
int i, n;
usb_config_descriptor_t *cdesc;
aprint_naive("\n");
aprint_normal("\n");
if (uaa->vendor == USB_VENDOR_NOVATEL2 &&
uaa->product == USB_PRODUCT_NOVATEL2_MC950D_DRIVER) {
/* About to disappear... */
sc->sc_pseudodev = true;
return;
}
sc->sc_dev = self;
#ifdef U3G_DEBUG
sc->sc_intr_number = -1;
sc->sc_intr_pipe = NULL;
#endif
/* Move the device into the configured state. */
error = usbd_set_config_index(dev, 0, 1);
if (error) {
aprint_error_dev(self, "failed to set configuration: %s\n",
usbd_errstr(error));
return;
}
/* get the config descriptor */
cdesc = usbd_get_config_descriptor(dev);
if (cdesc == NULL) {
aprint_error_dev(self, "failed to get configuration descriptor\n");
return;
}
if (uaa->vendor == USB_VENDOR_HUAWEI && cdesc->bNumInterface > 1) {
/* About to disappear... */
sc->sc_pseudodev = true;
return;
}
if (uaa->vendor == USB_VENDOR_SIERRA &&
uaa->product == USB_PRODUCT_SIERRA_INSTALLER) {
/* About to disappear... */
sc->sc_pseudodev = true;
return;
}
sc->sc_udev = dev;
sc->numports = (cdesc->bNumInterface <= U3G_MAXPORTS)?cdesc->bNumInterface:U3G_MAXPORTS;
for ( i = 0; i < sc->numports; i++ ) {
struct ucom_attach_args uca;
error = usbd_device2interface_handle(dev, i, &iface);
if (error) {
aprint_error_dev(self,
"failed to get interface, err=%s\n",
usbd_errstr(error));
return;
}
id = usbd_get_interface_descriptor(iface);
uca.info = "Generic 3G Serial Device";
uca.ibufsize = U3GBUFSZ;
uca.obufsize = U3GBUFSZ;
uca.ibufsizepad = U3GBUFSZ;
uca.portno = i;
uca.opkthdrlen = 0;
uca.device = dev;
uca.iface = iface;
uca.methods = &u3g_methods;
uca.arg = sc;
uca.bulkin = uca.bulkout = -1;
for (n = 0; n < id->bNumEndpoints; n++) {
ed = usbd_interface2endpoint_descriptor(iface, n);
if (ed == NULL) {
aprint_error_dev(self,
"could not read endpoint descriptor\n");
return;
}
if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN &&
UE_GET_XFERTYPE(ed->bmAttributes) == UE_BULK)
uca.bulkin = ed->bEndpointAddress;
else if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_OUT &&
UE_GET_XFERTYPE(ed->bmAttributes) == UE_BULK)
uca.bulkout = ed->bEndpointAddress;
}
if (uca.bulkin == -1 || uca.bulkout == -1) {
aprint_error_dev(self, "missing endpoint\n");
return;
}
sc->sc_ucom[i] = config_found_sm_loc(self, "ucombus", NULL, &uca,
ucomprint, ucomsubmatch);
}
#ifdef U3G_DEBUG
if (sc->sc_intr_number != -1 && sc->sc_intr_pipe == NULL) {
sc->sc_intr_buf = malloc(sc->sc_isize, M_USBDEV, M_WAITOK);
error = usbd_open_pipe_intr(sc->sc_intr_iface,
sc->sc_intr_number,
USBD_SHORT_XFER_OK,
&sc->sc_intr_pipe,
sc,
sc->sc_intr_buf,
sc->sc_isize,
u3g_intr,
100);
if (error) {
aprint_error_dev(self,
"cannot open interrupt pipe (addr %d)\n",
sc->sc_intr_number);
return;
}
}
#endif
if (!pmf_device_register(self, NULL, NULL))
aprint_error_dev(self, "couldn't establish power handler\n");
}
void
umct_attach(struct device *parent, struct device *self, void *aux)
{
struct umct_softc *sc = (struct umct_softc *)self;
struct usb_attach_arg *uaa = aux;
struct usbd_device *dev = uaa->device;
usb_config_descriptor_t *cdesc;
usb_interface_descriptor_t *id;
usb_endpoint_descriptor_t *ed;
char *devname = sc->sc_dev.dv_xname;
usbd_status err;
int i;
struct ucom_attach_args uca;
sc->sc_udev = dev;
sc->sc_product = uaa->product;
DPRINTF(("\n\numct attach: sc=%p\n", sc));
/* initialize endpoints */
uca.bulkin = uca.bulkout = -1;
sc->sc_intr_number = -1;
sc->sc_intr_pipe = NULL;
/* Move the device into the configured state. */
err = usbd_set_config_index(dev, UMCT_CONFIG_INDEX, 1);
if (err) {
printf("\n%s: failed to set configuration, err=%s\n",
devname, usbd_errstr(err));
usbd_deactivate(sc->sc_udev);
return;
}
/* get the config descriptor */
cdesc = usbd_get_config_descriptor(sc->sc_udev);
if (cdesc == NULL) {
printf("%s: failed to get configuration descriptor\n",
sc->sc_dev.dv_xname);
usbd_deactivate(sc->sc_udev);
return;
}
/* get the interface */
err = usbd_device2interface_handle(dev, UMCT_IFACE_INDEX,
&sc->sc_iface);
if (err) {
printf("\n%s: failed to get interface, err=%s\n",
devname, usbd_errstr(err));
usbd_deactivate(sc->sc_udev);
return;
}
/* Find the bulk{in,out} and interrupt endpoints */
id = usbd_get_interface_descriptor(sc->sc_iface);
sc->sc_iface_number = id->bInterfaceNumber;
for (i = 0; i < id->bNumEndpoints; i++) {
ed = usbd_interface2endpoint_descriptor(sc->sc_iface, i);
if (ed == NULL) {
printf("%s: no endpoint descriptor for %d\n",
sc->sc_dev.dv_xname, i);
usbd_deactivate(sc->sc_udev);
return;
}
/*
* The Bulkin endpoint is marked as an interrupt. Since
* we can't rely on the endpoint descriptor order, we'll
* check the wMaxPacketSize field to differentiate.
*/
if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN &&
UE_GET_XFERTYPE(ed->bmAttributes) == UE_INTERRUPT &&
UGETW(ed->wMaxPacketSize) != 0x2) {
uca.bulkin = ed->bEndpointAddress;
} else if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_OUT &&
UE_GET_XFERTYPE(ed->bmAttributes) == UE_BULK) {
uca.bulkout = ed->bEndpointAddress;
} else if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN &&
UE_GET_XFERTYPE(ed->bmAttributes) == UE_INTERRUPT) {
sc->sc_intr_number = ed->bEndpointAddress;
sc->sc_isize = UGETW(ed->wMaxPacketSize);
}
}
if (uca.bulkin == -1) {
printf("%s: Could not find data bulk in\n",
sc->sc_dev.dv_xname);
usbd_deactivate(sc->sc_udev);
return;
}
if (uca.bulkout == -1) {
printf("%s: Could not find data bulk out\n",
sc->sc_dev.dv_xname);
usbd_deactivate(sc->sc_udev);
return;
}
if (sc->sc_intr_number== -1) {
printf("%s: Could not find interrupt in\n",
sc->sc_dev.dv_xname);
usbd_deactivate(sc->sc_udev);
return;
}
sc->sc_dtr = sc->sc_rts = 0;
uca.portno = UCOM_UNK_PORTNO;
/* bulkin, bulkout set above */
uca.ibufsize = UMCTIBUFSIZE;
if (sc->sc_product == USB_PRODUCT_MCT_SITECOM_USB232)
uca.obufsize = 16; /* device is broken */
else
uca.obufsize = UMCTOBUFSIZE;
uca.ibufsizepad = UMCTIBUFSIZE;
uca.opkthdrlen = 0;
uca.device = dev;
uca.iface = sc->sc_iface;
uca.methods = &umct_methods;
uca.arg = sc;
uca.info = NULL;
umct_init(sc);
DPRINTF(("umct: in=0x%x out=0x%x intr=0x%x\n",
uca.bulkin, uca.bulkout, sc->sc_intr_number ));
sc->sc_subdev = config_found_sm(self, &uca, ucomprint, ucomsubmatch);
}
void
umodem_attach(struct device *parent, struct device *self, void *aux)
{
struct umodem_softc *sc = (struct umodem_softc *)self;
struct usb_attach_arg *uaa = aux;
usbd_device_handle dev = uaa->device;
usb_interface_descriptor_t *id;
usb_endpoint_descriptor_t *ed;
usb_cdc_cm_descriptor_t *cmd;
usb_interface_descriptor_t *idesc;
const usb_cdc_acm_descriptor_t *acmd;
const usb_cdc_union_descriptor_t *uniond;
const usb_descriptor_t *desc;
usbd_desc_iter_t iter;
usbd_status err;
int current_iface_no = -1;
int i;
struct ucom_attach_args uca;
sc->sc_udev = dev;
sc->sc_ctl_iface = uaa->iface;
id = usbd_get_interface_descriptor(sc->sc_ctl_iface);
//printf("%s: iclass %d/%d\n", sc->sc_dev.dv_xname,
// id->bInterfaceClass, id->bInterfaceSubClass);
sc->sc_ctl_iface_no = id->bInterfaceNumber;
/* Get the data interface no. and capabilities */
sc->sc_cm_cap = 0;
sc->sc_data_iface_no = 0;
sc->sc_acm_cap = 0;
usb_desc_iter_init(dev, &iter);
desc = usb_desc_iter_next(&iter);
while (desc) {
if (desc->bDescriptorType == UDESC_INTERFACE) {
idesc = (usb_interface_descriptor_t *)desc;
current_iface_no = idesc->bInterfaceNumber;
}
if (current_iface_no == sc->sc_ctl_iface_no &&
desc->bDescriptorType == UDESC_CS_INTERFACE) {
switch(desc->bDescriptorSubtype) {
case UDESCSUB_CDC_CM:
cmd = (usb_cdc_cm_descriptor_t *)desc;
sc->sc_cm_cap = cmd->bmCapabilities;
sc->sc_data_iface_no = cmd->bDataInterface;
break;
case UDESCSUB_CDC_ACM:
acmd = (usb_cdc_acm_descriptor_t *)desc;
sc->sc_acm_cap = acmd->bmCapabilities;
break;
case UDESCSUB_CDC_UNION:
uniond = (usb_cdc_union_descriptor_t *)desc;
sc->sc_data_iface_no =
uniond->bSlaveInterface[0];
break;
}
}
desc = usb_desc_iter_next(&iter);
}
if (sc->sc_data_iface_no == 0) {
printf("%s: no pointer to data interface\n",
sc->sc_dev.dv_xname);
goto bad;
}
printf("%s: data interface %d, has %sCM over data, has %sbreak\n",
sc->sc_dev.dv_xname, sc->sc_data_iface_no,
sc->sc_cm_cap & USB_CDC_CM_OVER_DATA ? "" : "no ",
sc->sc_acm_cap & USB_CDC_ACM_HAS_BREAK ? "" : "no ");
/* Get the data interface too. */
for (i = 0; i < uaa->nifaces; i++) {
if (uaa->ifaces[i] != NULL) {
id = usbd_get_interface_descriptor(uaa->ifaces[i]);
if (id != NULL &&
id->bInterfaceNumber == sc->sc_data_iface_no) {
sc->sc_data_iface = uaa->ifaces[i];
uaa->ifaces[i] = NULL;
}
}
}
if (sc->sc_data_iface == NULL) {
printf("%s: no data interface\n", sc->sc_dev.dv_xname);
goto bad;
}
/*
* Find the bulk endpoints.
* Iterate over all endpoints in the data interface and take note.
*/
uca.bulkin = uca.bulkout = -1;
id = usbd_get_interface_descriptor(sc->sc_data_iface);
for (i = 0; i < id->bNumEndpoints; i++) {
ed = usbd_interface2endpoint_descriptor(sc->sc_data_iface, i);
if (ed == NULL) {
printf("%s: no endpoint descriptor for %d\n",
sc->sc_dev.dv_xname, i);
goto bad;
}
if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN &&
(ed->bmAttributes & UE_XFERTYPE) == UE_BULK) {
uca.bulkin = ed->bEndpointAddress;
} else if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_OUT &&
(ed->bmAttributes & UE_XFERTYPE) == UE_BULK) {
uca.bulkout = ed->bEndpointAddress;
}
}
if (uca.bulkin == -1) {
printf("%s: Could not find data bulk in\n",
sc->sc_dev.dv_xname);
goto bad;
}
if (uca.bulkout == -1) {
printf("%s: Could not find data bulk out\n",
sc->sc_dev.dv_xname);
goto bad;
}
if (usbd_get_quirks(sc->sc_udev)->uq_flags & UQ_ASSUME_CM_OVER_DATA) {
sc->sc_cm_over_data = 1;
} else {
if (sc->sc_cm_cap & USB_CDC_CM_OVER_DATA) {
if (sc->sc_acm_cap & USB_CDC_ACM_HAS_FEATURE)
err = umodem_set_comm_feature(sc,
UCDC_ABSTRACT_STATE, UCDC_DATA_MULTIPLEXED);
else
err = 0;
if (err) {
printf("%s: could not set data multiplex mode\n",
sc->sc_dev.dv_xname);
goto bad;
}
sc->sc_cm_over_data = 1;
}
}
/*
* The standard allows for notification messages (to indicate things
* like a modem hangup) to come in via an interrupt endpoint
* off of the control interface. Iterate over the endpoints on
* the control interface and see if there are any interrupt
* endpoints; if there are, then register it.
*/
sc->sc_ctl_notify = -1;
sc->sc_notify_pipe = NULL;
id = usbd_get_interface_descriptor(sc->sc_ctl_iface);
for (i = 0; i < id->bNumEndpoints; i++) {
ed = usbd_interface2endpoint_descriptor(sc->sc_ctl_iface, i);
if (ed == NULL)
continue;
if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN &&
(ed->bmAttributes & UE_XFERTYPE) == UE_INTERRUPT) {
printf("%s: status change notification available\n",
sc->sc_dev.dv_xname);
sc->sc_ctl_notify = ed->bEndpointAddress;
}
}
sc->sc_dtr = -1;
uca.portno = UCOM_UNK_PORTNO;
/* bulkin, bulkout set above */
uca.ibufsize = UMODEMIBUFSIZE;
uca.obufsize = UMODEMOBUFSIZE;
uca.ibufsizepad = UMODEMIBUFSIZE;
uca.opkthdrlen = 0;
uca.device = sc->sc_udev;
uca.iface = sc->sc_data_iface;
uca.methods = &umodem_methods;
uca.arg = sc;
uca.info = NULL;
usbd_add_drv_event(USB_EVENT_DRIVER_ATTACH, sc->sc_udev,
&sc->sc_dev);
DPRINTF(("umodem_attach: sc=%p\n", sc));
sc->sc_subdev = config_found_sm(self, &uca, ucomprint, ucomsubmatch);
return;
bad:
sc->sc_dying = 1;
}
static usbd_status
alloc_all_endpoints_genuine(struct umidi_softc *sc)
{
usb_interface_descriptor_t *interface_desc;
usb_config_descriptor_t *config_desc;
usb_descriptor_t *desc;
size_t remain, descsize;
struct umidi_endpoint *p, *q, *lowest, *endep, tmpep;
int epaddr, eppacketsize, num_ep;
interface_desc = usbd_get_interface_descriptor(sc->sc_iface);
num_ep = interface_desc->bNumEndpoints;
sc->sc_endpoints = p = mallocarray(num_ep,
sizeof(struct umidi_endpoint), M_USBDEV, M_WAITOK | M_CANFAIL);
if (!p)
return USBD_NOMEM;
sc->sc_out_num_endpoints = sc->sc_in_num_endpoints = 0;
epaddr = -1;
/* get the list of endpoints for midi stream */
config_desc = usbd_get_config_descriptor(sc->sc_udev);
desc = (usb_descriptor_t *) config_desc;
remain = (size_t)UGETW(config_desc->wTotalLength);
while (remain>=sizeof(usb_descriptor_t)) {
descsize = desc->bLength;
if (descsize>remain || descsize==0)
break;
if (desc->bDescriptorType==UDESC_ENDPOINT &&
remain>=USB_ENDPOINT_DESCRIPTOR_SIZE &&
UE_GET_XFERTYPE(TO_EPD(desc)->bmAttributes) == UE_BULK) {
epaddr = TO_EPD(desc)->bEndpointAddress;
eppacketsize = UGETW(TO_EPD(desc)->wMaxPacketSize);
} else if (desc->bDescriptorType==UDESC_CS_ENDPOINT &&
remain>=UMIDI_CS_ENDPOINT_DESCRIPTOR_SIZE &&
epaddr!=-1) {
if (num_ep>0) {
num_ep--;
p->sc = sc;
p->addr = epaddr;
p->packetsize = eppacketsize;
p->num_jacks = TO_CSEPD(desc)->bNumEmbMIDIJack;
if (UE_GET_DIR(epaddr)==UE_DIR_OUT) {
sc->sc_out_num_endpoints++;
sc->sc_out_num_jacks += p->num_jacks;
} else {
sc->sc_in_num_endpoints++;
sc->sc_in_num_jacks += p->num_jacks;
}
p++;
}
} else
epaddr = -1;
desc = NEXT_D(desc);
remain-=descsize;
}
/* sort endpoints */
num_ep = sc->sc_out_num_endpoints + sc->sc_in_num_endpoints;
p = sc->sc_endpoints;
endep = p + num_ep;
while (p<endep) {
lowest = p;
for (q=p+1; q<endep; q++) {
if ((UE_GET_DIR(lowest->addr)==UE_DIR_IN &&
UE_GET_DIR(q->addr)==UE_DIR_OUT) ||
((UE_GET_DIR(lowest->addr)==
UE_GET_DIR(q->addr)) &&
(UE_GET_ADDR(lowest->addr)>
UE_GET_ADDR(q->addr))))
lowest = q;
}
if (lowest != p) {
memcpy((void *)&tmpep, (void *)p, sizeof(tmpep));
memcpy((void *)p, (void *)lowest, sizeof(tmpep));
memcpy((void *)lowest, (void *)&tmpep, sizeof(tmpep));
}
p->num_open = 0;
p++;
}
sc->sc_out_ep = sc->sc_out_num_endpoints ? sc->sc_endpoints : NULL;
sc->sc_in_ep =
sc->sc_in_num_endpoints ?
sc->sc_endpoints+sc->sc_out_num_endpoints : NULL;
return USBD_NORMAL_COMPLETION;
}
void
ulpt_attach(struct device *parent, struct device *self, void *aux)
{
struct ulpt_softc *sc = (struct ulpt_softc *)self;
struct usb_attach_arg *uaa = aux;
struct usbd_device *dev = uaa->device;
struct usbd_interface *iface = uaa->iface;
usb_interface_descriptor_t *ifcd = usbd_get_interface_descriptor(iface);
usb_interface_descriptor_t *id, *iend;
usb_config_descriptor_t *cdesc;
usbd_status err;
usb_endpoint_descriptor_t *ed;
u_int8_t epcount;
int i, altno;
DPRINTFN(10,("ulpt_attach: sc=%p\n", sc));
//printf("%s: iclass %d/%d\n", sc->sc_dev.dv_xname,
// ifcd->bInterfaceClass, ifcd->bInterfaceSubClass);
/* XXX
* Stepping through the alternate settings needs to be abstracted out.
*/
cdesc = usbd_get_config_descriptor(dev);
if (cdesc == NULL) {
printf("%s: failed to get configuration descriptor\n",
sc->sc_dev.dv_xname);
return;
}
iend = (usb_interface_descriptor_t *)
((char *)cdesc + UGETW(cdesc->wTotalLength));
#ifdef DIAGNOSTIC
if (ifcd < (usb_interface_descriptor_t *)cdesc ||
ifcd >= iend)
panic("ulpt: iface desc out of range");
#endif
/* Step through all the descriptors looking for bidir mode */
for (id = ifcd, altno = 0;
id < iend;
id = (void *)((char *)id + id->bLength)) {
if (id->bDescriptorType == UDESC_INTERFACE &&
id->bInterfaceNumber == ifcd->bInterfaceNumber) {
if (id->bInterfaceClass == UICLASS_PRINTER &&
id->bInterfaceSubClass == UISUBCLASS_PRINTER &&
(id->bInterfaceProtocol == UIPROTO_PRINTER_BI /*||
id->bInterfaceProtocol == UIPROTO_PRINTER_1284*/))
goto found;
altno++;
}
}
id = ifcd; /* not found, use original */
found:
if (id != ifcd) {
/* Found a new bidir setting */
DPRINTF(("ulpt_attach: set altno = %d\n", altno));
err = usbd_set_interface(iface, altno);
if (err) {
printf("%s: setting alternate interface failed\n",
sc->sc_dev.dv_xname);
usbd_deactivate(sc->sc_udev);
return;
}
}
epcount = 0;
(void)usbd_endpoint_count(iface, &epcount);
sc->sc_in = -1;
sc->sc_out = -1;
for (i = 0; i < epcount; i++) {
ed = usbd_interface2endpoint_descriptor(iface, i);
if (ed == NULL) {
printf("%s: couldn't get ep %d\n",
sc->sc_dev.dv_xname, i);
return;
}
if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN &&
UE_GET_XFERTYPE(ed->bmAttributes) == UE_BULK) {
sc->sc_in = ed->bEndpointAddress;
} else if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_OUT &&
UE_GET_XFERTYPE(ed->bmAttributes) == UE_BULK) {
sc->sc_out = ed->bEndpointAddress;
}
}
if (sc->sc_out == -1) {
printf("%s: could not find bulk out endpoint\n",
sc->sc_dev.dv_xname);
usbd_deactivate(sc->sc_udev);
return;
}
if (usbd_get_quirks(dev)->uq_flags & UQ_BROKEN_BIDIR) {
/* This device doesn't handle reading properly. */
sc->sc_in = -1;
}
printf("%s: using %s-directional mode\n", sc->sc_dev.dv_xname,
sc->sc_in >= 0 ? "bi" : "uni");
DPRINTFN(10, ("ulpt_attach: bulk=%d\n", sc->sc_out));
sc->sc_iface = iface;
sc->sc_ifaceno = id->bInterfaceNumber;
sc->sc_udev = dev;
/* maybe the device needs firmware */
sc->sc_fwdev = ulpt_lookup(uaa->vendor, uaa->product);
if (sc->sc_fwdev) {
if (rootvp == NULL)
mountroothook_establish(ulpt_load_firmware, sc);
else
ulpt_load_firmware(sc);
}
#if 0
/*
* This code is disabled because for some mysterious reason it causes
* printing not to work. But only sometimes, and mostly with
* UHCI and less often with OHCI. *sigh*
*/
{
usb_config_descriptor_t *cd = usbd_get_config_descriptor(dev);
usb_device_request_t req;
int len, alen;
req.bmRequestType = UT_READ_CLASS_INTERFACE;
req.bRequest = UR_GET_DEVICE_ID;
USETW(req.wValue, cd->bConfigurationValue);
USETW2(req.wIndex, id->bInterfaceNumber, id->bAlternateSetting);
USETW(req.wLength, DEVINFOSIZE - 1);
err = usbd_do_request_flags(dev, &req, devinfop, USBD_SHORT_XFER_OK,
&alen, USBD_DEFAULT_TIMEOUT);
if (err) {
printf("%s: cannot get device id\n", sc->sc_dev.dv_xname);
} else if (alen <= 2) {
printf("%s: empty device id, no printer connected?\n",
sc->sc_dev.dv_xname);
} else {
/* devinfop now contains an IEEE-1284 device ID */
len = ((devinfop[0] & 0xff) << 8) | (devinfop[1] & 0xff);
if (len > DEVINFOSIZE - 3)
len = DEVINFOSIZE - 3;
devinfo[len] = 0;
printf("%s: device id <", sc->sc_dev.dv_xname);
ieee1284_print_id(devinfop+2);
printf(">\n");
}
}
#endif
}
/*
* Attach the interface. Allocate softc structures, do
* setup and ethernet/BPF attach.
*/
void
kue_attach(device_t parent, device_t self, void *aux)
{
struct kue_softc *sc = device_private(self);
struct usb_attach_arg *uaa = aux;
char *devinfop;
int s;
struct ifnet *ifp;
usbd_device_handle dev = uaa->device;
usbd_interface_handle iface;
usbd_status err;
usb_interface_descriptor_t *id;
usb_endpoint_descriptor_t *ed;
int i;
DPRINTFN(5,(" : kue_attach: sc=%p, dev=%p", sc, dev));
sc->kue_dev = self;
aprint_naive("\n");
aprint_normal("\n");
devinfop = usbd_devinfo_alloc(dev, 0);
aprint_normal_dev(self, "%s\n", devinfop);
usbd_devinfo_free(devinfop);
err = usbd_set_config_no(dev, KUE_CONFIG_NO, 1);
if (err) {
aprint_error_dev(self, "failed to set configuration"
", err=%s\n", usbd_errstr(err));
return;
}
sc->kue_udev = dev;
sc->kue_product = uaa->product;
sc->kue_vendor = uaa->vendor;
/* Load the firmware into the NIC. */
if (kue_load_fw(sc)) {
aprint_error_dev(self, "loading firmware failed\n");
return;
}
err = usbd_device2interface_handle(dev, KUE_IFACE_IDX, &iface);
if (err) {
aprint_error_dev(self, "getting interface handle failed\n");
return;
}
sc->kue_iface = iface;
id = usbd_get_interface_descriptor(iface);
/* Find endpoints. */
for (i = 0; i < id->bNumEndpoints; i++) {
ed = usbd_interface2endpoint_descriptor(iface, i);
if (ed == NULL) {
aprint_error_dev(self, "couldn't get ep %d\n", i);
return;
}
if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN &&
UE_GET_XFERTYPE(ed->bmAttributes) == UE_BULK) {
sc->kue_ed[KUE_ENDPT_RX] = ed->bEndpointAddress;
} else if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_OUT &&
UE_GET_XFERTYPE(ed->bmAttributes) == UE_BULK) {
sc->kue_ed[KUE_ENDPT_TX] = ed->bEndpointAddress;
} else if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN &&
UE_GET_XFERTYPE(ed->bmAttributes) == UE_INTERRUPT) {
sc->kue_ed[KUE_ENDPT_INTR] = ed->bEndpointAddress;
}
}
if (sc->kue_ed[KUE_ENDPT_RX] == 0 || sc->kue_ed[KUE_ENDPT_TX] == 0) {
aprint_error_dev(self, "missing endpoint\n");
return;
}
/* Read ethernet descriptor */
err = kue_ctl(sc, KUE_CTL_READ, KUE_CMD_GET_ETHER_DESCRIPTOR,
0, &sc->kue_desc, sizeof(sc->kue_desc));
if (err) {
aprint_error_dev(self, "could not read Ethernet descriptor\n");
return;
}
sc->kue_mcfilters = malloc(KUE_MCFILTCNT(sc) * ETHER_ADDR_LEN,
M_USBDEV, M_NOWAIT);
if (sc->kue_mcfilters == NULL) {
aprint_error_dev(self,
"no memory for multicast filter buffer\n");
return;
}
s = splnet();
/*
* A KLSI chip was detected. Inform the world.
*/
aprint_normal_dev(self, "Ethernet address %s\n",
ether_sprintf(sc->kue_desc.kue_macaddr));
/* Initialize interface info.*/
ifp = GET_IFP(sc);
ifp->if_softc = sc;
ifp->if_mtu = ETHERMTU;
ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST;
ifp->if_ioctl = kue_ioctl;
ifp->if_start = kue_start;
ifp->if_watchdog = kue_watchdog;
strncpy(ifp->if_xname, device_xname(sc->kue_dev), IFNAMSIZ);
IFQ_SET_READY(&ifp->if_snd);
/* Attach the interface. */
if_attach(ifp);
ether_ifattach(ifp, sc->kue_desc.kue_macaddr);
rnd_attach_source(&sc->rnd_source, device_xname(sc->kue_dev),
RND_TYPE_NET, 0);
sc->kue_attached = true;
splx(s);
usbd_add_drv_event(USB_EVENT_DRIVER_ATTACH, sc->kue_udev,
sc->kue_dev);
return;
}
void
uhidev_attach(struct device *parent, struct device *self, void *aux)
{
struct uhidev_softc *sc = (struct uhidev_softc *)self;
struct usb_attach_arg *uaa = aux;
usb_interface_descriptor_t *id;
usb_endpoint_descriptor_t *ed;
struct uhidev_attach_arg uha;
int size, nrepid, repid, repsz;
int i, repsizes[256];
void *desc = NULL;
struct device *dev;
sc->sc_udev = uaa->device;
sc->sc_iface = uaa->iface;
sc->sc_ifaceno = uaa->ifaceno;
id = usbd_get_interface_descriptor(sc->sc_iface);
usbd_set_idle(sc->sc_udev, sc->sc_ifaceno, 0, 0);
sc->sc_iep_addr = sc->sc_oep_addr = -1;
for (i = 0; i < id->bNumEndpoints; i++) {
ed = usbd_interface2endpoint_descriptor(sc->sc_iface, i);
if (ed == NULL) {
printf("%s: could not read endpoint descriptor\n",
DEVNAME(sc));
return;
}
DPRINTFN(10,("uhidev_attach: bLength=%d bDescriptorType=%d "
"bEndpointAddress=%d-%s bmAttributes=%d wMaxPacketSize=%d"
" bInterval=%d\n",
ed->bLength, ed->bDescriptorType,
ed->bEndpointAddress & UE_ADDR,
UE_GET_DIR(ed->bEndpointAddress)==UE_DIR_IN? "in" : "out",
ed->bmAttributes & UE_XFERTYPE,
UGETW(ed->wMaxPacketSize), ed->bInterval));
if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN &&
(ed->bmAttributes & UE_XFERTYPE) == UE_INTERRUPT) {
sc->sc_iep_addr = ed->bEndpointAddress;
} else if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_OUT &&
(ed->bmAttributes & UE_XFERTYPE) == UE_INTERRUPT) {
sc->sc_oep_addr = ed->bEndpointAddress;
} else {
printf("%s: unexpected endpoint\n", DEVNAME(sc));
return;
}
}
/*
* Check that we found an input interrupt endpoint.
* The output interrupt endpoint is optional
*/
if (sc->sc_iep_addr == -1) {
printf("%s: no input interrupt endpoint\n", DEVNAME(sc));
return;
}
#ifndef SMALL_KERNEL
if (uhidev_use_rdesc(sc, id, uaa->vendor, uaa->product, &desc, &size))
return;
#endif /* !SMALL_KERNEL */
if (desc == NULL) {
struct usb_hid_descriptor *hid;
hid = usbd_get_hid_descriptor(sc->sc_udev, id);
if (hid == NULL) {
printf("%s: no HID descriptor\n", DEVNAME(sc));
return;
}
size = UGETW(hid->descrs[0].wDescriptorLength);
desc = malloc(size, M_USBDEV, M_NOWAIT);
if (desc == NULL) {
printf("%s: no memory\n", DEVNAME(sc));
return;
}
if (usbd_get_report_descriptor(sc->sc_udev, sc->sc_ifaceno,
desc, size)) {
printf("%s: no report descriptor\n", DEVNAME(sc));
free(desc, M_USBDEV, 0);
return;
}
}
sc->sc_repdesc = desc;
sc->sc_repdesc_size = size;
nrepid = uhidev_maxrepid(desc, size);
if (nrepid < 0)
return;
printf("%s: iclass %d/%d", DEVNAME(sc), id->bInterfaceClass,
id->bInterfaceSubClass);
if (nrepid > 0)
printf(", %d report id%s", nrepid, nrepid > 1 ? "s" : "");
printf("\n");
nrepid++;
sc->sc_subdevs = mallocarray(nrepid, sizeof(struct uhidev *),
M_USBDEV, M_NOWAIT | M_ZERO);
if (sc->sc_subdevs == NULL) {
printf("%s: no memory\n", DEVNAME(sc));
return;
}
sc->sc_nrepid = nrepid;
sc->sc_isize = 0;
for (repid = 0; repid < nrepid; repid++) {
repsz = hid_report_size(desc, size, hid_input, repid);
DPRINTF(("uhidev_match: repid=%d, repsz=%d\n", repid, repsz));
repsizes[repid] = repsz;
if (repsz > sc->sc_isize)
sc->sc_isize = repsz;
}
sc->sc_isize += (nrepid != 1); /* one byte for the report ID */
DPRINTF(("uhidev_attach: isize=%d\n", sc->sc_isize));
uha.uaa = uaa;
uha.parent = sc;
uha.reportid = UHIDEV_CLAIM_ALLREPORTID;
/* Look for a driver claiming all report IDs first. */
dev = config_found_sm(self, &uha, NULL, uhidevsubmatch);
if (dev != NULL) {
for (repid = 0; repid < nrepid; repid++)
sc->sc_subdevs[repid] = (struct uhidev *)dev;
return;
}
for (repid = 0; repid < nrepid; repid++) {
DPRINTF(("%s: try repid=%d\n", __func__, repid));
if (hid_report_size(desc, size, hid_input, repid) == 0 &&
hid_report_size(desc, size, hid_output, repid) == 0 &&
hid_report_size(desc, size, hid_feature, repid) == 0)
continue;
uha.reportid = repid;
dev = config_found_sm(self, &uha, uhidevprint, uhidevsubmatch);
sc->sc_subdevs[repid] = (struct uhidev *)dev;
}
}
static int
ubt_attach(device_t dev)
{
struct usb_attach_arg *uaa = device_get_ivars(dev);
struct ubt_softc *sc = device_get_softc(dev);
struct usb_endpoint_descriptor *ed;
struct usb_interface_descriptor *id;
struct usb_interface *iface;
uint16_t wMaxPacketSize;
uint8_t alt_index, i, j;
uint8_t iface_index[2] = { 0, 1 };
device_set_usb_desc(dev);
sc->sc_dev = dev;
sc->sc_debug = NG_UBT_WARN_LEVEL;
/*
* Create Netgraph node
*/
if (ng_make_node_common(&typestruct, &sc->sc_node) != 0) {
UBT_ALERT(sc, "could not create Netgraph node\n");
return (ENXIO);
}
/* Name Netgraph node */
if (ng_name_node(sc->sc_node, device_get_nameunit(dev)) != 0) {
UBT_ALERT(sc, "could not name Netgraph node\n");
NG_NODE_UNREF(sc->sc_node);
return (ENXIO);
}
NG_NODE_SET_PRIVATE(sc->sc_node, sc);
NG_NODE_FORCE_WRITER(sc->sc_node);
/*
* Initialize device softc structure
*/
/* initialize locks */
lockinit(&sc->sc_ng_lock, "ubt ng", 0, 0);
lockinit(&sc->sc_if_lock, "ubt if", 0, LK_CANRECURSE);
/* initialize packet queues */
NG_BT_MBUFQ_INIT(&sc->sc_cmdq, UBT_DEFAULT_QLEN);
NG_BT_MBUFQ_INIT(&sc->sc_aclq, UBT_DEFAULT_QLEN);
NG_BT_MBUFQ_INIT(&sc->sc_scoq, UBT_DEFAULT_QLEN);
/* initialize glue task */
TASK_INIT(&sc->sc_task, 0, ubt_task, sc);
/*
* Configure Bluetooth USB device. Discover all required USB
* interfaces and endpoints.
*
* USB device must present two interfaces:
* 1) Interface 0 that has 3 endpoints
* 1) Interrupt endpoint to receive HCI events
* 2) Bulk IN endpoint to receive ACL data
* 3) Bulk OUT endpoint to send ACL data
*
* 2) Interface 1 then has 2 endpoints
* 1) Isochronous IN endpoint to receive SCO data
* 2) Isochronous OUT endpoint to send SCO data
*
* Interface 1 (with isochronous endpoints) has several alternate
* configurations with different packet size.
*/
/*
* For interface #1 search alternate settings, and find
* the descriptor with the largest wMaxPacketSize
*/
wMaxPacketSize = 0;
alt_index = 0;
i = 0;
j = 0;
ed = NULL;
/*
* Search through all the descriptors looking for the largest
* packet size:
*/
while ((ed = (struct usb_endpoint_descriptor *)usb_desc_foreach(
usbd_get_config_descriptor(uaa->device),
(struct usb_descriptor *)ed))) {
if ((ed->bDescriptorType == UDESC_INTERFACE) &&
(ed->bLength >= sizeof(*id))) {
id = (struct usb_interface_descriptor *)ed;
i = id->bInterfaceNumber;
j = id->bAlternateSetting;
}
if ((ed->bDescriptorType == UDESC_ENDPOINT) &&
(ed->bLength >= sizeof(*ed)) &&
(i == 1)) {
uint16_t temp;
temp = UGETW(ed->wMaxPacketSize);
if (temp > wMaxPacketSize) {
wMaxPacketSize = temp;
alt_index = j;
}
}
}
/* Set alt configuration on interface #1 only if we found it */
if (wMaxPacketSize > 0 &&
usbd_set_alt_interface_index(uaa->device, 1, alt_index)) {
UBT_ALERT(sc, "could not set alternate setting %d " \
"for interface 1!\n", alt_index);
goto detach;
}
/* Setup transfers for both interfaces */
if (usbd_transfer_setup(uaa->device, iface_index, sc->sc_xfer,
ubt_config, UBT_N_TRANSFER, sc, &sc->sc_if_lock)) {
UBT_ALERT(sc, "could not allocate transfers\n");
goto detach;
}
/* Claim all interfaces belonging to the Bluetooth part */
for (i = 1;; i++) {
iface = usbd_get_iface(uaa->device, i);
if (iface == NULL)
break;
id = usbd_get_interface_descriptor(iface);
if ((id != NULL) &&
(id->bInterfaceClass == UICLASS_WIRELESS) &&
(id->bInterfaceSubClass == UISUBCLASS_RF) &&
(id->bInterfaceProtocol == UIPROTO_BLUETOOTH)) {
usbd_set_parent_iface(uaa->device, i,
uaa->info.bIfaceIndex);
}
}
return (0); /* success */
detach:
ubt_detach(dev);
return (ENXIO);
} /* ubt_attach */
