/******************************************************************************
* FunctionName : user_init
* Description : entry of user application, init user function here
* Parameters : none
* Returns : none
*******************************************************************************/
void ICACHE_FLASH_ATTR
user_init(void)
{
os_printf("SDK version:%s\n", system_get_sdk_version());
#if ESP_PLATFORM
/*Initialization of the peripheral drivers*/
/*For light demo , it is user_light_init();*/
/* Also check whether assigned ip addr by the router.If so, connect to ESP-server */
user_esp_platform_init();
#endif
/*Establish a udp socket to receive local device detect info.*/
/*Listen to the port 1025, as well as udp broadcast.
/*If receive a string of device_find_request, it rely its IP address and MAC.*/
user_devicefind_init();
/*Establish a TCP server for http(with JSON) POST or GET command to communicate with the device.*/
/*You can find the command in "2B-SDK-Espressif IoT Demo.pdf" to see the details.*/
/*the JSON command for curl is like:*/
/*3 Channel mode: curl -X POST -H "Content-Type:application/json" -d "{\"period\":1000,\"rgb\":{\"red\":16000,\"green\":16000,\"blue\":16000}}" http://192.168.4.1/config?command=light */
/*5 Channel mode: curl -X POST -H "Content-Type:application/json" -d "{\"period\":1000,\"rgb\":{\"red\":16000,\"green\":16000,\"blue\":16000,\"cwhite\":3000,\"wwhite\",3000}}" http://192.168.4.1/config?command=light */
#ifdef SERVER_SSL_ENABLE
user_webserver_init(SERVER_SSL_PORT);
#else
user_webserver_init(SERVER_PORT);
#endif
}
/******************************************************************************
* FunctionName : user_init
* Description : entry of user application, init user function here
* Parameters : none
* Returns : none
*******************************************************************************/
void user_init(void)
{
os_printf("SDK version:%s\n", system_get_sdk_version());
#if ESP_PLATFORM
user_esp_platform_init();
#endif
user_devicefind_init();
#ifdef SERVER_SSL_ENABLE
user_webserver_init(SERVER_SSL_PORT);
#else
user_webserver_init(SERVER_PORT);
#endif
}
/******************************************************************************
* FunctionName : user_init
* Description : entry of user application, init user function here
* Parameters : none
* Returns : none
*******************************************************************************/
void user_init(void)
{
uart_init(BIT_RATE_115200, BIT_RATE_115200);
os_printf("SDK version:%d.%d.%d\r\n", SDK_VERSION_MAJOR, SDK_VERSION_MINOR, SDK_VERSION_REVISION);
#if ESP_PLATFORM
user_esp_platform_init();
#endif
user_devicefind_init();
#ifdef SERVER_SSL_ENABLE
user_webserver_init(SERVER_SSL_PORT);
#else
user_webserver_init(SERVER_PORT);
#endif
}
void ICACHE_FLASH_ATTR data_func() {
// Read out the sensor data structure from RTC memory
system_rtc_mem_read( SENSOR_DATA_MEM_ADDR, &sensor_data, sizeof(SENSOR_DATA_RTC_MEM) );
// When the system powers on for the first time, the data in the rtc memory is random.
struct esp_platform_saved_param esp_param_t;
user_esp_platform_load_param(&esp_param_t); // Stored in flash
// Load user params to check if the device was successfully registered to the server
// If it wasn't, it usually returns 255 (from the flash.)
if(sensor_data.init_flg!=INIT_MAGIC || sensor_data.cnt>SENSOR_DATA_NUM ) {
// This case runs when we first power on or when it time to flush the RTC memory of old data.
if(esp_param_t.activeflag!=1) { // If registered & activated
user_esp_platform_init(); // Router is not configured. Setup softAP. Wait for config.
#ifdef SERVER_SSL_ENABLE
user_webserver_init(SERVER_SSL_PORT);
#else
user_webserver_init(SERVER_PORT);
#endif
} else { // was connected! So we set init magic to exit the setup loop
sensor_data.init_flg = INIT_MAGIC;
sensor_data.cnt = 0;
system_rtc_mem_write(SENSOR_DATA_MEM_ADDR, &sensor_data, sizeof(SENSOR_DATA_RTC_MEM));
__SET__DEEP_SLEEP__WAKEUP_NO_RF__;
system_deep_sleep(100000);
}
} else { // This is where the measurements are made
uint16 vdd_val = 0;
if(sensor_data.cnt<0 || sensor_data.cnt>=SENSOR_DATA_NUM)
sensor_data.cnt=0; // range check and resets counter if needed
/* Reads power supply voltage, byte 107 of init_data.bin should be set to 0xFF.
* Replace with your own code.*/
sensor_data.data[sensor_data.cnt++] = (uint16)(phy_get_vdd33());
system_rtc_mem_write( SENSOR_DATA_MEM_ADDR, &sensor_data, sizeof(SENSOR_DATA_RTC_MEM) );
// Setup next sleep cycle
if(sensor_data.cnt==SENSOR_DATA_NUM-1) { __SET__DEEP_SLEEP__WAKEUP_NORMAL__; }
else { __SET__DEEP_SLEEP__WAKEUP_NO_RF__; }
// Uploads or go to sleep
if(sensor_data.cnt == SENSOR_DATA_NUM) { user_esp_platform_init(); }
else { system_deep_sleep(SENSOR_DEEP_SLEEP_TIME); }
}
}
/******************************************************************************
* FunctionName : user_init
* Description : entry of user application, init user function here
* Parameters : none
* Returns : none
*******************************************************************************/
void user_init(void)
{
#if ESP_PLATFORM
user_esp_platform_init();
#endif
user_devicefind_init();
user_webserver_init(SERVER_PORT);
}
/*The main working flow of this demo:
a. start mesh function, searching for existing mesh network
b. if there is no mesh network, search AP cache to connect to a recorded router.
c. If we still failed to establish a connection, start ESP-TOUCH wait for configure.
d. If ESP-TOUCH time out, re-search mesh network and AP CACHE.
e. During the whole procedure,we can control and configure the light via a restful webserver.
f. ESP-NOW is the recently released function to control the light without any WiFi connection.You can find it in app_switch
*/
void ICACHE_FLASH_ATTR
light_main_flow()
{
#if ESP_NOW_SUPPORT
/*We have added esp-now feature in the light project */
/*So that the lights in a certain MAC group can be easily controlled by an ESP-NOW controller*/
/*The sample code is in APP_CONTROLLER/APP_SWITCH*/
sp_MacInit();//csc add button Mac add and delet
light_EspnowInit();
#endif
#if 1
#if ESP_PLATFORM
/*Initialization of the peripheral drivers*/
/*For light demo , it is user_light_init();*/
/* Also check whether assigned ip addr by the router.If so, connect to ESP-server */
user_esp_platform_init_peripheral();
disp_heap(5);
#endif
/*Establish a udp socket to receive local device detect info.*/
/*Listen to the port 1025, as well as udp broadcast.
/*If receive a string of device_find_request, it reply its IP address and MAC.*/
user_devicefind_init();
disp_heap(6);
/*Establish a TCP server for http(with JSON) POST or GET command to communicate with the device.*/
/*You can find the command in "2B-SDK-Espressif IoT Demo.pdf" to see the details.*/
/*the JSON command for curl is like:*/
/*3 Channel mode: curl -X POST -H "Content-Type:application/json" -d "{\"period\":1000,\"rgb\":{\"red\":16000,\"green\":16000,\"blue\":16000}}" http://192.168.4.1/config?command=light */
/*5 Channel mode: curl -X POST -H "Content-Type:application/json" -d "{\"period\":1000,\"rgb\":{\"red\":16000,\"green\":16000,\"blue\":16000,\"cwhite\":3000,\"wwhite\",3000}}" http://192.168.4.1/config?command=light */
/***********NOTE!!**************/
/*in MESH mode, you need to add "sip","sport" and "mdev_mac" fields to send command to the desired device*/
/*see details in MESH documentation*/
/*MESH INTERFACE IS AT PORT 8000*/
#if ESP_WEB_SUPPORT
//Initialize DNS server for captive portal
//captdnsInit();
//Initialize espfs containing static webpages
espFsInit((void*)(webpages_espfs_start));
//Initialize webserver
httpdInit(builtInUrls, SERVER_PORT);
//user_webserver_init(SERVER_PORT);
#else
#ifdef SERVER_SSL_ENABLE
user_webserver_init(SERVER_SSL_PORT);
#else
user_webserver_init(SERVER_PORT);
#endif
#endif
#endif
////simplepair_test();//debug only
//In debug mode, if you restart the light within 2 seconds, it will get into softap mode and wait for local upgrading firmware.
//Restart again, it will clear the system param and set to default status.
#if ESP_DEBUG_MODE
extern struct esp_platform_saved_param esp_param;
if(esp_param.reset_flg == MODE_APMODE){
os_printf("==================\r\n");
os_printf("RESET FLG==2,STATIONAP_MODE \r\n");
os_printf("==================\r\n");
#if ESP_MESH_SUPPORT
user_DeviceFindRespSet(false);
#endif
struct softap_config config_softap;
char ssid[33]={0};
wifi_softap_get_config(&config_softap);
os_memset(config_softap.password, 0, sizeof(config_softap.password));
os_memset(config_softap.ssid, 0, sizeof(config_softap.ssid));
os_sprintf(ssid,"ESP_%06X",system_get_chip_id());
os_memcpy(config_softap.ssid, ssid, os_strlen(ssid));
config_softap.ssid_len = os_strlen(ssid);
config_softap.authmode = AUTH_OPEN;
wifi_softap_set_config(&config_softap);
os_printf("SET STATION-AP MODE\r\n");
//wifi_set_opmode(STATIONAP_MODE);
wifi_set_opmode(STATIONAP_MODE);
user_esp_platform_set_reset_flg(MODE_RESET);
os_timer_disarm(&reset_flg_t);
os_timer_setfn(&reset_flg_t,user_esp_platform_set_reset_flg,MODE_NORMAL);
os_timer_arm(&reset_flg_t,2000,0);
user_light_set_duty(0, LIGHT_RED);
user_light_set_duty(0, LIGHT_GREEN);
user_light_set_duty(0, LIGHT_BLUE);
user_light_set_duty(22222, LIGHT_WARM_WHITE);
user_light_set_duty(22222, LIGHT_COLD_WHITE);
os_delay_us(5000);
light_ShowDevLevel(5);
return;
}
#if ESP_RESET_DEBUG_EN
else if(esp_param.reset_flg == MODE_RESET){
os_printf("==================\r\n");
os_printf("RESET FLG==1,RESET IN 200 MS \r\n");
os_printf("==================\r\n");
user_esp_platform_set_reset_flg(MODE_APMODE);
os_timer_disarm(&reset_flg_t);
os_timer_setfn(&reset_flg_t,user_esp_platform_reset_default,0);
os_timer_arm(&reset_flg_t,200,0);
}
else{
os_printf("==================\r\n");
os_printf("RESET FLG==0,NORMAL MODE \r\n");
os_printf("==================\r\n");
user_esp_platform_set_reset_flg(MODE_APMODE);
os_timer_disarm(&reset_flg_t);
os_timer_setfn(&reset_flg_t,user_esp_platform_set_reset_flg,0);
os_timer_arm(&reset_flg_t,2000,0);
}
#endif
#endif
#if ESP_MESH_SUPPORT
/*initialize mesh network.
1. search for existing mesh.
2. if failed , try connecting recorded router.
*/
//user_MeshSetInfo();
user_MeshInit();
#elif ESP_TOUCH_SUPPORT
esptouch_FlowStart();
#endif
}