Example #1
0
/*
 * Get time to complete an unit work on a particular cpu.
 * The minimum number in CALIBRATE_RUNS runs is returned.
 */
static double calibrate_unit(unsigned char *data)
{
	unsigned long t, i, j, k;
	struct timeval tps;
	double tunit = 0.0;

	for (i = 0; i < CALIBRATE_RUNS; i++) {

		fio_gettime(&tps, NULL);
		/* scale for less variance */
		for (j = 0; j < CALIBRATE_SCALE; j++) {
			/* unit of work */
			for (k=0; k < page_size; k++) {
				data[(k + j) % page_size] = k % 256;
				/*
				 * we won't see STOP here. this is to match
				 * the same statement in the profiling loop.
				 */
				if (ipc.status == IDLE_PROF_STATUS_PROF_STOP)
					return 0.0;
			}
		}

		t = utime_since_now(&tps);
		if (!t)
			continue;

		/* get the minimum time to complete CALIBRATE_SCALE units */
		if ((i == 0) || ((double)t < tunit))
			tunit = (double)t;
	}

	return tunit / CALIBRATE_SCALE;
}
Example #2
0
void fio_time_init(void)
{
	int i;

	fio_clock_init();

	/*
	 * Check the granularity of the nanosleep function
	 */
	for (i = 0; i < 10; i++) {
		struct timeval tv;
		struct timespec ts;
		unsigned long elapsed;

		fio_gettime(&tv, NULL);
		ts.tv_sec = 0;
		ts.tv_nsec = 1000;

		nanosleep(&ts, NULL);
		elapsed = utime_since_now(&tv);

		if (elapsed > ns_granularity)
			ns_granularity = elapsed;
	}
}
Example #3
0
void usec_sleep(struct thread_data *td, unsigned long usec)
{
	struct timespec req;
	struct timeval tv;

	do {
		unsigned long ts = usec;

		if (usec < ns_granularity) {
			usec_spin(usec);
			break;
		}

		ts = usec - ns_granularity;

		if (ts >= 1000000) {
			req.tv_sec = ts / 1000000;
			ts -= 1000000 * req.tv_sec;
		} else
			req.tv_sec = 0;

		req.tv_nsec = ts * 1000;
		fio_gettime(&tv, NULL);

		if (nanosleep(&req, NULL) < 0)
			break;

		ts = utime_since_now(&tv);
		if (ts >= usec)
			break;

		usec -= ts;
	} while (!td->terminate);
}
static void iolog_delay(struct thread_data *td, unsigned long delay)
{
	unsigned long usec = utime_since_now(&td->last_issue);
	unsigned long this_delay;

	if (delay < usec)
		return;

	delay -= usec;

	/*
	 * less than 100 usec delay, just regard it as noise
	 */
	if (delay < 100)
		return;

	while (delay && !td->terminate) {
		this_delay = delay;
		if (this_delay > 500000)
			this_delay = 500000;

		usec_sleep(td, this_delay);
		delay -= this_delay;
	}
}
Example #5
0
/*
 * busy looping version for the last few usec
 */
void usec_spin(unsigned int usec)
{
	struct timeval start;

	fio_gettime(&start, NULL);
	while (utime_since_now(&start) < usec)
		nop;
}
Example #6
0
/*
 * busy looping version for the last few usec
 */
uint64_t usec_spin(unsigned int usec)
{
	struct timeval start;
	uint64_t t;

	fio_gettime(&start, NULL);
	while ((t = utime_since_now(&start)) < usec)
		nop;

	return t;
}
Example #7
0
File: io_u.c Project: vsharma13/fio
static enum fio_ddir rate_ddir(struct thread_data *td, enum fio_ddir ddir)
{
	enum fio_ddir odir = ddir ^ 1;
	struct timeval t;
	long usec;

	assert(ddir_rw(ddir));

	if (td->rate_pending_usleep[ddir] <= 0)
		return ddir;

	/*
	 * We have too much pending sleep in this direction. See if we
	 * should switch.
	 */
	if (td_rw(td) && td->o.rwmix[odir]) {
		/*
		 * Other direction does not have too much pending, switch
		 */
		if (td->rate_pending_usleep[odir] < 100000)
			return odir;

		/*
		 * Both directions have pending sleep. Sleep the minimum time
		 * and deduct from both.
		 */
		if (td->rate_pending_usleep[ddir] <=
			td->rate_pending_usleep[odir]) {
			usec = td->rate_pending_usleep[ddir];
		} else {
			usec = td->rate_pending_usleep[odir];
			ddir = odir;
		}
	} else
		usec = td->rate_pending_usleep[ddir];

	io_u_quiesce(td);

	fio_gettime(&t, NULL);
	usec_sleep(td, usec);
	usec = utime_since_now(&t);

	td->rate_pending_usleep[ddir] -= usec;

	odir = ddir ^ 1;
	if (td_rw(td) && __should_check_rate(td, odir))
		td->rate_pending_usleep[odir] -= usec;

	if (ddir_trim(ddir))
		return ddir;

	return ddir;
}
Example #8
0
File: log.c Project: jeefke/fio
static void iolog_delay(struct thread_data *td, unsigned long delay)
{
	unsigned long usec = utime_since_now(&td->last_issue);

	if (delay < usec)
		return;

	delay -= usec;

	/*
	 * less than 100 usec delay, just regard it as noise
	 */
	if (delay < 100)
		return;

	usec_sleep(td, delay);
}
Example #9
0
File: test.c Project: joahsun/fio
static uint64_t t_crc32(void)
{
	struct timeval s;
	uint64_t ret;
	void *buf;
	int i;

	buf = malloc(CHUNK);
	randomize_buf(buf, CHUNK, 0x8989);

	fio_gettime(&s, NULL);
	for (i = 0; i < NR_CHUNKS; i++)
		fio_crc32(buf, CHUNK);

	ret = utime_since_now(&s);
	free(buf);
	return ret;
}
Example #10
0
File: io_u.c Project: vsharma13/fio
/*
 * Check if we can bump the queue depth
 */
void lat_target_check(struct thread_data *td)
{
	uint64_t usec_window;
	uint64_t ios;
	double success_ios;

	usec_window = utime_since_now(&td->latency_ts);
	if (usec_window < td->o.latency_window)
		return;

	ios = ddir_rw_sum(td->io_blocks) - td->latency_ios;
	success_ios = (double) (ios - td->latency_failed) / (double) ios;
	success_ios *= 100.0;

	dprint(FD_RATE, "Success rate: %.2f%% (target %.2f%%)\n", success_ios, td->o.latency_percentile.u.f);

	if (success_ios >= td->o.latency_percentile.u.f)
		lat_target_success(td);
	else
		__lat_target_failed(td);
}
Example #11
0
File: test.c Project: joahsun/fio
static uint64_t t_xxhash(void)
{
	void *state;
	struct timeval s;
	uint64_t ret;
	void *buf;
	int i;

	state = XXH32_init(0x8989);

	buf = malloc(CHUNK);
	randomize_buf(buf, CHUNK, 0x8989);

	fio_gettime(&s, NULL);
	for (i = 0; i < NR_CHUNKS; i++)
		XXH32_update(state, buf, CHUNK);

	XXH32_digest(state);
	ret = utime_since_now(&s);
	free(buf);
	return ret;
}
Example #12
0
File: test.c Project: joahsun/fio
static uint64_t t_md5(void)
{
	uint32_t digest[4];
	struct fio_md5_ctx ctx = { .hash = digest };
	struct timeval s;
	uint64_t ret;
	void *buf;
	int i;

	fio_md5_init(&ctx);

	buf = malloc(CHUNK);
	randomize_buf(buf, CHUNK, 0x8989);

	fio_gettime(&s, NULL);
	for (i = 0; i < NR_CHUNKS; i++)
		fio_md5_update(&ctx, buf, CHUNK);

	ret = utime_since_now(&s);
	free(buf);
	return ret;
}
Example #13
0
File: test.c Project: joahsun/fio
static uint64_t t_sha512(void)
{
	uint8_t sha[128];
	struct fio_sha512_ctx ctx = { .buf = sha };
	struct timeval s;
	uint64_t ret;
	void *buf;
	int i;

	fio_sha512_init(&ctx);

	buf = malloc(CHUNK);
	randomize_buf(buf, CHUNK, 0x8989);

	fio_gettime(&s, NULL);
	for (i = 0; i < NR_CHUNKS; i++)
		fio_sha512_update(&ctx, buf, CHUNK);

	ret = utime_since_now(&s);
	free(buf);
	return ret;
}
Example #14
0
void rate_throttle(struct thread_data *td, unsigned long time_spent,
		   unsigned int bytes)
{
	unsigned long usec_cycle;
	unsigned int bs;

	if (!td->o.rate && !td->o.rate_iops)
		return;

	if (td_rw(td))
		bs = td->o.rw_min_bs;
	else if (td_read(td))
		bs = td->o.min_bs[DDIR_READ];
	else
		bs = td->o.min_bs[DDIR_WRITE];

	usec_cycle = td->rate_usec_cycle * (bytes / bs);

	if (time_spent < usec_cycle) {
		unsigned long s = usec_cycle - time_spent;

		td->rate_pending_usleep += s;

		if (td->rate_pending_usleep >= 100000) {
			struct timeval t;

			fio_gettime(&t, NULL);
			usec_sleep(td, td->rate_pending_usleep);
			td->rate_pending_usleep -= utime_since_now(&t);
		}
	} else {
		long overtime = time_spent - usec_cycle;

		td->rate_pending_usleep -= overtime;
	}
}
Example #15
0
uint64_t utime_since_genesis(void)
{
	return utime_since_now(&genesis);
}
Example #16
0
File: io_u.c Project: vsharma13/fio
static void io_completed(struct thread_data *td, struct io_u *io_u,
			 struct io_completion_data *icd)
{
	struct fio_file *f;

	dprint_io_u(io_u, "io complete");

	td_io_u_lock(td);
	assert(io_u->flags & IO_U_F_FLIGHT);
	io_u->flags &= ~(IO_U_F_FLIGHT | IO_U_F_BUSY_OK);

	/*
	 * Mark IO ok to verify
	 */
	if (io_u->ipo) {
		io_u->ipo->flags &= ~IP_F_IN_FLIGHT;
		write_barrier();
	}

	td_io_u_unlock(td);

	if (ddir_sync(io_u->ddir)) {
		td->last_was_sync = 1;
		f = io_u->file;
		if (f) {
			f->first_write = -1ULL;
			f->last_write = -1ULL;
		}
		return;
	}

	td->last_was_sync = 0;
	td->last_ddir = io_u->ddir;

	if (!io_u->error && ddir_rw(io_u->ddir)) {
		unsigned int bytes = io_u->buflen - io_u->resid;
		const enum fio_ddir idx = io_u->ddir;
		const enum fio_ddir odx = io_u->ddir ^ 1;
		int ret;

		td->io_blocks[idx]++;
		td->this_io_blocks[idx]++;
		td->io_bytes[idx] += bytes;

		if (!(io_u->flags & IO_U_F_VER_LIST))
			td->this_io_bytes[idx] += bytes;

		if (idx == DDIR_WRITE) {
			f = io_u->file;
			if (f) {
				if (f->first_write == -1ULL ||
				    io_u->offset < f->first_write)
					f->first_write = io_u->offset;
				if (f->last_write == -1ULL ||
				    ((io_u->offset + bytes) > f->last_write))
					f->last_write = io_u->offset + bytes;
			}
		}

		if (ramp_time_over(td) && (td->runstate == TD_RUNNING ||
					   td->runstate == TD_VERIFYING)) {
			account_io_completion(td, io_u, icd, idx, bytes);

			if (__should_check_rate(td, idx)) {
				td->rate_pending_usleep[idx] =
					(usec_for_io(td, idx) -
					 utime_since_now(&td->start));
			}
			if (idx != DDIR_TRIM && __should_check_rate(td, odx))
				td->rate_pending_usleep[odx] =
					(usec_for_io(td, odx) -
					 utime_since_now(&td->start));
		}

		icd->bytes_done[idx] += bytes;

		if (io_u->end_io) {
			ret = io_u->end_io(td, io_u);
			if (ret && !icd->error)
				icd->error = ret;
		}
	} else if (io_u->error) {
		icd->error = io_u->error;
		io_u_log_error(td, io_u);
	}
	if (icd->error) {
		enum error_type_bit eb = td_error_type(io_u->ddir, icd->error);
		if (!td_non_fatal_error(td, eb, icd->error))
			return;
		/*
		 * If there is a non_fatal error, then add to the error count
		 * and clear all the errors.
		 */
		update_error_count(td, icd->error);
		td_clear_error(td);
		icd->error = 0;
		io_u->error = 0;
	}
}
Example #17
0
File: io_u.c Project: hanhua/fio
static void io_completed(struct thread_data *td, struct io_u *io_u,
			 struct io_completion_data *icd)
{
	struct fio_file *f;

	dprint_io_u(io_u, "io complete");

	td_io_u_lock(td);
	assert(io_u->flags & IO_U_F_FLIGHT);
	io_u->flags &= ~(IO_U_F_FLIGHT | IO_U_F_BUSY_OK);
	td_io_u_unlock(td);

	if (ddir_sync(io_u->ddir)) {
		td->last_was_sync = 1;
		f = io_u->file;
		if (f) {
			f->first_write = -1ULL;
			f->last_write = -1ULL;
		}
		return;
	}

	td->last_was_sync = 0;
	td->last_ddir = io_u->ddir;

	if (!io_u->error && ddir_rw(io_u->ddir)) {
		unsigned int bytes = io_u->buflen - io_u->resid;
		const enum fio_ddir idx = io_u->ddir;
		const enum fio_ddir odx = io_u->ddir ^ 1;
		int ret;

		td->io_blocks[idx]++;
		td->this_io_blocks[idx]++;
		td->io_bytes[idx] += bytes;

		if (!(io_u->flags & IO_U_F_VER_LIST))
			td->this_io_bytes[idx] += bytes;

		if (idx == DDIR_WRITE) {
			f = io_u->file;
			if (f) {
				if (f->first_write == -1ULL ||
				    io_u->offset < f->first_write)
					f->first_write = io_u->offset;
				if (f->last_write == -1ULL ||
				    ((io_u->offset + bytes) > f->last_write))
					f->last_write = io_u->offset + bytes;
			}
		}

		if (ramp_time_over(td) && (td->runstate == TD_RUNNING ||
					   td->runstate == TD_VERIFYING)) {
			account_io_completion(td, io_u, icd, idx, bytes);

			if (__should_check_rate(td, idx)) {
				td->rate_pending_usleep[idx] =
					(usec_for_io(td, idx) -
					 utime_since_now(&td->start));
			}

			if (__should_check_latency(td, idx)) {
				unsigned long lusec = utime_since(
					&io_u->issue_time, &icd->time);
				/* Linear increase and logarithmic decrease */
				if (lusec > td->o.shed_latency[idx]) {
					if (td->shed_count[idx] < MAX_SHED_COUNT ) {
						td->shed_count[idx] += (1<<SHED_FRAC_BITS);
					}
				}
				else if (td->shed_count[idx]) {
					td->shed_count[idx] -= get_used_bits(td->shed_count[idx]);
				}
				if (td->shed_count[idx]) {
					lusec = (lusec * td->shed_count[idx]) >> SHED_FRAC_BITS;
					if (lusec > td->rate_pending_usleep[idx]) {
						td->rate_pending_usleep[idx] = lusec;
					}
				}
			}
Example #18
0
static enum fio_ddir rate_ddir(struct thread_data *td, enum fio_ddir ddir)
{
	enum fio_ddir odir = ddir ^ 1;
	struct timeval t;
	long usec;

	assert(ddir_rw(ddir));

	if (td->rate_pending_usleep[ddir] <= 0)
		return ddir;

	/*
	 * We have too much pending sleep in this direction. See if we
	 * should switch.
	 */
	if (td_rw(td)) {
		/*
		 * Other direction does not have too much pending, switch
		 */
		if (td->rate_pending_usleep[odir] < 100000)
			return odir;

		/*
		 * Both directions have pending sleep. Sleep the minimum time
		 * and deduct from both.
		 */
		if (td->rate_pending_usleep[ddir] <=
			td->rate_pending_usleep[odir]) {
			usec = td->rate_pending_usleep[ddir];
		} else {
			usec = td->rate_pending_usleep[odir];
			ddir = odir;
		}
	} else
		usec = td->rate_pending_usleep[ddir];

	/*
	 * We are going to sleep, ensure that we flush anything pending as
	 * not to skew our latency numbers.
	 *
	 * Changed to only monitor 'in flight' requests here instead of the
	 * td->cur_depth, b/c td->cur_depth does not accurately represent
	 * io's that have been actually submitted to an async engine,
	 * and cur_depth is meaningless for sync engines.
	 */
	if (td->io_u_in_flight) {
		int fio_unused ret;

		ret = io_u_queued_complete(td, td->io_u_in_flight, NULL);
	}

	fio_gettime(&t, NULL);
	usec_sleep(td, usec);
	usec = utime_since_now(&t);

	td->rate_pending_usleep[ddir] -= usec;

	odir = ddir ^ 1;
	if (td_rw(td) && __should_check_rate(td, odir))
		td->rate_pending_usleep[odir] -= usec;

	if (ddir_trim(ddir))
		return ddir;
	return ddir;
}