Example #1
0
/*
 * netvsc_device_remove - Callback when the root bus device is removed
 */
int netvsc_device_remove(struct hv_device *device)
{
	struct netvsc_device *net_device;
	unsigned long flags;

	net_device = hv_get_drvdata(device);

	netvsc_disconnect_vsp(net_device);

	/*
	 * Since we have already drained, we don't need to busy wait
	 * as was done in final_release_stor_device()
	 * Note that we cannot set the ext pointer to NULL until
	 * we have drained - to drain the outgoing packets, we need to
	 * allow incoming packets.
	 */

	spin_lock_irqsave(&device->channel->inbound_lock, flags);
	hv_set_drvdata(device, NULL);
	spin_unlock_irqrestore(&device->channel->inbound_lock, flags);

	/*
	 * At this point, no one should be accessing net_device
	 * except in here
	 */
	dev_notice(&device->device, "net device safe to remove\n");

	/* Now, we can close the channel safely */
	vmbus_close(device->channel);

	/* Release all resources */
	vfree(net_device->sub_cb_buf);
	free_netvsc_device(net_device);
	return 0;
}
Example #2
0
/* Callback from VMBUS subsystem when new channel created. */
static void
hv_uio_new_channel(struct vmbus_channel *new_sc)
{
	struct hv_device *hv_dev = new_sc->primary_channel->device_obj;
	struct device *device = &hv_dev->device;
	const size_t ring_bytes = HV_RING_SIZE * PAGE_SIZE;
	int ret;

	/* Create host communication ring */
	ret = vmbus_open(new_sc, ring_bytes, ring_bytes, NULL, 0,
			 hv_uio_channel_cb, new_sc);
	if (ret) {
		dev_err(device, "vmbus_open subchannel failed: %d\n", ret);
		return;
	}

	/* Disable interrupts on sub channel */
	new_sc->inbound.ring_buffer->interrupt_mask = 1;
	set_channel_read_mode(new_sc, HV_CALL_ISR);

	ret = sysfs_create_bin_file(&new_sc->kobj, &ring_buffer_bin_attr);
	if (ret) {
		dev_err(device, "sysfs create ring bin file failed; %d\n", ret);
		vmbus_close(new_sc);
	}
}
Example #3
0
int storvsc_dev_remove(struct hv_device *device)
{
	struct storvsc_device *stor_device;

	DPRINT_INFO(STORVSC, "disabling storage device (%p)...",
		    device->ext);

	stor_device = release_stor_device(device);

	/*
	 * At this point, all outbound traffic should be disable. We
	 * only allow inbound traffic (responses) to proceed so that
	 * outstanding requests can be completed.
	 */

	storvsc_wait_to_drain(stor_device);

	stor_device = final_release_stor_device(device);

	/* Close the channel */
	vmbus_close(device->channel);

	free_stor_device(stor_device);
	return 0;
}
Example #4
0
static int hv_kbd_probe(struct hv_device *hv_dev,
			const struct hv_vmbus_device_id *dev_id)
{
	struct hv_kbd_dev *kbd_dev;
	struct serio *hv_serio;
	int error;

	kbd_dev = kzalloc(sizeof(struct hv_kbd_dev), GFP_KERNEL);
	hv_serio = kzalloc(sizeof(struct serio), GFP_KERNEL);
	if (!kbd_dev || !hv_serio) {
		error = -ENOMEM;
		goto err_free_mem;
	}

	kbd_dev->hv_dev = hv_dev;
	kbd_dev->hv_serio = hv_serio;
	spin_lock_init(&kbd_dev->lock);
	init_completion(&kbd_dev->wait_event);
	hv_set_drvdata(hv_dev, kbd_dev);

	hv_serio->dev.parent  = &hv_dev->device;
	hv_serio->id.type = SERIO_8042_XL;
	hv_serio->port_data = kbd_dev;
	strlcpy(hv_serio->name, dev_name(&hv_dev->device),
		sizeof(hv_serio->name));
	strlcpy(hv_serio->phys, dev_name(&hv_dev->device),
		sizeof(hv_serio->phys));

	hv_serio->start = hv_kbd_start;
	hv_serio->stop = hv_kbd_stop;

	error = vmbus_open(hv_dev->channel,
			   KBD_VSC_SEND_RING_BUFFER_SIZE,
			   KBD_VSC_RECV_RING_BUFFER_SIZE,
			   NULL, 0,
			   hv_kbd_on_channel_callback,
			   hv_dev);
	if (error)
		goto err_free_mem;

	error = hv_kbd_connect_to_vsp(hv_dev);
	if (error)
		goto err_close_vmbus;

	serio_register_port(kbd_dev->hv_serio);

	device_init_wakeup(&hv_dev->device, true);

	return 0;

err_close_vmbus:
	vmbus_close(hv_dev->channel);
err_free_mem:
	kfree(hv_serio);
	kfree(kbd_dev);
	return error;
}
static int mousevsc_remove(struct hv_device *dev)
{
	struct mousevsc_dev *input_dev = hv_get_drvdata(dev);

	vmbus_close(dev->channel);
	hid_hw_stop(input_dev->hid_device);
	hid_destroy_device(input_dev->hid_device);
	mousevsc_free_device(input_dev);

	return 0;
}
Example #6
0
static int hv_kbd_remove(struct hv_device *hv_dev)
{
	struct hv_kbd_dev *kbd_dev = hv_get_drvdata(hv_dev);

	serio_unregister_port(kbd_dev->hv_serio);
	vmbus_close(hv_dev->channel);
	kfree(kbd_dev);

	hv_set_drvdata(hv_dev, NULL);

	return 0;
}
Example #7
0
static int
hv_uio_remove(struct hv_device *dev)
{
	struct hv_uio_private_data *pdata = hv_get_drvdata(dev);

	if (!pdata)
		return 0;

	uio_unregister_device(&pdata->info);
	hv_uio_cleanup(dev, pdata);
	hv_set_drvdata(dev, NULL);
	vmbus_close(dev->channel);
	kfree(pdata);
	return 0;
}
Example #8
0
/* Connect to VSP (Virtual Service Provider) on host */
static int synthvid_connect_vsp(struct hv_device *hdev)
{
	struct fb_info *info = hv_get_drvdata(hdev);
	struct hvfb_par *par = info->par;
	int ret;

	ret = vmbus_open(hdev->channel, RING_BUFSIZE, RING_BUFSIZE,
			 NULL, 0, synthvid_receive, hdev);
	if (ret) {
		pr_err("Unable to open vmbus channel\n");
		return ret;
	}

	/* Negotiate the protocol version with host */
	if (vmbus_proto_version == VERSION_WS2008 ||
	    vmbus_proto_version == VERSION_WIN7)
		ret = synthvid_negotiate_ver(hdev, SYNTHVID_VERSION_WIN7);
	else
		ret = synthvid_negotiate_ver(hdev, SYNTHVID_VERSION_WIN8);

	if (ret) {
		pr_err("Synthetic video device version not accepted\n");
		goto error;
	}

	if (par->synthvid_version == SYNTHVID_VERSION_WIN7)
		screen_depth = SYNTHVID_DEPTH_WIN7;
	else
		screen_depth = SYNTHVID_DEPTH_WIN8;

	screen_fb_size = hdev->channel->offermsg.offer.
				mmio_megabytes * 1024 * 1024;

	return 0;

error:
	vmbus_close(hdev->channel);
	return ret;
}
Example #9
0
/*
 * netvsc_device_remove - Callback when the root bus device is removed
 */
int netvsc_device_remove(struct hv_device *device)
{
	struct net_device *ndev = hv_get_drvdata(device);
	struct net_device_context *net_device_ctx = netdev_priv(ndev);
	struct netvsc_device *net_device = net_device_ctx->nvdev;

	netvsc_disconnect_vsp(device);

	net_device_ctx->nvdev = NULL;

	/*
	 * At this point, no one should be accessing net_device
	 * except in here
	 */
	dev_notice(&device->device, "net device safe to remove\n");

	/* Now, we can close the channel safely */
	vmbus_close(device->channel);

	/* Release all resources */
	vfree(net_device->sub_cb_buf);
	free_netvsc_device(net_device);
	return 0;
}
Example #10
0
/*
 * netvsc_device_add - Callback when the device belonging to this
 * driver is added
 */
int netvsc_device_add(struct hv_device *device, void *additional_info)
{
	int ret = 0;
	int ring_size =
	((struct netvsc_device_info *)additional_info)->ring_size;
	struct netvsc_device *net_device;
	struct net_device *ndev;

	net_device = alloc_net_device(device);
	if (!net_device)
		return -ENOMEM;

	net_device->ring_size = ring_size;

	/*
	 * Coming into this function, struct net_device * is
	 * registered as the driver private data.
	 * In alloc_net_device(), we register struct netvsc_device *
	 * as the driver private data and stash away struct net_device *
	 * in struct netvsc_device *.
	 */
	ndev = net_device->ndev;

	/* Add netvsc_device context to netvsc_device */
	net_device->nd_ctx = netdev_priv(ndev);

	/* Initialize the NetVSC channel extension */
	init_completion(&net_device->channel_init_wait);

	set_per_channel_state(device->channel, net_device->cb_buffer);

	/* Open the channel */
	ret = vmbus_open(device->channel, ring_size * PAGE_SIZE,
			 ring_size * PAGE_SIZE, NULL, 0,
			 netvsc_channel_cb, device->channel);

	if (ret != 0) {
		netdev_err(ndev, "unable to open channel: %d\n", ret);
		goto cleanup;
	}

	/* Channel is opened */
	pr_info("hv_netvsc channel opened successfully\n");

	net_device->chn_table[0] = device->channel;

	/* Connect with the NetVsp */
	ret = netvsc_connect_vsp(device);
	if (ret != 0) {
		netdev_err(ndev,
			"unable to connect to NetVSP - %d\n", ret);
		goto close;
	}

	return ret;

close:
	/* Now, we can close the channel safely */
	vmbus_close(device->channel);

cleanup:
	free_netvsc_device(net_device);

	return ret;
}
Example #11
0
static int
hv_uio_probe(struct hv_device *dev,
	     const struct hv_vmbus_device_id *dev_id)
{
	struct hv_uio_private_data *pdata;
	int ret;

	pdata = kzalloc(sizeof(*pdata), GFP_KERNEL);
	if (!pdata)
		return -ENOMEM;

	ret = vmbus_open(dev->channel, HV_RING_SIZE * PAGE_SIZE,
			 HV_RING_SIZE * PAGE_SIZE, NULL, 0,
			 hv_uio_channel_cb, pdata);
	if (ret)
		goto fail;

	/* Communicating with host has to be via shared memory not hypercall */
	if (!dev->channel->offermsg.monitor_allocated) {
		dev_err(&dev->device, "vmbus channel requires hypercall\n");
		ret = -ENOTSUPP;
		goto fail_close;
	}

	dev->channel->inbound.ring_buffer->interrupt_mask = 1;
	set_channel_read_mode(dev->channel, HV_CALL_ISR);

	/* Fill general uio info */
	pdata->info.name = "uio_hv_generic";
	pdata->info.version = DRIVER_VERSION;
	pdata->info.irqcontrol = hv_uio_irqcontrol;
	pdata->info.irq = UIO_IRQ_CUSTOM;

	/* mem resources */
	pdata->info.mem[TXRX_RING_MAP].name = "txrx_rings";
	pdata->info.mem[TXRX_RING_MAP].addr
		= (phys_addr_t)dev->channel->ringbuffer_pages;
	pdata->info.mem[TXRX_RING_MAP].size
		= dev->channel->ringbuffer_pagecount << PAGE_SHIFT;
	pdata->info.mem[TXRX_RING_MAP].memtype = UIO_MEM_LOGICAL;

	pdata->info.mem[INT_PAGE_MAP].name = "int_page";
	pdata->info.mem[INT_PAGE_MAP].addr
		= (phys_addr_t)vmbus_connection.int_page;
	pdata->info.mem[INT_PAGE_MAP].size = PAGE_SIZE;
	pdata->info.mem[INT_PAGE_MAP].memtype = UIO_MEM_LOGICAL;

	pdata->info.mem[MON_PAGE_MAP].name = "monitor_page";
	pdata->info.mem[MON_PAGE_MAP].addr
		= (phys_addr_t)vmbus_connection.monitor_pages[1];
	pdata->info.mem[MON_PAGE_MAP].size = PAGE_SIZE;
	pdata->info.mem[MON_PAGE_MAP].memtype = UIO_MEM_LOGICAL;
	pdata->recv_buf = vzalloc(RECV_BUFFER_SIZE);
	if (pdata->recv_buf == NULL) {
		ret = -ENOMEM;
		goto fail_close;
	}

	ret = vmbus_establish_gpadl(dev->channel, pdata->recv_buf,
				    RECV_BUFFER_SIZE, &pdata->recv_gpadl);
	if (ret)
		goto fail_close;

	/* put Global Physical Address Label in name */
	snprintf(pdata->recv_name, sizeof(pdata->recv_name),
		 "recv:%u", pdata->recv_gpadl);
	pdata->info.mem[RECV_BUF_MAP].name = pdata->recv_name;
	pdata->info.mem[RECV_BUF_MAP].addr
		= (phys_addr_t)pdata->recv_buf;
	pdata->info.mem[RECV_BUF_MAP].size = RECV_BUFFER_SIZE;
	pdata->info.mem[RECV_BUF_MAP].memtype = UIO_MEM_VIRTUAL;


	pdata->send_buf = vzalloc(SEND_BUFFER_SIZE);
	if (pdata->send_buf == NULL) {
		ret = -ENOMEM;
		goto fail_close;
	}

	ret = vmbus_establish_gpadl(dev->channel, pdata->send_buf,
				    SEND_BUFFER_SIZE, &pdata->send_gpadl);
	if (ret)
		goto fail_close;

	snprintf(pdata->send_name, sizeof(pdata->send_name),
		 "send:%u", pdata->send_gpadl);
	pdata->info.mem[SEND_BUF_MAP].name = pdata->send_name;
	pdata->info.mem[SEND_BUF_MAP].addr
		= (phys_addr_t)pdata->send_buf;
	pdata->info.mem[SEND_BUF_MAP].size = SEND_BUFFER_SIZE;
	pdata->info.mem[SEND_BUF_MAP].memtype = UIO_MEM_VIRTUAL;

	pdata->info.priv = pdata;
	pdata->device = dev;

	ret = uio_register_device(&dev->device, &pdata->info);
	if (ret) {
		dev_err(&dev->device, "hv_uio register failed\n");
		goto fail_close;
	}

	vmbus_set_chn_rescind_callback(dev->channel, hv_uio_rescind);

	hv_set_drvdata(dev, pdata);

	return 0;

fail_close:
	hv_uio_cleanup(dev, pdata);
	vmbus_close(dev->channel);
fail:
	kfree(pdata);

	return ret;
}
Example #12
0
static int hvfb_probe(struct hv_device *hdev,
		      const struct hv_vmbus_device_id *dev_id)
{
	struct fb_info *info;
	struct hvfb_par *par;
	int ret;

	info = framebuffer_alloc(sizeof(struct hvfb_par), &hdev->device);
	if (!info) {
		pr_err("No memory for framebuffer info\n");
		return -ENOMEM;
	}

	par = info->par;
	par->info = info;
	par->fb_ready = false;
	init_completion(&par->wait);
	INIT_DELAYED_WORK(&par->dwork, hvfb_update_work);

	/* Connect to VSP */
	hv_set_drvdata(hdev, info);
	ret = synthvid_connect_vsp(hdev);
	if (ret) {
		pr_err("Unable to connect to VSP\n");
		goto error1;
	}

	ret = hvfb_getmem(info);
	if (ret) {
		pr_err("No memory for framebuffer\n");
		goto error2;
	}

	hvfb_get_option(info);
	pr_info("Screen resolution: %dx%d, Color depth: %d\n",
		screen_width, screen_height, screen_depth);


	/* Set up fb_info */
	info->flags = FBINFO_DEFAULT;

	info->var.xres_virtual = info->var.xres = screen_width;
	info->var.yres_virtual = info->var.yres = screen_height;
	info->var.bits_per_pixel = screen_depth;

	if (info->var.bits_per_pixel == 16) {
		info->var.red = (struct fb_bitfield){11, 5, 0};
		info->var.green = (struct fb_bitfield){5, 6, 0};
		info->var.blue = (struct fb_bitfield){0, 5, 0};
		info->var.transp = (struct fb_bitfield){0, 0, 0};
	} else {
		info->var.red = (struct fb_bitfield){16, 8, 0};
		info->var.green = (struct fb_bitfield){8, 8, 0};
		info->var.blue = (struct fb_bitfield){0, 8, 0};
		info->var.transp = (struct fb_bitfield){24, 8, 0};
	}

	info->var.activate = FB_ACTIVATE_NOW;
	info->var.height = -1;
	info->var.width = -1;
	info->var.vmode = FB_VMODE_NONINTERLACED;

	strcpy(info->fix.id, KBUILD_MODNAME);
	info->fix.type = FB_TYPE_PACKED_PIXELS;
	info->fix.visual = FB_VISUAL_TRUECOLOR;
	info->fix.line_length = screen_width * screen_depth / 8;
	info->fix.accel = FB_ACCEL_NONE;

	info->fbops = &hvfb_ops;
	info->pseudo_palette = par->pseudo_palette;

	/* Send config to host */
	ret = synthvid_send_config(hdev);
	if (ret)
		goto error;

	ret = register_framebuffer(info);
	if (ret) {
		pr_err("Unable to register framebuffer\n");
		goto error;
	}

	par->fb_ready = true;

	par->synchronous_fb = false;
	par->hvfb_panic_nb.notifier_call = hvfb_on_panic;
	atomic_notifier_chain_register(&panic_notifier_list,
				       &par->hvfb_panic_nb);

	return 0;

error:
	hvfb_putmem(info);
error2:
	vmbus_close(hdev->channel);
error1:
	cancel_delayed_work_sync(&par->dwork);
	hv_set_drvdata(hdev, NULL);
	framebuffer_release(info);
	return ret;
}


static int hvfb_remove(struct hv_device *hdev)
{
	struct fb_info *info = hv_get_drvdata(hdev);
	struct hvfb_par *par = info->par;

	atomic_notifier_chain_unregister(&panic_notifier_list,
					 &par->hvfb_panic_nb);

	par->update = false;
	par->fb_ready = false;

	unregister_framebuffer(info);
	cancel_delayed_work_sync(&par->dwork);

	vmbus_close(hdev->channel);
	hv_set_drvdata(hdev, NULL);

	hvfb_putmem(info);
	framebuffer_release(info);

	return 0;
}


static const struct pci_device_id pci_stub_id_table[] = {
	{
		.vendor      = PCI_VENDOR_ID_MICROSOFT,
		.device      = PCI_DEVICE_ID_HYPERV_VIDEO,
	},
	{ /* end of list */ }
};

static const struct hv_vmbus_device_id id_table[] = {
	/* Synthetic Video Device GUID */
	{HV_SYNTHVID_GUID},
	{}
};

MODULE_DEVICE_TABLE(pci, pci_stub_id_table);
MODULE_DEVICE_TABLE(vmbus, id_table);

static struct hv_driver hvfb_drv = {
	.name = KBUILD_MODNAME,
	.id_table = id_table,
	.probe = hvfb_probe,
	.remove = hvfb_remove,
};

static int hvfb_pci_stub_probe(struct pci_dev *pdev,
			       const struct pci_device_id *ent)
{
	return 0;
}

static void hvfb_pci_stub_remove(struct pci_dev *pdev)
{
}

static struct pci_driver hvfb_pci_stub_driver = {
	.name =		KBUILD_MODNAME,
	.id_table =	pci_stub_id_table,
	.probe =	hvfb_pci_stub_probe,
	.remove =	hvfb_pci_stub_remove,
};

static int __init hvfb_drv_init(void)
{
	int ret;

	ret = vmbus_driver_register(&hvfb_drv);
	if (ret != 0)
		return ret;

	ret = pci_register_driver(&hvfb_pci_stub_driver);
	if (ret != 0) {
		vmbus_driver_unregister(&hvfb_drv);
		return ret;
	}

	return 0;
}

static void __exit hvfb_drv_exit(void)
{
	pci_unregister_driver(&hvfb_pci_stub_driver);
	vmbus_driver_unregister(&hvfb_drv);
}

module_init(hvfb_drv_init);
module_exit(hvfb_drv_exit);

MODULE_LICENSE("GPL");
MODULE_VERSION(HV_DRV_VERSION);
MODULE_DESCRIPTION("Microsoft Hyper-V Synthetic Video Frame Buffer Driver");
static int mousevsc_probe(struct hv_device *device,
			const struct hv_vmbus_device_id *dev_id)
{
	int ret;
	struct mousevsc_dev *input_dev;
	struct hid_device *hid_dev;

	input_dev = mousevsc_alloc_device(device);

	if (!input_dev)
		return -ENOMEM;

	ret = vmbus_open(device->channel,
		INPUTVSC_SEND_RING_BUFFER_SIZE,
		INPUTVSC_RECV_RING_BUFFER_SIZE,
		NULL,
		0,
		mousevsc_on_channel_callback,
		device
		);

	if (ret)
		goto probe_err0;

	ret = mousevsc_connect_to_vsp(device);

	if (ret)
		goto probe_err1;

	/* workaround SA-167 */
	if (input_dev->report_desc[14] == 0x25)
		input_dev->report_desc[14] = 0x29;

	hid_dev = hid_allocate_device();
	if (IS_ERR(hid_dev)) {
		ret = PTR_ERR(hid_dev);
		goto probe_err1;
	}

	hid_dev->ll_driver = &mousevsc_ll_driver;
	hid_dev->driver = &mousevsc_hid_driver;
	hid_dev->bus = BUS_VIRTUAL;
	hid_dev->vendor = input_dev->hid_dev_info.vendor;
	hid_dev->product = input_dev->hid_dev_info.product;
	hid_dev->version = input_dev->hid_dev_info.version;
	input_dev->hid_device = hid_dev;

	sprintf(hid_dev->name, "%s", "Microsoft Vmbus HID-compliant Mouse");

	hid_set_drvdata(hid_dev, device);

	ret = hid_add_device(hid_dev);
	if (ret)
		goto probe_err1;


	ret = hid_parse(hid_dev);
	if (ret) {
		hid_err(hid_dev, "parse failed\n");
		goto probe_err2;
	}

	ret = hid_hw_start(hid_dev, HID_CONNECT_HIDINPUT | HID_CONNECT_HIDDEV);

	if (ret) {
		hid_err(hid_dev, "hw start failed\n");
		goto probe_err2;
	}

	input_dev->connected = true;
	input_dev->init_complete = true;

	return ret;

probe_err2:
	hid_destroy_device(hid_dev);

probe_err1:
	vmbus_close(device->channel);

probe_err0:
	mousevsc_free_device(input_dev);

	return ret;
}
Example #14
0
/*
 * netvsc_device_add - Callback when the device belonging to this
 * driver is added
 */
int netvsc_device_add(struct hv_device *device, void *additional_info)
{
	int i, ret = 0;
	int ring_size =
	((struct netvsc_device_info *)additional_info)->ring_size;
	struct netvsc_device *net_device;
	struct net_device *ndev = hv_get_drvdata(device);
	struct net_device_context *net_device_ctx = netdev_priv(ndev);

	net_device = alloc_net_device();
	if (!net_device)
		return -ENOMEM;

	net_device->ring_size = ring_size;

	/* Initialize the NetVSC channel extension */
	init_completion(&net_device->channel_init_wait);

	set_per_channel_state(device->channel, net_device->cb_buffer);

	/* Open the channel */
	ret = vmbus_open(device->channel, ring_size * PAGE_SIZE,
			 ring_size * PAGE_SIZE, NULL, 0,
			 netvsc_channel_cb, device->channel);

	if (ret != 0) {
		netdev_err(ndev, "unable to open channel: %d\n", ret);
		goto cleanup;
	}

	/* Channel is opened */
	pr_info("hv_netvsc channel opened successfully\n");

	/* If we're reopening the device we may have multiple queues, fill the
	 * chn_table with the default channel to use it before subchannels are
	 * opened.
	 */
	for (i = 0; i < VRSS_CHANNEL_MAX; i++)
		net_device->chn_table[i] = device->channel;

	/* Writing nvdev pointer unlocks netvsc_send(), make sure chn_table is
	 * populated.
	 */
	wmb();

	net_device_ctx->nvdev = net_device;

	/* Connect with the NetVsp */
	ret = netvsc_connect_vsp(device);
	if (ret != 0) {
		netdev_err(ndev,
			"unable to connect to NetVSP - %d\n", ret);
		goto close;
	}

	return ret;

close:
	/* Now, we can close the channel safely */
	vmbus_close(device->channel);

cleanup:
	free_netvsc_device(net_device);

	return ret;
}