static
THREAD_FUNCTION thread_encoding_proc(void *p_data)
{
#if CONFIG_MULTITHREAD
int ithread = ((ENCODETHREAD_DATA *)p_data)->ithread;
VP8_COMP *cpi = (VP8_COMP *)(((ENCODETHREAD_DATA *)p_data)->ptr1);
MB_ROW_COMP *mbri = (MB_ROW_COMP *)(((ENCODETHREAD_DATA *)p_data)->ptr2);
ENTROPY_CONTEXT_PLANES mb_row_left_context;
//printf("Started thread %d\n", ithread);
while (1)
{
if (cpi->b_multi_threaded == 0)
break;
//if(WaitForSingleObject(cpi->h_event_mbrencoding[ithread], INFINITE) == WAIT_OBJECT_0)
if (sem_wait(&cpi->h_event_mbrencoding[ithread]) == 0)
{
if (cpi->b_multi_threaded == FALSE) // we're shutting down
break;
else
{
VP8_COMMON *cm = &cpi->common;
int mb_row = mbri->mb_row;
MACROBLOCK *x = &mbri->mb;
MACROBLOCKD *xd = &x->e_mbd;
TOKENEXTRA **tp = &mbri->tp;
int *segment_counts = mbri->segment_counts;
int *totalrate = &mbri->totalrate;
{
int i;
int recon_yoffset, recon_uvoffset;
int mb_col;
int ref_fb_idx = cm->lst_fb_idx;
int dst_fb_idx = cm->new_fb_idx;
int recon_y_stride = cm->yv12_fb[ref_fb_idx].y_stride;
int recon_uv_stride = cm->yv12_fb[ref_fb_idx].uv_stride;
volatile int *last_row_current_mb_col;
if (ithread > 0)
last_row_current_mb_col = &cpi->mb_row_ei[ithread-1].current_mb_col;
else
last_row_current_mb_col = &cpi->current_mb_col_main;
// reset above block coeffs
xd->above_context = cm->above_context;
xd->left_context = &mb_row_left_context;
vp8_zero(mb_row_left_context);
xd->up_available = (mb_row != 0);
recon_yoffset = (mb_row * recon_y_stride * 16);
recon_uvoffset = (mb_row * recon_uv_stride * 8);
cpi->tplist[mb_row].start = *tp;
//printf("Thread mb_row = %d\n", mb_row);
// for each macroblock col in image
for (mb_col = 0; mb_col < cm->mb_cols; mb_col++)
{
int seg_map_index = (mb_row * cm->mb_cols);
while (mb_col > (*last_row_current_mb_col - 1) && *last_row_current_mb_col != cm->mb_cols - 1)
{
x86_pause_hint();
thread_sleep(0);
}
// Distance of Mb to the various image edges.
// These specified to 8th pel as they are always compared to values that are in 1/8th pel units
xd->mb_to_left_edge = -((mb_col * 16) << 3);
xd->mb_to_right_edge = ((cm->mb_cols - 1 - mb_col) * 16) << 3;
xd->mb_to_top_edge = -((mb_row * 16) << 3);
xd->mb_to_bottom_edge = ((cm->mb_rows - 1 - mb_row) * 16) << 3;
// Set up limit values for motion vectors used to prevent them extending outside the UMV borders
x->mv_col_min = -((mb_col * 16) + (VP8BORDERINPIXELS - 16));
x->mv_col_max = ((cm->mb_cols - 1 - mb_col) * 16) + (VP8BORDERINPIXELS - 16);
x->mv_row_min = -((mb_row * 16) + (VP8BORDERINPIXELS - 16));
x->mv_row_max = ((cm->mb_rows - 1 - mb_row) * 16) + (VP8BORDERINPIXELS - 16);
xd->dst.y_buffer = cm->yv12_fb[dst_fb_idx].y_buffer + recon_yoffset;
xd->dst.u_buffer = cm->yv12_fb[dst_fb_idx].u_buffer + recon_uvoffset;
xd->dst.v_buffer = cm->yv12_fb[dst_fb_idx].v_buffer + recon_uvoffset;
xd->left_available = (mb_col != 0);
// Is segmentation enabled
// MB level adjutment to quantizer
if (xd->segmentation_enabled)
{
// Code to set segment id in xd->mbmi.segment_id for current MB (with range checking)
if (cpi->segmentation_map[seg_map_index+mb_col] <= 3)
xd->mode_info_context->mbmi.segment_id = cpi->segmentation_map[seg_map_index+mb_col];
else
xd->mode_info_context->mbmi.segment_id = 0;
vp8cx_mb_init_quantizer(cpi, x);
}
else
xd->mode_info_context->mbmi.segment_id = 0; // Set to Segment 0 by default
if (cm->frame_type == KEY_FRAME)
{
*totalrate += vp8cx_encode_intra_macro_block(cpi, x, tp);
#ifdef MODE_STATS
y_modes[xd->mbmi.mode] ++;
#endif
}
else
{
*totalrate += vp8cx_encode_inter_macroblock(cpi, x, tp, recon_yoffset, recon_uvoffset);
#ifdef MODE_STATS
inter_y_modes[xd->mbmi.mode] ++;
if (xd->mbmi.mode == SPLITMV)
{
int b;
for (b = 0; b < xd->mbmi.partition_count; b++)
{
inter_b_modes[x->partition->bmi[b].mode] ++;
}
}
#endif
// Count of last ref frame 0,0 useage
if ((xd->mode_info_context->mbmi.mode == ZEROMV) && (xd->mode_info_context->mbmi.ref_frame == LAST_FRAME))
cpi->inter_zz_count ++;
}
cpi->tplist[mb_row].stop = *tp;
x->gf_active_ptr++; // Increment pointer into gf useage flags structure for next mb
for (i = 0; i < 16; i++)
vpx_memcpy(&xd->mode_info_context->bmi[i], &xd->block[i].bmi, sizeof(xd->block[i].bmi));
// adjust to the next column of macroblocks
x->src.y_buffer += 16;
x->src.u_buffer += 8;
x->src.v_buffer += 8;
recon_yoffset += 16;
recon_uvoffset += 8;
// Keep track of segment useage
segment_counts[xd->mode_info_context->mbmi.segment_id] ++;
// skip to next mb
xd->mode_info_context++;
x->partition_info++;
xd->above_context++;
cpi->mb_row_ei[ithread].current_mb_col = mb_col;
}
//extend the recon for intra prediction
vp8_extend_mb_row(
&cm->yv12_fb[dst_fb_idx],
xd->dst.y_buffer + 16,
xd->dst.u_buffer + 8,
xd->dst.v_buffer + 8);
// this is to account for the border
xd->mode_info_context++;
x->partition_info++;
x->src.y_buffer += 16 * x->src.y_stride * (cpi->encoding_thread_count + 1) - 16 * cm->mb_cols;
x->src.u_buffer += 8 * x->src.uv_stride * (cpi->encoding_thread_count + 1) - 8 * cm->mb_cols;
x->src.v_buffer += 8 * x->src.uv_stride * (cpi->encoding_thread_count + 1) - 8 * cm->mb_cols;
xd->mode_info_context += xd->mode_info_stride * cpi->encoding_thread_count;
x->partition_info += xd->mode_info_stride * cpi->encoding_thread_count;
if (ithread == (cpi->encoding_thread_count - 1) || mb_row == cm->mb_rows - 1)
{
//SetEvent(cpi->h_event_main);
sem_post(&cpi->h_event_main);
}
}
}
}
}
#else
(void) p_data;
#endif
//printf("exit thread %d\n", ithread);
return 0;
}
static
THREAD_FUNCTION thread_encoding_proc(void *p_data)
{
int ithread = ((ENCODETHREAD_DATA *)p_data)->ithread;
VP8_COMP *cpi = (VP8_COMP *)(((ENCODETHREAD_DATA *)p_data)->ptr1);
MB_ROW_COMP *mbri = (MB_ROW_COMP *)(((ENCODETHREAD_DATA *)p_data)->ptr2);
ENTROPY_CONTEXT_PLANES mb_row_left_context;
while (1)
{
if (cpi->b_multi_threaded == 0)
break;
if (sem_wait(&cpi->h_event_start_encoding[ithread]) == 0)
{
const int nsync = cpi->mt_sync_range;
VP8_COMMON *cm = &cpi->common;
int mb_row;
MACROBLOCK *x = &mbri->mb;
MACROBLOCKD *xd = &x->e_mbd;
TOKENEXTRA *tp ;
#if CONFIG_REALTIME_ONLY & CONFIG_ONTHEFLY_BITPACKING
TOKENEXTRA *tp_start = cpi->tok + (1 + ithread) * (16 * 24);
const int num_part = (1 << cm->multi_token_partition);
#endif
int *segment_counts = mbri->segment_counts;
int *totalrate = &mbri->totalrate;
if (cpi->b_multi_threaded == 0) /* we're shutting down */
break;
for (mb_row = ithread + 1; mb_row < cm->mb_rows; mb_row += (cpi->encoding_thread_count + 1))
{
int recon_yoffset, recon_uvoffset;
int mb_col;
int ref_fb_idx = cm->lst_fb_idx;
int dst_fb_idx = cm->new_fb_idx;
int recon_y_stride = cm->yv12_fb[ref_fb_idx].y_stride;
int recon_uv_stride = cm->yv12_fb[ref_fb_idx].uv_stride;
int map_index = (mb_row * cm->mb_cols);
volatile const int *last_row_current_mb_col;
volatile int *current_mb_col = &cpi->mt_current_mb_col[mb_row];
#if (CONFIG_REALTIME_ONLY & CONFIG_ONTHEFLY_BITPACKING)
vp8_writer *w = &cpi->bc[1 + (mb_row % num_part)];
#else
tp = cpi->tok + (mb_row * (cm->mb_cols * 16 * 24));
cpi->tplist[mb_row].start = tp;
#endif
last_row_current_mb_col = &cpi->mt_current_mb_col[mb_row - 1];
/* reset above block coeffs */
xd->above_context = cm->above_context;
xd->left_context = &mb_row_left_context;
vp8_zero(mb_row_left_context);
xd->up_available = (mb_row != 0);
recon_yoffset = (mb_row * recon_y_stride * 16);
recon_uvoffset = (mb_row * recon_uv_stride * 8);
/* Set the mb activity pointer to the start of the row. */
x->mb_activity_ptr = &cpi->mb_activity_map[map_index];
/* for each macroblock col in image */
for (mb_col = 0; mb_col < cm->mb_cols; mb_col++)
{
*current_mb_col = mb_col - 1;
if ((mb_col & (nsync - 1)) == 0)
{
while (mb_col > (*last_row_current_mb_col - nsync))
{
x86_pause_hint();
thread_sleep(0);
}
}
#if CONFIG_REALTIME_ONLY & CONFIG_ONTHEFLY_BITPACKING
tp = tp_start;
#endif
/* Distance of Mb to the various image edges.
* These specified to 8th pel as they are always compared
* to values that are in 1/8th pel units
*/
xd->mb_to_left_edge = -((mb_col * 16) << 3);
xd->mb_to_right_edge = ((cm->mb_cols - 1 - mb_col) * 16) << 3;
xd->mb_to_top_edge = -((mb_row * 16) << 3);
xd->mb_to_bottom_edge = ((cm->mb_rows - 1 - mb_row) * 16) << 3;
/* Set up limit values for motion vectors used to prevent
* them extending outside the UMV borders
*/
x->mv_col_min = -((mb_col * 16) + (VP8BORDERINPIXELS - 16));
x->mv_col_max = ((cm->mb_cols - 1 - mb_col) * 16) + (VP8BORDERINPIXELS - 16);
x->mv_row_min = -((mb_row * 16) + (VP8BORDERINPIXELS - 16));
x->mv_row_max = ((cm->mb_rows - 1 - mb_row) * 16) + (VP8BORDERINPIXELS - 16);
xd->dst.y_buffer = cm->yv12_fb[dst_fb_idx].y_buffer + recon_yoffset;
xd->dst.u_buffer = cm->yv12_fb[dst_fb_idx].u_buffer + recon_uvoffset;
xd->dst.v_buffer = cm->yv12_fb[dst_fb_idx].v_buffer + recon_uvoffset;
xd->left_available = (mb_col != 0);
x->rddiv = cpi->RDDIV;
x->rdmult = cpi->RDMULT;
/* Copy current mb to a buffer */
vp8_copy_mem16x16(x->src.y_buffer, x->src.y_stride, x->thismb, 16);
if (cpi->oxcf.tuning == VP8_TUNE_SSIM)
vp8_activity_masking(cpi, x);
/* Is segmentation enabled */
/* MB level adjustment to quantizer */
if (xd->segmentation_enabled)
{
/* Code to set segment id in xd->mbmi.segment_id for
* current MB (with range checking)
*/
if (cpi->segmentation_map[map_index + mb_col] <= 3)
xd->mode_info_context->mbmi.segment_id = cpi->segmentation_map[map_index + mb_col];
else
xd->mode_info_context->mbmi.segment_id = 0;
vp8cx_mb_init_quantizer(cpi, x, 1);
}
else
/* Set to Segment 0 by default */
xd->mode_info_context->mbmi.segment_id = 0;
x->active_ptr = cpi->active_map + map_index + mb_col;
if (cm->frame_type == KEY_FRAME)
{
*totalrate += vp8cx_encode_intra_macroblock(cpi, x, &tp);
#ifdef MODE_STATS
y_modes[xd->mbmi.mode] ++;
#endif
}
else
{
*totalrate += vp8cx_encode_inter_macroblock(cpi, x, &tp, recon_yoffset, recon_uvoffset, mb_row, mb_col);
#ifdef MODE_STATS
inter_y_modes[xd->mbmi.mode] ++;
if (xd->mbmi.mode == SPLITMV)
{
int b;
for (b = 0; b < xd->mbmi.partition_count; b++)
{
inter_b_modes[x->partition->bmi[b].mode] ++;
}
}
#endif
/* Special case code for cyclic refresh
* If cyclic update enabled then copy
* xd->mbmi.segment_id; (which may have been updated
* based on mode during
* vp8cx_encode_inter_macroblock()) back into the
* global segmentation map
*/
if (cpi->cyclic_refresh_mode_enabled && xd->segmentation_enabled)
{
const MB_MODE_INFO * mbmi = &xd->mode_info_context->mbmi;
cpi->segmentation_map[map_index + mb_col] = mbmi->segment_id;
/* If the block has been refreshed mark it as clean
* (the magnitude of the -ve influences how long it
* will be before we consider another refresh):
* Else if it was coded (last frame 0,0) and has
* not already been refreshed then mark it as a
* candidate for cleanup next time (marked 0) else
* mark it as dirty (1).
*/
if (mbmi->segment_id)
cpi->cyclic_refresh_map[map_index + mb_col] = -1;
else if ((mbmi->mode == ZEROMV) && (mbmi->ref_frame == LAST_FRAME))
{
if (cpi->cyclic_refresh_map[map_index + mb_col] == 1)
cpi->cyclic_refresh_map[map_index + mb_col] = 0;
}
else
cpi->cyclic_refresh_map[map_index + mb_col] = 1;
}
}
#if CONFIG_REALTIME_ONLY & CONFIG_ONTHEFLY_BITPACKING
/* pack tokens for this MB */
{
int tok_count = tp - tp_start;
pack_tokens(w, tp_start, tok_count);
}
#else
cpi->tplist[mb_row].stop = tp;
#endif
/* Increment pointer into gf usage flags structure. */
x->gf_active_ptr++;
/* Increment the activity mask pointers. */
x->mb_activity_ptr++;
/* adjust to the next column of macroblocks */
x->src.y_buffer += 16;
x->src.u_buffer += 8;
x->src.v_buffer += 8;
recon_yoffset += 16;
recon_uvoffset += 8;
/* Keep track of segment usage */
segment_counts[xd->mode_info_context->mbmi.segment_id]++;
/* skip to next mb */
xd->mode_info_context++;
x->partition_info++;
xd->above_context++;
}
vp8_extend_mb_row( &cm->yv12_fb[dst_fb_idx],
xd->dst.y_buffer + 16,
xd->dst.u_buffer + 8,
xd->dst.v_buffer + 8);
*current_mb_col = mb_col + nsync;
/* this is to account for the border */
xd->mode_info_context++;
x->partition_info++;
x->src.y_buffer += 16 * x->src.y_stride * (cpi->encoding_thread_count + 1) - 16 * cm->mb_cols;
x->src.u_buffer += 8 * x->src.uv_stride * (cpi->encoding_thread_count + 1) - 8 * cm->mb_cols;
x->src.v_buffer += 8 * x->src.uv_stride * (cpi->encoding_thread_count + 1) - 8 * cm->mb_cols;
xd->mode_info_context += xd->mode_info_stride * cpi->encoding_thread_count;
x->partition_info += xd->mode_info_stride * cpi->encoding_thread_count;
x->gf_active_ptr += cm->mb_cols * cpi->encoding_thread_count;
if (mb_row == cm->mb_rows - 1)
{
sem_post(&cpi->h_event_end_encoding); /* signal frame encoding end */
}
}
}
}
/* printf("exit thread %d\n", ithread); */
return 0;
}
static
THREAD_FUNCTION thread_encoding_proc(void *p_data)
{
int ithread = ((ENCODETHREAD_DATA *)p_data)->ithread;
VP8_COMP *cpi = (VP8_COMP *)(((ENCODETHREAD_DATA *)p_data)->ptr1);
MB_ROW_COMP *mbri = (MB_ROW_COMP *)(((ENCODETHREAD_DATA *)p_data)->ptr2);
ENTROPY_CONTEXT_PLANES mb_row_left_context;
const int nsync = cpi->mt_sync_range;
//printf("Started thread %d\n", ithread);
while (1)
{
if (cpi->b_multi_threaded == 0)
break;
//if(WaitForSingleObject(cpi->h_event_mbrencoding[ithread], INFINITE) == WAIT_OBJECT_0)
if (sem_wait(&cpi->h_event_start_encoding[ithread]) == 0)
{
VP8_COMMON *cm = &cpi->common;
int mb_row;
MACROBLOCK *x = &mbri->mb;
MACROBLOCKD *xd = &x->e_mbd;
TOKENEXTRA *tp ;
int *segment_counts = mbri->segment_counts;
int *totalrate = &mbri->totalrate;
if (cpi->b_multi_threaded == 0) // we're shutting down
break;
for (mb_row = ithread + 1; mb_row < cm->mb_rows; mb_row += (cpi->encoding_thread_count + 1))
{
int recon_yoffset, recon_uvoffset;
int mb_col;
int ref_fb_idx = cm->lst_fb_idx;
int dst_fb_idx = cm->new_fb_idx;
int recon_y_stride = cm->yv12_fb[ref_fb_idx].y_stride;
int recon_uv_stride = cm->yv12_fb[ref_fb_idx].uv_stride;
int map_index = (mb_row * cm->mb_cols);
volatile int *last_row_current_mb_col;
tp = cpi->tok + (mb_row * (cm->mb_cols * 16 * 24));
last_row_current_mb_col = &cpi->mt_current_mb_col[mb_row - 1];
// reset above block coeffs
xd->above_context = cm->above_context;
xd->left_context = &mb_row_left_context;
vp8_zero(mb_row_left_context);
xd->up_available = (mb_row != 0);
recon_yoffset = (mb_row * recon_y_stride * 16);
recon_uvoffset = (mb_row * recon_uv_stride * 8);
cpi->tplist[mb_row].start = tp;
//printf("Thread mb_row = %d\n", mb_row);
// Set the mb activity pointer to the start of the row.
x->mb_activity_ptr = &cpi->mb_activity_map[map_index];
// for each macroblock col in image
for (mb_col = 0; mb_col < cm->mb_cols; mb_col++)
{
if ((mb_col & (nsync - 1)) == 0)
{
while (mb_col > (*last_row_current_mb_col - nsync) && *last_row_current_mb_col != cm->mb_cols - 1)
{
x86_pause_hint();
thread_sleep(0);
}
}
// Distance of Mb to the various image edges.
// These specified to 8th pel as they are always compared to values that are in 1/8th pel units
xd->mb_to_left_edge = -((mb_col * 16) << 3);
xd->mb_to_right_edge = ((cm->mb_cols - 1 - mb_col) * 16) << 3;
xd->mb_to_top_edge = -((mb_row * 16) << 3);
xd->mb_to_bottom_edge = ((cm->mb_rows - 1 - mb_row) * 16) << 3;
// Set up limit values for motion vectors used to prevent them extending outside the UMV borders
x->mv_col_min = -((mb_col * 16) + (VP8BORDERINPIXELS - 16));
x->mv_col_max = ((cm->mb_cols - 1 - mb_col) * 16) + (VP8BORDERINPIXELS - 16);
x->mv_row_min = -((mb_row * 16) + (VP8BORDERINPIXELS - 16));
x->mv_row_max = ((cm->mb_rows - 1 - mb_row) * 16) + (VP8BORDERINPIXELS - 16);
xd->dst.y_buffer = cm->yv12_fb[dst_fb_idx].y_buffer + recon_yoffset;
xd->dst.u_buffer = cm->yv12_fb[dst_fb_idx].u_buffer + recon_uvoffset;
xd->dst.v_buffer = cm->yv12_fb[dst_fb_idx].v_buffer + recon_uvoffset;
xd->left_available = (mb_col != 0);
x->rddiv = cpi->RDDIV;
x->rdmult = cpi->RDMULT;
//Copy current mb to a buffer
vp8_copy_mem16x16(x->src.y_buffer, x->src.y_stride, x->thismb, 16);
if (cpi->oxcf.tuning == VP8_TUNE_SSIM)
vp8_activity_masking(cpi, x);
// Is segmentation enabled
// MB level adjutment to quantizer
if (xd->segmentation_enabled)
{
// Code to set segment id in xd->mbmi.segment_id for current MB (with range checking)
if (cpi->segmentation_map[map_index + mb_col] <= 3)
xd->mode_info_context->mbmi.segment_id = cpi->segmentation_map[map_index + mb_col];
else
xd->mode_info_context->mbmi.segment_id = 0;
vp8cx_mb_init_quantizer(cpi, x, 1);
}
else
xd->mode_info_context->mbmi.segment_id = 0; // Set to Segment 0 by default
x->active_ptr = cpi->active_map + map_index + mb_col;
if (cm->frame_type == KEY_FRAME)
{
*totalrate += vp8cx_encode_intra_macro_block(cpi, x, &tp);
#ifdef MODE_STATS
y_modes[xd->mbmi.mode] ++;
#endif
}
else
{
*totalrate += vp8cx_encode_inter_macroblock(cpi, x, &tp, recon_yoffset, recon_uvoffset);
#ifdef MODE_STATS
inter_y_modes[xd->mbmi.mode] ++;
if (xd->mbmi.mode == SPLITMV)
{
int b;
for (b = 0; b < xd->mbmi.partition_count; b++)
{
inter_b_modes[x->partition->bmi[b].mode] ++;
}
}
#endif
// Count of last ref frame 0,0 useage
if ((xd->mode_info_context->mbmi.mode == ZEROMV) && (xd->mode_info_context->mbmi.ref_frame == LAST_FRAME))
cpi->inter_zz_count++;
// Special case code for cyclic refresh
// If cyclic update enabled then copy xd->mbmi.segment_id; (which may have been updated based on mode
// during vp8cx_encode_inter_macroblock()) back into the global sgmentation map
if (cpi->cyclic_refresh_mode_enabled && xd->segmentation_enabled)
{
const MB_MODE_INFO * mbmi = &xd->mode_info_context->mbmi;
cpi->segmentation_map[map_index + mb_col] = mbmi->segment_id;
// If the block has been refreshed mark it as clean (the magnitude of the -ve influences how long it will be before we consider another refresh):
// Else if it was coded (last frame 0,0) and has not already been refreshed then mark it as a candidate for cleanup next time (marked 0)
// else mark it as dirty (1).
if (mbmi->segment_id)
cpi->cyclic_refresh_map[map_index + mb_col] = -1;
else if ((mbmi->mode == ZEROMV) && (mbmi->ref_frame == LAST_FRAME))
{
if (cpi->cyclic_refresh_map[map_index + mb_col] == 1)
cpi->cyclic_refresh_map[map_index + mb_col] = 0;
}
else
cpi->cyclic_refresh_map[map_index + mb_col] = 1;
}
}
cpi->tplist[mb_row].stop = tp;
// Increment pointer into gf useage flags structure.
x->gf_active_ptr++;
// Increment the activity mask pointers.
x->mb_activity_ptr++;
// adjust to the next column of macroblocks
x->src.y_buffer += 16;
x->src.u_buffer += 8;
x->src.v_buffer += 8;
recon_yoffset += 16;
recon_uvoffset += 8;
// Keep track of segment useage
segment_counts[xd->mode_info_context->mbmi.segment_id]++;
// skip to next mb
xd->mode_info_context++;
x->partition_info++;
xd->above_context++;
cpi->mt_current_mb_col[mb_row] = mb_col;
}
//extend the recon for intra prediction
vp8_extend_mb_row(
&cm->yv12_fb[dst_fb_idx],
xd->dst.y_buffer + 16,
xd->dst.u_buffer + 8,
xd->dst.v_buffer + 8);
// this is to account for the border
xd->mode_info_context++;
x->partition_info++;
x->src.y_buffer += 16 * x->src.y_stride * (cpi->encoding_thread_count + 1) - 16 * cm->mb_cols;
x->src.u_buffer += 8 * x->src.uv_stride * (cpi->encoding_thread_count + 1) - 8 * cm->mb_cols;
x->src.v_buffer += 8 * x->src.uv_stride * (cpi->encoding_thread_count + 1) - 8 * cm->mb_cols;
xd->mode_info_context += xd->mode_info_stride * cpi->encoding_thread_count;
x->partition_info += xd->mode_info_stride * cpi->encoding_thread_count;
x->gf_active_ptr += cm->mb_cols * cpi->encoding_thread_count;
if (mb_row == cm->mb_rows - 1)
{
//SetEvent(cpi->h_event_main);
sem_post(&cpi->h_event_end_encoding); /* signal frame encoding end */
}
}
}
}
//printf("exit thread %d\n", ithread);
return 0;
}
