static inline void vsp1_lif_write(struct vsp1_lif *lif, struct vsp1_dl_list *dl,
u32 reg, u32 data)
{
vsp1_dl_list_write(dl, reg, data);
}
static void wpf_configure(struct vsp1_entity *entity,
struct vsp1_pipeline *pipe,
struct vsp1_dl_list *dl)
{
struct vsp1_rwpf *wpf = to_rwpf(&entity->subdev);
struct vsp1_device *vsp1 = wpf->entity.vsp1;
const struct v4l2_mbus_framefmt *source_format;
const struct v4l2_mbus_framefmt *sink_format;
const struct v4l2_rect *crop;
unsigned int i;
u32 outfmt = 0;
u32 srcrpf = 0;
/* Cropping */
crop = vsp1_rwpf_get_crop(wpf, wpf->entity.config);
vsp1_wpf_write(wpf, dl, VI6_WPF_HSZCLIP, VI6_WPF_SZCLIP_EN |
(crop->left << VI6_WPF_SZCLIP_OFST_SHIFT) |
(crop->width << VI6_WPF_SZCLIP_SIZE_SHIFT));
vsp1_wpf_write(wpf, dl, VI6_WPF_VSZCLIP, VI6_WPF_SZCLIP_EN |
(crop->top << VI6_WPF_SZCLIP_OFST_SHIFT) |
(crop->height << VI6_WPF_SZCLIP_SIZE_SHIFT));
/* Format */
sink_format = vsp1_entity_get_pad_format(&wpf->entity,
wpf->entity.config,
RWPF_PAD_SINK);
source_format = vsp1_entity_get_pad_format(&wpf->entity,
wpf->entity.config,
RWPF_PAD_SOURCE);
if (!pipe->lif) {
const struct v4l2_pix_format_mplane *format = &wpf->format;
const struct vsp1_format_info *fmtinfo = wpf->fmtinfo;
outfmt = fmtinfo->hwfmt << VI6_WPF_OUTFMT_WRFMT_SHIFT;
if (fmtinfo->alpha)
outfmt |= VI6_WPF_OUTFMT_PXA;
if (fmtinfo->swap_yc)
outfmt |= VI6_WPF_OUTFMT_SPYCS;
if (fmtinfo->swap_uv)
outfmt |= VI6_WPF_OUTFMT_SPUVS;
/* Destination stride and byte swapping. */
vsp1_wpf_write(wpf, dl, VI6_WPF_DSTM_STRIDE_Y,
format->plane_fmt[0].bytesperline);
if (format->num_planes > 1)
vsp1_wpf_write(wpf, dl, VI6_WPF_DSTM_STRIDE_C,
format->plane_fmt[1].bytesperline);
vsp1_wpf_write(wpf, dl, VI6_WPF_DSWAP, fmtinfo->swap);
}
if (sink_format->code != source_format->code)
outfmt |= VI6_WPF_OUTFMT_CSC;
outfmt |= wpf->alpha << VI6_WPF_OUTFMT_PDV_SHIFT;
vsp1_wpf_write(wpf, dl, VI6_WPF_OUTFMT, outfmt);
vsp1_dl_list_write(dl, VI6_DPR_WPF_FPORCH(wpf->entity.index),
VI6_DPR_WPF_FPORCH_FP_WPFN);
vsp1_dl_list_write(dl, VI6_WPF_WRBCK_CTRL, 0);
/* Sources. If the pipeline has a single input and BRU is not used,
* configure it as the master layer. Otherwise configure all
* inputs as sub-layers and select the virtual RPF as the master
* layer.
*/
for (i = 0; i < vsp1->info->rpf_count; ++i) {
struct vsp1_rwpf *input = pipe->inputs[i];
if (!input)
continue;
srcrpf |= (!pipe->bru && pipe->num_inputs == 1)
? VI6_WPF_SRCRPF_RPF_ACT_MST(input->entity.index)
: VI6_WPF_SRCRPF_RPF_ACT_SUB(input->entity.index);
}
if (pipe->bru || pipe->num_inputs > 1)
srcrpf |= VI6_WPF_SRCRPF_VIRACT_MST;
vsp1_wpf_write(wpf, dl, VI6_WPF_SRCRPF, srcrpf);
/* Enable interrupts */
vsp1_dl_list_write(dl, VI6_WPF_IRQ_STA(wpf->entity.index), 0);
vsp1_dl_list_write(dl, VI6_WPF_IRQ_ENB(wpf->entity.index),
VI6_WFP_IRQ_ENB_FREE);
}
static inline void vsp1_wpf_write(struct vsp1_rwpf *wpf,
struct vsp1_dl_list *dl, u32 reg, u32 data)
{
vsp1_dl_list_write(dl, reg + wpf->entity.index * VI6_WPF_OFFSET, data);
}
static inline void vsp1_hsit_write(struct vsp1_hsit *hsit,
struct vsp1_dl_list *dl, u32 reg, u32 data)
{
vsp1_dl_list_write(dl, reg, data);
}
static inline void vsp1_clu_write(struct vsp1_clu *clu, struct vsp1_dl_list *dl,
u32 reg, u32 data)
{
vsp1_dl_list_write(dl, reg, data);
}
static void wpf_configure(struct vsp1_entity *entity,
struct vsp1_pipeline *pipe,
struct vsp1_dl_list *dl,
enum vsp1_entity_params params)
{
struct vsp1_rwpf *wpf = to_rwpf(&entity->subdev);
struct vsp1_device *vsp1 = wpf->entity.vsp1;
const struct v4l2_mbus_framefmt *source_format;
const struct v4l2_mbus_framefmt *sink_format;
unsigned int i;
u32 outfmt = 0;
u32 srcrpf = 0;
if (params == VSP1_ENTITY_PARAMS_RUNTIME) {
const unsigned int mask = BIT(WPF_CTRL_VFLIP)
| BIT(WPF_CTRL_HFLIP);
unsigned long flags;
spin_lock_irqsave(&wpf->flip.lock, flags);
wpf->flip.active = (wpf->flip.active & ~mask)
| (wpf->flip.pending & mask);
spin_unlock_irqrestore(&wpf->flip.lock, flags);
outfmt = (wpf->alpha << VI6_WPF_OUTFMT_PDV_SHIFT) | wpf->outfmt;
if (wpf->flip.active & BIT(WPF_CTRL_VFLIP))
outfmt |= VI6_WPF_OUTFMT_FLP;
if (wpf->flip.active & BIT(WPF_CTRL_HFLIP))
outfmt |= VI6_WPF_OUTFMT_HFLP;
vsp1_wpf_write(wpf, dl, VI6_WPF_OUTFMT, outfmt);
return;
}
sink_format = vsp1_entity_get_pad_format(&wpf->entity,
wpf->entity.config,
RWPF_PAD_SINK);
source_format = vsp1_entity_get_pad_format(&wpf->entity,
wpf->entity.config,
RWPF_PAD_SOURCE);
if (params == VSP1_ENTITY_PARAMS_PARTITION) {
const struct v4l2_pix_format_mplane *format = &wpf->format;
struct vsp1_rwpf_memory mem = wpf->mem;
unsigned int flip = wpf->flip.active;
unsigned int width = source_format->width;
unsigned int height = source_format->height;
unsigned int offset;
/*
* Cropping. The partition algorithm can split the image into
* multiple slices.
*/
if (pipe->partitions > 1)
width = pipe->partition.width;
vsp1_wpf_write(wpf, dl, VI6_WPF_HSZCLIP, VI6_WPF_SZCLIP_EN |
(0 << VI6_WPF_SZCLIP_OFST_SHIFT) |
(width << VI6_WPF_SZCLIP_SIZE_SHIFT));
vsp1_wpf_write(wpf, dl, VI6_WPF_VSZCLIP, VI6_WPF_SZCLIP_EN |
(0 << VI6_WPF_SZCLIP_OFST_SHIFT) |
(height << VI6_WPF_SZCLIP_SIZE_SHIFT));
if (pipe->lif)
return;
/*
* Update the memory offsets based on flipping configuration.
* The destination addresses point to the locations where the
* VSP starts writing to memory, which can be different corners
* of the image depending on vertical flipping.
*/
if (pipe->partitions > 1) {
const struct vsp1_format_info *fmtinfo = wpf->fmtinfo;
/*
* Horizontal flipping is handled through a line buffer
* and doesn't modify the start address, but still needs
* to be handled when image partitioning is in effect to
* order the partitions correctly.
*/
if (flip & BIT(WPF_CTRL_HFLIP))
offset = format->width - pipe->partition.left
- pipe->partition.width;
else
offset = pipe->partition.left;
mem.addr[0] += offset * fmtinfo->bpp[0] / 8;
if (format->num_planes > 1) {
mem.addr[1] += offset / fmtinfo->hsub
* fmtinfo->bpp[1] / 8;
mem.addr[2] += offset / fmtinfo->hsub
* fmtinfo->bpp[2] / 8;
}
}
if (flip & BIT(WPF_CTRL_VFLIP)) {
mem.addr[0] += (format->height - 1)
* format->plane_fmt[0].bytesperline;
if (format->num_planes > 1) {
offset = (format->height / wpf->fmtinfo->vsub - 1)
* format->plane_fmt[1].bytesperline;
mem.addr[1] += offset;
mem.addr[2] += offset;
}
}
vsp1_wpf_write(wpf, dl, VI6_WPF_DSTM_ADDR_Y, mem.addr[0]);
vsp1_wpf_write(wpf, dl, VI6_WPF_DSTM_ADDR_C0, mem.addr[1]);
vsp1_wpf_write(wpf, dl, VI6_WPF_DSTM_ADDR_C1, mem.addr[2]);
return;
}
/* Format */
if (!pipe->lif) {
const struct v4l2_pix_format_mplane *format = &wpf->format;
const struct vsp1_format_info *fmtinfo = wpf->fmtinfo;
outfmt = fmtinfo->hwfmt << VI6_WPF_OUTFMT_WRFMT_SHIFT;
if (fmtinfo->alpha)
outfmt |= VI6_WPF_OUTFMT_PXA;
if (fmtinfo->swap_yc)
outfmt |= VI6_WPF_OUTFMT_SPYCS;
if (fmtinfo->swap_uv)
outfmt |= VI6_WPF_OUTFMT_SPUVS;
/* Destination stride and byte swapping. */
vsp1_wpf_write(wpf, dl, VI6_WPF_DSTM_STRIDE_Y,
format->plane_fmt[0].bytesperline);
if (format->num_planes > 1)
vsp1_wpf_write(wpf, dl, VI6_WPF_DSTM_STRIDE_C,
format->plane_fmt[1].bytesperline);
vsp1_wpf_write(wpf, dl, VI6_WPF_DSWAP, fmtinfo->swap);
if (vsp1->info->features & VSP1_HAS_WPF_HFLIP &&
wpf->entity.index == 0)
vsp1_wpf_write(wpf, dl, VI6_WPF_ROT_CTRL,
VI6_WPF_ROT_CTRL_LN16 |
(256 << VI6_WPF_ROT_CTRL_LMEM_WD_SHIFT));
}
if (sink_format->code != source_format->code)
outfmt |= VI6_WPF_OUTFMT_CSC;
wpf->outfmt = outfmt;
vsp1_dl_list_write(dl, VI6_DPR_WPF_FPORCH(wpf->entity.index),
VI6_DPR_WPF_FPORCH_FP_WPFN);
vsp1_dl_list_write(dl, VI6_WPF_WRBCK_CTRL, 0);
/* Sources. If the pipeline has a single input and BRU is not used,
* configure it as the master layer. Otherwise configure all
* inputs as sub-layers and select the virtual RPF as the master
* layer.
*/
for (i = 0; i < vsp1->info->rpf_count; ++i) {
struct vsp1_rwpf *input = pipe->inputs[i];
if (!input)
continue;
srcrpf |= (!pipe->bru && pipe->num_inputs == 1)
? VI6_WPF_SRCRPF_RPF_ACT_MST(input->entity.index)
: VI6_WPF_SRCRPF_RPF_ACT_SUB(input->entity.index);
}
if (pipe->bru || pipe->num_inputs > 1)
srcrpf |= VI6_WPF_SRCRPF_VIRACT_MST;
vsp1_wpf_write(wpf, dl, VI6_WPF_SRCRPF, srcrpf);
/* Enable interrupts */
vsp1_dl_list_write(dl, VI6_WPF_IRQ_STA(wpf->entity.index), 0);
vsp1_dl_list_write(dl, VI6_WPF_IRQ_ENB(wpf->entity.index),
VI6_WFP_IRQ_ENB_DFEE);
}
