static int initializePad(int port, int slot)
{
int ret;
int modes;
int i;
waitPadReady(port, slot);
modes = padInfoMode(port, slot, PAD_MODETABLE, -1);
if (modes > 0) {
for (i = 0; i < modes; i++) {
}
}
if (modes == 0) {
return 1;
}
i = 0;
do {
if (padInfoMode(port, slot, PAD_MODETABLE, i) == PAD_TYPE_DUALSHOCK)
break;
i++;
} while (i < modes);
if (i >= modes) {
return 1;
}
ret = padInfoMode(port, slot, PAD_MODECUREXID, 0);
if (ret == 0) {
return 1;
}
padSetMainMode(port, slot, PAD_MMODE_DUALSHOCK, PAD_MMODE_LOCK);
waitPadReady(port, slot);
padInfoPressMode(port, slot);
waitPadReady(port, slot);
padEnterPressMode(port, slot);
waitPadReady(port, slot);
actuators = padInfoAct(port, slot, -1, 0);
if (actuators != 0) {
actAlign[0] = 0;
actAlign[1] = 1;
actAlign[2] = 0xff;
actAlign[3] = 0xff;
actAlign[4] = 0xff;
actAlign[5] = 0xff;
waitPadReady(port, slot);
padSetActAlign(port, slot, actAlign);
}
else {
//printf("Did not find any actuators.\n");
}
return 1;
}
/** Tries to start a single pad.
* @param pad The pad data holding structure
* @return 0 Error, != 0 Ok */
static int startPad(struct pad_data_t* pad) {
if(padPortOpen(pad->port, pad->slot, pad->padBuf) == 0) {
return 0;
}
if(!initializePad(pad)) {
return 0;
}
waitPadReady(pad);
return 1;
}
static int initializePad(struct pad_data_t* pad) {
int tmp;
int modes;
int i;
// is there any device connected to that port?
if (waitPadReady(pad) == PAD_STATE_DISCONN) {
return 1; // nope, don't waste your time here!
}
// How many different modes can this device operate in?
// i.e. get # entrys in the modetable
modes = padInfoMode(pad->port, pad->slot, PAD_MODETABLE, -1);
LOG("PAD: The device has %d modes\n", modes);
if (modes > 0) {
LOG("( ");
for (i = 0; i < modes; i++) {
tmp = padInfoMode(pad->port, pad->slot, PAD_MODETABLE, i);
LOG("%d ", tmp);
}
LOG(")");
}
tmp = padInfoMode(pad->port, pad->slot, PAD_MODECURID, 0);
LOG("PAD: It is currently using mode %d\n", tmp);
// If modes == 0, this is not a Dual shock controller
// (it has no actuator engines)
if (modes == 0) {
LOG("PAD: This is a digital controller?\n");
return 1;
}
// Verify that the controller has a DUAL SHOCK mode
i = 0;
do {
if (padInfoMode(pad->port, pad->slot, PAD_MODETABLE, i) == PAD_TYPE_DUALSHOCK)
break;
i++;
} while (i < modes);
if (i >= modes) {
LOG("PAD: This is no Dual Shock controller\n");
return 1;
}
// If ExId != 0x0 => This controller has actuator engines
// This check should always pass if the Dual Shock test above passed
tmp = padInfoMode(pad->port, pad->slot, PAD_MODECUREXID, 0);
if (tmp == 0) {
LOG("PAD: This is no Dual Shock controller??\n");
return 1;
}
LOG("PAD: Enabling dual shock functions\n");
// When using MMODE_LOCK, user cant change mode with Select button
padSetMainMode(pad->port, pad->slot, PAD_MMODE_DUALSHOCK, PAD_MMODE_LOCK);
waitPadReady(pad);
tmp = padInfoPressMode(pad->port, pad->slot);
LOG("PAD: infoPressMode: %d\n", tmp);
waitPadReady(pad);
tmp = padEnterPressMode(pad->port, pad->slot);
LOG("PAD: enterPressMode: %d\n", tmp);
waitPadReady(pad);
pad->actuators = padInfoAct(pad->port, pad->slot, -1, 0);
LOG("PAD: # of actuators: %d\n", pad->actuators);
if (pad->actuators != 0) {
pad->actAlign[0] = 0; // Enable small engine
pad->actAlign[1] = 1; // Enable big engine
pad->actAlign[2] = 0xff;
pad->actAlign[3] = 0xff;
pad->actAlign[4] = 0xff;
pad->actAlign[5] = 0xff;
waitPadReady(pad);
tmp = padSetActAlign(pad->port, pad->slot, pad->actAlign);
LOG("PAD: padSetActAlign: %d\n", tmp);
} else {
LOG("PAD: Did not find any actuators.\n");
}
waitPadReady(pad);
return 1;
}