void win_otaset_turn_frntend(void)
{
UINT8 back_saved;
S_NODE s_node;
T_NODE t_node;
win_otaset_get_FreqSymbPid_display();
cur_tuner_idx = OTA_TUNER_IDX;
#ifdef _BUILD_OTA_E_
MEMCPY(&s_node, &m_ota_cfg.s_node, sizeof(s_node));
#else
get_tuner_sat(OTA_TUNER_IDX, ota_satpos, &s_node);
MEMCPY(&m_ota_cfg.s_node, &s_node, sizeof(s_node));
t_node.frq = ota_freq;
t_node.sym = ota_symb;
t_node.pol = ota_pol;
MEMCPY(&m_ota_cfg.t_node, &t_node, sizeof(t_node));
#endif
#ifndef NEW_DEMO_FRAME
struct xpond_antenna_info xai;
sat2antenna_ext(&s_node, &xai.antenna,OTA_TUNER_IDX);
xai.xpond.frq = ota_freq;
xai.xpond.sym = ota_symb;
xai.xpond.pol = ota_pol;
UIChChgSetAntennaXpond(&xai);
#else
struct ft_antenna antenna;
union ft_xpond xponder;
struct nim_device *nim = NULL;
#ifdef SUPPORT_SELECT_SAME_SAT
cur_tuner_idx =s_node.reserve_1; //s_node.tuner1_valid ? 0 : 1;
#else
cur_tuner_idx = s_node.tuner1_valid ? 0 : 1;
#endif
MEMSET(&antenna, 0, sizeof(struct ft_antenna));
MEMSET(&xponder, 0, sizeof(union ft_xpond));
sat2antenna(&s_node, &antenna);
xponder.s_info.type = FRONTEND_TYPE_S;
xponder.s_info.frq = ota_freq;
xponder.s_info.sym = ota_symb;
xponder.s_info.pol = ota_pol;
#ifdef SUPPORT_SELECT_SAME_SAT
nim = (struct nim_device *)dev_get_by_id(HLD_DEV_TYPE_NIM, ((s_node.reserve_1 == 0)? 0 : ((s_node.reserve_1 == 1) ? 1 : 0)));
#else
nim = (struct nim_device *)dev_get_by_id(HLD_DEV_TYPE_NIM, (s_node.tuner1_valid ? 0 : (s_node.tuner2_valid ? 1 : 0)));
#endif
frontend_tuning(nim, &antenna, &xponder, 1);
if(0 == cur_tuner_idx) //TUNER1 <--> TSI_TS_A <--> DMX0
{
tsi_dmx_src_select(TSI_DMX_0,TSI_TS_A);
tsi_select(TSI_TS_A,TSI_SPI_0);
}
else//TUNER2 <--> TSI_TS_B <--> DMX0
{
tsi_dmx_src_select(TSI_DMX_0,TSI_TS_B);
tsi_select(TSI_TS_B, TSI_SPI_1);
}
#endif
wincom_dish_move_popup_open(ota_presat_id,s_node.sat_id,cur_tuner_idx,&back_saved);
ota_presat_id = s_node.sat_id;
static PRESULT tplst_callback(POBJECT_HEAD pObj, VEVENT event, UINT32 param1, UINT32 param2)
{
PRESULT ret = PROC_PASS;
UINT8 back_saved;
S_NODE s_node;
POBJECT_HEAD submenu;
switch(event)
{
case EVN_PRE_OPEN:
if(sys_data_get_cur_satidx() == (UINT16)(~0))
cur_tp_sat_idx = win_load_default_satidx();
else
cur_tp_sat_idx = sys_data_get_cur_satidx();
tp_list_pos = 0xffff;
tp_list_top = 0;
win_tplist_load_sat(FALSE);
pre_tp_sat_idx= cur_tp_sat_idx;
wincom_close_help();
wincom_open_subtitle(pObj,RS_TP_LIST,0);
break;
case EVN_POST_OPEN:
//win_signal_open(pObj);
//win_signal_open_tplist(pObj);
win_signal_open_ex(pObj,pObj->frame.uLeft+30,pObj->frame.uTop + LIST_ITEMCNT*(ITEM_H + ITEM_GAP) + LST_SAT_H +25);
wincom_open_commen_help(pObj);
wincom_open_help(pObj,tplist_helpinfo , HELP_CNT);
win_tplist_tuner_frontend();
win_signal_refresh();
//win_signal_update();
get_tuner_sat(TUNER_EITHER, cur_tp_sat_idx, &s_node);
if(!tpscan_return)
wincom_dish_move_popup_open(0xFFFF,s_node.sat_id,cur_tuner_idx,&back_saved);
break;
case EVN_PRE_CLOSE:
/* Make OSD not flickering */
*((UINT32*)param2) &= ~C_CLOSE_CLRBACK_FLG;
break;
case EVN_POST_CLOSE:
if(win_tplist_check_change())
update_data();
api_stop_timer(&tpturn_timer_id);
win_signal_close();
wincom_close_help();
sys_data_check_channel_groups();
sys_data_set_cur_satidx((UINT16)cur_tp_sat_idx);
#ifdef MULTIFEED_SUPPORT
multifeed_del_invalid_info();
#endif
wincom_close_subtitle();
OSD_ClearScreen();
win_open_submenu_title(submenu,sub_menu_desc->title_id, 0); //guop
break;
case EVN_MSG_GOT:
win_tplist_message_proc(param1,param2);
break;
default:
break;
}
return ret;
}
static PRESULT motorset_item_sel_callback(POBJECT_HEAD pObj, VEVENT event, UINT32 param1, UINT32 param2)
{
PRESULT ret = PROC_PASS;
VACTION unact;
UINT32 sel;
UINT16* Uni_str;
UINT8 bID;
COM_POP_LIST_TYPE_T list_type;
OSD_RECT rect;
COM_POP_LIST_PARAM_T param;
S_NODE s_node;
UINT16 cur_idx;
UINT8 back_saved;
bID = OSD_GetObjID(pObj);
switch(event)
{
case EVN_REQUEST_STRING:
sel = param1;
Uni_str= (UINT16*)param2;
if(bID == SAT_ID)
get_tuner_sat_name(antset_cur_tuner,sel,Uni_str);
else //TP_ID
{
get_tuner_sat(antset_cur_tuner,SAT_IDX,&s_node);
get_tp_name(s_node.sat_id,sel,Uni_str);
}
break;
case EVN_POST_CHANGE:
sel = param1;
SAT_TP_CHANGED:
/* Need to turn SAT/TP here*/
if(bID == SAT_ID)
{
win_motorset_load_sat(SAT_IDX,TRUE);
win_motorset_set_frontend();
get_tuner_sat(antset_cur_tuner,SAT_IDX,&s_node);
wincom_dish_move_popup_open(0xFFFF,s_node.sat_id,antset_cur_tuner,&back_saved);
}
else
{
win_motorset_turn_tp();
}
break;
case EVN_UNKNOWN_ACTION:
unact = (VACTION)(param1>>16);
if(unact == VACT_ENTER)
{
param.selecttype = POP_LIST_SINGLESELECT;
OSD_SetRect2(&rect,&pObj->frame);
rect.uLeft -= 40;
rect.uWidth += 40;
if(bID == SAT_ID)
{
list_type = POP_LIST_TYPE_SAT;
list_type = POP_LIST_TYPE_SAT;
rect.uHeight = 300;
param.id = antset_cur_tuner;
param.cur = SAT_IDX;
}
else// if(bID == TP_ID)
{
list_type = POP_LIST_TYPE_TP;
list_type = POP_LIST_TYPE_TP;
rect.uHeight = 300;
get_tuner_sat(antset_cur_tuner,SAT_IDX,&s_node);
param.id = s_node.sat_id;
param.cur = TP_IDX;
}
cur_idx = win_com_open_sub_list(list_type,&rect,¶m);
if(cur_idx == LIST_INVALID_SEL_IDX || cur_idx == param.cur)
break;
if(bID == SAT_ID)
SAT_IDX = cur_idx;
else
TP_IDX = cur_idx;
OSD_TrackObject(pObj, C_DRAW_SIGN_EVN_FLG | C_UPDATE_ALL);
sel = cur_idx;
goto SAT_TP_CHANGED;
}
break;
}
return ret;
}
static void win_tplist_tuner_frontend(void)
{
S_NODE s_node;
T_NODE t_node;
#ifdef NEW_DEMO_FRAME
struct ft_antenna antenna;
union ft_xpond xpond_info;
struct nim_device *nim = NULL;
#else
struct cc_antenna_info antenna;
struct cc_xpond_info xpond_info;
#endif
OBJLIST* ol;
UINT32 tp_idx;
UINT16 pre_sat_id,cur_sat_id;
UINT8 back_saved;
BOOL old_get_key;
nim_io_control(g_nim_dev, NIM_DRIVER_STOP_CHANSCAN, 0);
ap_set_key_notify_proc(win_tplist_key_notify_proc);
old_get_key = ap_enable_key_task_get_key(TRUE);
win_signal_set_level_quality(0, 0, 0);
win_signal_update();
OSD_UpdateVscr(OSD_GetTaskVscr(osal_task_get_current_id()));
ol = &tplst_olist;
tp_idx = OSD_GetObjListCurPoint(ol);
get_tuner_sat(TUNER_EITHER, cur_tp_sat_idx,&s_node);
get_tp_at(s_node.sat_id,tp_idx,&t_node);
#ifdef SUPPORT_TWO_TUNER
#ifdef SUPPORT_SELECT_SAME_SAT
cur_tuner_idx = s_node.reserve_1; //antset_cur_tuner;//s_node.tuner1_valid? 0 : 1;
#else
cur_tuner_idx = s_node.tuner1_valid? 0 : 1;
#endif
#endif
#ifndef NEW_DEMO_FRAME
struct cc_antenna_info antenna;
struct cc_xpond_info xpond_info;
sat2antenna_ext(&s_node, &antenna,cur_tuner_idx);
xpond_info.frq = t_node.frq;
xpond_info.sym = t_node.sym;
xpond_info.pol = t_node.pol;
set_antenna(&antenna);
set_xpond(&xpond_info);
#else
MEMSET(&antenna, 0, sizeof(struct ft_antenna));
MEMSET(&xpond_info, 0, sizeof(union ft_xpond));
sat2antenna(&s_node, &antenna);
xpond_info.s_info.type = FRONTEND_TYPE_S;
xpond_info.s_info.frq = t_node.frq;
xpond_info.s_info.sym = t_node.sym;
xpond_info.s_info.pol = t_node.pol;
xpond_info.s_info.tp_id = t_node.tp_id;
#ifdef SUPPORT_SELECT_SAME_SAT
nim = (struct nim_device *)dev_get_by_id(HLD_DEV_TYPE_NIM, ((s_node.reserve_1 == 0)? 0 : ((s_node.reserve_1 == 1) ? 1 : 0)));
#else
nim = (struct nim_device *)dev_get_by_id(HLD_DEV_TYPE_NIM, (s_node.tuner1_valid ? 0 : (s_node.tuner2_valid ? 1 : 0)));
#endif
frontend_tuning(nim, &antenna, &xpond_info, 1);
#endif
if(pre_tp_sat_idx != cur_tp_sat_idx)
{
get_tuner_sat(TUNER_EITHER, pre_tp_sat_idx, &s_node);
pre_sat_id = s_node.sat_id;
get_tuner_sat(TUNER_EITHER, cur_tp_sat_idx, &s_node);
cur_sat_id = s_node.sat_id;
wincom_dish_move_popup_open(/*pre_sat_id*/0xFFFF,cur_sat_id,cur_tuner_idx,&back_saved);
pre_tp_sat_idx = cur_tp_sat_idx;
}
ap_enable_key_task_get_key(old_get_key);
ap_set_key_notify_proc(NULL);
nim_io_control(g_nim_dev, NIM_DRIVER_STOP_CHANSCAN, 0);
}
static PRESULT motorset_callback(POBJECT_HEAD pObj, VEVENT event, UINT32 param1, UINT32 param2)
{
PRESULT ret = PROC_PASS;
S_NODE s_node;
UINT8 back_saved;
UINT16 title_strid;
POBJECT_HEAD sat_item = (POBJECT_HEAD)&motorset_item1;
POBJECT_HEAD tp_item = (POBJECT_HEAD)&motorset_item2;
SYSTEM_DATA* sys_data;
sys_data = sys_data_get();
get_tuner_sat(antset_cur_tuner,SAT_IDX,&s_node);
switch(event)
{
case EVN_PRE_OPEN:
tone_voice_init = 0;
diskmotor_move_state = 0;
diskmove_timer_id = OSAL_INVALID_ID;
SAT_CNT = get_tuner_sat_cnt(antset_cur_tuner);
SAT_IDX = 0;
win_motorset_load_sat(SAT_IDX,FALSE);
if(sys_data->tuner_lnb_type[antset_cur_tuner] != LNB_MOTOR)
return PROC_LEAVE;
if(sys_data->tuner_lnb_antenna[antset_cur_tuner].motor_type == LNB_MOTOR_DISEQC12)
{
title_strid = RS_MOTOR_SETTING;
sat_item->bUpID = RECACULATE_ID;
tp_item->bDownID = POS_ID;
tp_item->pNext = (POBJECT_HEAD)&motorset_item3;
}
else
{
title_strid = RS_MOTOR_SETTING;
sat_item->bUpID = POS_ID;
tp_item->bDownID = SAT_ID;
tp_item->pNext = NULL;
}
OSD_SetContainerFocus(&g_win_motorset, SAT_ID);
wincom_open_title(pObj,title_strid,0);
break;
case EVN_POST_OPEN:
win_motorset_set_frontend();
//win_signal_open(pObj);
win_signal_open_ex(pObj,pObj->frame.uLeft + 4,pObj->frame.uTop+pObj->frame.uHeight - 140);
win_signal_refresh();
//win_signal_update();
get_tuner_sat(antset_cur_tuner,SAT_IDX,&s_node);
wincom_dish_move_popup_open(0xFFFF,s_node.sat_id,antset_cur_tuner,&back_saved);
break;
case EVN_PRE_CLOSE:
/* Make OSD not flickering */
*((UINT32*)param2) &= ~C_CLOSE_CLRBACK_FLG;
break;
case EVN_POST_CLOSE:
win_signal_close();
#ifdef ANTENNA_INSTALL_BEEP
if(sys_data->install_beep)
{
#if(defined(DVBT_BEE_TONE) && ANTENNA_INSTALL_BEEP == 1)
api_audio_stop_tonevoice();
#elif (defined(AUDIO_SPECIAL_EFFECT) && ANTENNA_INSTALL_BEEP == 2)
api_audio_beep_stop();
#endif
}
#endif
break;
case EVN_POST_DRAW:
if(tp_item->pNext != NULL)
win_motorset_draw_info(diskmotor_move_state);
break;
case EVN_MSG_GOT:
ret = win_motorset_message_proc(param1,param2);
break;
}
return ret;
}
