static ssize_t ieee80211_if_parse_tsf(
struct ieee80211_sub_if_data *sdata, const char *buf, int buflen)
{
struct ieee80211_local *local = sdata->local;
unsigned long long tsf;
int ret;
if (strncmp(buf, "reset", 5) == 0) {
if (local->ops->reset_tsf) {
drv_reset_tsf(local, sdata);
wiphy_info(local->hw.wiphy, "debugfs reset TSF\n");
}
} else {
ret = strict_strtoull(buf, 10, &tsf);
if (ret < 0)
return -EINVAL;
if (local->ops->set_tsf) {
drv_set_tsf(local, sdata, tsf);
wiphy_info(local->hw.wiphy,
"debugfs set TSF to %#018llx\n", tsf);
}
}
return buflen;
}
static ssize_t tsf_write(struct file *file,
const char __user *user_buf,
size_t count, loff_t *ppos)
{
struct ieee80211_local *local = file->private_data;
unsigned long long tsf;
char buf[100];
size_t len;
len = min(count, sizeof(buf) - 1);
if (copy_from_user(buf, user_buf, len))
return -EFAULT;
buf[len] = '\0';
if (strncmp(buf, "reset", 5) == 0) {
if (local->ops->reset_tsf) {
drv_reset_tsf(local);
wiphy_info(local->hw.wiphy, "debugfs reset TSF\n");
}
} else {
tsf = simple_strtoul(buf, NULL, 0);
if (local->ops->set_tsf) {
drv_set_tsf(local, tsf);
wiphy_info(local->hw.wiphy,
"debugfs set TSF to %#018llx\n", tsf);
}
}
return count;
}
static void carl9170_dbg_message(struct ar9170 *ar, const char *buf, u32 len)
{
bool restart = false;
enum carl9170_restart_reasons reason = CARL9170_RR_NO_REASON;
if (len > 3) {
if (memcmp(buf, CARL9170_ERR_MAGIC, 3) == 0) {
ar->fw.err_counter++;
if (ar->fw.err_counter > 3) {
restart = true;
reason = CARL9170_RR_TOO_MANY_FIRMWARE_ERRORS;
}
}
if (memcmp(buf, CARL9170_BUG_MAGIC, 3) == 0) {
ar->fw.bug_counter++;
restart = true;
reason = CARL9170_RR_FATAL_FIRMWARE_ERROR;
}
}
wiphy_info(ar->hw->wiphy, "FW: %.*s\n", len, buf);
if (restart)
carl9170_restart(ar, reason);
}
static void mwl_tx_ring_cleanup(struct mwl_priv *priv)
{
int cleaned_tx_desc = 0;
int num, i;
struct mwl_desc_data *desc;
for (num = 0; num < SYSADPT_NUM_OF_DESC_DATA; num++) {
skb_queue_purge(&priv->txq[num]);
priv->fw_desc_cnt[num] = 0;
desc = &priv->desc_data[num];
if (desc->ptx_ring) {
for (i = 0; i < SYSADPT_MAX_NUM_TX_DESC; i++) {
if (!desc->tx_hndl[i].psk_buff)
continue;
wiphy_info(priv->hw->wiphy,
"unmapped and free'd %i 0x%p 0x%x\n",
i,
desc->tx_hndl[i].psk_buff->data,
le32_to_cpu(
desc->ptx_ring[i].pkt_ptr));
pci_unmap_single(priv->pdev,
le32_to_cpu(
desc->ptx_ring[i].pkt_ptr),
desc->tx_hndl[i].psk_buff->len,
PCI_DMA_TODEVICE);
dev_kfree_skb_any(desc->tx_hndl[i].psk_buff);
desc->ptx_ring[i].status =
cpu_to_le32(EAGLE_TXD_STATUS_IDLE);
desc->ptx_ring[i].pkt_ptr = 0;
desc->ptx_ring[i].pkt_len = 0;
desc->tx_hndl[i].psk_buff = NULL;
cleaned_tx_desc++;
}
}
}
wiphy_info(priv->hw->wiphy, "cleaned %i TX descr\n", cleaned_tx_desc);
}
static ssize_t ieee80211_if_parse_tsf(
struct ieee80211_sub_if_data *sdata, const char *buf, int buflen)
{
struct ieee80211_local *local = sdata->local;
unsigned long long tsf;
int ret;
int tsf_is_delta = 0;
if (strncmp(buf, "reset", 5) == 0) {
if (local->ops->reset_tsf) {
drv_reset_tsf(local, sdata);
wiphy_info(local->hw.wiphy, "debugfs reset TSF\n");
}
} else {
if (buflen > 10 && buf[1] == '=') {
if (buf[0] == '+')
tsf_is_delta = 1;
else if (buf[0] == '-')
tsf_is_delta = -1;
else
return -EINVAL;
buf += 2;
}
ret = kstrtoull(buf, 10, &tsf);
if (ret < 0)
return ret;
if (tsf_is_delta)
tsf = drv_get_tsf(local, sdata) + tsf_is_delta * tsf;
if (local->ops->set_tsf) {
drv_set_tsf(local, sdata, tsf);
wiphy_info(local->hw.wiphy,
"debugfs set TSF to %#018llx\n", tsf);
}
}
ieee80211_recalc_dtim(local, sdata);
return buflen;
}
void ieee80211_restart_hw(struct ieee80211_hw *hw)
{
struct ieee80211_local *local = hw_to_local(hw);
trace_api_restart_hw(local);
wiphy_info(hw->wiphy,
"Hardware restart was requested\n");
/* use this reason, ieee80211_reconfig will unblock it */
ieee80211_stop_queues_by_reason(hw,
IEEE80211_QUEUE_STOP_REASON_SUSPEND);
schedule_work(&local->restart_work);
}
int carl9170_echo_test(struct ar9170 *ar, const u32 v)
{
u32 echores;
int err;
err = carl9170_exec_cmd(ar, CARL9170_CMD_ECHO,
4, (u8 *)&v,
4, (u8 *)&echores);
if (err)
return err;
if (v != echores) {
wiphy_info(ar->hw->wiphy, "wrong echo %x != %x", v, echores);
return -EINVAL;
}
return 0;
}
int p54_parse_eeprom(struct ieee80211_hw *dev, void *eeprom, int len)
{
struct p54_common *priv = dev->priv;
struct eeprom_pda_wrap *wrap;
struct pda_entry *entry;
unsigned int data_len, entry_len;
void *tmp;
int err;
u8 *end = (u8 *)eeprom + len;
u16 synth = 0;
u16 crc16 = ~0;
wrap = (struct eeprom_pda_wrap *) eeprom;
entry = (void *)wrap->data + le16_to_cpu(wrap->len);
/* verify that at least the entry length/code fits */
while ((u8 *)entry <= end - sizeof(*entry)) {
entry_len = le16_to_cpu(entry->len);
data_len = ((entry_len - 1) << 1);
/* abort if entry exceeds whole structure */
if ((u8 *)entry + sizeof(*entry) + data_len > end)
break;
switch (le16_to_cpu(entry->code)) {
case PDR_MAC_ADDRESS:
if (data_len != ETH_ALEN)
break;
SET_IEEE80211_PERM_ADDR(dev, entry->data);
break;
case PDR_PRISM_PA_CAL_OUTPUT_POWER_LIMITS:
if (priv->output_limit)
break;
err = p54_convert_output_limits(dev, entry->data,
data_len);
if (err)
goto err;
break;
case PDR_PRISM_PA_CAL_CURVE_DATA: {
struct pda_pa_curve_data *curve_data =
(struct pda_pa_curve_data *)entry->data;
if (data_len < sizeof(*curve_data)) {
err = -EINVAL;
goto err;
}
switch (curve_data->cal_method_rev) {
case 0:
err = p54_convert_rev0(dev, curve_data);
break;
case 1:
err = p54_convert_rev1(dev, curve_data);
break;
default:
wiphy_err(dev->wiphy,
"unknown curve data revision %d\n",
curve_data->cal_method_rev);
err = -ENODEV;
break;
}
if (err)
goto err;
}
break;
case PDR_PRISM_ZIF_TX_IQ_CALIBRATION:
priv->iq_autocal = kmemdup(entry->data, data_len,
GFP_KERNEL);
if (!priv->iq_autocal) {
err = -ENOMEM;
goto err;
}
priv->iq_autocal_len = data_len / sizeof(struct pda_iq_autocal_entry);
break;
case PDR_DEFAULT_COUNTRY:
p54_parse_default_country(dev, entry->data, data_len);
break;
case PDR_INTERFACE_LIST:
tmp = entry->data;
while ((u8 *)tmp < entry->data + data_len) {
struct exp_if *exp_if = tmp;
if (exp_if->if_id == cpu_to_le16(IF_ID_ISL39000))
synth = le16_to_cpu(exp_if->variant);
tmp += sizeof(*exp_if);
}
break;
case PDR_HARDWARE_PLATFORM_COMPONENT_ID:
if (data_len < 2)
break;
priv->version = *(u8 *)(entry->data + 1);
break;
case PDR_RSSI_LINEAR_APPROXIMATION:
case PDR_RSSI_LINEAR_APPROXIMATION_DUAL_BAND:
case PDR_RSSI_LINEAR_APPROXIMATION_EXTENDED:
err = p54_parse_rssical(dev, entry->data, data_len,
le16_to_cpu(entry->code));
if (err)
goto err;
break;
case PDR_RSSI_LINEAR_APPROXIMATION_CUSTOMV2: {
struct pda_custom_wrapper *pda = (void *) entry->data;
__le16 *src;
u16 *dst;
int i;
if (priv->rssi_db || data_len < sizeof(*pda))
break;
priv->rssi_db = p54_convert_db(pda, data_len);
if (!priv->rssi_db)
break;
src = (void *) priv->rssi_db->data;
dst = (void *) priv->rssi_db->data;
for (i = 0; i < priv->rssi_db->entries; i++)
*(dst++) = (s16) le16_to_cpu(*(src++));
}
break;
case PDR_PRISM_PA_CAL_OUTPUT_POWER_LIMITS_CUSTOM: {
struct pda_custom_wrapper *pda = (void *) entry->data;
if (priv->output_limit || data_len < sizeof(*pda))
break;
priv->output_limit = p54_convert_db(pda, data_len);
}
break;
case PDR_PRISM_PA_CAL_CURVE_DATA_CUSTOM: {
struct pda_custom_wrapper *pda = (void *) entry->data;
if (priv->curve_data || data_len < sizeof(*pda))
break;
priv->curve_data = p54_convert_db(pda, data_len);
}
break;
case PDR_END:
crc16 = ~crc_ccitt(crc16, (u8 *) entry, sizeof(*entry));
if (crc16 != le16_to_cpup((__le16 *)entry->data)) {
wiphy_err(dev->wiphy, "eeprom failed checksum "
"test!\n");
err = -ENOMSG;
goto err;
} else {
goto good_eeprom;
}
break;
default:
break;
}
crc16 = crc_ccitt(crc16, (u8 *)entry, (entry_len + 1) * 2);
entry = (void *)entry + (entry_len + 1) * 2;
}
wiphy_err(dev->wiphy, "unexpected end of eeprom data.\n");
err = -ENODATA;
goto err;
good_eeprom:
if (!synth || !priv->iq_autocal || !priv->output_limit ||
!priv->curve_data) {
wiphy_err(dev->wiphy,
"not all required entries found in eeprom!\n");
err = -EINVAL;
goto err;
}
err = p54_generate_channel_lists(dev);
if (err)
goto err;
priv->rxhw = synth & PDR_SYNTH_FRONTEND_MASK;
if (priv->rxhw == PDR_SYNTH_FRONTEND_XBOW)
p54_init_xbow_synth(priv);
if (!(synth & PDR_SYNTH_24_GHZ_DISABLED))
dev->wiphy->bands[IEEE80211_BAND_2GHZ] =
priv->band_table[IEEE80211_BAND_2GHZ];
if (!(synth & PDR_SYNTH_5_GHZ_DISABLED))
dev->wiphy->bands[IEEE80211_BAND_5GHZ] =
priv->band_table[IEEE80211_BAND_5GHZ];
if ((synth & PDR_SYNTH_RX_DIV_MASK) == PDR_SYNTH_RX_DIV_SUPPORTED)
priv->rx_diversity_mask = 3;
if ((synth & PDR_SYNTH_TX_DIV_MASK) == PDR_SYNTH_TX_DIV_SUPPORTED)
priv->tx_diversity_mask = 3;
if (!is_valid_ether_addr(dev->wiphy->perm_addr)) {
u8 perm_addr[ETH_ALEN];
wiphy_warn(dev->wiphy,
"Invalid hwaddr! Using randomly generated MAC addr\n");
random_ether_addr(perm_addr);
SET_IEEE80211_PERM_ADDR(dev, perm_addr);
}
priv->cur_rssi = &p54_rssi_default;
wiphy_info(dev->wiphy, "hwaddr %pM, MAC:isl38%02x RF:%s\n",
dev->wiphy->perm_addr, priv->version,
p54_rf_chips[priv->rxhw]);
return 0;
err:
kfree(priv->iq_autocal);
kfree(priv->output_limit);
kfree(priv->curve_data);
kfree(priv->rssi_db);
priv->iq_autocal = NULL;
priv->output_limit = NULL;
priv->curve_data = NULL;
priv->rssi_db = NULL;
wiphy_err(dev->wiphy, "eeprom parse failed!\n");
return err;
}
static int ath_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
{
void __iomem *mem;
struct ath_softc *sc;
struct ieee80211_hw *hw;
u8 csz;
u32 val;
int ret = 0;
char hw_name[64];
if (pci_enable_device(pdev))
return -EIO;
ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
if (ret) {
printk(KERN_ERR "ath9k: 32-bit DMA not available\n");
goto err_dma;
}
ret = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
if (ret) {
printk(KERN_ERR "ath9k: 32-bit DMA consistent "
"DMA enable failed\n");
goto err_dma;
}
/*
* Cache line size is used to size and align various
* structures used to communicate with the hardware.
*/
pci_read_config_byte(pdev, PCI_CACHE_LINE_SIZE, &csz);
if (csz == 0) {
/*
* Linux 2.4.18 (at least) writes the cache line size
* register as a 16-bit wide register which is wrong.
* We must have this setup properly for rx buffer
* DMA to work so force a reasonable value here if it
* comes up zero.
*/
csz = L1_CACHE_BYTES / sizeof(u32);
pci_write_config_byte(pdev, PCI_CACHE_LINE_SIZE, csz);
}
/*
* The default setting of latency timer yields poor results,
* set it to the value used by other systems. It may be worth
* tweaking this setting more.
*/
pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0xa8);
pci_set_master(pdev);
/*
* Disable the RETRY_TIMEOUT register (0x41) to keep
* PCI Tx retries from interfering with C3 CPU state.
*/
pci_read_config_dword(pdev, 0x40, &val);
if ((val & 0x0000ff00) != 0)
pci_write_config_dword(pdev, 0x40, val & 0xffff00ff);
ret = pci_request_region(pdev, 0, "ath9k");
if (ret) {
dev_err(&pdev->dev, "PCI memory region reserve error\n");
ret = -ENODEV;
goto err_region;
}
mem = pci_iomap(pdev, 0, 0);
if (!mem) {
printk(KERN_ERR "PCI memory map error\n") ;
ret = -EIO;
goto err_iomap;
}
hw = ieee80211_alloc_hw(sizeof(struct ath_softc), &ath9k_ops);
if (!hw) {
dev_err(&pdev->dev, "No memory for ieee80211_hw\n");
ret = -ENOMEM;
goto err_alloc_hw;
}
SET_IEEE80211_DEV(hw, &pdev->dev);
pci_set_drvdata(pdev, hw);
sc = hw->priv;
sc->hw = hw;
sc->dev = &pdev->dev;
sc->mem = mem;
/* Will be cleared in ath9k_start() */
sc->sc_flags |= SC_OP_INVALID;
ret = request_irq(pdev->irq, ath_isr, IRQF_SHARED, "ath9k", sc);
if (ret) {
dev_err(&pdev->dev, "request_irq failed\n");
goto err_irq;
}
sc->irq = pdev->irq;
ret = ath9k_init_device(id->device, sc, &ath_pci_bus_ops);
if (ret) {
dev_err(&pdev->dev, "Failed to initialize device\n");
goto err_init;
}
ath9k_hw_name(sc->sc_ah, hw_name, sizeof(hw_name));
wiphy_info(hw->wiphy, "%s mem=0x%lx, irq=%d\n",
hw_name, (unsigned long)mem, pdev->irq);
return 0;
err_init:
free_irq(sc->irq, sc);
err_irq:
ieee80211_free_hw(hw);
err_alloc_hw:
pci_iounmap(pdev, mem);
err_iomap:
pci_release_region(pdev, 0);
err_region:
/* Nothing */
err_dma:
pci_disable_device(pdev);
return ret;
}
void carl9170_handle_command_response(struct ar9170 *ar, void *buf, u32 len)
{
struct carl9170_rsp *cmd = (void *) buf;
struct ieee80211_vif *vif;
if (carl9170_check_sequence(ar, cmd->hdr.seq))
return;
if ((cmd->hdr.cmd & CARL9170_RSP_FLAG) != CARL9170_RSP_FLAG) {
if (!(cmd->hdr.cmd & CARL9170_CMD_ASYNC_FLAG))
carl9170_cmd_callback(ar, len, buf);
return;
}
if (unlikely(cmd->hdr.len != (len - 4))) {
if (net_ratelimit()) {
wiphy_err(ar->hw->wiphy, "FW: received over-/under"
"sized event %x (%d, but should be %d).\n",
cmd->hdr.cmd, cmd->hdr.len, len - 4);
print_hex_dump_bytes("dump:", DUMP_PREFIX_NONE,
buf, len);
}
return;
}
/* hardware event handlers */
switch (cmd->hdr.cmd) {
case CARL9170_RSP_PRETBTT:
/* pre-TBTT event */
rcu_read_lock();
vif = carl9170_get_main_vif(ar);
if (!vif) {
rcu_read_unlock();
break;
}
switch (vif->type) {
case NL80211_IFTYPE_STATION:
carl9170_handle_ps(ar, cmd);
break;
case NL80211_IFTYPE_AP:
case NL80211_IFTYPE_ADHOC:
carl9170_update_beacon(ar, true);
break;
default:
break;
}
rcu_read_unlock();
break;
case CARL9170_RSP_TXCOMP:
/* TX status notification */
carl9170_tx_process_status(ar, cmd);
break;
case CARL9170_RSP_BEACON_CONFIG:
/*
* (IBSS) beacon send notification
* bytes: 04 c2 XX YY B4 B3 B2 B1
*
* XX always 80
* YY always 00
* B1-B4 "should" be the number of send out beacons.
*/
break;
case CARL9170_RSP_ATIM:
/* End of Atim Window */
break;
case CARL9170_RSP_WATCHDOG:
/* Watchdog Interrupt */
carl9170_restart(ar, CARL9170_RR_WATCHDOG);
break;
case CARL9170_RSP_TEXT:
/* firmware debug */
carl9170_dbg_message(ar, (char *)buf + 4, len - 4);
break;
case CARL9170_RSP_HEXDUMP:
wiphy_dbg(ar->hw->wiphy, "FW: HD %d\n", len - 4);
print_hex_dump_bytes("FW:", DUMP_PREFIX_NONE,
(char *)buf + 4, len - 4);
break;
case CARL9170_RSP_RADAR:
if (!net_ratelimit())
break;
wiphy_info(ar->hw->wiphy, "FW: RADAR! Please report this "
"incident to [email protected] !\n");
break;
case CARL9170_RSP_GPIO:
#ifdef CONFIG_CARL9170_WPC
if (ar->wps.pbc) {
bool state = !!(cmd->gpio.gpio & cpu_to_le32(
AR9170_GPIO_PORT_WPS_BUTTON_PRESSED));
if (state != ar->wps.pbc_state) {
ar->wps.pbc_state = state;
input_report_key(ar->wps.pbc, KEY_WPS_BUTTON,
state);
input_sync(ar->wps.pbc);
}
}
#endif /* CONFIG_CARL9170_WPC */
break;
case CARL9170_RSP_BOOT:
complete(&ar->fw_boot_wait);
break;
default:
wiphy_err(ar->hw->wiphy, "FW: received unhandled event %x\n",
cmd->hdr.cmd);
print_hex_dump_bytes("dump:", DUMP_PREFIX_NONE, buf, len);
break;
}
}
int mwl_fwdl_download_firmware(struct ieee80211_hw *hw)
{
struct mwl_priv *priv = hw->priv;
const struct firmware *fw;
u32 curr_iteration = 0;
u32 size_fw_downloaded = 0;
u32 int_code = 0;
u32 len = 0;
fw = priv->fw_ucode;
mwl_fwcmd_reset(hw);
/* FW before jumping to boot rom, it will enable PCIe transaction retry,
* wait for boot code to stop it.
*/
mdelay(FW_CHECK_MSECS);
writel(MACREG_A2HRIC_BIT_MASK,
priv->iobase1 + MACREG_REG_A2H_INTERRUPT_CLEAR_SEL);
writel(0x00, priv->iobase1 + MACREG_REG_A2H_INTERRUPT_CAUSE);
writel(0x00, priv->iobase1 + MACREG_REG_A2H_INTERRUPT_MASK);
writel(MACREG_A2HRIC_BIT_MASK,
priv->iobase1 + MACREG_REG_A2H_INTERRUPT_STATUS_MASK);
/* this routine interacts with SC2 bootrom to download firmware binary
* to the device. After DMA'd to SC2, the firmware could be deflated to
* reside on its respective blocks such as ITCM, DTCM, SQRAM,
* (or even DDR, AFTER DDR is init'd before fw download
*/
wiphy_info(hw->wiphy, "fw download start 88\n");
/* Disable PFU before FWDL */
writel(0x100, priv->iobase1 + 0xE0E4);
/* make sure SCRATCH2 C40 is clear, in case we are too quick */
while (readl(priv->iobase1 + 0xc40) == 0)
;
while (size_fw_downloaded < fw->size) {
len = readl(priv->iobase1 + 0xc40);
if (!len)
break;
/* this copies the next chunk of fw binary to be delivered */
memcpy((char *)&priv->pcmd_buf[0],
(fw->data + size_fw_downloaded), len);
/* this function writes pdata to c10, then write 2 to c18 */
mwl_fwdl_trig_pcicmd_bootcode(priv);
/* this is arbitrary per your platform; we use 0xffff */
curr_iteration = FW_MAX_NUM_CHECKS;
/* NOTE: the following back to back checks on C1C is time
* sensitive, hence may need to be tweaked dependent on host
* processor. Time for SC2 to go from the write of event 2 to
* C1C == 2 is ~1300 nSec. Hence the checkings on host has to
* consider how efficient your code can be to meet this timing,
* or you can alternatively tweak this routines to fit your
* platform
*/
do {
int_code = readl(priv->iobase1 + 0xc1c);
if (int_code != 0)
break;
curr_iteration--;
} while (curr_iteration);
do {
int_code = readl(priv->iobase1 + 0xc1c);
if ((int_code & MACREG_H2ARIC_BIT_DOOR_BELL) !=
MACREG_H2ARIC_BIT_DOOR_BELL)
break;
curr_iteration--;
} while (curr_iteration);
if (curr_iteration == 0) {
/* This limited loop check allows you to exit gracefully
* without locking up your entire system just because fw
* download failed
*/
wiphy_err(hw->wiphy,
"Exhausted curr_iteration for fw download\n");
goto err_download;
}
size_fw_downloaded += len;
}
wiphy_info(hw->wiphy,
"FwSize = %d downloaded Size = %d curr_iteration %d\n",
(int)fw->size, size_fw_downloaded, curr_iteration);
/* Now firware is downloaded successfully, so this part is to check
* whether fw can properly execute to an extent that write back
* signature to indicate its readiness to the host. NOTE: if your
* downloaded fw crashes, this signature checking will fail. This
* part is similar as SC1
*/
*((u32 *)&priv->pcmd_buf[1]) = 0;
mwl_fwdl_trig_pcicmd(priv);
curr_iteration = FW_MAX_NUM_CHECKS;
do {
curr_iteration--;
writel(HOSTCMD_SOFTAP_MODE, priv->iobase1 + MACREG_REG_GEN_PTR);
mdelay(FW_CHECK_MSECS);
int_code = readl(priv->iobase1 + MACREG_REG_INT_CODE);
if (!(curr_iteration % 0xff))
wiphy_err(hw->wiphy, "%x;", int_code);
} while ((curr_iteration) &&
(int_code != HOSTCMD_SOFTAP_FWRDY_SIGNATURE));
if (curr_iteration == 0) {
wiphy_err(hw->wiphy,
"Exhausted curr_iteration for fw signature\n");
goto err_download;
}
wiphy_info(hw->wiphy, "complete\n");
writel(0x00, priv->iobase1 + MACREG_REG_INT_CODE);
return 0;
err_download:
mwl_fwcmd_reset(hw);
return -EIO;
}
