bool GERBVIEW_FRAME::OpenProjectFiles( const std::vector<wxString>& aFileSet, int aCtl )
{
// The current project path is also a valid command parameter. Check if a single path
// rather than a file name was passed to GerbView and use it as the initial MRU path.
if( aFileSet.size() > 0 )
{
wxString path = aFileSet[0];
// For some reason wxApp appears to leave the trailing double quote on quoted
// parameters which are required for paths with spaces. Maybe this should be
// pushed back into PGM_SINGLE_TOP::OnPgmInit() but that may cause other issues.
// We can't buy a break!
if( path.Last() == wxChar( '\"' ) )
path.RemoveLast();
if( !wxFileExists( path ) && wxDirExists( path ) )
{
wxLogDebug( wxT( "MRU path: %s." ), GetChars( path ) );
m_mruPath = path;
return true;
}
const unsigned limit = std::min( unsigned( aFileSet.size() ),
unsigned( GERBER_DRAWLAYERS_COUNT ) );
int layer = 0;
for( unsigned i=0; i<limit; ++i, ++layer )
{
setActiveLayer( layer );
// Try to guess the type of file by its ext
// if it is .drl (Kicad files), it is a drill file
wxFileName fn( aFileSet[i] );
wxString ext = fn.GetExt();
if( ext == "drl" )
LoadExcellonFiles( aFileSet[i] );
else
LoadGerberFiles( aFileSet[i] );
}
}
Zoom_Automatique( true ); // Zoom fit in frame
UpdateTitleAndInfo();
return true;
}
wxString FOOTPRINTS_LISTBOX::GetSelectedFootprint()
{
wxString footprintName;
int ii = GetFirstSelected();
if( ii >= 0 )
{
wxString msg = m_footprintList[ii];
msg.Trim( true );
msg.Trim( false );
footprintName = msg.AfterFirst( wxChar( ' ' ) );
}
return footprintName;
}
void MenuEditor::OnMenuRight(wxCommandEvent& )
{
int sel = GetSelectedItem();
int curIdent = GetItemIdentation(sel) + 1;
int parentIdent = sel > 0 ? GetItemIdentation(sel - 1) : -1;
if (parentIdent == -1 || abs(curIdent - parentIdent) > 1)
return;
wxString label = m_menuList->GetItemText(sel);
label.Trim(true);
label.Trim(false);
label = wxString(wxChar(' '), curIdent * IDENTATION) + label;
m_menuList->SetItemText(sel, label);
}
void MenuEditor::OnMenuLeft(wxCommandEvent& )
{
int sel = GetSelectedItem();
int curIdent = GetItemIdentation(sel) - 1;
int childIdent = sel < m_menuList->GetItemCount() - 1 ? GetItemIdentation(sel + 1) : -1;
if (curIdent < 0 || (childIdent != -1 && abs(curIdent - childIdent) > 1))
return;
wxString label = m_menuList->GetItemText(sel);
label.Trim(true);
label.Trim(false);
label = wxString(wxChar(' '), curIdent * IDENTATION) + label;
m_menuList->SetItemText(sel, label);
}
TemplateParser::Ident TemplateParser::ParseIdent()
{
Ident ident = ID_ERROR;
if (!m_in.Eof())
{
wxString macro;
m_in.GetC();
wxChar peek( m_in.Peek() );
while (peek != wxChar(EOF) && !m_in.Eof() && peek != wxT('#') && peek != wxT('$')
&& ( (peek >= wxT('a') && peek <= wxT('z') ) ||
(peek >= wxT('A') && peek <= wxT('Z') ) ||
(peek >= wxT('0') && peek <= wxT('9') ) ))
{
macro += wxChar( m_in.GetC() );
peek = wxChar( m_in.Peek() );
}
// Searching the identifier
ident = SearchIdent( macro );
}
return ident;
}
void TextCtrlTestCase::LongText()
{
// This test is only possible under MSW as in the other ports
// SetMaxLength() can't be used with multi line text controls.
#ifdef __WXMSW__
delete m_text;
CreateText(wxTE_MULTILINE|wxTE_DONTWRAP);
const int numLines = 1000;
const int lenPattern = 100;
int i;
// Pattern for the line.
wxChar linePattern[lenPattern+1];
for (i = 0; i < lenPattern - 1; i++)
{
linePattern[i] = wxChar('0' + i % 10);
}
linePattern[WXSIZEOF(linePattern) - 1] = wxChar('\0');
// Fill the control.
m_text->SetMaxLength(15000);
for (i = 0; i < numLines; i++)
{
m_text->AppendText(wxString::Format(wxT("[%3d] %s\n"), i, linePattern));
}
// Check the content.
for (i = 0; i < numLines; i++)
{
wxString pattern = wxString::Format(wxT("[%3d] %s"), i, linePattern);
wxString line = m_text->GetLineText(i);
CPPUNIT_ASSERT_EQUAL( line, pattern );
}
#endif // __WXMSW__
}
void MenuEditor::AddItem(const wxString& label, const wxString& shortcut,
const wxString& id, const wxString& name, const wxString &help, const wxString &kind)
{
int sel = GetSelectedItem();
int identation = 0;
if (sel >= 0) identation = GetItemIdentation(sel);
wxString labelAux = label;
labelAux.Trim(true);
labelAux.Trim(false);
if (sel < 0) sel = m_menuList->GetItemCount() - 1;
labelAux = wxString(wxChar(' '), identation * IDENTATION) + labelAux;
long index = InsertItem(sel + 1, labelAux, shortcut, id, name, help, kind);
m_menuList->SetItemState(index, wxLIST_STATE_SELECTED, wxLIST_STATE_SELECTED);
}
void ServerEvents::OnMutelistItem(const std::string& /*unused*/, const std::string& mutee, const std::string& description)
{
wxString message = TowxString(mutee);
wxString desc = TowxString(description);
wxString mutetime = desc.AfterFirst(wxChar(' '));
long time;
if (mutetime == _T("indefinite"))
message << _(" indefinite time remaining");
else if (mutetime.ToLong(&time))
message << wxString::Format(_(" %d minutes remaining"), time / 60 + 1);
else
message << mutetime;
if (!desc.IsEmpty())
message << _T(", ") << desc;
mutelistWindow(message);
}
SCH_COMPONENT* NETLIST_EXPORTER::findNextComponent( EDA_ITEM* aItem, SCH_SHEET_PATH* aSheetPath )
{
wxString ref;
// continue searching from the middle of a linked list (the draw list)
for( ; aItem; aItem = aItem->Next() )
{
if( aItem->Type() != SCH_COMPONENT_T )
continue;
// found next component
SCH_COMPONENT* comp = (SCH_COMPONENT*) aItem;
// Power symbols and other components which have the reference starting
// with "#" are not included in netlist (pseudo or virtual components)
ref = comp->GetRef( aSheetPath->Last() );
if( ref[0] == wxChar( '#' ) )
continue;
// if( Component->m_FlagControlMulti == 1 )
// continue; /* yes */
// removed because with multiple instances of one schematic
// (several sheets pointing to 1 screen), this will be erroneously be
// toggled.
LIB_PART* part = m_libs->FindLibPart( comp->GetPartName() );
if( !part )
continue;
// If component is a "multi parts per package" type
if( part->GetUnitCount() > 1 )
{
// test if this reference has already been processed, and if so skip
if( m_ReferencesAlreadyFound.Lookup( ref ) )
continue;
}
// record the usage of this library component entry.
m_LibParts.insert( part ); // rejects non-unique pointers
return comp;
}
return NULL;
}
void CUtils::dump(const wxChar* title, const unsigned char* data, unsigned int length)
{
wxASSERT(title != NULL);
wxASSERT(data != NULL);
wxLogMessage(wxT("%s"), title);
unsigned int offset = 0U;
while (length > 0U) {
wxString output;
unsigned int bytes = (length > 16U) ? 16U : length;
for (unsigned i = 0U; i < bytes; i++) {
wxString temp;
temp.Printf(wxT("%02X "), data[offset + i]);
output += temp;
}
for (unsigned int i = bytes; i < 16U; i++)
output += wxT(" ");
output += wxT(" *");
for (unsigned i = 0U; i < bytes; i++) {
unsigned char c = data[offset + i];
if (::isprint(c))
output += wxChar(c);
else
output += wxT('.');
}
output += wxT('*');
wxLogMessage(wxT("%04X: %s"), offset, output.c_str());
offset += 16U;
if (length >= 16U)
length -= 16U;
else
length = 0U;
}
}
const std::string wxExViMacros::Decode(const std::string& text)
{
std::string output;
for (size_t i = 0; i < text.length(); i++)
{
if (
i + 1 < text.length() &&
text[i] == '$' &&
text[i + 1] == '!')
{
int skip = 0;
wxString number;
if (
i + 3 < text.length() &&
isdigit(text[i + 2]) &&
text[i + 3] == '!')
{
skip = 3;
number = text.substr(i + 2, 1);
}
else if (
i + 4 < text.length() &&
isdigit(text[i + 2]) &&
isdigit(text[i + 3]) &&
text[i + 4] == '!')
{
skip = 4;
number = text.substr(i + 2, 2);
}
if (!number.empty())
{
output += wxChar(atoi(number));
i += skip;
}
}
else
{
output += text[i];
}
}
return output;
}
bool wxsCorrector::FixVarName(wxString& Name)
{
wxString Corrected;
Name.Trim(true);
Name.Trim(false);
if ( !Name.empty() )
{
// Validating name as C++ ideentifier
// TODO: Other languages ?
static wxString FirstChar(
_T("ABCDEFGHIJKLMNOPQRSTUVWXYZ")
_T("abcdefghijklmnopqrstuvwxyz")
_T("_"));
if ( FirstChar.Find(Name.GetChar(0)) == -1 )
Manager::Get()->GetLogManager()->DebugLog(F(_T("wxSmith: Variable name : \"%s\" is not a valid c++ identifier (invalid character \"%c\" at position %d)"),Name.wx_str(),wxChar(Name.GetChar(0)),0));
else
Corrected.Append(Name.GetChar(0));
static wxString NextChars(
_T("0123456789")
_T("ABCDEFGHIJKLMNOPQRSTUVWXYZ")
_T("abcdefghijklmnopqrstuvwxyz")
_T("_"));
for ( size_t i=1; i<Name.Length(); ++i )
{
if ( NextChars.Find(Name.GetChar(i)) == -1 )
{
Manager::Get()->GetLogManager()->DebugLog(F(_T("wxSmith: Variable name : \"%s\" is not a valid c++ identifier (invalid character \"%c\" at position %lu)"),
Name.wx_str(),
wxChar(Name.GetChar(i)),
static_cast<unsigned long>(i)));
}
else
Corrected.Append(Name.GetChar(i));
}
}
bool Diff = Name != Corrected;
Name = Corrected;
return Diff;
}
static wxString Code128PackDigits(const wxString& text, size_t& textIndex, int numDigits)
{
wxString code = wxEmptyString;
while (numDigits > 0)
{
if (text[textIndex] == CODE128_FNC1)
{
code += CODE128_FNC1_INDEX;
++textIndex;
continue;
}
numDigits -= 2;
int c1 = text[textIndex++] - wxT('0');
int c2 = text[textIndex++] - wxT('0');
code += wxChar(c1 * 10 + c2);
}
return code;
}
wxString
wxPdfFontDetails::CreateSubsetPrefix() const
{
wxString prefix = wxT("WXP");
int k;
int code = m_index;
for (k = 0; k < 3; k++)
{
#if wxCHECK_VERSION(2,9,0)
prefix += wxUniChar(wxT('A' + (code % 26)));
#else
prefix += wxChar(wxT('A' + (code % 26)));
#endif
code /= 26;
}
prefix += wxT("+");
return prefix;
}
strStream::strStream()
{
static const size_t LEN = 256;
m_str.reserve(LEN);
#if defined(__INTEL_COMPILER) && 1 /* VDM auto patch */
# pragma ivdep
# pragma swp
# pragma unroll
# pragma prefetch
# if 0
# pragma simd noassert
# endif
#endif /* VDM auto patch */
for ( size_t n = 0; n < LEN; n++ )
{
m_str += wxChar(wxT('A') + n % (wxT('Z') - wxT('A') + 1));
}
}
bool nwxString::FileNameStringOK(const wxString &s)
{
const wxString BAD("<>:\"/\\|?*'`");
size_t nLen = s.Len();
size_t i;
wxChar x;
bool bRtn = true;
for(i = 0; i < nLen; i++)
{
x = s.GetChar(i);
if( (x & 0x80) || (x < wxChar(' ')) || (BAD.find(x) != (size_t)wxNOT_FOUND) )
{
bRtn = false;
i = nLen;
}
}
return bRtn;
}
wxString
wxPdfFontDataCore::ConvertCID2GID(const wxString& s,
const wxPdfEncoding* encoding,
wxPdfSortedArrayInt* usedGlyphs,
wxPdfChar2GlyphMap* subsetGlyphs) const
{
// No conversion from cid to gid
wxUnusedVar(usedGlyphs);
wxUnusedVar(subsetGlyphs);
#if wxUSE_UNICODE
const wxPdfChar2GlyphMap* convMap = FindEncodingMap(encoding);
wxString t;
if (convMap != NULL)
{
wxPdfChar2GlyphMap::const_iterator charIter;
wxString::const_iterator ch;
for (ch = s.begin(); ch != s.end(); ++ch)
{
charIter = (*convMap).find(*ch);
if (charIter != (*convMap).end())
{
#if wxCHECK_VERSION(2,9,0)
t.Append(wxUniChar(charIter->second));
#else
t.Append(wxChar(charIter->second));
#endif
}
else
{
t += wxT("?");
}
}
}
else
{
t = s;
}
return t;
#else
// Return unchanged string in ANSI build
wxUnusedVar(encoding);
return s;
#endif
}
PlatformKeyboardEvent::PlatformKeyboardEvent(wxKeyEvent& event)
{
if (event.GetEventType() == wxEVT_KEY_UP)
m_type = PlatformEvent::KeyUp;
else if (event.GetEventType() == wxEVT_KEY_DOWN)
m_type = PlatformEvent::KeyDown;
else if (event.GetEventType() == wxEVT_CHAR)
m_type = PlatformEvent::Char;
else
ASSERT_NOT_REACHED();
if (m_type != PlatformEvent::Char)
m_keyIdentifier = keyIdentifierForWxKeyCode(event.GetKeyCode());
else {
//ENTER is an editing command processed as a char (only Enter and Tab are)
//unfortunately the unicode key for numpad_enter (370) is NOT what we want here (13)
//The unicode values for normal enter and tab are the same as the ASCII values, thus ok
//Note that I think this a wx bug, as the Character Code is actually 13 when
//numpad_enter is a CHAR event.
if (event.GetKeyCode() == 13 && event.GetUnicodeKey() == wxChar(370))
m_text = "\r";
else
m_text = wxString(event.GetUnicodeKey());
m_unmodifiedText = m_text;
}
m_autoRepeat = false; // FIXME: not correct.
m_windowsVirtualKeyCode = windowsKeyCodeForKeyEvent(event.GetKeyCode());
m_nativeVirtualKeyCode = event.GetKeyCode();
m_isKeypad = (event.GetKeyCode() >= WXK_NUMPAD_SPACE) && (event.GetKeyCode() <= WXK_NUMPAD_DIVIDE);
m_modifiers = 0;
if (event.ShiftDown())
m_modifiers |= ShiftKey;
if (event.CmdDown())
m_modifiers |= CtrlKey;
if (event.AltDown())
m_modifiers |= AltKey;
if (event.MetaDown())
m_modifiers |= MetaKey;
m_timestamp = WTF::currentTime();
}
void CUtils::dumpRev(const wxChar* title, const bool* data, unsigned int length)
{
wxASSERT(title != NULL);
wxASSERT(data != NULL);
wxLogMessage(wxT("%s"), title);
unsigned int offset = 0U;
while (offset < length) {
wxString output;
unsigned char buffer[16];
unsigned int bytes = 0U;
for (unsigned int bits = 0U; bits < 128U && (offset + bits) < length; bits += 8U)
buffer[bytes++] = bitsToByteRev(data + offset + bits);
for (unsigned i = 0U; i < bytes; i++) {
wxString temp;
temp.Printf(wxT("%02X "), buffer[i]);
output += temp;
}
for (unsigned int i = bytes; i < 16U; i++)
output += wxT(" ");
output += wxT(" *");
for (unsigned i = 0U; i < bytes; i++) {
unsigned char c = buffer[i];
if (::isprint(c))
output += wxChar(c);
else
output += wxT('.');
}
output += wxT('*');
wxLogMessage(wxT("%04X: %s"), offset / 8U, output.c_str());
offset += 128U;
}
}
void MenuEditor::OnModifyMenuItem(wxCommandEvent& )
{
long index = GetSelectedItem();
int identation = GetItemIdentation(index);
wxString kind;
switch (m_rbItemKind->GetSelection())
{
case 0: kind = wxT("wxITEM_NORMAL"); break;
case 1: kind = wxT("wxITEM_CHECK"); break;
case 2: kind = wxT("wxITEM_RADIO"); break;
}
m_menuList->SetItem(index, 0, wxString(wxChar(' '), identation * IDENTATION) + m_tcLabel->GetValue());
m_menuList->SetItem(index, 1, m_tcShortcut->GetValue());
m_menuList->SetItem(index, 2, m_tcId->GetValue());
m_menuList->SetItem(index, 3, m_tcName->GetValue());
m_menuList->SetItem(index, 4, m_tcHelpString->GetValue());
m_menuList->SetItem(index, 5, kind);
}
//Replace TABs with needed spaces returning a 'tabulated' string
wxString wxFixWidthImportCtrl::TabsToSpaces(const wxString& str) const
{
wxString stRes;
if (m_tabSize < 0)
{
stRes = str;
return stRes;
}
if (m_tabSize == 0)
{
stRes = str;
// remove tabs
stRes.Replace(wxT("\t"), wxEmptyString);
return stRes;
}
size_t pos = 0;
size_t nSp = 0;
wxString tabRep;
wxChar ch;
for ( wxString::const_iterator i = str.begin(); i != str.end(); ++i )
{
ch = *i;
if ( ch == wxT('\t') )
{
tabRep = wxT("");
nSp = (size_t)m_tabSize - (pos % (size_t)m_tabSize);
tabRep.Append(wxChar(' '), nSp);
stRes += tabRep;
pos += nSp;
}
else
{
stRes += ch;
pos++;
}
}
return stRes;
}
/*---------------------------------------------------------------------------*/
wxString wxBlobDialog::GetHexaString(wxMemoryBuffer* buffer)
{
wxString retStr, HexStr, carStr;
size_t bLen, strLen;
char c;
bLen = buffer->GetDataLen();
bLen = (bLen < 32 ? bLen : 32);
for (size_t i = 0, count = 0; i < 4; i++)
{
if (count >= bLen)
break;
HexStr = carStr = wxEmptyString;
for (size_t j = 0; j < 8; j++, count++)
{
if (count >= bLen)
break;
c = ((char*)buffer->GetData())[count];
if (c < 32)
{
if (c == 7 || c == '\r' || c == '\n')
carStr += " ";
else
{
m_FlagBin = true;
carStr += "?";
}
}
else
carStr += wxChar(c);
HexStr += wxString::Format("0x%02X ", (int)c);
}
// _("0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 | xxxxxxxx\n")
strLen = HexStr.Len();
HexStr += wxString(' ', 40 - strLen);
retStr += HexStr + "| " + carStr + "\n";
}
return retStr;
}
wxString
decodeString(const wxString &s)
{
wxString val = s;
wxString ret = wxEmptyString;
if (val.Left(1) == wxT(":") && val.Right(1) == wxT(":") && val.Length() > 1) {
int idx = 1;
val.Remove(0, 1);
while (val.Length()) {
int p = val.Find(wxT(":"));
if (p != -1) {
long l;
val.Left(p).ToLong(&l);
ret += wxChar(l - idx++);
} else
break;
val.Remove(0, p + 1);
}
}
return ret;
}
void MainFrame::UpdateFrame()
{
// Actualizamos el tÃtulo
wxString date(wxT(__DATE__));
wxString time(wxT(__TIME__));
wxString title(wxT("wxFormBuilder (Build on ") + date +wxT(" - ")+ time + wxT(") - "));
if (GetData()->IsModified())
title = title + wxChar('*');
wxString filename = GetData()->GetProjectFileName();
title = title + ( filename.IsEmpty() ?
wxT("[untitled]") :
wxT("[") + filename + wxT("]"));
SetTitle(title);
// Actualizamos los menus
wxMenu *menuEdit = GetMenuBar()->GetMenu(GetMenuBar()->FindMenu(wxT("Edit")));
menuEdit->Enable(ID_REDO,GetData()->CanRedo());
menuEdit->Enable(ID_UNDO,GetData()->CanUndo());
// Actualizamos la barra de herramientas
GetToolBar()->EnableTool(ID_REDO,GetData()->CanRedo());
GetToolBar()->EnableTool(ID_UNDO,GetData()->CanUndo());
GetToolBar()->EnableTool(ID_COPY,GetData()->CanCopyObject());
GetToolBar()->EnableTool(ID_CUT,GetData()->CanCopyObject());
GetToolBar()->EnableTool(ID_DELETE,GetData()->CanCopyObject());
GetToolBar()->EnableTool(ID_PASTE,GetData()->CanPasteObject());
UpdateLayoutTools();
// Actualizamos la barra de estado
// TO-DO: definir un campo...
}
size_t nwxProcess::ProcessIO(
wxInputStream *pIn,
wxString &sLine,
bool bErrStream)
{
size_t nRtn = 0;
size_t nLen;
char *pBuffer;
char *pEnd;
const int BUFFER_SIZE = 512;
char sBuffer[BUFFER_SIZE + 1];
char EOL = '\n';
if(pIn->CanRead())
{
nRtn = pIn->Read(sBuffer,BUFFER_SIZE).LastRead();
sBuffer[nRtn] = 0;
if(nRtn)
{
pBuffer = &sBuffer[0];
for(pEnd = strchr(pBuffer,EOL);
pEnd != NULL;
pEnd = strchr(pBuffer,EOL))
{
*pEnd = 0;
sLine.Append(pBuffer);
sLine.Append(wxChar(EOL));
*pEnd = EOL; // restore
nLen = sLine.Len();
ProcessLine(sLine.utf8_str(), nLen, bErrStream);
sLine.Empty();
pBuffer = pEnd;
pBuffer++;
}
sLine += pBuffer;
}
}
return nRtn;
}
void EDA_TEXT::TransformTextShapeToSegmentList( std::vector<wxPoint>& aCornerBuffer ) const
{
wxSize size = GetSize();
if( IsMirrored() )
NEGATE( size.x );
s_cornerBuffer = &aCornerBuffer;
EDA_COLOR_T color = BLACK; // not actually used, but needed by DrawGraphicText
if( IsMultilineAllowed() )
{
wxArrayString strings_list;
wxStringSplit( GetShownText(), strings_list, wxChar('\n') );
std::vector<wxPoint> positions;
positions.reserve( strings_list.Count() );
GetPositionsOfLinesOfMultilineText( positions,strings_list.Count() );
for( unsigned ii = 0; ii < strings_list.Count(); ii++ )
{
wxString txt = strings_list.Item( ii );
DrawGraphicText( NULL, NULL, positions[ii], color,
txt, GetOrientation(), size,
GetHorizJustify(), GetVertJustify(),
GetThickness(), IsItalic(),
true, addTextSegmToBuffer );
}
}
else
{
DrawGraphicText( NULL, NULL, GetTextPosition(), color,
GetText(), GetOrientation(), size,
GetHorizJustify(), GetVertJustify(),
GetThickness(), IsItalic(),
true, addTextSegmToBuffer );
}
}
const wxChar * const nwxString::TIME_FORMAT(wxS("%Y-%m-%d %I:%M:%S %p"));
#ifdef __WXMSW__
#define __EOL wxS("\r\n")
#else
#define __EOL wxS("\n")
#endif
const wxChar * const nwxString::EOL(__EOL);
#undef __EOL
wxString nwxString::TIME_0("Original");
const wxString nwxString::ALPHA_UPPER("ABCDEFGHIJKLMNOPQRSTUVWXYZ");
const wxString nwxString::ALPHA_lower("abcdefghijklmnopqrstuvwxyz");
const wxString nwxString::NUMERIC("0123456789");
const wxString nwxString::EMPTY(wxEmptyString);
const wxChar nwxString::TO_LOWER(wxChar('a') - wxChar('A'));
bool nwxString::IsNumber(const wxString &s, bool bAllowExp)
{
const wxChar *p = s.wc_str();
bool bFoundDigit = false;
bool bRtn = true;
if(IsSign(*p))
{
// optional sign
p++;
}
while(IsNumeric(*p))
{
// digits
bFoundDigit = true;
/* wxHTTP randomly crashes when called on a worker thread, this must be called from main thread ! */
wxString CXLXHostsFileDownloader::Download(const wxString & xlxHostsFileURL)
{
#ifdef XLX_USE_WGET
wxString xlxHostsFileName = wxFileName::CreateTempFileName(_T("XLX_Hosts_"));
wxString commandLine = _T("wget -q -O ") + xlxHostsFileName + _T(" ") + xlxHostsFileURL;
bool execResult = wxShell(commandLine);
if(!execResult) {
wxLogError(_T("Unable do download XLX host file, make sure wget is installed"));
return wxEmptyString;
}
return xlxHostsFileName;
#else
wxHTTP http;
http.SetNotify(false);
http.SetFlags(wxSOCKET_WAITALL);
http.SetHeader( _T("Accept") , _T("text/*") );
http.SetHeader( _T("User-Agent"), _T("ircddbGateway") );
http.SetTimeout(5); // seconds
wxLogMessage(_T("Downloading XLX reflector list from %s"), xlxHostsFileURL.c_str());
// remove "http://" from the url, i.e. minus 7 chars
size_t len = xlxHostsFileURL.length();
wxString path = xlxHostsFileURL.Right(len-7);
// find the first forward slash
int slash = path.Find(wxChar('/'));
len = path.length();
wxString server = path.Left(slash);
path = path.Right(len-slash);
// Note that Connect() wants a host address, not an URL. 80 is the server's port.
if(!http.Connect(server, 80 )) {
wxLogError(_T("Failed to connect to %s"), server);
return wxEmptyString;
}
wxInputStream* in = NULL;
if((in = http.GetInputStream(path)) && in->IsOk()) {
wxFile file;
wxString xlxHostsFileName = wxFileName::CreateTempFileName(_T("XLX_Hosts_"), &file);
wxLogMessage(_T("Created temporary file %s"), xlxHostsFileName);
if(!file.IsOpened()) {
wxLogError(_T("Failed to open temporary file %s"), xlxHostsFileName);
wxDELETE(in);
return wxEmptyString;
}
//in->Read(fileStream);
//fileStream.Write(*in);
//in->Read(tempFileStream);
//Both call above seem to not work when run in a separate thread, hence the old fashion loop below
unsigned char buffer[2048];
while(!in->Eof()) {
in->Read(buffer, 2048);
int readCount = in->LastRead();
if(readCount <= 0)
break;
file.Write(buffer, readCount);
}
wxLogMessage(_T("XLX Successfuly downloaded to %s"), xlxHostsFileName);
file.Close();
http.Close();
wxDELETE(in);
return xlxHostsFileName;
}
wxLogError(_T("Failed to get HTTP stream"));
if(in) wxDELETE(in);
return wxEmptyString;
#endif
}
void CVPCB_MAINFRAME::OnSelectComponent( wxListEvent& event )
{
if( m_skipComponentSelect )
return;
wxString libraryName;
COMPONENT* component = NULL;
int filter = FOOTPRINTS_LISTBOX::UNFILTERED;
if( m_mainToolBar->GetToolToggled( ID_CVPCB_FOOTPRINT_DISPLAY_FILTERED_LIST ) )
filter |= FOOTPRINTS_LISTBOX::BY_COMPONENT;
if( m_mainToolBar->GetToolToggled( ID_CVPCB_FOOTPRINT_DISPLAY_PIN_FILTERED_LIST ) )
filter |= FOOTPRINTS_LISTBOX::BY_PIN_COUNT;
if( m_mainToolBar->GetToolToggled( ID_CVPCB_FOOTPRINT_DISPLAY_BY_LIBRARY_LIST ) )
filter |= FOOTPRINTS_LISTBOX::BY_LIBRARY;
component = GetSelectedComponent();
libraryName = m_libListBox->GetSelectedLibrary();
m_footprintListBox->SetFootprints( m_footprints, libraryName, component, filter );
// Tell AuiMgr that objects are changed !
if( m_auimgr.GetManagedWindow() ) // Be sure Aui Manager is initialized
// (could be not the case when starting CvPcb
m_auimgr.Update();
if( component == NULL )
return;
// Preview of the already assigned footprint.
// Find the footprint that was already chosen for this component and select it,
// but only if the selection is made from the component list or the library list.
// If the selection is made from the footprint list, do not change the current
// selected footprint.
if( FindFocus() == m_compListBox || FindFocus() == m_libListBox )
{
wxString module = FROM_UTF8( component->GetFPID().Format().c_str() );
bool found = false;
for( int ii = 0; ii < m_footprintListBox->GetCount(); ii++ )
{
wxString footprintName;
wxString msg = m_footprintListBox->OnGetItemText( ii, 0 );
msg.Trim( true );
msg.Trim( false );
footprintName = msg.AfterFirst( wxChar( ' ' ) );
if( module.Cmp( footprintName ) == 0 )
{
m_footprintListBox->SetSelection( ii, true );
found = true;
break;
}
}
if( !found )
{
int ii = m_footprintListBox->GetSelection();
if ( ii >= 0 )
m_footprintListBox->SetSelection( ii, false );
if( GetFpViewerFrame() )
{
CreateScreenCmp();
}
}
}
SendMessageToEESCHEMA();
DisplayStatus();
}
void DIALOG_MODULE_BOARD_EDITOR::Browse3DLib( wxCommandEvent& event )
{
wxString fullfilename, shortfilename;
wxString fullpath;
fullpath = wxGetApp().ReturnLastVisitedLibraryPath( LIB3D_PATH );
#ifdef __WINDOWS__
fullpath.Replace( wxT( "/" ), wxT( "\\" ) );
#endif
wxString fileFilters;
fileFilters = wxGetTranslation( Shapes3DFileWildcard );
fileFilters += wxChar( '|' );
fileFilters += wxGetTranslation( IDF3DFileWildcard );
fullfilename = EDA_FileSelector( _( "3D Shape:" ),
fullpath,
wxEmptyString,
wxEmptyString,
wxGetTranslation( fileFilters ),
this,
wxFD_OPEN,
true
);
if( fullfilename.IsEmpty() )
return;
wxFileName fn = fullfilename;
wxGetApp().SaveLastVisitedLibraryPath( fn.GetPath() );
/* If the file path is already in the default search path
* list, just add the name to the list. Otherwise, add
* the name with the full or relative path.
* the relative path, when possible is preferable,
* because it preserve use of default search path, when the path is a
* sub path
*/
wxString default_path;
wxGetEnv( wxT( KISYS3DMOD ), &default_path );
fn.MakeRelativeTo( default_path );
// Here, we want a path relative only to the default_path
if( fn.GetPathWithSep().StartsWith( wxT("..") ) )
fn = fullfilename; // keep the full file name
shortfilename = fn.GetFullPath();
if( fn.IsAbsolute() )
{ // Absolute path, ask if the user wants a relative one
int diag = wxMessageBox(
_( "Use a relative path?" ),
_( "Path type" ),
wxYES_NO | wxICON_QUESTION, this );
if( diag == wxYES )
{ // Make it relative
fn.MakeRelativeTo( wxT(".") );
shortfilename = fn.GetFullPath();
}
}
S3D_MASTER* new3DShape = new S3D_MASTER( NULL );
#ifdef __WINDOWS__
// Store filename in Unix notation
shortfilename.Replace( wxT( "\\" ), wxT( "/" ) );
#endif
new3DShape->SetShape3DName( shortfilename );
m_Shapes3D_list.push_back( new3DShape );
m_3D_ShapeNameListBox->Append( shortfilename );
if( m_LastSelected3DShapeIndex >= 0 )
TransfertDisplayTo3DValues( m_LastSelected3DShapeIndex );
m_LastSelected3DShapeIndex = m_3D_ShapeNameListBox->GetCount() - 1;
m_3D_ShapeNameListBox->SetSelection( m_LastSelected3DShapeIndex );
Transfert3DValuesToDisplay( m_Shapes3D_list[m_LastSelected3DShapeIndex] );
}