int __cdecl _XcptFilter (
unsigned long xcptnum,
PEXCEPTION_POINTERS pxcptinfoptrs
)
{
struct _XCPT_ACTION * pxcptact;
_PHNDLR phandler;
void *oldpxcptinfoptrs;
int oldfpecode;
int indx;
_ptiddata ptd = _getptd_noexit();
if (!ptd) {
// we can't deal with it - pass it on.
return( UnhandledExceptionFilter(pxcptinfoptrs) );
}
pxcptact = xcptlookup(xcptnum, ptd->_pxcptacttab);
if (pxcptact == NULL)
{
phandler = SIG_DFL;
}
else
{
phandler = pxcptact->XcptAction;
}
/*
* first, take care of all unrecognized exceptions and exceptions with
* XcptAction values of SIG_DFL.
*/
if ( phandler == SIG_DFL )
/*
* pass the buck to the UnhandledExceptionFilter
*/
return( UnhandledExceptionFilter(pxcptinfoptrs) );
/*
* next, weed out all of the exceptions that need to be handled by
* dying, perhaps with a runtime error message
*/
if ( phandler == SIG_DIE ) {
/*
* reset XcptAction (in case of recursion) and drop into the
* except-clause.
*/
pxcptact->XcptAction = SIG_DFL;
return(EXCEPTION_EXECUTE_HANDLER);
}
/*
* next, weed out all of the exceptions that are simply ignored
*/
if ( phandler == SIG_IGN )
/*
* resume execution
*/
return(EXCEPTION_CONTINUE_EXECUTION);
/*
* the remaining exceptions all correspond to C signals which have
* signal handlers associated with them. for some, special setup
* is required before the signal handler is called. in all cases,
* if the signal handler returns, -1 is returned by this function
* to resume execution at the point where the exception occurred.
*/
/*
* save the old value of _pxcptinfoptrs (in case this is a nested
* exception/signal) and store the current one.
*/
oldpxcptinfoptrs = PXCPTINFOPTRS;
PXCPTINFOPTRS = pxcptinfoptrs;
/*
* call the user-supplied signal handler
*
* floating point exceptions must be handled specially since, from
* the C point-of-view, there is only one signal. the exact identity
* of the exception is passed in the global variable _fpecode.
*/
if ( pxcptact->SigNum == SIGFPE ) {
/*
* reset the XcptAction field to the default for all entries
* corresponding to SIGFPE.
*/
for ( indx = _First_FPE_Indx ;
indx < _First_FPE_Indx + _Num_FPE ;
indx++ )
{
( (struct _XCPT_ACTION *)(ptd->_pxcptacttab) +
indx )->XcptAction = SIG_DFL;
}
/*
* Save the current _fpecode in case it is a nested floating
* point exception (not clear that we need to support this,
* but it's easy).
*/
oldfpecode = FPECODE;
/*
* there are no exceptions corresponding to
* following _FPE_xxx codes:
*
* _FPE_UNEMULATED
* _FPE_SQRTNEG
*
* futhermore, STATUS_FLOATING_STACK_CHECK is
* raised for both floating point stack under-
* flow and overflow. thus, the exception does
* not distinguish between _FPE_STACKOVERLOW
* and _FPE_STACKUNDERFLOW. arbitrarily, _fpecode
* is set to the former value.
*
* the following should be a switch statement but, alas, the
* compiler doesn't like switching on unsigned longs...
*/
if ( pxcptact->XcptNum == STATUS_FLOAT_DIVIDE_BY_ZERO )
FPECODE = _FPE_ZERODIVIDE;
else if ( pxcptact->XcptNum == STATUS_FLOAT_INVALID_OPERATION )
FPECODE = _FPE_INVALID;
else if ( pxcptact->XcptNum == STATUS_FLOAT_OVERFLOW )
FPECODE = _FPE_OVERFLOW;
else if ( pxcptact->XcptNum == STATUS_FLOAT_UNDERFLOW )
FPECODE = _FPE_UNDERFLOW;
else if ( pxcptact->XcptNum == STATUS_FLOAT_DENORMAL_OPERAND )
FPECODE = _FPE_DENORMAL;
else if ( pxcptact->XcptNum == STATUS_FLOAT_INEXACT_RESULT )
FPECODE = _FPE_INEXACT;
else if ( pxcptact->XcptNum == STATUS_FLOAT_STACK_CHECK )
FPECODE = _FPE_STACKOVERFLOW;
/*
* call the SIGFPE handler. note the special code to support
* old MS-C programs whose SIGFPE handlers expect two args.
*
* NOTE: THE CAST AND CALL BELOW DEPEND ON __cdecl BEING
* CALLER CLEANUP!
*/
(*(void (__cdecl *)(int, int))phandler)(SIGFPE, FPECODE);
/*
* restore the old value of _fpecode
*/
FPECODE = oldfpecode;
}
else {
/*
* reset the XcptAction field to the default, then call the
* user-supplied handler
*/
pxcptact->XcptAction = SIG_DFL;
(*phandler)(pxcptact->SigNum);
}
/*
* restore the old value of _pxcptinfoptrs
*/
PXCPTINFOPTRS = oldpxcptinfoptrs;
return(EXCEPTION_CONTINUE_EXECUTION);
}
{
LPVOID v2; // eax@1
LPVOID v3; // esi@1
int v4; // eax@1
void (__cdecl *v5)(_DWORD); // edx@2
LONG result; // eax@4
int v7; // edi@7
int v8; // ebx@8
int v9; // ecx@9
int v10; // ebx@11
int v11; // eax@11
v2 = _getptd();
v3 = v2;
v4 = xcptlookup(a1, *((_DWORD *)v2 + 20));
if ( v4 && (v5 = *(void (__cdecl **)(_DWORD))(v4 + 8)) != 0 )
{
if ( v5 == (void (__cdecl *)(_DWORD))5 )
{
*(_DWORD *)(v4 + 8) = 0;
result = 1;
}
else
{
if ( v5 == (void (__cdecl *)(_DWORD))1 )
{
result = -1;
}
else
{
v7 = *((_DWORD *)v3 + 21);
int _CALLTYPE1 _XcptFilter (
unsigned long xcptnum,
PEXCEPTION_POINTERS pxcptinfoptrs
)
{
struct _XCPT_ACTION * pxcptact;
_PHNDLR phandler;
void *oldpxcptinfoptrs;
int oldfpecode;
/*
* first, determine if this exception needs to be passed on to the next
* higher exception handler. note that this includes any exception that
* is not recognized (i.e., is not in the table)
*/
if ( ((pxcptact = xcptlookup(xcptnum)) == NULL) ||
(pxcptact->XcptAction == SIG_DFL) )
/*
* pass the buck to the next level exception handler
*/
return(EXCEPTION_CONTINUE_SEARCH);
#ifdef DEBUG
prXcptActTabEntry(pxcptact);
#endif /* DEBUG */
/*
* next, weed out all of the exceptions that need to be handled by
* dying, perhaps with a runtime error message
*/
if ( pxcptact->XcptAction == SIG_DIE ) {
/*
* reset XcptAction (in case of recursion) and drop into the
* except-clause.
*/
pxcptact->XcptAction = SIG_DFL;
return(EXCEPTION_EXECUTE_HANDLER);
}
/*
* next, weed out all of the exceptions that are simply ignored
*/
if ( pxcptact->XcptAction == SIG_IGN )
/*
* resume execution
*/
return(EXCEPTION_CONTINUE_EXECUTION);
/*
* the remaining exceptions all correspond to C signals which have
* signal handlers associated with them. for some, special setup
* is required before the signal handler is called. in all cases,
* if the signal handler returns, -1 is returned by this function
* to resume execution at the point where the exception occurred.
*
* before calling the signal handler, the XcptAction field of the
* exception-action table entry must be reset.
*/
phandler = pxcptact->XcptAction;
/*
* reset the action to be the default
*/
pxcptact->XcptAction = SIG_DFL;
/*
* save the old value of _pxcptinfoptrs (in case this is a nested
* exception/signal) and store the current one.
*/
oldpxcptinfoptrs = _pxcptinfoptrs;
_pxcptinfoptrs = pxcptinfoptrs;
/*
* call the user-supplied signal handler
*
* floating point exceptions must be handled specially since, from
* the C point-of-view, there is only one signal. the exact identity
* of the exception is passed in the global variable _fpecode.
*/
if ( pxcptact->SigNum == SIGFPE ) {
/*
* Save the current _fpecode in case it is a nested floating
* point exception (not clear that we need to support this,
* but it's easy).
*/
oldfpecode = _fpecode;
/*
* there are no exceptions corresponding to
* following _FPE_xxx codes:
*
* _FPE_UNEMULATED
* _FPE_SQRTNEG
*
* futhermore, STATUS_FLOATING_STACK_CHECK is
* raised for both floating point stack under-
* flow and overflow. thus, the exception does
* not distinguish between _FPE_STACKOVERLOW
* and _FPE_STACKUNDERFLOW. arbitrarily, _fpecode
* is set to the former value.
*
* the following should be a switch statement but, alas, the
* compiler doesn't like switching on unsigned longs...
*/
if ( pxcptact->XcptNum == STATUS_FLOAT_DIVIDE_BY_ZERO )
_fpecode = _FPE_ZERODIVIDE;
else if ( pxcptact->XcptNum == STATUS_FLOAT_INVALID_OPERATION )
_fpecode = _FPE_INVALID;
else if ( pxcptact->XcptNum == STATUS_FLOAT_OVERFLOW )
_fpecode = _FPE_OVERFLOW;
else if ( pxcptact->XcptNum == STATUS_FLOAT_UNDERFLOW )
_fpecode = _FPE_UNDERFLOW;
else if ( pxcptact->XcptNum == STATUS_FLOAT_DENORMAL_OPERAND )
#ifdef _MT
(*pptd)->_tfpecode = _FPE_DENORMAL;
#else /* not _MT */
_fpecode = _FPE_DENORMAL;
#endif /* _MT */
else if ( pxcptact->XcptNum == STATUS_FLOAT_INEXACT_RESULT )
