/* First C function to be called on Xen boot */
asmlinkage void __init xen_start_kernel(void)
{
pgd_t *pgd;
if (!xen_start_info)
return;
xen_domain_type = XEN_PV_DOMAIN;
/* Install Xen paravirt ops */
pv_info = xen_info;
pv_init_ops = xen_init_ops;
pv_time_ops = xen_time_ops;
pv_cpu_ops = xen_cpu_ops;
pv_apic_ops = xen_apic_ops;
pv_mmu_ops = xen_mmu_ops;
#ifdef CONFIG_X86_64
/*
* Setup percpu state. We only need to do this for 64-bit
* because 32-bit already has %fs set properly.
*/
load_percpu_segment(0);
#endif
xen_init_irq_ops();
xen_init_cpuid_mask();
#ifdef CONFIG_X86_LOCAL_APIC
/*
* set up the basic apic ops.
*/
set_xen_basic_apic_ops();
#endif
xen_setup_features();
if (xen_feature(XENFEAT_mmu_pt_update_preserve_ad)) {
pv_mmu_ops.ptep_modify_prot_start = xen_ptep_modify_prot_start;
pv_mmu_ops.ptep_modify_prot_commit = xen_ptep_modify_prot_commit;
}
machine_ops = xen_machine_ops;
/*
* The only reliable way to retain the initial address of the
* percpu gdt_page is to remember it here, so we can go and
* mark it RW later, when the initial percpu area is freed.
*/
xen_initial_gdt = &per_cpu(gdt_page, 0);
xen_smp_init();
/* Get mfn list */
if (!xen_feature(XENFEAT_auto_translated_physmap))
xen_build_dynamic_phys_to_machine();
pgd = (pgd_t *)xen_start_info->pt_base;
/* Prevent unwanted bits from being set in PTEs. */
__supported_pte_mask &= ~_PAGE_GLOBAL;
if (!xen_initial_domain())
__supported_pte_mask &= ~(_PAGE_PWT | _PAGE_PCD);
#ifdef CONFIG_X86_64
/* Work out if we support NX */
check_efer();
#endif
/* Don't do the full vcpu_info placement stuff until we have a
possible map and a non-dummy shared_info. */
per_cpu(xen_vcpu, 0) = &HYPERVISOR_shared_info->vcpu_info[0];
local_irq_disable();
early_boot_irqs_off();
xen_raw_console_write("mapping kernel into physical memory\n");
pgd = xen_setup_kernel_pagetable(pgd, xen_start_info->nr_pages);
init_mm.pgd = pgd;
/* keep using Xen gdt for now; no urgent need to change it */
pv_info.kernel_rpl = 1;
if (xen_feature(XENFEAT_supervisor_mode_kernel))
pv_info.kernel_rpl = 0;
/* set the limit of our address space */
xen_reserve_top();
#ifdef CONFIG_X86_32
/* set up basic CPUID stuff */
cpu_detect(&new_cpu_data);
new_cpu_data.hard_math = 1;
new_cpu_data.wp_works_ok = 1;
new_cpu_data.x86_capability[0] = cpuid_edx(1);
#endif
/* Poke various useful things into boot_params */
boot_params.hdr.type_of_loader = (9 << 4) | 0;
boot_params.hdr.ramdisk_image = xen_start_info->mod_start
? __pa(xen_start_info->mod_start) : 0;
boot_params.hdr.ramdisk_size = xen_start_info->mod_len;
boot_params.hdr.cmd_line_ptr = __pa(xen_start_info->cmd_line);
if (!xen_initial_domain()) {
add_preferred_console("xenboot", 0, NULL);
add_preferred_console("tty", 0, NULL);
add_preferred_console("hvc", 0, NULL);
}
xen_raw_console_write("about to get started...\n");
/* Start the world */
#ifdef CONFIG_X86_32
i386_start_kernel();
#else
x86_64_start_reservations((char *)__pa_symbol(&boot_params));
#endif
}
/* First C function to be called on Xen boot */
asmlinkage void __init xen_start_kernel(void)
{
pgd_t *pgd;
if (!xen_start_info)
return;
xen_domain_type = XEN_PV_DOMAIN;
/* Install Xen paravirt ops */
pv_info = xen_info;
pv_init_ops = xen_init_ops;
pv_time_ops = xen_time_ops;
pv_cpu_ops = xen_cpu_ops;
pv_apic_ops = xen_apic_ops;
x86_init.resources.memory_setup = xen_memory_setup;
x86_init.oem.arch_setup = xen_arch_setup;
x86_init.oem.banner = xen_banner;
x86_init.timers.timer_init = xen_time_init;
x86_init.timers.setup_percpu_clockev = x86_init_noop;
x86_cpuinit.setup_percpu_clockev = x86_init_noop;
x86_platform.calibrate_tsc = xen_tsc_khz;
x86_platform.get_wallclock = xen_get_wallclock;
x86_platform.set_wallclock = xen_set_wallclock;
/*
* Set up some pagetable state before starting to set any ptes.
*/
xen_init_mmu_ops();
/* Prevent unwanted bits from being set in PTEs. */
__supported_pte_mask &= ~_PAGE_GLOBAL;
if (!xen_initial_domain())
__supported_pte_mask &= ~(_PAGE_PWT | _PAGE_PCD);
__supported_pte_mask |= _PAGE_IOMAP;
/*
* Prevent page tables from being allocated in highmem, even
* if CONFIG_HIGHPTE is enabled.
*/
__userpte_alloc_gfp &= ~__GFP_HIGHMEM;
#ifdef CONFIG_X86_64
/* Work out if we support NX */
check_efer();
#endif
xen_setup_features();
/* Get mfn list */
if (!xen_feature(XENFEAT_auto_translated_physmap))
xen_build_dynamic_phys_to_machine();
/*
* Set up kernel GDT and segment registers, mainly so that
* -fstack-protector code can be executed.
*/
xen_setup_stackprotector();
xen_init_irq_ops();
xen_init_cpuid_mask();
#ifdef CONFIG_X86_LOCAL_APIC
/*
* set up the basic apic ops.
*/
set_xen_basic_apic_ops();
#endif
if (xen_feature(XENFEAT_mmu_pt_update_preserve_ad)) {
pv_mmu_ops.ptep_modify_prot_start = xen_ptep_modify_prot_start;
pv_mmu_ops.ptep_modify_prot_commit = xen_ptep_modify_prot_commit;
}
machine_ops = xen_machine_ops;
/*
* The only reliable way to retain the initial address of the
* percpu gdt_page is to remember it here, so we can go and
* mark it RW later, when the initial percpu area is freed.
*/
xen_initial_gdt = &per_cpu(gdt_page, 0);
xen_smp_init();
pgd = (pgd_t *)xen_start_info->pt_base;
/* Don't do the full vcpu_info placement stuff until we have a
possible map and a non-dummy shared_info. */
per_cpu(xen_vcpu, 0) = &HYPERVISOR_shared_info->vcpu_info[0];
local_irq_disable();
early_boot_irqs_off();
xen_raw_console_write("mapping kernel into physical memory\n");
pgd = xen_setup_kernel_pagetable(pgd, xen_start_info->nr_pages);
init_mm.pgd = pgd;
/* keep using Xen gdt for now; no urgent need to change it */
pv_info.kernel_rpl = 1;
if (xen_feature(XENFEAT_supervisor_mode_kernel))
pv_info.kernel_rpl = 0;
/* set the limit of our address space */
xen_reserve_top();
#ifdef CONFIG_X86_32
/* set up basic CPUID stuff */
cpu_detect(&new_cpu_data);
new_cpu_data.hard_math = 1;
new_cpu_data.wp_works_ok = 1;
new_cpu_data.x86_capability[0] = cpuid_edx(1);
#endif
/* Poke various useful things into boot_params */
boot_params.hdr.type_of_loader = (9 << 4) | 0;
boot_params.hdr.ramdisk_image = xen_start_info->mod_start
? __pa(xen_start_info->mod_start) : 0;
boot_params.hdr.ramdisk_size = xen_start_info->mod_len;
boot_params.hdr.cmd_line_ptr = __pa(xen_start_info->cmd_line);
if (!xen_initial_domain()) {
add_preferred_console("xenboot", 0, NULL);
add_preferred_console("tty", 0, NULL);
add_preferred_console("hvc", 0, NULL);
}
xen_raw_console_write("about to get started...\n");
xen_setup_runstate_info(0);
/* Start the world */
#ifdef CONFIG_X86_32
i386_start_kernel();
#else
x86_64_start_reservations((char *)__pa_symbol(&boot_params));
#endif
}