/*
* ibm8514Probe --
* probe and initialize the hardware driver
*/
Bool
ibm8514Probe()
{
OFlagSet validOptions;
xf86ClearIOPortList(ibm8514InfoRec.scrnIndex);
xf86AddIOPorts(ibm8514InfoRec.scrnIndex, Num_ibm8514_IOPorts,
ibm8514_IOPorts);
if (ibm8514InfoRec.chipset) {
if (StrCaseCmp(ibm8514InfoRec.chipset, "ibm8514")) {
ErrorF("Chipset specified in XF86Config is not \"ibm8514\" (%s)!\n",
ibm8514InfoRec.chipset);
return(FALSE);
}
xf86EnableIOPorts(ibm8514InfoRec.scrnIndex);
}
else
{
xf86EnableIOPorts(ibm8514InfoRec.scrnIndex);
/* Reset the 8514/A, and disable all interrupts. */
outw(SUBSYS_CNTL, GPCTRL_RESET | CHPTEST_NORMAL);
outw(SUBSYS_CNTL, GPCTRL_ENAB | CHPTEST_NORMAL);
/* Check to see if an 8514/A is actually installed by writing to
* the ERR_TERM register, and reading back. The 0x5a5a value is
* entirely arbitrary.
*/
outw(ERR_TERM, 0x5a5a);
if (inw(ERR_TERM) != 0x5a5a) {
xf86DisableIOPorts(ibm8514InfoRec.scrnIndex);
return(FALSE);
}
/* 6 mar 93 TCG : let's make certain */
outw(ERR_TERM, 0x5555);
if (inw(ERR_TERM) != 0x5555) {
xf86DisableIOPorts(ibm8514InfoRec.scrnIndex);
return(FALSE);
}
}
ibm8514InfoRec.chipset = "ibm8514";
xf86ProbeFailed = FALSE;
OFLG_ZERO(&validOptions);
xf86VerifyOptions(&validOptions, &ibm8514InfoRec);
return(TRUE);
}
void ibm8514CleanUp(void)
{
int i;
if (LUTInited != -1) {
outb(DAC_W_INDEX, 0);
for (i = 0; i < 256; i++) {
outb(DAC_DATA, oldlut[i].r);
outb(DAC_DATA, oldlut[i].g);
outb(DAC_DATA, oldlut[i].b);
}
}
if (old_DAC_MASK != -1) {
outb(DAC_MASK, old_DAC_MASK);
}
outw(ADVFUNC_CNTL, 6);
xf86DisableIOPorts(ibm8514InfoRec.scrnIndex);
}
void
s3CleanUp(void)
{
int i;
unsigned char tmp;
outb(vgaCRIndex, 0x39);
outb(vgaCRReg, 0xa5);
if (s3MmioMem != NULL ) {
WaitIdle();
VerticalRetraceWait();
((mmtr)s3MmioMem)->memport_regs.regs.fifo_control = oldS3->fifo[0];
WaitIdle(); /* Don't ask... */
((mmtr)s3MmioMem)->memport_regs.regs.streams_timeout = oldS3->fifo[1];
}
#if 1
/* This seems to help, but maybe a wait for */
/* VSYNC would be better than WaitIdleEmpty(). */
/* STREAMS disable code, for 24 & 32 Bpp */
if ( ( s3InfoRec.bitsPerPixel == 32 ||
s3InfoRec.bitsPerPixel == 24 ) &&
s3MmioMem != NULL ) {
/* temp - KJB */
((mmtr)s3MmioMem)->streams_regs.regs.prim_fbaddr0 = 0;
/* ((y * s3DisplayWidth + (x & ~3)) * s3Bpp) */ /* & ~3 */;
/* end temp */
outb(vgaCRIndex, 0x67);
tmp = inb(vgaCRReg);
/* WaitIdleEmpty(); */
/* Disable STREAMS processor */
outb( vgaCRReg, tmp & ~0x0C );
}
#endif
vgaProtect(TRUE);
if (s3NewMmio) {
outb (vgaCRIndex, 0x58);
outb (vgaCRReg, s3SAM256); /* disable linear mode */
} /* end BL */
WaitQueue(8);
outb(vgaCRIndex, 0x35);
tmp = inb(vgaCRReg);
outb(vgaCRReg, (tmp & 0xf0));
cebank();
if (s3NewMmio) {
outb(vgaCRIndex, 0x53);
outb(vgaCRReg, 0x00);
}
/* Restore S3 Trio32/64 ext. sequenzer (PLL) registers */
if (DAC_IS_TRIO)
{
outb(0x3c2, oldS3->Trio[0]);
outb(0x3c4, 0x08); outb(0x3c5, 0x06);
outb(0x3c4, 0x09); outb(0x3c5, oldS3->Trio[2]);
outb(0x3c4, 0x0a); outb(0x3c5, oldS3->Trio[3]);
outb(0x3c4, 0x0b); outb(0x3c5, oldS3->Trio[4]);
outb(0x3c4, 0x0d); outb(0x3c5, oldS3->Trio[5]);
outb(0x3c4, 0x10); outb(0x3c5, oldS3->Trio[8]);
outb(0x3c4, 0x11); outb(0x3c5, oldS3->Trio[9]);
outb(0x3c4, 0x12); outb(0x3c5, oldS3->Trio[10]);
outb(0x3c4, 0x13); outb(0x3c5, oldS3->Trio[11]);
outb(0x3c4, 0x1a); outb(0x3c5, oldS3->Trio[12]);
outb(0x3c4, 0x1b); outb(0x3c5, oldS3->Trio[13]);
outb(0x3c4, 0x15);
tmp = inb(0x3c5) & ~0x21;
outb(0x3c5, tmp | 0x03);
outb(0x3c5, tmp | 0x23);
outb(0x3c5, tmp | 0x03);
outb(0x3c4, 0x15); outb(0x3c5, oldS3->Trio[6]);
outb(0x3c4, 0x18); outb(0x3c5, oldS3->Trio[7]);
outb(0x3c4, 0x08); outb(0x3c5, oldS3->Trio[1]);
}
/* restore s3 special bits */
/* restore 801 specific registers */
for (i = 32; i < 46; i++) {
outb(vgaCRIndex, 0x40 + i);
outb(vgaCRReg, oldS3->s3sysreg[i]);
}
for (i = 0; i < 16; i++) {
if (!((1 << i) & reg50_mask))
continue;
outb(vgaCRIndex, 0x50 + i);
outb(vgaCRReg, oldS3->s3sysreg[i + 16]);
}
for (i = 0; i < 5; i++) {
outb(vgaCRIndex, 0x30 + i);
outb(vgaCRReg, oldS3->s3reg[i]);
outb(vgaCRIndex, 0x38 + i);
outb(vgaCRReg, oldS3->s3reg[5 + i]);
}
outb(vgaCRIndex, 0x36);
outb(vgaCRReg, oldS3->s3reg[10]);
for (i = 0; i < 16; i++) {
outb(vgaCRIndex, 0x40 + i);
outb(vgaCRReg, oldS3->s3sysreg[i]);
}
outb(vgaCRIndex, 0x45);
inb(vgaCRReg); /* reset color stack pointer */
outb(vgaCRIndex, 0x4A);
for (i = 0; i < 4; i++)
outb(vgaCRReg, oldS3->ColorStack[i]);
outb(vgaCRIndex, 0x45);
inb(vgaCRReg); /* reset color stack pointer */
outb(vgaCRIndex, 0x4B);
for (i = 4; i < 8; i++)
outb(vgaCRReg, oldS3->ColorStack[i]);
if (OFLG_ISSET(CLOCK_OPTION_ICS2595, &s3InfoRec.clockOptions)){
outb(vgaCRIndex, 0x42);
outb(vgaCRReg, (oldS3->s3sysreg[2] & 0xf0) | 0x01);
outb(vgaCRIndex, 0x5c); /* switch back to 28MHz clock */
outb(vgaCRReg, 0x20);
outb(vgaCRReg, 0x00);
}
vgaHWRestore((vgaHWPtr)oldS3);
outb(0x3c2, old_clock);
i = inb(0x3CC);
if (savedVgaIOBase == 0x3B0)
i &= 0xFE;
else
i |= 0x01;
outb(0x3C2, i);
vgaIOBase = savedVgaIOBase;
vgaCRIndex = vgaIOBase + 4;
vgaCRReg = vgaIOBase + 5;
vgaProtect(FALSE);
#ifdef PC98
crtswitch(0);
#endif
xf86DisableIOPorts(s3InfoRec.scrnIndex);
}
void
xf86scanpci()
{
unsigned long tmplong1, tmplong2, config_cmd;
unsigned char tmp1, tmp2;
unsigned int i, j, idx = 0;
struct pci_config_reg pcr;
unsigned PCI_CtrlIOPorts[] = { 0xCF8, 0xCFA, 0xCFC };
int Num_PCI_CtrlIOPorts = 3;
unsigned PCI_DevIOPorts[16];
int Num_PCI_DevIOPorts = 16;
unsigned PCI_DevIOAddrPorts[16*16];
int Num_PCI_DevIOAddrPorts = 16*16;
for (i=0; i<16; i++) {
PCI_DevIOPorts[i] = 0xC000 + (i*0x0100);
for (j=0; j<16; j++)
PCI_DevIOAddrPorts[(i*16)+j] = PCI_DevIOPorts[i] + (j*4);
}
xf86ClearIOPortList(0);
xf86AddIOPorts(0, Num_PCI_CtrlIOPorts, PCI_CtrlIOPorts);
xf86AddIOPorts(0, Num_PCI_DevIOPorts, PCI_DevIOPorts);
xf86AddIOPorts(0, Num_PCI_DevIOAddrPorts, PCI_DevIOAddrPorts);
/* Enable I/O access */
xf86EnableIOPorts(0);
outb(0xCF8, 0x00);
outb(0xCFA, 0x00);
tmp1 = inb(0xCF8);
tmp2 = inb(0xCFA);
if ((tmp1 == 0x00) && (tmp2 == 0x00)) {
pcr._configtype = 2;
#ifdef DEBUGPCI
printf("PCI says configuration type 2\n");
#endif
} else {
tmplong1 = inl(0xCF8);
outl(0xCF8, PCI_EN);
tmplong2 = inl(0xCF8);
outl(0xCF8, tmplong1);
if (tmplong2 == PCI_EN) {
pcr._configtype = 1;
#ifdef DEBUGPCI
printf("PCI says configuration type 1\n");
#endif
} else {
pcr._configtype = 0;
#ifdef DEBUGPCI
printf("No PCI !\n");
#endif
xf86DisableIOPorts(0);
xf86ClearIOPortList(0);
return;
}
}
/* Try pci config 1 probe first */
#ifdef DEBUGPCI
printf("\nPCI probing configuration type 1\n");
#endif
pcr._pcibuses[0] = 0;
pcr._pcinumbus = 1;
pcr._pcibusidx = 0;
#ifndef DEBUGPCI
if (pcr._configtype == 1)
#endif
do {
for (pcr._cardnum = 0x0; pcr._cardnum < 0x20; pcr._cardnum += 0x1) {
config_cmd = PCI_EN | (pcr._pcibuses[pcr._pcibusidx]<<16) |
(pcr._cardnum<<11);
outl(0xCF8, config_cmd); /* ioreg 0 */
pcr._device_vendor = inl(0xCFC);
if (pcr._vendor == 0xFFFF) /* nothing there */
continue;
#ifdef DEBUGPCI
printf("\npci bus 0x%x cardnum 0x%02x, vendor 0x%04x device 0x%04x\n",
pcr._pcibuses[pcr._pcibusidx], pcr._cardnum, pcr._vendor,
pcr._device);
#endif
outl(0xCF8, config_cmd | 0x04); pcr._status_command = inl(0xCFC);
outl(0xCF8, config_cmd | 0x08); pcr._class_revision = inl(0xCFC);
outl(0xCF8, config_cmd | 0x0C); pcr._bist_header_latency_cache
= inl(0xCFC);
outl(0xCF8, config_cmd | 0x10); pcr._base0 = inl(0xCFC);
outl(0xCF8, config_cmd | 0x14); pcr._base1 = inl(0xCFC);
outl(0xCF8, config_cmd | 0x18); pcr._base2 = inl(0xCFC);
outl(0xCF8, config_cmd | 0x1C); pcr._base3 = inl(0xCFC);
outl(0xCF8, config_cmd | 0x20); pcr._base4 = inl(0xCFC);
outl(0xCF8, config_cmd | 0x24); pcr._base5 = inl(0xCFC);
outl(0xCF8, config_cmd | 0x30); pcr._baserom = inl(0xCFC);
outl(0xCF8, config_cmd | 0x3C); pcr._max_min_ipin_iline
= inl(0xCFC);
/* check for pci-pci bridges (currently we only know Digital) */
if ((pcr._vendor == 0x1011) && (pcr._device == 0x0001))
if (pcr._secondary_bus_number > 0)
pcr._pcibuses[pcr._pcinumbus++] = pcr._secondary_bus_number;
if (idx >= MAX_PCI_DEVICES)
continue;
if ((pci_devp[idx] = (struct pci_config_reg *)xalloc(sizeof(
struct pci_config_reg))) == (struct pci_config_reg *)NULL) {
outl(0xCF8, 0x00);
xf86DisableIOPorts(0);
xf86ClearIOPortList(0);
return;
}
memcpy(pci_devp[idx++], &pcr, sizeof(struct pci_config_reg));
}
} while (++pcr._pcibusidx < pcr._pcinumbus);
#ifndef DEBUGPCI
if (pcr._configtype == 1) {
outl(0xCF8, 0x00);
return;
}
#endif
/* Now try pci config 2 probe (deprecated) */
outb(0xCF8, 0xF1);
outb(0xCFA, 0x00); /* bus 0 for now */
#ifdef DEBUGPCI
printf("\nPCI probing configuration type 2\n");
#endif
pcr._pcibuses[0] = 0;
pcr._pcinumbus = 1;
pcr._pcibusidx = 0;
do {
for (pcr._ioaddr = 0xC000; pcr._ioaddr < 0xD000; pcr._ioaddr += 0x0100){
outb(0xCFA, pcr._pcibuses[pcr._pcibusidx]); /* bus 0 for now */
pcr._device_vendor = inl(pcr._ioaddr);
outb(0xCFA, 0x00); /* bus 0 for now */
if (pcr._vendor == 0xFFFF) /* nothing there */
continue;
/* opti chipsets that use config type 1 look like this on type 2 */
if ((pcr._vendor == 0xFF00) && (pcr._device == 0xFFFF))
continue;
#ifdef DEBUGPCI
printf("\npci bus 0x%x slot at 0x%04x, vendor 0x%04x device 0x%04x\n",
pcr._pcibuses[pcr._pcibusidx], pcr._ioaddr, pcr._vendor,
pcr._device);
#endif
outb(0xCFA, pcr._pcibuses[pcr._pcibusidx]); /* bus 0 for now */
pcr._status_command = inl(pcr._ioaddr + 0x04);
pcr._class_revision = inl(pcr._ioaddr + 0x08);
pcr._bist_header_latency_cache = inl(pcr._ioaddr + 0x0C);
pcr._base0 = inl(pcr._ioaddr + 0x10);
pcr._base1 = inl(pcr._ioaddr + 0x14);
pcr._base2 = inl(pcr._ioaddr + 0x18);
pcr._base3 = inl(pcr._ioaddr + 0x1C);
pcr._base4 = inl(pcr._ioaddr + 0x20);
pcr._base5 = inl(pcr._ioaddr + 0x24);
pcr._baserom = inl(pcr._ioaddr + 0x30);
pcr._max_min_ipin_iline = inl(pcr._ioaddr + 0x3C);
outb(0xCFA, 0x00); /* bus 0 for now */
/* check for pci-pci bridges (currently we only know Digital) */
if ((pcr._vendor == 0x1011) && (pcr._device == 0x0001))
if (pcr._secondary_bus_number > 0)
pcr._pcibuses[pcr._pcinumbus++] = pcr._secondary_bus_number;
if (idx >= MAX_PCI_DEVICES)
continue;
if ((pci_devp[idx] = (struct pci_config_reg *)xalloc(sizeof(
struct pci_config_reg))) == (struct pci_config_reg *)NULL) {
outb(0xCF8, 0x00);
outb(0xCFA, 0x00);
xf86DisableIOPorts(0);
xf86ClearIOPortList(0);
return;
}
memcpy(pci_devp[idx++], &pcr, sizeof(struct pci_config_reg));
}
} while (++pcr._pcibusidx < pcr._pcinumbus);
outb(0xCF8, 0x00);
outb(0xCFA, 0x00);
xf86DisableIOPorts(0);
xf86ClearIOPortList(0);
}
static void
NEC480EnterLeave(Bool enter)
{
static int flag = 0;
static int graph_mode, hsync31, cont_page;
if(flag == 0)
{
if (enter == ENTER)
xf86EnableIOPorts(vga256InfoRec.scrnIndex);
/* Save current graphic mode, 1: Extended graphic mode */
outb(0x9a0, 0x0a);
graph_mode = inb(0x9a0) & 0x01;
/* Save current G-VRAM page status, 1: continuation */
outb(0x9a0, 0x0d);
cont_page = inb(0x9a0) & 0x01;
/* Save current horizontal sync, 1: 31.5KHz */
if( vga256InfoRec.clock[0] == NEC480_MAX_CLOCK_IN_KHZ ){
hsync31 = inb(0x9a8) & 0x01;
}
flag = 1;
}
if(enter == ENTER)
{
if (flag != 0)
xf86EnableIOPorts(vga256InfoRec.scrnIndex);
while (!(inb(0x60) & 0x20)) ; /* V-SYNC wait */
outb(0x62, 0xc); /* text off */
outb(0xA2, 0xc); /* graphics off */
/* GDC : 5MHz mode */
outb(0x6a, 0x83);
outb(0x6a, 0x85);
if( vga256InfoRec.clock[0] == NEC480_MAX_CLOCK_IN_KHZ ){
gdc_init();
}
outb(0x6a, 0x07);
outb(0x6a, 0x21); /* Extended mode */
outb(0x6a, 0x69); /* Continuous G-VRAM page */
if( vga256InfoRec.clock[0] == NEC480_MAX_CLOCK_IN_KHZ ){
outb(0x9a8, 0x01); /* 24.8KHz -> 31.5KHz */
}
while (!(inb(0x60) & 0x20)) ; /* V-SYNC wait */
outb(0x62, 0xc); /* text off */
outb(0xA2, 0xd); /* graphics on */
}
if(enter == LEAVE)
{
if(graph_mode == 0)
{
outb(0x6a, 0x07);
outb(0x6a, 0x20); /* Standard mode */
}
if(cont_page == 0)
{
outb(0x6a, 0x07);
outb(0x6a, 0x68); /* separate VRAM page */
}
if( vga256InfoRec.clock[0] == NEC480_MAX_CLOCK_IN_KHZ
&& hsync31==0 ){
outb(0x9a8, 0x00); /* 31.5KHz-> 24.8KHz */
}
outb(0xA2, 0xc); /* graphics off */
outb(0x62, 0xd); /* text on */
*ppmodep = ppmode_sv;
xf86DisableIOPorts(vga256InfoRec.scrnIndex);
}
}
/*
* mach8Probe --
* probe and initialize the hardware driver
*/
Bool
mach8Probe()
{
int j, memavail, rounding;
short temp;
DisplayModePtr pMode, pEnd, pmaxX = NULL, pmaxY = NULL;
int maxX, maxY;
OFlagSet validOptions;
int tx, ty;
mach8InfoRec.maxClock = mach8MaxClock;
xf86ClearIOPortList(mach8InfoRec.scrnIndex);
xf86AddIOPorts(mach8InfoRec.scrnIndex, Num_mach8_IOPorts, mach8_IOPorts);
if (mach8InfoRec.chipset) {
if (StrCaseCmp(mach8InfoRec.chipset, "mach8")) {
ErrorF("Chipset specified in XF86Config is not \"mach8\" (%s)!\n",
mach8InfoRec.chipset);
return(FALSE);
}
xf86EnableIOPorts(mach8InfoRec.scrnIndex);
}
else
{
xf86EnableIOPorts(mach8InfoRec.scrnIndex);
/* Reset the 8514/A, and disable all interrupts. */
outw(SUBSYS_CNTL, GPCTRL_RESET | CHPTEST_NORMAL);
outw(SUBSYS_CNTL, GPCTRL_ENAB | CHPTEST_NORMAL);
/* Check to see if an 8514/A is actually installed by writing to
* the ERR_TERM register, and reading back. The 0x5a5a value is
* entirely arbitrary.
*/
outw(ERR_TERM, 0x5a5a);
ProbeWaitIdleEmpty();
if (inw(ERR_TERM) != 0x5a5a) {
ErrorF("%s: No 8514/A registers detected!\n", mach8InfoRec.name);
xf86DisableIOPorts(mach8InfoRec.scrnIndex);
return(FALSE);
}
/* 6 mar 93 TCG : let's make certain */
outw(ERR_TERM, 0x2525);
ProbeWaitIdleEmpty();
if (inw(ERR_TERM) != 0x2525) {
ErrorF("%s: No 8514/A registers detected!\n", mach8InfoRec.name);
xf86DisableIOPorts(mach8InfoRec.scrnIndex);
return(FALSE);
}
temp = inw(ROM_ADDR_1);
outw(ROM_ADDR_1, 0x5555);
ProbeWaitIdleEmpty();
if (inw(ROM_ADDR_1) != 0x5555) {
ErrorF("%s: No ATI accelerator detected\n", mach8InfoRec.name);
xf86DisableIOPorts(mach8InfoRec.scrnIndex);
return(FALSE);
}
outw(ROM_ADDR_1, 0x2a2a);
ProbeWaitIdleEmpty();
if (inw(ROM_ADDR_1) != 0x2a2a) {
ErrorF("%s: No ATI accelerator detected\n", mach8InfoRec.name);
xf86DisableIOPorts(mach8InfoRec.scrnIndex);
return(FALSE);
}
outw(ROM_ADDR_1, temp);
outw(DESTX_DIASTP, 0xaaaa);
ProbeWaitIdleEmpty();
if ((inw(READ_SRC_X) != 0xaaaa) && xf86Verbose) {
outw(DESTX_DIASTP, 0x5555);
ProbeWaitIdleEmpty();
if (inw(READ_SRC_X) == 0x0555) {
ErrorF("%s %s: Mach-32 detected, used as a Mach-8\n",
XCONFIG_PROBED, mach8InfoRec.name);
}
else
ErrorF("%s %s: Mach-8 detected\n", XCONFIG_PROBED,
mach8InfoRec.name);
}
}
OFLG_ZERO(&validOptions);
OFLG_SET(OPTION_CSYNC, &validOptions);
xf86VerifyOptions(&validOptions, &mach8InfoRec);
if (!mach8InfoRec.clocks)
{
outw(DISP_CNTL, DISPEN_DISAB /*| INTERLACE*/ | MEMCFG_4 | ODDBNKENAB);
/* 13-jun-93 TCG : set up dummy video mode */
outw(SHADOW_SET, 1);
outw(SHADOW_CTL, 0);
outw(SHADOW_SET, 2);
outw(SHADOW_CTL, 0);
outw(SHADOW_SET, 0);
outw(ADVFUNC_CNTL, DISABPASSTHRU);
/* vt: 480 488 +31 528 hz: 640 656 +248 920 */
outw(V_TOTAL, 0x420);
outw(V_DISP, 0x3c0);
outw(V_SYNC_STRT, 0x3d0);
outw(V_SYNC_WID, 0x1f);
outw(H_TOTAL, 0x72);
outw(H_DISP, 0x4f);
outw(H_SYNC_STRT, 0x51);
outw(H_SYNC_WID, 0x1f);
outw(DAC_MASK, 0x00);
outw(DISP_CNTL, DISPEN_ENAB | MEMCFG_4 | ODDBNKENAB);
/* 2-oct-93 TCG : detect clocks with dif4 fix */
mach8clkprobedif4fix = TRUE;
xf86GetClocks(16, mach8ClockSelect, (void (*)())NoopDDA,
(SaveScreenProcPtr)NoopDDA, DISP_STAT, 2, 7, 44900,
&mach8InfoRec);
outw(CLOCK_SEL, 0); /* reset pass-through */
mach8clkprobedif4fix = FALSE;
outw(SHADOW_SET, 1);
outw(SHADOW_CTL, 0x3f);
outw(SHADOW_SET, 2);
outw(SHADOW_CTL, 0x3f);
outw(SHADOW_SET, 0);
outw(DAC_MASK, 0xff);
for (j = 0; j < 16; j++)
mach8InfoRec.clock[j + 16] = mach8InfoRec.clock[j] / 2;
mach8InfoRec.clocks = 32;
}
temp = inw(CONFIG_STATUS_1);
if (!mach8InfoRec.videoRam) {
switch((temp & 0x60) >> 5)
{
case 0:
mach8InfoRec.videoRam = 512;
break;
case 1:
mach8InfoRec.videoRam = 1024;
break;
default: /* 2 & 3 reserved in mach-8, used in mach-32 ? */
mach8InfoRec.videoRam = 1024;
break;
}
}
mach8InfoRec.chipset = "mach8";
xf86ProbeFailed = FALSE;
mach8DramUsed = (temp & 0x10) != 0;
if (xf86Verbose)
{
ErrorF("%s %s: (mem: %dk %cRAM numclocks: %d)",
OFLG_ISSET(XCONFIG_VIDEORAM,&mach8InfoRec.xconfigFlag) ?
XCONFIG_GIVEN : XCONFIG_PROBED,
mach8InfoRec.name,
mach8InfoRec.videoRam,
mach8DramUsed ? 'D' : 'V',
mach8InfoRec.clocks);
for (j=0; j < mach8InfoRec.clocks; j++)
{
if ((j % 8) == 0)
ErrorF("\n%s %s: clocks:",
OFLG_ISSET(XCONFIG_CLOCKS,&mach8InfoRec.xconfigFlag) ?
XCONFIG_GIVEN : XCONFIG_PROBED,
mach8InfoRec.name);
ErrorF(" %6.2f", (double)mach8InfoRec.clock[j]/1000.0);
}
ErrorF("\n");
}
memavail = mach8InfoRec.videoRam*1024;
if (mach8InfoRec.virtualX > 0 &&
mach8InfoRec.virtualX * mach8InfoRec.virtualY > memavail)
{
ErrorF("%s: Too little memory for virtual resolution %d %d\n",
mach8InfoRec.name, mach8InfoRec.virtualX,
mach8InfoRec.virtualY);
return(FALSE);
}
maxX = maxY = -1;
pMode = mach8InfoRec.modes;
if (pMode == NULL) {
ErrorF("No modes supplied in XF86Config\n");
return(FALSE);
}
pEnd = NULL;
tx = mach8InfoRec.virtualX;
ty = mach8InfoRec.virtualY;
do {
DisplayModePtr pModeSv;
/*
* xf86LookupMode returns FALSE if it ran into an invalid
* parameter
*/
if(xf86LookupMode(pMode, &mach8InfoRec, LOOKUP_DEFAULT) == FALSE) {
pModeSv=pMode->next;
xf86DeleteMode(&mach8InfoRec, pMode);
pMode = pModeSv;
} else if (pMode->HDisplay > 1024) {
pModeSv=pMode->next;
ErrorF("%s %s: Width to large for mode %s (max 1024)\n",
XCONFIG_PROBED, mach8InfoRec.name, pMode->name);
xf86DeleteMode(&mach8InfoRec, pMode);
pMode = pModeSv;
} else if (pMode->HDisplay * pMode->VDisplay > memavail) {
pModeSv=pMode->next;
ErrorF("%s %s: Too little memory for mode %s\n",
XCONFIG_PROBED, mach8InfoRec.name, pMode->name);
xf86DeleteMode(&mach8InfoRec, pMode);
pMode = pModeSv;
} else if (((tx > 0) && (pMode->HDisplay > tx)) ||
((ty > 0) && (pMode->VDisplay > ty))) {
pModeSv=pMode->next;
ErrorF("%s %s: Resolution %dx%d too large for virtual %dx%d\n",
XCONFIG_PROBED, mach8InfoRec.name,
pMode->HDisplay, pMode->VDisplay, tx, ty);
xf86DeleteMode(&mach8InfoRec, pMode);
pMode = pModeSv;
} else {
/*
* Successfully looked up this mode. If pEnd isn't
* initialized, set it to this mode.
*/
if(pEnd == (DisplayModePtr) NULL)
pEnd = pMode;
if (pMode->HDisplay > maxX)
{
maxX = pMode->HDisplay;
pmaxX = pMode;
}
if (pMode->VDisplay > maxY)
{
maxY = pMode->VDisplay;
pmaxY = pMode;
}
pMode = pMode->next;
}
} while (pMode != pEnd);
mach8InfoRec.virtualX = max(maxX, mach8InfoRec.virtualX);
mach8InfoRec.virtualY = max(maxY, mach8InfoRec.virtualY);
rounding = 8;
if (mach8InfoRec.virtualX % rounding)
{
mach8InfoRec.virtualX -= mach8InfoRec.virtualX % rounding;
ErrorF("%s %s: Virtual width rounded down to a multiple of %d (%d)\n",
XCONFIG_PROBED, mach8InfoRec.name, rounding,
mach8InfoRec.virtualX);
if (mach8InfoRec.virtualX < maxX)
{
ErrorF(
"%s: Rounded down virtual width (%d) is too small for mode %s",
mach8InfoRec.name, mach8InfoRec.virtualX, pmaxX->name);
return(FALSE);
}
ErrorF("%s: Virtual width rounded down to a multiple of %d (%d)\n",
mach8InfoRec.name, rounding, mach8InfoRec.virtualX);
}
if (mach8InfoRec.virtualX > 1024)
{
ErrorF("%s: Virtual width must be no greater than 1024\n",mach8InfoRec.name);
return(FALSE);
}
if ( mach8InfoRec.virtualX * mach8InfoRec.virtualY > memavail)
{
if (mach8InfoRec.virtualX != maxX || mach8InfoRec.virtualY != maxY)
ErrorF(
"%s: Too little memory to accomodate virtual size and mode %s\n",
mach8InfoRec.name,
(mach8InfoRec.virtualX == maxX) ? pmaxX->name : pmaxY->name);
else
ErrorF("%s: Too little memory to accomodate modes %s and %s\n",
mach8InfoRec.name, pmaxX->name, pmaxY->name);
return(FALSE);
}
if (xf86Verbose)
ErrorF("%s %s: Virtual resolution set to %dx%d\n",
OFLG_ISSET(XCONFIG_VIRTUAL,&mach8InfoRec.xconfigFlag) ?
XCONFIG_GIVEN : XCONFIG_PROBED, mach8InfoRec.name,
mach8InfoRec.virtualX, mach8InfoRec.virtualY);
return(TRUE);
}
