/* * Initialise a new set of inodes. When called without a transaction context * (e.g. from recovery) we initiate a delayed write of the inode buffers rather * than logging them (which in a transaction context puts them into the AIL * for writeback rather than the xfsbufd queue). */ int xfs_ialloc_inode_init( struct xfs_mount *mp, struct xfs_trans *tp, struct list_head *buffer_list, xfs_agnumber_t agno, xfs_agblock_t agbno, xfs_agblock_t length, unsigned int gen) { struct xfs_buf *fbuf; struct xfs_dinode *free; int blks_per_cluster, nbufs, ninodes; int version; int i, j; xfs_daddr_t d; xfs_ino_t ino = 0; /* * Loop over the new block(s), filling in the inodes. * For small block sizes, manipulate the inodes in buffers * which are multiples of the blocks size. */ if (mp->m_sb.sb_blocksize >= XFS_INODE_CLUSTER_SIZE(mp)) { blks_per_cluster = 1; nbufs = length; ninodes = mp->m_sb.sb_inopblock; } else { blks_per_cluster = XFS_INODE_CLUSTER_SIZE(mp) / mp->m_sb.sb_blocksize; nbufs = length / blks_per_cluster; ninodes = blks_per_cluster * mp->m_sb.sb_inopblock; } /* * Figure out what version number to use in the inodes we create. If * the superblock version has caught up to the one that supports the new * inode format, then use the new inode version. Otherwise use the old * version so that old kernels will continue to be able to use the file * system. * * For v3 inodes, we also need to write the inode number into the inode, * so calculate the first inode number of the chunk here as * XFS_OFFBNO_TO_AGINO() only works within a filesystem block, not * across multiple filesystem blocks (such as a cluster) and so cannot * be used in the cluster buffer loop below. * * Further, because we are writing the inode directly into the buffer * and calculating a CRC on the entire inode, we have ot log the entire * inode so that the entire range the CRC covers is present in the log. * That means for v3 inode we log the entire buffer rather than just the * inode cores. */ if (xfs_sb_version_hascrc(&mp->m_sb)) { version = 3; ino = XFS_AGINO_TO_INO(mp, agno, XFS_OFFBNO_TO_AGINO(mp, agbno, 0)); /* * log the initialisation that is about to take place as an * logical operation. This means the transaction does not * need to log the physical changes to the inode buffers as log * recovery will know what initialisation is actually needed. * Hence we only need to log the buffers as "ordered" buffers so * they track in the AIL as if they were physically logged. */ if (tp) xfs_icreate_log(tp, agno, agbno, XFS_IALLOC_INODES(mp), mp->m_sb.sb_inodesize, length, gen); } else if (xfs_sb_version_hasnlink(&mp->m_sb)) version = 2; else version = 1; for (j = 0; j < nbufs; j++) { /* * Get the block. */ d = XFS_AGB_TO_DADDR(mp, agno, agbno + (j * blks_per_cluster)); fbuf = xfs_trans_get_buf(tp, mp->m_ddev_targp, d, mp->m_bsize * blks_per_cluster, XBF_UNMAPPED); if (!fbuf) return ENOMEM; /* Initialize the inode buffers and log them appropriately. */ fbuf->b_ops = &xfs_inode_buf_ops; xfs_buf_zero(fbuf, 0, BBTOB(fbuf->b_length)); for (i = 0; i < ninodes; i++) { int ioffset = i << mp->m_sb.sb_inodelog; uint isize = xfs_dinode_size(version); free = xfs_make_iptr(mp, fbuf, i); free->di_magic = cpu_to_be16(XFS_DINODE_MAGIC); free->di_version = version; free->di_gen = cpu_to_be32(gen); free->di_next_unlinked = cpu_to_be32(NULLAGINO); if (version == 3) { free->di_ino = cpu_to_be64(ino); ino++; uuid_copy(&free->di_uuid, &mp->m_sb.sb_uuid); xfs_dinode_calc_crc(mp, free); } else if (tp) { /* just log the inode core */ xfs_trans_log_buf(tp, fbuf, ioffset, ioffset + isize - 1); } } if (tp) { /* * Mark the buffer as an inode allocation buffer so it * sticks in AIL at the point of this allocation * transaction. This ensures the they are on disk before * the tail of the log can be moved past this * transaction (i.e. by preventing relogging from moving * it forward in the log). */ xfs_trans_inode_alloc_buf(tp, fbuf); if (version == 3) { /* * Mark the buffer as ordered so that they are * not physically logged in the transaction but * still tracked in the AIL as part of the * transaction and pin the log appropriately. */ xfs_trans_ordered_buf(tp, fbuf); xfs_trans_log_buf(tp, fbuf, 0, BBTOB(fbuf->b_length) - 1); } } else { fbuf->b_flags |= XBF_DONE; xfs_buf_delwri_queue(fbuf, buffer_list); xfs_buf_relse(fbuf); } } return 0; }
/* * Initialise a new set of inodes. */ STATIC int xfs_ialloc_inode_init( struct xfs_mount *mp, struct xfs_trans *tp, xfs_agnumber_t agno, xfs_agblock_t agbno, xfs_agblock_t length, unsigned int gen) { struct xfs_buf *fbuf; struct xfs_dinode *free; int blks_per_cluster, nbufs, ninodes; int version; int i, j; xfs_daddr_t d; xfs_ino_t ino = 0; /* * Loop over the new block(s), filling in the inodes. * For small block sizes, manipulate the inodes in buffers * which are multiples of the blocks size. */ if (mp->m_sb.sb_blocksize >= XFS_INODE_CLUSTER_SIZE(mp)) { blks_per_cluster = 1; nbufs = length; ninodes = mp->m_sb.sb_inopblock; } else { blks_per_cluster = XFS_INODE_CLUSTER_SIZE(mp) / mp->m_sb.sb_blocksize; nbufs = length / blks_per_cluster; ninodes = blks_per_cluster * mp->m_sb.sb_inopblock; } /* * Figure out what version number to use in the inodes we create. If * the superblock version has caught up to the one that supports the new * inode format, then use the new inode version. Otherwise use the old * version so that old kernels will continue to be able to use the file * system. * * For v3 inodes, we also need to write the inode number into the inode, * so calculate the first inode number of the chunk here as * XFS_OFFBNO_TO_AGINO() only works within a filesystem block, not * across multiple filesystem blocks (such as a cluster) and so cannot * be used in the cluster buffer loop below. * * Further, because we are writing the inode directly into the buffer * and calculating a CRC on the entire inode, we have ot log the entire * inode so that the entire range the CRC covers is present in the log. * That means for v3 inode we log the entire buffer rather than just the * inode cores. */ if (xfs_sb_version_hascrc(&mp->m_sb)) { version = 3; ino = XFS_AGINO_TO_INO(mp, agno, XFS_OFFBNO_TO_AGINO(mp, agbno, 0)); } else if (xfs_sb_version_hasnlink(&mp->m_sb)) version = 2; else version = 1; for (j = 0; j < nbufs; j++) { /* * Get the block. */ d = XFS_AGB_TO_DADDR(mp, agno, agbno + (j * blks_per_cluster)); fbuf = xfs_trans_get_buf(tp, mp->m_ddev_targp, d, mp->m_bsize * blks_per_cluster, XBF_UNMAPPED); if (!fbuf) return ENOMEM; /* * Initialize all inodes in this buffer and then log them. * * XXX: It would be much better if we had just one transaction * to log a whole cluster of inodes instead of all the * individual transactions causing a lot of log traffic. */ fbuf->b_ops = &xfs_inode_buf_ops; xfs_buf_zero(fbuf, 0, BBTOB(fbuf->b_length)); for (i = 0; i < ninodes; i++) { int ioffset = i << mp->m_sb.sb_inodelog; uint isize = xfs_dinode_size(version); free = xfs_make_iptr(mp, fbuf, i); free->di_magic = cpu_to_be16(XFS_DINODE_MAGIC); free->di_version = version; free->di_gen = cpu_to_be32(gen); free->di_next_unlinked = cpu_to_be32(NULLAGINO); if (version == 3) { free->di_ino = cpu_to_be64(ino); ino++; uuid_copy(&free->di_uuid, &mp->m_sb.sb_uuid); xfs_dinode_calc_crc(mp, free); } else { /* just log the inode core */ xfs_trans_log_buf(tp, fbuf, ioffset, ioffset + isize - 1); } } if (version == 3) { /* need to log the entire buffer */ xfs_trans_log_buf(tp, fbuf, 0, BBTOB(fbuf->b_length) - 1); } xfs_trans_inode_alloc_buf(tp, fbuf); } return 0; }