static void
wds_action(struct cam_sim * sim, union ccb * ccb)
{
int unit = cam_sim_unit(sim);
int s;
DBG(DBX "wds%d: action 0x%x\n", unit, ccb->ccb_h.func_code);
switch (ccb->ccb_h.func_code) {
case XPT_SCSI_IO:
s = splcam();
DBG(DBX "wds%d: SCSI IO entered\n", unit);
wds_scsi_io(sim, &ccb->csio);
DBG(DBX "wds%d: SCSI IO returned\n", unit);
splx(s);
break;
case XPT_RESET_BUS:
/* how to do it right ? */
printf("wds%d: reset\n", unit);
ccb->ccb_h.status = CAM_REQ_CMP;
xpt_done(ccb);
break;
case XPT_ABORT:
ccb->ccb_h.status = CAM_UA_ABORT;
xpt_done(ccb);
break;
case XPT_CALC_GEOMETRY:
{
struct ccb_calc_geometry *ccg;
u_int32_t size_mb;
u_int32_t secs_per_cylinder;
ccg = &ccb->ccg;
size_mb = ccg->volume_size
/ ((1024L * 1024L) / ccg->block_size);
ccg->heads = 64;
ccg->secs_per_track = 16;
secs_per_cylinder = ccg->heads * ccg->secs_per_track;
ccg->cylinders = ccg->volume_size / secs_per_cylinder;
ccb->ccb_h.status = CAM_REQ_CMP;
xpt_done(ccb);
break;
}
case XPT_PATH_INQ: /* Path routing inquiry */
{
struct ccb_pathinq *cpi = &ccb->cpi;
cpi->version_num = 1; /* XXX??? */
cpi->hba_inquiry = 0; /* nothing fancy */
cpi->target_sprt = 0;
cpi->hba_misc = 0;
cpi->hba_eng_cnt = 0;
cpi->max_target = 7;
cpi->max_lun = 7;
cpi->initiator_id = WDS_HBA_ID;
cpi->hba_misc = 0;
cpi->bus_id = cam_sim_bus(sim);
cpi->base_transfer_speed = 3300;
strncpy(cpi->sim_vid, "FreeBSD", SIM_IDLEN);
strncpy(cpi->hba_vid, "WD/FDC", HBA_IDLEN);
strncpy(cpi->dev_name, cam_sim_name(sim), DEV_IDLEN);
cpi->unit_number = cam_sim_unit(sim);
cpi->ccb_h.status = CAM_REQ_CMP;
xpt_done(ccb);
break;
}
default:
ccb->ccb_h.status = CAM_REQ_INVALID;
xpt_done(ccb);
break;
}
}
static void
ahci_em_emulate_ses_on_led(device_t dev, union ccb *ccb)
{
struct ahci_enclosure *enc;
struct ses_status_page *page;
struct ses_status_array_dev_slot *ads, *ads0;
struct ses_elm_desc_hdr *elmd;
uint8_t *buf;
int i;
enc = device_get_softc(dev);
buf = ccb->ataio.data_ptr;
/* General request validation. */
if (ccb->ataio.cmd.command != ATA_SEP_ATTN ||
ccb->ataio.dxfer_len < ccb->ataio.cmd.sector_count * 4) {
ccb->ccb_h.status = CAM_REQ_INVALID;
goto out;
}
/* SEMB IDENTIFY */
if (ccb->ataio.cmd.features == 0xEC &&
ccb->ataio.cmd.sector_count >= 16) {
bzero(buf, ccb->ataio.dxfer_len);
buf[0] = 64; /* Valid bytes. */
buf[2] = 0x30; /* NAA Locally Assigned. */
strncpy(&buf[3], device_get_nameunit(dev), 7);
strncpy(&buf[10], "AHCI ", SID_VENDOR_SIZE);
strncpy(&buf[18], "SGPIO Enclosure ", SID_PRODUCT_SIZE);
strncpy(&buf[34], "1.00", SID_REVISION_SIZE);
strncpy(&buf[39], "0001", 4);
strncpy(&buf[43], "S-E-S ", 6);
strncpy(&buf[49], "2.00", 4);
ccb->ccb_h.status = CAM_REQ_CMP;
goto out;
}
/* SEMB RECEIVE DIAGNOSTIC RESULT (0) */
page = (struct ses_status_page *)buf;
if (ccb->ataio.cmd.lba_low == 0x02 &&
ccb->ataio.cmd.features == 0x00 &&
ccb->ataio.cmd.sector_count >= 2) {
bzero(buf, ccb->ataio.dxfer_len);
page->hdr.page_code = 0;
scsi_ulto2b(3, page->hdr.length);
buf[4] = 0;
buf[5] = 1;
buf[6] = 2;
ccb->ccb_h.status = CAM_REQ_CMP;
goto out;
}
/* SEMB RECEIVE DIAGNOSTIC RESULT (1) */
if (ccb->ataio.cmd.lba_low == 0x02 &&
ccb->ataio.cmd.features == 0x01 &&
ccb->ataio.cmd.sector_count >= 13) {
struct ses_enc_desc *ed;
struct ses_elm_type_desc *td;
bzero(buf, ccb->ataio.dxfer_len);
page->hdr.page_code = 0x01;
scsi_ulto2b(4 + 4 + 36 + 4, page->hdr.length);
ed = (struct ses_enc_desc *)&buf[8];
ed->byte0 = 0x11;
ed->subenc_id = 0;
ed->num_types = 1;
ed->length = 36;
strncpy(ed->vendor_id, "AHCI ", SID_VENDOR_SIZE);
strncpy(ed->product_id, "SGPIO Enclosure ", SID_PRODUCT_SIZE);
strncpy(ed->product_rev, " ", SID_REVISION_SIZE);
td = (struct ses_elm_type_desc *)ses_enc_desc_next(ed);
td->etype_elm_type = 0x17;
td->etype_maxelt = enc->channels;
td->etype_subenc = 0;
td->etype_txt_len = 0;
ccb->ccb_h.status = CAM_REQ_CMP;
goto out;
}
/* SEMB RECEIVE DIAGNOSTIC RESULT (2) */
if (ccb->ataio.cmd.lba_low == 0x02 &&
ccb->ataio.cmd.features == 0x02 &&
ccb->ataio.cmd.sector_count >= (3 + enc->channels)) {
bzero(buf, ccb->ataio.dxfer_len);
page->hdr.page_code = 0x02;
scsi_ulto2b(4 + 4 * (1 + enc->channels),
page->hdr.length);
for (i = 0; i < enc->channels; i++) {
ads = &page->elements[i + 1].array_dev_slot;
memcpy(ads, enc->status[i], 4);
ads->common.bytes[0] |=
(enc->ichannels & (1 << i)) ?
SES_OBJSTAT_UNKNOWN :
SES_OBJSTAT_NOTINSTALLED;
}
ccb->ccb_h.status = CAM_REQ_CMP;
goto out;
}
/* SEMB SEND DIAGNOSTIC (2) */
if (ccb->ataio.cmd.lba_low == 0x82 &&
ccb->ataio.cmd.features == 0x02 &&
ccb->ataio.cmd.sector_count >= (3 + enc->channels)) {
ads0 = &page->elements[0].array_dev_slot;
for (i = 0; i < enc->channels; i++) {
ads = &page->elements[i + 1].array_dev_slot;
if (ads->common.bytes[0] & SESCTL_CSEL) {
enc->status[i][0] = 0;
enc->status[i][1] =
ads->bytes[0] & 0x02;
enc->status[i][2] =
ads->bytes[1] & (0x80 | SESCTL_RQSID);
enc->status[i][3] =
ads->bytes[2] & SESCTL_RQSFLT;
ahci_em_setleds(dev, i);
} else if (ads0->common.bytes[0] & SESCTL_CSEL) {
enc->status[i][0] = 0;
enc->status[i][1] =
ads0->bytes[0] & 0x02;
enc->status[i][2] =
ads0->bytes[1] & (0x80 | SESCTL_RQSID);
enc->status[i][3] =
ads0->bytes[2] & SESCTL_RQSFLT;
ahci_em_setleds(dev, i);
}
}
ccb->ccb_h.status = CAM_REQ_CMP;
goto out;
}
/* SEMB RECEIVE DIAGNOSTIC RESULT (7) */
if (ccb->ataio.cmd.lba_low == 0x02 &&
ccb->ataio.cmd.features == 0x07 &&
ccb->ataio.cmd.sector_count >= (3 + 3 * enc->channels)) {
bzero(buf, ccb->ataio.dxfer_len);
page->hdr.page_code = 0x07;
scsi_ulto2b(4 + 4 + 12 * enc->channels,
page->hdr.length);
for (i = 0; i < enc->channels; i++) {
elmd = (struct ses_elm_desc_hdr *)&buf[8 + 4 + 12 * i];
scsi_ulto2b(8, elmd->length);
snprintf((char *)(elmd + 1), 9, "SLOT %03d", i);
}
ccb->ccb_h.status = CAM_REQ_CMP;
goto out;
}
ccb->ccb_h.status = CAM_REQ_INVALID;
out:
xpt_done(ccb);
}
static void hpt_action(struct cam_sim *sim, union ccb *ccb)
{
PVBUS_EXT vbus_ext = (PVBUS_EXT)cam_sim_softc(sim);
KdPrint(("hpt_action(fn=%d, id=%d)", ccb->ccb_h.func_code, ccb->ccb_h.target_id));
switch (ccb->ccb_h.func_code) {
case XPT_SCSI_IO:
hpt_lock_vbus(vbus_ext);
hpt_scsi_io(vbus_ext, ccb);
hpt_unlock_vbus(vbus_ext);
return;
case XPT_RESET_BUS:
hpt_lock_vbus(vbus_ext);
ldm_reset_vbus((PVBUS)vbus_ext->vbus);
hpt_unlock_vbus(vbus_ext);
break;
case XPT_GET_TRAN_SETTINGS:
case XPT_SET_TRAN_SETTINGS:
ccb->ccb_h.status = CAM_FUNC_NOTAVAIL;
break;
case XPT_CALC_GEOMETRY:
ccb->ccg.heads = 255;
ccb->ccg.secs_per_track = 63;
ccb->ccg.cylinders = ccb->ccg.volume_size / (ccb->ccg.heads * ccb->ccg.secs_per_track);
ccb->ccb_h.status = CAM_REQ_CMP;
break;
case XPT_PATH_INQ:
{
struct ccb_pathinq *cpi = &ccb->cpi;
cpi->version_num = 1;
cpi->hba_inquiry = PI_SDTR_ABLE;
cpi->target_sprt = 0;
cpi->hba_misc = PIM_NOBUSRESET;
cpi->hba_eng_cnt = 0;
cpi->max_target = osm_max_targets;
cpi->max_lun = 0;
cpi->unit_number = cam_sim_unit(sim);
cpi->bus_id = cam_sim_bus(sim);
cpi->initiator_id = osm_max_targets;
cpi->base_transfer_speed = 3300;
strncpy(cpi->sim_vid, "FreeBSD", SIM_IDLEN);
strncpy(cpi->hba_vid, "HPT ", HBA_IDLEN);
strncpy(cpi->dev_name, cam_sim_name(sim), DEV_IDLEN);
cpi->transport = XPORT_SPI;
cpi->transport_version = 2;
cpi->protocol = PROTO_SCSI;
cpi->protocol_version = SCSI_REV_2;
cpi->maxio = HPT27XX_DFLTPHYS;
cpi->ccb_h.status = CAM_REQ_CMP;
break;
}
default:
ccb->ccb_h.status = CAM_REQ_INVALID;
break;
}
xpt_done(ccb);
return;
}
static void
ic_action(struct cam_sim *sim, union ccb *ccb)
{
isc_session_t *sp = cam_sim_softc(sim);
struct ccb_hdr *ccb_h = &ccb->ccb_h;
debug_called(8);
ccb_h->spriv_ptr0 = sp;
sdebug(4, "func_code=0x%x flags=0x%x status=0x%x target=%d lun=%d retry_count=%d timeout=%d",
ccb_h->func_code, ccb->ccb_h.flags, ccb->ccb_h.status,
ccb->ccb_h.target_id, ccb->ccb_h.target_lun,
ccb->ccb_h.retry_count, ccb_h->timeout);
if(sp == NULL) {
xdebug("sp == NULL! cannot happen");
return;
}
switch(ccb_h->func_code) {
case XPT_PATH_INQ:
_inq(sim, ccb);
break;
case XPT_RESET_BUS: // (can just be a stub that does nothing and completes)
{
struct ccb_pathinq *cpi = &ccb->cpi;
debug(3, "XPT_RESET_BUS");
cpi->ccb_h.status = CAM_REQ_CMP;
break;
}
case XPT_SCSI_IO:
{
struct ccb_scsiio* csio = &ccb->csio;
debug(4, "XPT_SCSI_IO cmd=0x%x", csio->cdb_io.cdb_bytes[0]);
if(sp == NULL) {
ccb_h->status = CAM_REQ_INVALID; //CAM_NO_NEXUS;
debug(4, "xpt_done.status=%d", ccb_h->status);
break;
}
if(ccb_h->target_lun == CAM_LUN_WILDCARD) {
debug(3, "target=%d: bad lun (-1)", ccb_h->target_id);
ccb_h->status = CAM_LUN_INVALID;
break;
}
if(_scsi_encap(sim, ccb) != 0)
return;
break;
}
case XPT_CALC_GEOMETRY:
{
struct ccb_calc_geometry *ccg;
ccg = &ccb->ccg;
debug(4, "sid=%d target=%d lun=%d XPT_CALC_GEOMETRY vsize=%jd bsize=%d",
sp->sid, ccb->ccb_h.target_id, ccb->ccb_h.target_lun,
ccg->volume_size, ccg->block_size);
if(ccg->block_size == 0 ||
(ccg->volume_size < ccg->block_size)) {
// print error message ...
/* XXX: what error is appropiate? */
break;
}
else {
int lun, *off, boff;
lun = ccb->ccb_h.target_lun;
if(lun > ISCSI_MAX_LUNS) {
// XXX:
xdebug("lun %d > ISCSI_MAX_LUNS!\n", lun);
lun %= ISCSI_MAX_LUNS;
}
off = &sp->target_lun[lun / (sizeof(int)*8)];
boff = BIT(lun % (sizeof(int)*8));
debug(4, "sp->target_nluns=%d *off=%x boff=%x",
sp->target_nluns, *off, boff);
if((*off & boff) == 0) {
sp->target_nluns++;
*off |= boff;
}
cam_calc_geometry(ccg, /*extended*/1);
}
break;
}
case XPT_GET_TRAN_SETTINGS:
default:
ccb_h->status = CAM_REQ_INVALID;
break;
}
#if __FreeBSD_version < 700000
XPT_DONE(sp, ccb);
#else
xpt_done(ccb);
#endif
return;
}
static void
ata_cam_end_transaction(device_t dev, struct ata_request *request)
{
struct ata_channel *ch = device_get_softc(dev);
union ccb *ccb = request->ccb;
int fatalerr = 0;
if (ch->requestsense) {
ata_cam_process_sense(dev, request);
return;
}
ccb->ccb_h.status &= ~CAM_STATUS_MASK;
if (request->flags & ATA_R_TIMEOUT) {
xpt_freeze_simq(ch->sim, 1);
ccb->ccb_h.status &= ~CAM_STATUS_MASK;
ccb->ccb_h.status |= CAM_CMD_TIMEOUT | CAM_RELEASE_SIMQ;
fatalerr = 1;
} else if (request->status & ATA_S_ERROR) {
if (ccb->ccb_h.func_code == XPT_ATA_IO) {
ccb->ccb_h.status |= CAM_ATA_STATUS_ERROR;
} else {
ccb->ccb_h.status |= CAM_SCSI_STATUS_ERROR;
ccb->csio.scsi_status = SCSI_STATUS_CHECK_COND;
}
} else if (request->result == ERESTART)
ccb->ccb_h.status |= CAM_REQUEUE_REQ;
else if (request->result != 0)
ccb->ccb_h.status |= CAM_REQ_CMP_ERR;
else
ccb->ccb_h.status |= CAM_REQ_CMP;
if ((ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP &&
!(ccb->ccb_h.status & CAM_DEV_QFRZN)) {
xpt_freeze_devq(ccb->ccb_h.path, 1);
ccb->ccb_h.status |= CAM_DEV_QFRZN;
}
if (ccb->ccb_h.func_code == XPT_ATA_IO &&
((request->status & ATA_S_ERROR) ||
(ccb->ataio.cmd.flags & CAM_ATAIO_NEEDRESULT))) {
struct ata_res *res = &ccb->ataio.res;
res->status = request->status;
res->error = request->error;
res->lba_low = request->u.ata.lba;
res->lba_mid = request->u.ata.lba >> 8;
res->lba_high = request->u.ata.lba >> 16;
res->device = request->u.ata.lba >> 24;
res->lba_low_exp = request->u.ata.lba >> 24;
res->lba_mid_exp = request->u.ata.lba >> 32;
res->lba_high_exp = request->u.ata.lba >> 40;
res->sector_count = request->u.ata.count;
res->sector_count_exp = request->u.ata.count >> 8;
}
if ((ccb->ccb_h.flags & CAM_DIR_MASK) != CAM_DIR_NONE) {
if (ccb->ccb_h.func_code == XPT_ATA_IO) {
ccb->ataio.resid =
ccb->ataio.dxfer_len - request->donecount;
} else {
ccb->csio.resid =
ccb->csio.dxfer_len - request->donecount;
}
}
if ((ccb->ccb_h.status & CAM_STATUS_MASK) == CAM_SCSI_STATUS_ERROR &&
(ccb->ccb_h.flags & CAM_DIS_AUTOSENSE) == 0)
ata_cam_request_sense(dev, request);
else
xpt_done(ccb);
/* Do error recovery if needed. */
if (fatalerr)
ata_reinit(dev);
}
/**
* mrsas_action: SIM callback entry point
* input: pointer to SIM
* pointer to CAM Control Block
*
* This function processes CAM subsystem requests. The type of request is
* stored in ccb->ccb_h.func_code. The preprocessor #ifdef is necessary
* because ccb->cpi.maxio is not supported for FreeBSD version 7.4 or
* earlier.
*/
static void mrsas_action(struct cam_sim *sim, union ccb *ccb)
{
struct mrsas_softc *sc = (struct mrsas_softc *)cam_sim_softc(sim);
struct ccb_hdr *ccb_h = &(ccb->ccb_h);
u_int32_t device_id;
switch (ccb->ccb_h.func_code) {
case XPT_SCSI_IO:
{
device_id = ccb_h->target_id;
/*
* bus 0 is LD, bus 1 is for system-PD
*/
if (cam_sim_bus(sim) == 1 &&
sc->pd_list[device_id].driveState != MR_PD_STATE_SYSTEM) {
ccb->ccb_h.status |= CAM_DEV_NOT_THERE;
xpt_done(ccb);
}
else {
if (mrsas_startio(sc, sim, ccb)){
ccb->ccb_h.status |= CAM_REQ_INVALID;
xpt_done(ccb);
}
}
break;
}
case XPT_ABORT:
{
ccb->ccb_h.status = CAM_UA_ABORT;
xpt_done(ccb);
break;
}
case XPT_RESET_BUS:
{
xpt_done(ccb);
break;
}
case XPT_GET_TRAN_SETTINGS:
{
ccb->cts.protocol = PROTO_SCSI;
ccb->cts.protocol_version = SCSI_REV_2;
ccb->cts.transport = XPORT_SPI;
ccb->cts.transport_version = 2;
ccb->cts.xport_specific.spi.valid = CTS_SPI_VALID_DISC;
ccb->cts.xport_specific.spi.flags = CTS_SPI_FLAGS_DISC_ENB;
ccb->cts.proto_specific.scsi.valid = CTS_SCSI_VALID_TQ;
ccb->cts.proto_specific.scsi.flags = CTS_SCSI_FLAGS_TAG_ENB;
ccb->ccb_h.status = CAM_REQ_CMP;
xpt_done(ccb);
break;
}
case XPT_SET_TRAN_SETTINGS:
{
ccb->ccb_h.status = CAM_FUNC_NOTAVAIL;
xpt_done(ccb);
break;
}
case XPT_CALC_GEOMETRY:
{
cam_calc_geometry(&ccb->ccg, 1);
xpt_done(ccb);
break;
}
case XPT_PATH_INQ:
{
ccb->cpi.version_num = 1;
ccb->cpi.hba_inquiry = 0;
ccb->cpi.target_sprt = 0;
ccb->cpi.hba_misc = 0;
ccb->cpi.hba_eng_cnt = 0;
ccb->cpi.max_lun = MRSAS_SCSI_MAX_LUNS;
ccb->cpi.unit_number = cam_sim_unit(sim);
ccb->cpi.bus_id = cam_sim_bus(sim);
ccb->cpi.initiator_id = MRSAS_SCSI_INITIATOR_ID;
ccb->cpi.base_transfer_speed = 150000;
strncpy(ccb->cpi.sim_vid, "FreeBSD", SIM_IDLEN);
strncpy(ccb->cpi.hba_vid, "LSI", HBA_IDLEN);
strncpy(ccb->cpi.dev_name, cam_sim_name(sim), DEV_IDLEN);
ccb->cpi.transport = XPORT_SPI;
ccb->cpi.transport_version = 2;
ccb->cpi.protocol = PROTO_SCSI;
ccb->cpi.protocol_version = SCSI_REV_2;
if (ccb->cpi.bus_id == 0)
ccb->cpi.max_target = MRSAS_MAX_LD-1;
else
ccb->cpi.max_target = MRSAS_MAX_PD-1;
ccb->cpi.maxio = MRSAS_MAX_IO_SIZE;
ccb->ccb_h.status = CAM_REQ_CMP;
xpt_done(ccb);
break;
}
default:
{
ccb->ccb_h.status = CAM_REQ_INVALID;
xpt_done(ccb);
break;
}
}
}
static void
tws_action(struct cam_sim *sim, union ccb *ccb)
{
struct tws_softc *sc = (struct tws_softc *)cam_sim_softc(sim);
switch( ccb->ccb_h.func_code ) {
case XPT_SCSI_IO:
{
if ( tws_execute_scsi(sc, ccb) )
TWS_TRACE_DEBUG(sc, "execute scsi failed", 0, 0);
break;
}
case XPT_ABORT:
{
TWS_TRACE_DEBUG(sc, "abort i/o", 0, 0);
ccb->ccb_h.status = CAM_UA_ABORT;
xpt_done(ccb);
break;
}
case XPT_RESET_BUS:
{
TWS_TRACE_DEBUG(sc, "reset bus", sim, ccb);
break;
}
case XPT_SET_TRAN_SETTINGS:
{
TWS_TRACE_DEBUG(sc, "set tran settings", sim, ccb);
ccb->ccb_h.status = CAM_FUNC_NOTAVAIL;
xpt_done(ccb);
break;
}
case XPT_GET_TRAN_SETTINGS:
{
TWS_TRACE_DEBUG(sc, "get tran settings", sim, ccb);
#if (__FreeBSD_version >= 700000 )
ccb->cts.protocol = PROTO_SCSI;
ccb->cts.protocol_version = SCSI_REV_2;
ccb->cts.transport = XPORT_SPI;
ccb->cts.transport_version = 2;
ccb->cts.xport_specific.spi.valid = CTS_SPI_VALID_DISC;
ccb->cts.xport_specific.spi.flags = CTS_SPI_FLAGS_DISC_ENB;
ccb->cts.proto_specific.scsi.valid = CTS_SCSI_VALID_TQ;
ccb->cts.proto_specific.scsi.flags = CTS_SCSI_FLAGS_TAG_ENB;
#else
ccb->cts.valid = (CCB_TRANS_DISC_VALID | CCB_TRANS_TQ_VALID);
ccb->cts.flags &= ~(CCB_TRANS_DISC_ENB | CCB_TRANS_TAG_ENB);
#endif
ccb->ccb_h.status = CAM_REQ_CMP;
xpt_done(ccb);
break;
}
case XPT_CALC_GEOMETRY:
{
TWS_TRACE_DEBUG(sc, "calc geometry(ccb,block-size)", ccb,
ccb->ccg.block_size);
cam_calc_geometry(&ccb->ccg, 1/* extended */);
xpt_done(ccb);
break;
}
case XPT_PATH_INQ:
{
TWS_TRACE_DEBUG(sc, "path inquiry", sim, ccb);
ccb->cpi.version_num = 1;
ccb->cpi.hba_inquiry = 0;
ccb->cpi.target_sprt = 0;
ccb->cpi.hba_misc = 0;
ccb->cpi.hba_eng_cnt = 0;
ccb->cpi.max_target = TWS_MAX_NUM_UNITS;
ccb->cpi.max_lun = TWS_MAX_NUM_LUNS - 1;
ccb->cpi.unit_number = cam_sim_unit(sim);
ccb->cpi.bus_id = cam_sim_bus(sim);
ccb->cpi.initiator_id = TWS_SCSI_INITIATOR_ID;
ccb->cpi.base_transfer_speed = 6000000;
strncpy(ccb->cpi.sim_vid, "FreeBSD", SIM_IDLEN);
strncpy(ccb->cpi.hba_vid, "3ware", HBA_IDLEN);
strncpy(ccb->cpi.dev_name, cam_sim_name(sim), DEV_IDLEN);
#if (__FreeBSD_version >= 700000 )
ccb->cpi.transport = XPORT_SPI;
ccb->cpi.transport_version = 2;
ccb->cpi.protocol = PROTO_SCSI;
ccb->cpi.protocol_version = SCSI_REV_2;
ccb->cpi.maxio = TWS_MAX_IO_SIZE;
#endif
ccb->ccb_h.status = CAM_REQ_CMP;
xpt_done(ccb);
break;
}
default:
TWS_TRACE_DEBUG(sc, "default", sim, ccb);
ccb->ccb_h.status = CAM_REQ_INVALID;
xpt_done(ccb);
break;
}
}
static void
mfip_cam_action(struct cam_sim *sim, union ccb *ccb)
{
struct mfip_softc *sc = cam_sim_softc(sim);
struct mfi_softc *mfisc = sc->mfi_sc;
mfi_lockassert(&mfisc->mfi_io_lock);
switch (ccb->ccb_h.func_code) {
case XPT_PATH_INQ:
{
struct ccb_pathinq *cpi = &ccb->cpi;
cpi->version_num = 1;
cpi->hba_inquiry = PI_SDTR_ABLE|PI_TAG_ABLE|PI_WIDE_16;
cpi->target_sprt = 0;
cpi->hba_misc = PIM_NOBUSRESET|PIM_SEQSCAN;
cpi->hba_eng_cnt = 0;
cpi->max_target = MFI_SCSI_MAX_TARGETS;
cpi->max_lun = MFI_SCSI_MAX_LUNS;
cpi->initiator_id = MFI_SCSI_INITIATOR_ID;
strncpy(cpi->sim_vid, "FreeBSD", SIM_IDLEN);
strncpy(cpi->hba_vid, "LSI", HBA_IDLEN);
strncpy(cpi->dev_name, cam_sim_name(sim), DEV_IDLEN);
cpi->unit_number = cam_sim_unit(sim);
cpi->bus_id = cam_sim_bus(sim);
cpi->base_transfer_speed = 150000;
cpi->transport = XPORT_SAS;
cpi->transport_version = 0;
cpi->protocol = PROTO_SCSI;
cpi->protocol_version = SCSI_REV_2;
cpi->ccb_h.status = CAM_REQ_CMP;
break;
}
case XPT_RESET_BUS:
ccb->ccb_h.status = CAM_REQ_CMP;
break;
case XPT_RESET_DEV:
ccb->ccb_h.status = CAM_REQ_CMP;
break;
case XPT_GET_TRAN_SETTINGS:
{
struct ccb_trans_settings_sas *sas =
&ccb->cts.xport_specific.sas;
ccb->cts.protocol = PROTO_SCSI;
ccb->cts.protocol_version = SCSI_REV_2;
ccb->cts.transport = XPORT_SAS;
ccb->cts.transport_version = 0;
sas->valid &= ~CTS_SAS_VALID_SPEED;
sas->bitrate = 150000;
ccb->ccb_h.status = CAM_REQ_CMP;
break;
}
case XPT_SET_TRAN_SETTINGS:
ccb->ccb_h.status = CAM_FUNC_NOTAVAIL;
break;
case XPT_SCSI_IO:
{
struct ccb_hdr *ccbh = &ccb->ccb_h;
struct ccb_scsiio *csio = &ccb->csio;
ccbh->status = CAM_REQ_INPROG;
if (csio->cdb_len > MFI_SCSI_MAX_CDB_LEN) {
ccbh->status = CAM_REQ_INVALID;
break;
}
if ((ccbh->flags & CAM_DIR_MASK) != CAM_DIR_NONE) {
if (ccbh->flags & CAM_DATA_PHYS) {
ccbh->status = CAM_REQ_INVALID;
break;
}
if (ccbh->flags & CAM_SCATTER_VALID) {
ccbh->status = CAM_REQ_INVALID;
break;
}
}
ccbh->ccb_mfip_ptr = sc;
TAILQ_INSERT_TAIL(&mfisc->mfi_cam_ccbq, ccbh, sim_links.tqe);
mfi_startio(mfisc);
return;
}
default:
ccb->ccb_h.status = CAM_REQ_INVALID;
break;
}
xpt_done(ccb);
return;
}
static void
mfip_done(struct mfi_command *cm)
{
union ccb *ccb = cm->cm_private;
struct ccb_hdr *ccbh = &ccb->ccb_h;
struct ccb_scsiio *csio = &ccb->csio;
struct mfi_pass_frame *pt;
pt = &cm->cm_frame->pass;
switch (pt->header.cmd_status) {
case MFI_STAT_OK:
{
uint8_t command, device;
ccbh->status = CAM_REQ_CMP;
csio->scsi_status = pt->header.scsi_status;
if (ccbh->flags & CAM_CDB_POINTER)
command = csio->cdb_io.cdb_ptr[0];
else
command = csio->cdb_io.cdb_bytes[0];
if (command == INQUIRY) {
device = csio->data_ptr[0] & 0x1f;
if ((device == T_DIRECT) || (device == T_PROCESSOR))
csio->data_ptr[0] =
(csio->data_ptr[0] & 0xe0) | T_NODEVICE;
}
break;
}
case MFI_STAT_SCSI_DONE_WITH_ERROR:
{
int sense_len;
ccbh->status = CAM_SCSI_STATUS_ERROR | CAM_AUTOSNS_VALID;
csio->scsi_status = pt->header.scsi_status;
if (pt->header.sense_len < csio->sense_len)
csio->sense_resid = csio->sense_len -
pt->header.sense_len;
else
csio->sense_resid = 0;
sense_len = min(pt->header.sense_len,
sizeof(struct scsi_sense_data));
bzero(&csio->sense_data, sizeof(struct scsi_sense_data));
bcopy(&cm->cm_sense->data[0], &csio->sense_data, sense_len);
break;
}
case MFI_STAT_DEVICE_NOT_FOUND:
ccbh->status = CAM_SEL_TIMEOUT;
break;
case MFI_STAT_SCSI_IO_FAILED:
ccbh->status = CAM_REQ_CMP_ERR;
csio->scsi_status = pt->header.scsi_status;
break;
default:
ccbh->status = CAM_REQ_CMP_ERR;
csio->scsi_status = pt->header.scsi_status;
break;
}
mfi_release_command(cm);
xpt_done(ccb);
}
void
isci_task_request_complete(SCI_CONTROLLER_HANDLE_T scif_controller,
SCI_REMOTE_DEVICE_HANDLE_T remote_device,
SCI_TASK_REQUEST_HANDLE_T task_request, SCI_TASK_STATUS completion_status)
{
struct ISCI_TASK_REQUEST *isci_task_request =
(struct ISCI_TASK_REQUEST *)sci_object_get_association(task_request);
struct ISCI_CONTROLLER *isci_controller =
(struct ISCI_CONTROLLER *)sci_object_get_association(scif_controller);
struct ISCI_REMOTE_DEVICE *isci_remote_device =
(struct ISCI_REMOTE_DEVICE *)sci_object_get_association(remote_device);
struct ISCI_REMOTE_DEVICE *pending_remote_device;
BOOL retry_task = FALSE;
union ccb *ccb = isci_task_request->ccb;
isci_remote_device->is_resetting = FALSE;
switch ((int)completion_status) {
case SCI_TASK_SUCCESS:
case SCI_TASK_FAILURE_RESPONSE_VALID:
break;
case SCI_TASK_FAILURE_INVALID_STATE:
retry_task = TRUE;
isci_log_message(0, "ISCI",
"task failure (invalid state) - retrying\n");
break;
case SCI_TASK_FAILURE_INSUFFICIENT_RESOURCES:
retry_task = TRUE;
isci_log_message(0, "ISCI",
"task failure (insufficient resources) - retrying\n");
break;
case SCI_FAILURE_TIMEOUT:
if (isci_controller->fail_on_task_timeout) {
retry_task = FALSE;
isci_log_message(0, "ISCI",
"task timeout - not retrying\n");
scif_cb_domain_device_removed(isci_controller,
isci_remote_device->domain, isci_remote_device);
} else {
retry_task = TRUE;
isci_log_message(0, "ISCI",
"task timeout - retrying\n");
}
break;
case SCI_TASK_FAILURE:
case SCI_TASK_FAILURE_UNSUPPORTED_PROTOCOL:
case SCI_TASK_FAILURE_INVALID_TAG:
case SCI_TASK_FAILURE_CONTROLLER_SPECIFIC_ERR:
case SCI_TASK_FAILURE_TERMINATED:
case SCI_TASK_FAILURE_INVALID_PARAMETER_VALUE:
isci_log_message(0, "ISCI",
"unhandled task completion code 0x%x\n", completion_status);
break;
default:
isci_log_message(0, "ISCI",
"unhandled task completion code 0x%x\n", completion_status);
break;
}
if (isci_controller->is_frozen == TRUE) {
isci_controller->is_frozen = FALSE;
xpt_release_simq(isci_controller->sim, TRUE);
}
sci_pool_put(isci_controller->request_pool,
(struct ISCI_REQUEST *)isci_task_request);
/* Make sure we release the device queue, since it may have been frozen
* if someone tried to start an I/O while the task was in progress.
*/
isci_remote_device_release_device_queue(isci_remote_device);
if (retry_task == TRUE)
isci_remote_device_reset(isci_remote_device, ccb);
else {
pending_remote_device = sci_fast_list_remove_head(
&isci_controller->pending_device_reset_list);
if (pending_remote_device != NULL) {
/* Any resets that were triggered from an XPT_RESET_DEV
* CCB are never put in the pending list if the request
* pool is empty - they are given back to CAM to be
* requeued. So we will alawys pass NULL here,
* denoting that there is no CCB associated with the
* device reset.
*/
isci_remote_device_reset(pending_remote_device, NULL);
} else if (ccb != NULL) {
/* There was a CCB associated with this reset, so mark
* it complete and return it to CAM.
*/
ccb->ccb_h.status &= ~CAM_STATUS_MASK;
ccb->ccb_h.status |= CAM_REQ_CMP;
xpt_done(ccb);
}
}
}
void isci_action(struct cam_sim *sim, union ccb *ccb)
{
struct ISCI_CONTROLLER *controller =
(struct ISCI_CONTROLLER *)cam_sim_softc(sim);
switch ( ccb->ccb_h.func_code ) {
case XPT_PATH_INQ:
{
struct ccb_pathinq *cpi = &ccb->cpi;
int bus = cam_sim_bus(sim);
ccb->ccb_h.ccb_sim_ptr = sim;
cpi->version_num = 1;
cpi->hba_inquiry = PI_TAG_ABLE;
cpi->target_sprt = 0;
cpi->hba_misc = PIM_NOBUSRESET | PIM_SEQSCAN;
cpi->hba_eng_cnt = 0;
cpi->max_target = SCI_MAX_REMOTE_DEVICES - 1;
cpi->max_lun = ISCI_MAX_LUN;
#if __FreeBSD_version >= 800102
cpi->maxio = isci_io_request_get_max_io_size();
#endif
cpi->unit_number = cam_sim_unit(sim);
cpi->bus_id = bus;
cpi->initiator_id = SCI_MAX_REMOTE_DEVICES;
cpi->base_transfer_speed = 300000;
strncpy(cpi->sim_vid, "FreeBSD", SIM_IDLEN);
strncpy(cpi->hba_vid, "Intel Corp.", HBA_IDLEN);
strncpy(cpi->dev_name, cam_sim_name(sim), DEV_IDLEN);
cpi->transport = XPORT_SAS;
cpi->transport_version = 0;
cpi->protocol = PROTO_SCSI;
cpi->protocol_version = SCSI_REV_SPC2;
cpi->ccb_h.status = CAM_REQ_CMP;
xpt_done(ccb);
}
break;
case XPT_GET_TRAN_SETTINGS:
{
struct ccb_trans_settings *general_settings = &ccb->cts;
struct ccb_trans_settings_sas *sas_settings =
&general_settings->xport_specific.sas;
struct ccb_trans_settings_scsi *scsi_settings =
&general_settings->proto_specific.scsi;
struct ISCI_REMOTE_DEVICE *remote_device;
remote_device = controller->remote_device[ccb->ccb_h.target_id];
if (remote_device == NULL) {
ccb->ccb_h.status &= ~CAM_SIM_QUEUED;
ccb->ccb_h.status &= ~CAM_STATUS_MASK;
ccb->ccb_h.status |= CAM_DEV_NOT_THERE;
xpt_done(ccb);
break;
}
general_settings->protocol = PROTO_SCSI;
general_settings->transport = XPORT_SAS;
general_settings->protocol_version = SCSI_REV_SPC2;
general_settings->transport_version = 0;
scsi_settings->valid = CTS_SCSI_VALID_TQ;
scsi_settings->flags = CTS_SCSI_FLAGS_TAG_ENB;
ccb->ccb_h.status &= ~CAM_STATUS_MASK;
ccb->ccb_h.status |= CAM_REQ_CMP;
sas_settings->bitrate =
isci_remote_device_get_bitrate(remote_device);
if (sas_settings->bitrate != 0)
sas_settings->valid = CTS_SAS_VALID_SPEED;
xpt_done(ccb);
}
break;
case XPT_SCSI_IO:
isci_io_request_execute_scsi_io(ccb, controller);
break;
#if __FreeBSD_version >= 900026
case XPT_SMP_IO:
isci_io_request_execute_smp_io(ccb, controller);
break;
#endif
case XPT_SET_TRAN_SETTINGS:
ccb->ccb_h.status &= ~CAM_STATUS_MASK;
ccb->ccb_h.status |= CAM_REQ_CMP;
xpt_done(ccb);
break;
case XPT_CALC_GEOMETRY:
cam_calc_geometry(&ccb->ccg, /*extended*/1);
xpt_done(ccb);
break;
case XPT_RESET_DEV:
{
struct ISCI_REMOTE_DEVICE *remote_device =
controller->remote_device[ccb->ccb_h.target_id];
if (remote_device != NULL)
isci_remote_device_reset(remote_device, ccb);
else {
ccb->ccb_h.status &= ~CAM_SIM_QUEUED;
ccb->ccb_h.status &= ~CAM_STATUS_MASK;
ccb->ccb_h.status |= CAM_DEV_NOT_THERE;
xpt_done(ccb);
}
}
break;
case XPT_RESET_BUS:
ccb->ccb_h.status = CAM_REQ_CMP;
xpt_done(ccb);
break;
default:
isci_log_message(0, "ISCI", "Unhandled func_code 0x%x\n",
ccb->ccb_h.func_code);
ccb->ccb_h.status &= ~CAM_SIM_QUEUED;
ccb->ccb_h.status &= ~CAM_STATUS_MASK;
ccb->ccb_h.status |= CAM_REQ_INVALID;
xpt_done(ccb);
break;
}
}
static void
adv_execute_ccb(void *arg, bus_dma_segment_t *dm_segs,
int nsegments, int error)
{
struct ccb_scsiio *csio;
struct ccb_hdr *ccb_h;
struct cam_sim *sim;
struct adv_softc *adv;
struct adv_ccb_info *cinfo;
struct adv_scsi_q scsiq;
struct adv_sg_head sghead;
csio = (struct ccb_scsiio *)arg;
ccb_h = &csio->ccb_h;
sim = xpt_path_sim(ccb_h->path);
adv = (struct adv_softc *)cam_sim_softc(sim);
cinfo = (struct adv_ccb_info *)csio->ccb_h.ccb_cinfo_ptr;
if (!dumping)
mtx_assert(&adv->lock, MA_OWNED);
/*
* Setup our done routine to release the simq on
* the next ccb that completes.
*/
if ((adv->state & ADV_BUSDMA_BLOCK) != 0)
adv->state |= ADV_BUSDMA_BLOCK_CLEARED;
if ((ccb_h->flags & CAM_CDB_POINTER) != 0) {
if ((ccb_h->flags & CAM_CDB_PHYS) == 0) {
/* XXX Need phystovirt!!!! */
/* How about pmap_kenter??? */
scsiq.cdbptr = csio->cdb_io.cdb_ptr;
} else {
scsiq.cdbptr = csio->cdb_io.cdb_ptr;
}
} else {
scsiq.cdbptr = csio->cdb_io.cdb_bytes;
}
/*
* Build up the request
*/
scsiq.q1.status = 0;
scsiq.q1.q_no = 0;
scsiq.q1.cntl = 0;
scsiq.q1.sg_queue_cnt = 0;
scsiq.q1.target_id = ADV_TID_TO_TARGET_MASK(ccb_h->target_id);
scsiq.q1.target_lun = ccb_h->target_lun;
scsiq.q1.sense_len = csio->sense_len;
scsiq.q1.extra_bytes = 0;
scsiq.q2.ccb_index = cinfo - adv->ccb_infos;
scsiq.q2.target_ix = ADV_TIDLUN_TO_IX(ccb_h->target_id,
ccb_h->target_lun);
scsiq.q2.flag = 0;
scsiq.q2.cdb_len = csio->cdb_len;
if ((ccb_h->flags & CAM_TAG_ACTION_VALID) != 0)
scsiq.q2.tag_code = csio->tag_action;
else
scsiq.q2.tag_code = 0;
scsiq.q2.vm_id = 0;
if (nsegments != 0) {
bus_dmasync_op_t op;
scsiq.q1.data_addr = dm_segs->ds_addr;
scsiq.q1.data_cnt = dm_segs->ds_len;
if (nsegments > 1) {
scsiq.q1.cntl |= QC_SG_HEAD;
sghead.entry_cnt
= sghead.entry_to_copy
= nsegments;
sghead.res = 0;
sghead.sg_list = adv_fixup_dmasegs(adv, dm_segs);
scsiq.sg_head = &sghead;
} else {
scsiq.sg_head = NULL;
}
if ((ccb_h->flags & CAM_DIR_MASK) == CAM_DIR_IN)
op = BUS_DMASYNC_PREREAD;
else
op = BUS_DMASYNC_PREWRITE;
bus_dmamap_sync(adv->buffer_dmat, cinfo->dmamap, op);
} else {
scsiq.q1.data_addr = 0;
scsiq.q1.data_cnt = 0;
scsiq.sg_head = NULL;
}
/*
* Last time we need to check if this SCB needs to
* be aborted.
*/
if (ccb_h->status != CAM_REQ_INPROG) {
if (nsegments != 0)
bus_dmamap_unload(adv->buffer_dmat, cinfo->dmamap);
adv_clear_state(adv, (union ccb *)csio);
adv_free_ccb_info(adv, cinfo);
xpt_done((union ccb *)csio);
return;
}
if (adv_execute_scsi_queue(adv, &scsiq, csio->dxfer_len) != 0) {
/* Temporary resource shortage */
adv_set_state(adv, ADV_RESOURCE_SHORTAGE);
if (nsegments != 0)
bus_dmamap_unload(adv->buffer_dmat, cinfo->dmamap);
csio->ccb_h.status = CAM_REQUEUE_REQ;
adv_clear_state(adv, (union ccb *)csio);
adv_free_ccb_info(adv, cinfo);
xpt_done((union ccb *)csio);
return;
}
cinfo->state |= ACCB_ACTIVE;
ccb_h->status |= CAM_SIM_QUEUED;
LIST_INSERT_HEAD(&adv->pending_ccbs, ccb_h, sim_links.le);
/* Schedule our timeout */
callout_reset(&cinfo->timer, ccb_h->timeout * hz /1000, adv_timeout,
csio);
}
static void
adv_action(struct cam_sim *sim, union ccb *ccb)
{
struct adv_softc *adv;
CAM_DEBUG(ccb->ccb_h.path, CAM_DEBUG_TRACE, ("adv_action\n"));
adv = (struct adv_softc *)cam_sim_softc(sim);
mtx_assert(&adv->lock, MA_OWNED);
switch (ccb->ccb_h.func_code) {
/* Common cases first */
case XPT_SCSI_IO: /* Execute the requested I/O operation */
{
struct ccb_hdr *ccb_h;
struct ccb_scsiio *csio;
struct adv_ccb_info *cinfo;
int error;
ccb_h = &ccb->ccb_h;
csio = &ccb->csio;
cinfo = adv_get_ccb_info(adv);
if (cinfo == NULL)
panic("XXX Handle CCB info error!!!");
ccb_h->ccb_cinfo_ptr = cinfo;
cinfo->ccb = ccb;
error = bus_dmamap_load_ccb(adv->buffer_dmat,
cinfo->dmamap,
ccb,
adv_execute_ccb,
csio, /*flags*/0);
if (error == EINPROGRESS) {
/*
* So as to maintain ordering, freeze the controller
* queue until our mapping is returned.
*/
adv_set_state(adv, ADV_BUSDMA_BLOCK);
}
break;
}
case XPT_RESET_DEV: /* Bus Device Reset the specified SCSI device */
case XPT_TARGET_IO: /* Execute target I/O request */
case XPT_ACCEPT_TARGET_IO: /* Accept Host Target Mode CDB */
case XPT_CONT_TARGET_IO: /* Continue Host Target I/O Connection*/
case XPT_EN_LUN: /* Enable LUN as a target */
case XPT_ABORT: /* Abort the specified CCB */
/* XXX Implement */
ccb->ccb_h.status = CAM_REQ_INVALID;
xpt_done(ccb);
break;
#define IS_CURRENT_SETTINGS(c) (c->type == CTS_TYPE_CURRENT_SETTINGS)
#define IS_USER_SETTINGS(c) (c->type == CTS_TYPE_USER_SETTINGS)
case XPT_SET_TRAN_SETTINGS:
{
struct ccb_trans_settings_scsi *scsi;
struct ccb_trans_settings_spi *spi;
struct ccb_trans_settings *cts;
target_bit_vector targ_mask;
struct adv_transinfo *tconf;
u_int update_type;
cts = &ccb->cts;
targ_mask = ADV_TID_TO_TARGET_MASK(cts->ccb_h.target_id);
update_type = 0;
/*
* The user must specify which type of settings he wishes
* to change.
*/
if (IS_CURRENT_SETTINGS(cts) && !IS_USER_SETTINGS(cts)) {
tconf = &adv->tinfo[cts->ccb_h.target_id].current;
update_type |= ADV_TRANS_GOAL;
} else if (IS_USER_SETTINGS(cts) && !IS_CURRENT_SETTINGS(cts)) {
tconf = &adv->tinfo[cts->ccb_h.target_id].user;
update_type |= ADV_TRANS_USER;
} else {
ccb->ccb_h.status = CAM_REQ_INVALID;
break;
}
scsi = &cts->proto_specific.scsi;
spi = &cts->xport_specific.spi;
if ((update_type & ADV_TRANS_GOAL) != 0) {
if ((spi->valid & CTS_SPI_VALID_DISC) != 0) {
if ((spi->flags & CTS_SPI_FLAGS_DISC_ENB) != 0)
adv->disc_enable |= targ_mask;
else
adv->disc_enable &= ~targ_mask;
adv_write_lram_8(adv, ADVV_DISC_ENABLE_B,
adv->disc_enable);
}
if ((scsi->valid & CTS_SCSI_VALID_TQ) != 0) {
if ((scsi->flags & CTS_SCSI_FLAGS_TAG_ENB) != 0)
adv->cmd_qng_enabled |= targ_mask;
else
adv->cmd_qng_enabled &= ~targ_mask;
}
}
if ((update_type & ADV_TRANS_USER) != 0) {
if ((spi->valid & CTS_SPI_VALID_DISC) != 0) {
if ((spi->flags & CTS_SPI_VALID_DISC) != 0)
adv->user_disc_enable |= targ_mask;
else
adv->user_disc_enable &= ~targ_mask;
}
if ((scsi->valid & CTS_SCSI_VALID_TQ) != 0) {
if ((scsi->flags & CTS_SCSI_FLAGS_TAG_ENB) != 0)
adv->user_cmd_qng_enabled |= targ_mask;
else
adv->user_cmd_qng_enabled &= ~targ_mask;
}
}
/*
* If the user specifies either the sync rate, or offset,
* but not both, the unspecified parameter defaults to its
* current value in transfer negotiations.
*/
if (((spi->valid & CTS_SPI_VALID_SYNC_RATE) != 0)
|| ((spi->valid & CTS_SPI_VALID_SYNC_OFFSET) != 0)) {
/*
* If the user provided a sync rate but no offset,
* use the current offset.
*/
if ((spi->valid & CTS_SPI_VALID_SYNC_OFFSET) == 0)
spi->sync_offset = tconf->offset;
/*
* If the user provided an offset but no sync rate,
* use the current sync rate.
*/
if ((spi->valid & CTS_SPI_VALID_SYNC_RATE) == 0)
spi->sync_period = tconf->period;
adv_period_offset_to_sdtr(adv, &spi->sync_period,
&spi->sync_offset,
cts->ccb_h.target_id);
adv_set_syncrate(adv, /*struct cam_path */NULL,
cts->ccb_h.target_id, spi->sync_period,
spi->sync_offset, update_type);
}
ccb->ccb_h.status = CAM_REQ_CMP;
xpt_done(ccb);
break;
}
case XPT_GET_TRAN_SETTINGS:
/* Get default/user set transfer settings for the target */
{
struct ccb_trans_settings_scsi *scsi;
struct ccb_trans_settings_spi *spi;
struct ccb_trans_settings *cts;
struct adv_transinfo *tconf;
target_bit_vector target_mask;
cts = &ccb->cts;
target_mask = ADV_TID_TO_TARGET_MASK(cts->ccb_h.target_id);
scsi = &cts->proto_specific.scsi;
spi = &cts->xport_specific.spi;
cts->protocol = PROTO_SCSI;
cts->protocol_version = SCSI_REV_2;
cts->transport = XPORT_SPI;
cts->transport_version = 2;
scsi->flags &= ~CTS_SCSI_FLAGS_TAG_ENB;
spi->flags &= ~CTS_SPI_FLAGS_DISC_ENB;
if (cts->type == CTS_TYPE_CURRENT_SETTINGS) {
tconf = &adv->tinfo[cts->ccb_h.target_id].current;
if ((adv->disc_enable & target_mask) != 0)
spi->flags |= CTS_SPI_FLAGS_DISC_ENB;
if ((adv->cmd_qng_enabled & target_mask) != 0)
scsi->flags |= CTS_SCSI_FLAGS_TAG_ENB;
} else {
tconf = &adv->tinfo[cts->ccb_h.target_id].user;
if ((adv->user_disc_enable & target_mask) != 0)
spi->flags |= CTS_SPI_FLAGS_DISC_ENB;
if ((adv->user_cmd_qng_enabled & target_mask) != 0)
scsi->flags |= CTS_SCSI_FLAGS_TAG_ENB;
}
spi->sync_period = tconf->period;
spi->sync_offset = tconf->offset;
spi->bus_width = MSG_EXT_WDTR_BUS_8_BIT;
spi->valid = CTS_SPI_VALID_SYNC_RATE
| CTS_SPI_VALID_SYNC_OFFSET
| CTS_SPI_VALID_BUS_WIDTH
| CTS_SPI_VALID_DISC;
scsi->valid = CTS_SCSI_VALID_TQ;
ccb->ccb_h.status = CAM_REQ_CMP;
xpt_done(ccb);
break;
}
case XPT_CALC_GEOMETRY:
{
int extended;
extended = (adv->control & ADV_CNTL_BIOS_GT_1GB) != 0;
cam_calc_geometry(&ccb->ccg, extended);
xpt_done(ccb);
break;
}
case XPT_RESET_BUS: /* Reset the specified SCSI bus */
{
adv_stop_execution(adv);
adv_reset_bus(adv, /*initiate_reset*/TRUE);
adv_start_execution(adv);
ccb->ccb_h.status = CAM_REQ_CMP;
xpt_done(ccb);
break;
}
case XPT_TERM_IO: /* Terminate the I/O process */
/* XXX Implement */
ccb->ccb_h.status = CAM_REQ_INVALID;
xpt_done(ccb);
break;
case XPT_PATH_INQ: /* Path routing inquiry */
{
struct ccb_pathinq *cpi = &ccb->cpi;
cpi->version_num = 1; /* XXX??? */
cpi->hba_inquiry = PI_SDTR_ABLE|PI_TAG_ABLE;
cpi->target_sprt = 0;
cpi->hba_misc = 0;
cpi->hba_eng_cnt = 0;
cpi->max_target = 7;
cpi->max_lun = 7;
cpi->initiator_id = adv->scsi_id;
cpi->bus_id = cam_sim_bus(sim);
cpi->base_transfer_speed = 3300;
strncpy(cpi->sim_vid, "FreeBSD", SIM_IDLEN);
strncpy(cpi->hba_vid, "Advansys", HBA_IDLEN);
strncpy(cpi->dev_name, cam_sim_name(sim), DEV_IDLEN);
cpi->unit_number = cam_sim_unit(sim);
cpi->ccb_h.status = CAM_REQ_CMP;
cpi->transport = XPORT_SPI;
cpi->transport_version = 2;
cpi->protocol = PROTO_SCSI;
cpi->protocol_version = SCSI_REV_2;
xpt_done(ccb);
break;
}
default:
ccb->ccb_h.status = CAM_REQ_INVALID;
xpt_done(ccb);
break;
}
}
void
adv_done(struct adv_softc *adv, union ccb *ccb, u_int done_stat,
u_int host_stat, u_int scsi_status, u_int q_no)
{
struct adv_ccb_info *cinfo;
if (!dumping)
mtx_assert(&adv->lock, MA_OWNED);
cinfo = (struct adv_ccb_info *)ccb->ccb_h.ccb_cinfo_ptr;
LIST_REMOVE(&ccb->ccb_h, sim_links.le);
callout_stop(&cinfo->timer);
if ((ccb->ccb_h.flags & CAM_DIR_MASK) != CAM_DIR_NONE) {
bus_dmasync_op_t op;
if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_IN)
op = BUS_DMASYNC_POSTREAD;
else
op = BUS_DMASYNC_POSTWRITE;
bus_dmamap_sync(adv->buffer_dmat, cinfo->dmamap, op);
bus_dmamap_unload(adv->buffer_dmat, cinfo->dmamap);
}
switch (done_stat) {
case QD_NO_ERROR:
if (host_stat == QHSTA_NO_ERROR) {
ccb->ccb_h.status = CAM_REQ_CMP;
break;
}
xpt_print_path(ccb->ccb_h.path);
printf("adv_done - queue done without error, "
"but host status non-zero(%x)\n", host_stat);
/*FALLTHROUGH*/
case QD_WITH_ERROR:
switch (host_stat) {
case QHSTA_M_TARGET_STATUS_BUSY:
case QHSTA_M_BAD_QUEUE_FULL_OR_BUSY:
/*
* Assume that if we were a tagged transaction
* the target reported queue full. Otherwise,
* report busy. The firmware really should just
* pass the original status back up to us even
* if it thinks the target was in error for
* returning this status as no other transactions
* from this initiator are in effect, but this
* ignores multi-initiator setups and there is
* evidence that the firmware gets its per-device
* transaction counts screwed up occassionally.
*/
ccb->ccb_h.status |= CAM_SCSI_STATUS_ERROR;
if ((ccb->ccb_h.flags & CAM_TAG_ACTION_VALID) != 0
&& host_stat != QHSTA_M_TARGET_STATUS_BUSY)
scsi_status = SCSI_STATUS_QUEUE_FULL;
else
scsi_status = SCSI_STATUS_BUSY;
adv_abort_ccb(adv, ccb->ccb_h.target_id,
ccb->ccb_h.target_lun,
/*ccb*/NULL, CAM_REQUEUE_REQ,
/*queued_only*/TRUE);
/*FALLTHROUGH*/
case QHSTA_M_NO_AUTO_REQ_SENSE:
case QHSTA_NO_ERROR:
ccb->csio.scsi_status = scsi_status;
switch (scsi_status) {
case SCSI_STATUS_CHECK_COND:
case SCSI_STATUS_CMD_TERMINATED:
ccb->ccb_h.status |= CAM_AUTOSNS_VALID;
/* Structure copy */
ccb->csio.sense_data =
adv->sense_buffers[q_no - 1];
/* FALLTHROUGH */
case SCSI_STATUS_BUSY:
case SCSI_STATUS_RESERV_CONFLICT:
case SCSI_STATUS_QUEUE_FULL:
case SCSI_STATUS_COND_MET:
case SCSI_STATUS_INTERMED:
case SCSI_STATUS_INTERMED_COND_MET:
ccb->ccb_h.status |= CAM_SCSI_STATUS_ERROR;
break;
case SCSI_STATUS_OK:
ccb->ccb_h.status |= CAM_REQ_CMP;
break;
}
break;
case QHSTA_M_SEL_TIMEOUT:
ccb->ccb_h.status = CAM_SEL_TIMEOUT;
break;
case QHSTA_M_DATA_OVER_RUN:
ccb->ccb_h.status = CAM_DATA_RUN_ERR;
break;
case QHSTA_M_UNEXPECTED_BUS_FREE:
ccb->ccb_h.status = CAM_UNEXP_BUSFREE;
break;
case QHSTA_M_BAD_BUS_PHASE_SEQ:
ccb->ccb_h.status = CAM_SEQUENCE_FAIL;
break;
case QHSTA_M_BAD_CMPL_STATUS_IN:
/* No command complete after a status message */
ccb->ccb_h.status = CAM_SEQUENCE_FAIL;
break;
case QHSTA_D_EXE_SCSI_Q_BUSY_TIMEOUT:
case QHSTA_M_WTM_TIMEOUT:
case QHSTA_M_HUNG_REQ_SCSI_BUS_RESET:
/* The SCSI bus hung in a phase */
ccb->ccb_h.status = CAM_SEQUENCE_FAIL;
adv_reset_bus(adv, /*initiate_reset*/TRUE);
break;
case QHSTA_M_AUTO_REQ_SENSE_FAIL:
ccb->ccb_h.status = CAM_AUTOSENSE_FAIL;
break;
case QHSTA_D_QDONE_SG_LIST_CORRUPTED:
case QHSTA_D_ASC_DVC_ERROR_CODE_SET:
case QHSTA_D_HOST_ABORT_FAILED:
case QHSTA_D_EXE_SCSI_Q_FAILED:
case QHSTA_D_ASPI_NO_BUF_POOL:
case QHSTA_M_BAD_TAG_CODE:
case QHSTA_D_LRAM_CMP_ERROR:
case QHSTA_M_MICRO_CODE_ERROR_HALT:
default:
panic("%s: Unhandled Host status error %x",
device_get_nameunit(adv->dev), host_stat);
/* NOTREACHED */
}
break;
case QD_ABORTED_BY_HOST:
/* Don't clobber any, more explicit, error codes we've set */
if ((ccb->ccb_h.status & CAM_STATUS_MASK) == CAM_REQ_INPROG)
ccb->ccb_h.status = CAM_REQ_ABORTED;
break;
default:
xpt_print_path(ccb->ccb_h.path);
printf("adv_done - queue done with unknown status %x:%x\n",
done_stat, host_stat);
ccb->ccb_h.status = CAM_REQ_CMP_ERR;
break;
}
adv_clear_state(adv, ccb);
if ((ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP
&& (ccb->ccb_h.status & CAM_DEV_QFRZN) == 0) {
xpt_freeze_devq(ccb->ccb_h.path, /*count*/1);
ccb->ccb_h.status |= CAM_DEV_QFRZN;
}
adv_free_ccb_info(adv, cinfo);
/*
* Null this out so that we catch driver bugs that cause a
* ccb to be completed twice.
*/
ccb->ccb_h.ccb_cinfo_ptr = NULL;
ccb->ccb_h.status &= ~CAM_SIM_QUEUED;
xpt_done(ccb);
}
/*
* Function name: tw_osl_complete_io
* Description: Called to complete CAM scsi requests.
*
* Input: req_handle -- ptr to request handle
* Output: None
* Return value: None
*/
TW_VOID
tw_osl_complete_io(struct tw_cl_req_handle *req_handle)
{
struct tw_osli_req_context *req = req_handle->osl_req_ctxt;
struct tw_cl_req_packet *req_pkt =
(struct tw_cl_req_packet *)(&req->req_pkt);
struct tw_cl_scsi_req_packet *scsi_req;
struct twa_softc *sc = req->ctlr;
union ccb *ccb = (union ccb *)(req->orig_req);
tw_osli_dbg_dprintf(10, sc, "entering");
if (req->state != TW_OSLI_REQ_STATE_BUSY)
tw_osli_printf(sc, "request = %p, status = %d",
TW_CL_SEVERITY_ERROR_STRING,
TW_CL_MESSAGE_SOURCE_FREEBSD_DRIVER,
0x210A,
"Unposted command completed!!",
req, req->state);
/*
* Remove request from the busy queue. Just mark it complete.
* There's no need to move it into the complete queue as we are
* going to be done with it right now.
*/
req->state = TW_OSLI_REQ_STATE_COMPLETE;
tw_osli_req_q_remove_item(req, TW_OSLI_BUSY_Q);
tw_osli_unmap_request(req);
req->deadline = 0;
if (req->error_code) {
/* This request never got submitted to the firmware. */
if (req->error_code == EBUSY) {
/*
* Cmd queue is full, or the Common Layer is out of
* resources. The simq will already have been frozen.
* When this ccb gets completed will unfreeze the simq.
*/
ccb->ccb_h.status |= CAM_REQUEUE_REQ;
}
else if (req->error_code == EFBIG)
ccb->ccb_h.status = CAM_REQ_TOO_BIG;
else
ccb->ccb_h.status = CAM_REQ_CMP_ERR;
} else {
scsi_req = &(req_pkt->gen_req_pkt.scsi_req);
if (req_pkt->status == TW_CL_ERR_REQ_SUCCESS)
ccb->ccb_h.status = CAM_REQ_CMP;
else {
if (req_pkt->status & TW_CL_ERR_REQ_INVALID_TARGET)
ccb->ccb_h.status |= CAM_SEL_TIMEOUT;
else if (req_pkt->status & TW_CL_ERR_REQ_INVALID_LUN)
ccb->ccb_h.status |= CAM_DEV_NOT_THERE;
else if (req_pkt->status & TW_CL_ERR_REQ_SCSI_ERROR)
ccb->ccb_h.status |= CAM_SCSI_STATUS_ERROR;
else if (req_pkt->status & TW_CL_ERR_REQ_BUS_RESET)
ccb->ccb_h.status |= (CAM_REQUEUE_REQ | CAM_SCSI_BUS_RESET);
/*
* If none of the above errors occurred, simply
* mark completion error.
*/
if (ccb->ccb_h.status == 0)
ccb->ccb_h.status = CAM_REQ_CMP_ERR;
if (req_pkt->status & TW_CL_ERR_REQ_AUTO_SENSE_VALID) {
ccb->csio.sense_len = scsi_req->sense_len;
ccb->ccb_h.status |= CAM_AUTOSNS_VALID;
}
}
ccb->csio.scsi_status = scsi_req->scsi_status;
}
ccb->ccb_h.status &= ~CAM_SIM_QUEUED;
lockmgr(sc->sim_lock, LK_EXCLUSIVE);
xpt_done(ccb);
lockmgr(sc->sim_lock, LK_RELEASE);
if (! req->error_code)
/* twa_action will free the request otherwise */
tw_osli_req_q_insert_tail(req, TW_OSLI_FREE_Q);
}
static void
vpo_action(struct cam_sim *sim, union ccb *ccb)
{
struct vpo_data *vpo = (struct vpo_data *)sim->softc;
switch (ccb->ccb_h.func_code) {
case XPT_SCSI_IO:
{
struct ccb_scsiio *csio;
csio = &ccb->csio;
#ifdef VP0_DEBUG
printf("vpo%d: XPT_SCSI_IO (0x%x) request\n",
vpo->vpo_unit, csio->cdb_io.cdb_bytes[0]);
#endif
vpo_intr(vpo, csio);
xpt_done(ccb);
break;
}
case XPT_CALC_GEOMETRY:
{
struct ccb_calc_geometry *ccg;
ccg = &ccb->ccg;
#ifdef VP0_DEBUG
printf("vpo%d: XPT_CALC_GEOMETRY (bs=%d,vs=%d,c=%d,h=%d,spt=%d) request\n",
vpo->vpo_unit,
ccg->block_size,
ccg->volume_size,
ccg->cylinders,
ccg->heads,
ccg->secs_per_track);
#endif
ccg->heads = 64;
ccg->secs_per_track = 32;
ccg->cylinders = ccg->volume_size /
(ccg->heads * ccg->secs_per_track);
ccb->ccb_h.status = CAM_REQ_CMP;
xpt_done(ccb);
break;
}
case XPT_RESET_BUS: /* Reset the specified SCSI bus */
{
#ifdef VP0_DEBUG
printf("vpo%d: XPT_RESET_BUS request\n", vpo->vpo_unit);
#endif
if (vpo->vpo_isplus) {
if (imm_reset_bus(&vpo->vpo_io)) {
ccb->ccb_h.status = CAM_REQ_CMP_ERR;
xpt_done(ccb);
return;
}
} else {
if (vpoio_reset_bus(&vpo->vpo_io)) {
ccb->ccb_h.status = CAM_REQ_CMP_ERR;
xpt_done(ccb);
return;
}
}
ccb->ccb_h.status = CAM_REQ_CMP;
xpt_done(ccb);
break;
}
case XPT_PATH_INQ: /* Path routing inquiry */
{
struct ccb_pathinq *cpi = &ccb->cpi;
#ifdef VP0_DEBUG
printf("vpo%d: XPT_PATH_INQ request\n", vpo->vpo_unit);
#endif
cpi->version_num = 1; /* XXX??? */
cpi->hba_inquiry = 0;
cpi->target_sprt = 0;
cpi->hba_misc = 0;
cpi->hba_eng_cnt = 0;
cpi->max_target = 7;
cpi->max_lun = 0;
cpi->initiator_id = VP0_INITIATOR;
cpi->bus_id = sim->bus_id;
cpi->base_transfer_speed = 93;
strncpy(cpi->sim_vid, "FreeBSD", SIM_IDLEN);
strncpy(cpi->hba_vid, "Iomega", HBA_IDLEN);
strncpy(cpi->dev_name, sim->sim_name, DEV_IDLEN);
cpi->unit_number = sim->unit_number;
cpi->ccb_h.status = CAM_REQ_CMP;
xpt_done(ccb);
break;
}
default:
ccb->ccb_h.status = CAM_REQ_INVALID;
xpt_done(ccb);
break;
}
return;
}
void
cfcs_action(struct cam_sim *sim, union ccb *ccb)
{
struct cfcs_softc *softc;
int err;
softc = (struct cfcs_softc *)cam_sim_softc(sim);
mtx_assert(&softc->lock, MA_OWNED);
switch (ccb->ccb_h.func_code) {
case XPT_SCSI_IO: {
union ctl_io *io;
struct ccb_scsiio *csio;
csio = &ccb->csio;
/*
* Catch CCB flags, like physical address flags, that
* indicate situations we currently can't handle.
*/
if (ccb->ccb_h.flags & CFCS_BAD_CCB_FLAGS) {
ccb->ccb_h.status = CAM_REQ_INVALID;
printf("%s: bad CCB flags %#x (all flags %#x)\n",
__func__, ccb->ccb_h.flags & CFCS_BAD_CCB_FLAGS,
ccb->ccb_h.flags);
xpt_done(ccb);
return;
}
/*
* If we aren't online, there are no devices to see.
*/
if (softc->online == 0) {
ccb->ccb_h.status = CAM_DEV_NOT_THERE;
xpt_done(ccb);
return;
}
io = ctl_alloc_io_nowait(softc->port.ctl_pool_ref);
if (io == NULL) {
printf("%s: can't allocate ctl_io\n", __func__);
ccb->ccb_h.status = CAM_BUSY | CAM_DEV_QFRZN;
xpt_freeze_devq(ccb->ccb_h.path, 1);
xpt_done(ccb);
return;
}
ctl_zero_io(io);
/* Save pointers on both sides */
io->io_hdr.ctl_private[CTL_PRIV_FRONTEND].ptr = ccb;
ccb->ccb_h.io_ptr = io;
/*
* Only SCSI I/O comes down this path, resets, etc. come
* down via the XPT_RESET_BUS/LUN CCBs below.
*/
io->io_hdr.io_type = CTL_IO_SCSI;
io->io_hdr.nexus.initid.id = 1;
io->io_hdr.nexus.targ_port = softc->port.targ_port;
/*
* XXX KDM how do we handle target IDs?
*/
io->io_hdr.nexus.targ_target.id = ccb->ccb_h.target_id;
io->io_hdr.nexus.targ_lun = ccb->ccb_h.target_lun;
/*
* This tag scheme isn't the best, since we could in theory
* have a very long-lived I/O and tag collision, especially
* in a high I/O environment. But it should work well
* enough for now. Since we're using unsigned ints,
* they'll just wrap around.
*/
io->scsiio.tag_num = softc->cur_tag_num++;
csio->tag_id = io->scsiio.tag_num;
switch (csio->tag_action) {
case CAM_TAG_ACTION_NONE:
io->scsiio.tag_type = CTL_TAG_UNTAGGED;
break;
case MSG_SIMPLE_TASK:
io->scsiio.tag_type = CTL_TAG_SIMPLE;
break;
case MSG_HEAD_OF_QUEUE_TASK:
io->scsiio.tag_type = CTL_TAG_HEAD_OF_QUEUE;
break;
case MSG_ORDERED_TASK:
io->scsiio.tag_type = CTL_TAG_ORDERED;
break;
case MSG_ACA_TASK:
io->scsiio.tag_type = CTL_TAG_ACA;
break;
default:
io->scsiio.tag_type = CTL_TAG_UNTAGGED;
printf("%s: unhandled tag type %#x!!\n", __func__,
csio->tag_action);
break;
}
if (csio->cdb_len > sizeof(io->scsiio.cdb)) {
printf("%s: WARNING: CDB len %d > ctl_io space %zd\n",
__func__, csio->cdb_len, sizeof(io->scsiio.cdb));
}
io->scsiio.cdb_len = min(csio->cdb_len, sizeof(io->scsiio.cdb));
bcopy(csio->cdb_io.cdb_bytes, io->scsiio.cdb,
io->scsiio.cdb_len);
ccb->ccb_h.status |= CAM_SIM_QUEUED;
err = ctl_queue(io);
if (err != CTL_RETVAL_COMPLETE) {
printf("%s: func %d: error %d returned by "
"ctl_queue()!\n", __func__,
ccb->ccb_h.func_code, err);
ctl_free_io(io);
ccb->ccb_h.status = CAM_REQ_INVALID;
xpt_done(ccb);
return;
}
break;
}
case XPT_ABORT: {
union ctl_io *io;
union ccb *abort_ccb;
abort_ccb = ccb->cab.abort_ccb;
if (abort_ccb->ccb_h.func_code != XPT_SCSI_IO) {
ccb->ccb_h.status = CAM_REQ_INVALID;
xpt_done(ccb);
}
/*
* If we aren't online, there are no devices to talk to.
*/
if (softc->online == 0) {
ccb->ccb_h.status = CAM_DEV_NOT_THERE;
xpt_done(ccb);
return;
}
io = ctl_alloc_io_nowait(softc->port.ctl_pool_ref);
if (io == NULL) {
ccb->ccb_h.status = CAM_BUSY | CAM_DEV_QFRZN;
xpt_freeze_devq(ccb->ccb_h.path, 1);
xpt_done(ccb);
return;
}
ctl_zero_io(io);
/* Save pointers on both sides */
io->io_hdr.ctl_private[CTL_PRIV_FRONTEND].ptr = ccb;
ccb->ccb_h.io_ptr = io;
io->io_hdr.io_type = CTL_IO_TASK;
io->io_hdr.nexus.initid.id = 1;
io->io_hdr.nexus.targ_port = softc->port.targ_port;
io->io_hdr.nexus.targ_target.id = ccb->ccb_h.target_id;
io->io_hdr.nexus.targ_lun = ccb->ccb_h.target_lun;
io->taskio.task_action = CTL_TASK_ABORT_TASK;
io->taskio.tag_num = abort_ccb->csio.tag_id;
switch (abort_ccb->csio.tag_action) {
case CAM_TAG_ACTION_NONE:
io->taskio.tag_type = CTL_TAG_UNTAGGED;
break;
case MSG_SIMPLE_TASK:
io->taskio.tag_type = CTL_TAG_SIMPLE;
break;
case MSG_HEAD_OF_QUEUE_TASK:
io->taskio.tag_type = CTL_TAG_HEAD_OF_QUEUE;
break;
case MSG_ORDERED_TASK:
io->taskio.tag_type = CTL_TAG_ORDERED;
break;
case MSG_ACA_TASK:
io->taskio.tag_type = CTL_TAG_ACA;
break;
default:
io->taskio.tag_type = CTL_TAG_UNTAGGED;
printf("%s: unhandled tag type %#x!!\n", __func__,
abort_ccb->csio.tag_action);
break;
}
err = ctl_queue(io);
if (err != CTL_RETVAL_COMPLETE) {
printf("%s func %d: error %d returned by "
"ctl_queue()!\n", __func__,
ccb->ccb_h.func_code, err);
ctl_free_io(io);
}
break;
}
case XPT_GET_TRAN_SETTINGS: {
struct ccb_trans_settings *cts;
struct ccb_trans_settings_scsi *scsi;
struct ccb_trans_settings_fc *fc;
cts = &ccb->cts;
scsi = &cts->proto_specific.scsi;
fc = &cts->xport_specific.fc;
cts->protocol = PROTO_SCSI;
cts->protocol_version = SCSI_REV_SPC2;
cts->transport = XPORT_FC;
cts->transport_version = 0;
scsi->valid = CTS_SCSI_VALID_TQ;
scsi->flags = CTS_SCSI_FLAGS_TAG_ENB;
fc->valid = CTS_FC_VALID_SPEED;
fc->bitrate = 800000;
fc->wwnn = softc->wwnn;
fc->wwpn = softc->wwpn;
fc->port = softc->port.targ_port;
fc->valid |= CTS_FC_VALID_WWNN | CTS_FC_VALID_WWPN |
CTS_FC_VALID_PORT;
ccb->ccb_h.status = CAM_REQ_CMP;
break;
}
case XPT_SET_TRAN_SETTINGS:
/* XXX KDM should we actually do something here? */
ccb->ccb_h.status = CAM_REQ_CMP;
break;
case XPT_RESET_BUS:
case XPT_RESET_DEV: {
union ctl_io *io;
/*
* If we aren't online, there are no devices to talk to.
*/
if (softc->online == 0) {
ccb->ccb_h.status = CAM_DEV_NOT_THERE;
xpt_done(ccb);
return;
}
io = ctl_alloc_io_nowait(softc->port.ctl_pool_ref);
if (io == NULL) {
ccb->ccb_h.status = CAM_BUSY | CAM_DEV_QFRZN;
xpt_freeze_devq(ccb->ccb_h.path, 1);
xpt_done(ccb);
return;
}
ctl_zero_io(io);
/* Save pointers on both sides */
if (ccb->ccb_h.func_code == XPT_RESET_DEV)
io->io_hdr.ctl_private[CTL_PRIV_FRONTEND].ptr = ccb;
ccb->ccb_h.io_ptr = io;
io->io_hdr.io_type = CTL_IO_TASK;
io->io_hdr.nexus.initid.id = 0;
io->io_hdr.nexus.targ_port = softc->port.targ_port;
io->io_hdr.nexus.targ_target.id = ccb->ccb_h.target_id;
io->io_hdr.nexus.targ_lun = ccb->ccb_h.target_lun;
if (ccb->ccb_h.func_code == XPT_RESET_BUS)
io->taskio.task_action = CTL_TASK_BUS_RESET;
else
io->taskio.task_action = CTL_TASK_LUN_RESET;
err = ctl_queue(io);
if (err != CTL_RETVAL_COMPLETE) {
printf("%s func %d: error %d returned by "
"ctl_queue()!\n", __func__,
ccb->ccb_h.func_code, err);
ctl_free_io(io);
}
break;
}
case XPT_CALC_GEOMETRY:
cam_calc_geometry(&ccb->ccg, 1);
xpt_done(ccb);
break;
case XPT_PATH_INQ: {
struct ccb_pathinq *cpi;
cpi = &ccb->cpi;
cpi->version_num = 0;
cpi->hba_inquiry = PI_TAG_ABLE;
cpi->target_sprt = 0;
cpi->hba_misc = 0;
cpi->hba_eng_cnt = 0;
cpi->max_target = 1;
cpi->max_lun = 1024;
/* Do we really have a limit? */
cpi->maxio = 1024 * 1024;
cpi->async_flags = 0;
cpi->hpath_id = 0;
cpi->initiator_id = 0;
strncpy(cpi->sim_vid, "FreeBSD", SIM_IDLEN);
strncpy(cpi->hba_vid, "FreeBSD", HBA_IDLEN);
strncpy(cpi->dev_name, cam_sim_name(sim), DEV_IDLEN);
cpi->unit_number = 0;
cpi->bus_id = 0;
cpi->base_transfer_speed = 800000;
cpi->protocol = PROTO_SCSI;
cpi->protocol_version = SCSI_REV_SPC2;
/*
* Pretend to be Fibre Channel.
*/
cpi->transport = XPORT_FC;
cpi->transport_version = 0;
cpi->xport_specific.fc.wwnn = softc->wwnn;
cpi->xport_specific.fc.wwpn = softc->wwpn;
cpi->xport_specific.fc.port = softc->port.targ_port;
cpi->xport_specific.fc.bitrate = 8 * 1000 * 1000;
cpi->ccb_h.status = CAM_REQ_CMP;
break;
}
default:
ccb->ccb_h.status = CAM_PROVIDE_FAIL;
printf("%s: unsupported CCB type %#x\n", __func__,
ccb->ccb_h.func_code);
xpt_done(ccb);
break;
}
}
/*
* Action function - dispatch command
*/
static
void
sili_xpt_action(struct cam_sim *sim, union ccb *ccb)
{
struct sili_port *ap;
struct ata_port *at, *atx;
struct ccb_hdr *ccbh;
int unit;
/* XXX lock */
ap = cam_sim_softc(sim);
at = ap->ap_ata;
atx = NULL;
KKASSERT(ap != NULL);
ccbh = &ccb->ccb_h;
unit = cam_sim_unit(sim);
/*
* Early failure checks. These checks do not apply to XPT_PATH_INQ,
* otherwise the bus rescan will not remove the dead devices when
* unplugging a PM.
*
* For non-wildcards we have one target (0) and one lun (0),
* unless we have a port multiplier.
*
* A wildcard target indicates only the general bus is being
* probed.
*
* Calculate at and atx. at is always non-NULL. atx is only
* NULL for direct-attached devices. It will be non-NULL for
* devices behind a port multiplier.
*
* XXX What do we do with a LUN wildcard?
*/
if (ccbh->target_id != CAM_TARGET_WILDCARD &&
ccbh->func_code != XPT_PATH_INQ) {
if (ap->ap_type == ATA_PORT_T_NONE) {
ccbh->status = CAM_DEV_NOT_THERE;
xpt_done(ccb);
return;
}
if (ccbh->target_id < 0 || ccbh->target_id >= ap->ap_pmcount) {
ccbh->status = CAM_DEV_NOT_THERE;
xpt_done(ccb);
return;
}
at += ccbh->target_id;
if (ap->ap_type == ATA_PORT_T_PM)
atx = at;
if (ccbh->target_lun != CAM_LUN_WILDCARD && ccbh->target_lun) {
ccbh->status = CAM_DEV_NOT_THERE;
xpt_done(ccb);
return;
}
}
/*
* Switch on the meta XPT command
*/
switch(ccbh->func_code) {
case XPT_ENG_EXEC:
/*
* This routine is called after a port multiplier has been
* probed.
*/
ccbh->status = CAM_REQ_CMP;
sili_os_lock_port(ap);
sili_port_state_machine(ap, 0);
sili_os_unlock_port(ap);
xpt_done(ccb);
sili_xpt_rescan(ap);
break;
case XPT_PATH_INQ:
/*
* This command always succeeds, otherwise the bus scan
* will not detach dead devices.
*/
ccb->cpi.version_num = 1;
ccb->cpi.hba_inquiry = 0;
ccb->cpi.target_sprt = 0;
ccb->cpi.hba_misc = PIM_SEQSCAN;
ccb->cpi.hba_eng_cnt = 0;
bzero(ccb->cpi.vuhba_flags, sizeof(ccb->cpi.vuhba_flags));
ccb->cpi.max_target = SILI_MAX_PMPORTS - 1;
ccb->cpi.max_lun = 0;
ccb->cpi.async_flags = 0;
ccb->cpi.hpath_id = 0;
ccb->cpi.initiator_id = SILI_MAX_PMPORTS - 1;
ccb->cpi.unit_number = cam_sim_unit(sim);
ccb->cpi.bus_id = cam_sim_bus(sim);
ccb->cpi.base_transfer_speed = 150000;
ccb->cpi.transport = XPORT_SATA;
ccb->cpi.transport_version = 1;
ccb->cpi.protocol = PROTO_SCSI;
ccb->cpi.protocol_version = SCSI_REV_2;
ccbh->status = CAM_REQ_CMP;
if (ccbh->target_id == CAM_TARGET_WILDCARD) {
sili_os_lock_port(ap);
sili_port_state_machine(ap, 0);
sili_os_unlock_port(ap);
} else {
switch(sili_pread(ap, SILI_PREG_SSTS) &
SILI_PREG_SSTS_SPD) {
case SILI_PREG_SSTS_SPD_GEN1:
ccb->cpi.base_transfer_speed = 150000;
break;
case SILI_PREG_SSTS_SPD_GEN2:
ccb->cpi.base_transfer_speed = 300000;
break;
default:
/* unknown */
ccb->cpi.base_transfer_speed = 1000;
break;
}
#if 0
if (ap->ap_type == ATA_PORT_T_NONE)
ccbh->status = CAM_DEV_NOT_THERE;
#endif
}
xpt_done(ccb);
break;
case XPT_RESET_DEV:
sili_os_lock_port(ap);
if (ap->ap_type == ATA_PORT_T_NONE) {
ccbh->status = CAM_DEV_NOT_THERE;
} else {
sili_port_reset(ap, atx, 0);
ccbh->status = CAM_REQ_CMP;
}
sili_os_unlock_port(ap);
xpt_done(ccb);
break;
case XPT_RESET_BUS:
sili_os_lock_port(ap);
sili_port_reset(ap, NULL, 1);
sili_os_unlock_port(ap);
ccbh->status = CAM_REQ_CMP;
xpt_done(ccb);
break;
case XPT_SET_TRAN_SETTINGS:
ccbh->status = CAM_FUNC_NOTAVAIL;
xpt_done(ccb);
break;
case XPT_GET_TRAN_SETTINGS:
ccb->cts.protocol = PROTO_SCSI;
ccb->cts.protocol_version = SCSI_REV_2;
ccb->cts.transport = XPORT_SATA;
ccb->cts.transport_version = XPORT_VERSION_UNSPECIFIED;
ccb->cts.proto_specific.valid = 0;
ccb->cts.xport_specific.valid = 0;
ccbh->status = CAM_REQ_CMP;
xpt_done(ccb);
break;
case XPT_CALC_GEOMETRY:
cam_calc_geometry(&ccb->ccg, 1);
xpt_done(ccb);
break;
case XPT_SCSI_IO:
/*
* Our parallel startup code might have only probed through
* to the IDENT, so do the last step if necessary.
*/
if (at->at_probe == ATA_PROBE_NEED_IDENT)
sili_cam_probe(ap, atx);
if (at->at_probe != ATA_PROBE_GOOD) {
ccbh->status = CAM_DEV_NOT_THERE;
xpt_done(ccb);
break;
}
switch(at->at_type) {
case ATA_PORT_T_DISK:
sili_xpt_scsi_disk_io(ap, atx, ccb);
break;
case ATA_PORT_T_ATAPI:
sili_xpt_scsi_atapi_io(ap, atx, ccb);
break;
default:
ccbh->status = CAM_REQ_INVALID;
xpt_done(ccb);
break;
}
break;
default:
ccbh->status = CAM_REQ_INVALID;
xpt_done(ccb);
break;
}
}
/**
* mrsas_startio: SCSI IO entry point
* input: Adapter instance soft state
* pointer to CAM Control Block
*
* This function is the SCSI IO entry point and it initiates IO processing.
* It copies the IO and depending if the IO is read/write or inquiry, it would
* call mrsas_build_ldio() or mrsas_build_dcdb(), respectively. It returns
* 0 if the command is sent to firmware successfully, otherwise it returns 1.
*/
static int32_t mrsas_startio(struct mrsas_softc *sc, struct cam_sim *sim,
union ccb *ccb)
{
struct mrsas_mpt_cmd *cmd;
struct ccb_hdr *ccb_h = &(ccb->ccb_h);
struct ccb_scsiio *csio = &(ccb->csio);
MRSAS_REQUEST_DESCRIPTOR_UNION *req_desc;
if ((csio->cdb_io.cdb_bytes[0]) == SYNCHRONIZE_CACHE){
ccb->ccb_h.status = CAM_REQ_CMP;
xpt_done(ccb);
return(0);
}
ccb_h->status |= CAM_SIM_QUEUED;
cmd = mrsas_get_mpt_cmd(sc);
if (!cmd) {
ccb_h->status |= CAM_REQUEUE_REQ;
xpt_done(ccb);
return(0);
}
if ((ccb_h->flags & CAM_DIR_MASK) != CAM_DIR_NONE) {
if(ccb_h->flags & CAM_DIR_IN)
cmd->flags |= MRSAS_DIR_IN;
if(ccb_h->flags & CAM_DIR_OUT)
cmd->flags |= MRSAS_DIR_OUT;
}
else
cmd->flags = MRSAS_DIR_NONE; /* no data */
/* For FreeBSD 10.0 and higher */
#if 0 /* XXX (__FreeBSD_version >= 1000000) */
/*
* * XXX We don't yet support physical addresses here.
*/
switch ((ccb->ccb_h.flags & CAM_DATA_MASK)) {
case CAM_DATA_PADDR:
case CAM_DATA_SG_PADDR:
kprintf("%s: physical addresses not supported\n",
__func__);
mrsas_release_mpt_cmd(cmd);
ccb_h->status = CAM_REQ_INVALID;
ccb_h->status &= ~CAM_SIM_QUEUED;
goto done;
case CAM_DATA_SG:
kprintf("%s: scatter gather is not supported\n",
__func__);
mrsas_release_mpt_cmd(cmd);
ccb_h->status = CAM_REQ_INVALID;
goto done;
case CAM_DATA_VADDR:
if (csio->dxfer_len > MRSAS_MAX_IO_SIZE) {
mrsas_release_mpt_cmd(cmd);
ccb_h->status = CAM_REQ_TOO_BIG;
goto done;
}
cmd->length = csio->dxfer_len;
if (cmd->length)
cmd->data = csio->data_ptr;
break;
default:
ccb->ccb_h.status = CAM_REQ_INVALID;
goto done;
}
#else
if (!(ccb_h->flags & CAM_DATA_PHYS)) { //Virtual data address
if (!(ccb_h->flags & CAM_SCATTER_VALID)) {
if (csio->dxfer_len > MRSAS_MAX_IO_SIZE) {
mrsas_release_mpt_cmd(cmd);
ccb_h->status = CAM_REQ_TOO_BIG;
goto done;
}
cmd->length = csio->dxfer_len;
if (cmd->length)
cmd->data = csio->data_ptr;
}
else {
mrsas_release_mpt_cmd(cmd);
ccb_h->status = CAM_REQ_INVALID;
goto done;
}
}
else { //Data addresses are physical.
mrsas_release_mpt_cmd(cmd);
ccb_h->status = CAM_REQ_INVALID;
ccb_h->status &= ~CAM_SIM_QUEUED;
goto done;
}
#endif
/* save ccb ptr */
cmd->ccb_ptr = ccb;
req_desc = mrsas_get_request_desc(sc, (cmd->index)-1);
if (!req_desc) {
device_printf(sc->mrsas_dev, "Cannot get request_descriptor.\n");
return (FAIL);
}
memset(req_desc, 0, sizeof(MRSAS_REQUEST_DESCRIPTOR_UNION));
cmd->request_desc = req_desc;
if (ccb_h->flags & CAM_CDB_POINTER)
bcopy(csio->cdb_io.cdb_ptr, cmd->io_request->CDB.CDB32, csio->cdb_len);
else
bcopy(csio->cdb_io.cdb_bytes, cmd->io_request->CDB.CDB32, csio->cdb_len);
lockmgr(&sc->raidmap_lock, LK_EXCLUSIVE);
if (mrsas_ldio_inq(sim, ccb)) {
if (mrsas_build_ldio(sc, cmd, ccb)){
device_printf(sc->mrsas_dev, "Build LDIO failed.\n");
lockmgr(&sc->raidmap_lock, LK_RELEASE);
return(1);
}
}
else {
if (mrsas_build_dcdb(sc, cmd, ccb, sim)) {
device_printf(sc->mrsas_dev, "Build DCDB failed.\n");
lockmgr(&sc->raidmap_lock, LK_RELEASE);
return(1);
}
}
lockmgr(&sc->raidmap_lock, LK_RELEASE);
if (cmd->flags == MRSAS_DIR_IN) //from device
cmd->io_request->Control |= MPI2_SCSIIO_CONTROL_READ;
else if (cmd->flags == MRSAS_DIR_OUT) //to device
cmd->io_request->Control |= MPI2_SCSIIO_CONTROL_WRITE;
cmd->io_request->SGLFlags = MPI2_SGE_FLAGS_64_BIT_ADDRESSING;
cmd->io_request->SGLOffset0 = offsetof(MRSAS_RAID_SCSI_IO_REQUEST, SGL)/4;
cmd->io_request->SenseBufferLowAddress = cmd->sense_phys_addr;
cmd->io_request->SenseBufferLength = MRSAS_SCSI_SENSE_BUFFERSIZE;
req_desc = cmd->request_desc;
req_desc->SCSIIO.SMID = cmd->index;
/*
* Start timer for IO timeout. Default timeout value is 90 second.
*/
callout_reset(&cmd->cm_callout, (sc->mrsas_io_timeout * hz) / 1000,
mrsas_scsiio_timeout, cmd);
atomic_inc(&sc->fw_outstanding);
if(atomic_read(&sc->fw_outstanding) > sc->io_cmds_highwater)
sc->io_cmds_highwater++;
mrsas_fire_cmd(sc, req_desc->addr.u.low, req_desc->addr.u.high);
return(0);
done:
xpt_done(ccb);
return(0);
}
void
isci_io_request_complete(SCI_CONTROLLER_HANDLE_T scif_controller,
SCI_REMOTE_DEVICE_HANDLE_T remote_device,
struct ISCI_IO_REQUEST *isci_request, SCI_IO_STATUS completion_status)
{
struct ISCI_CONTROLLER *isci_controller;
struct ISCI_REMOTE_DEVICE *isci_remote_device;
union ccb *ccb;
BOOL complete_ccb;
complete_ccb = TRUE;
isci_controller = (struct ISCI_CONTROLLER *) sci_object_get_association(scif_controller);
isci_remote_device =
(struct ISCI_REMOTE_DEVICE *) sci_object_get_association(remote_device);
ccb = isci_request->ccb;
ccb->ccb_h.status &= ~CAM_STATUS_MASK;
switch (completion_status) {
case SCI_IO_SUCCESS:
case SCI_IO_SUCCESS_COMPLETE_BEFORE_START:
#if __FreeBSD_version >= 900026
if (ccb->ccb_h.func_code == XPT_SMP_IO) {
void *smp_response =
scif_io_request_get_response_iu_address(
isci_request->sci_object);
memcpy(ccb->smpio.smp_response, smp_response,
ccb->smpio.smp_response_len);
}
#endif
ccb->ccb_h.status |= CAM_REQ_CMP;
break;
case SCI_IO_SUCCESS_IO_DONE_EARLY:
ccb->ccb_h.status |= CAM_REQ_CMP;
ccb->csio.resid = ccb->csio.dxfer_len -
scif_io_request_get_number_of_bytes_transferred(
isci_request->sci_object);
break;
case SCI_IO_FAILURE_RESPONSE_VALID:
{
SCI_SSP_RESPONSE_IU_T * response_buffer;
uint32_t sense_length;
int error_code, sense_key, asc, ascq;
struct ccb_scsiio *csio = &ccb->csio;
response_buffer = (SCI_SSP_RESPONSE_IU_T *)
scif_io_request_get_response_iu_address(
isci_request->sci_object);
sense_length = sci_ssp_get_sense_data_length(
response_buffer->sense_data_length);
sense_length = MIN(csio->sense_len, sense_length);
memcpy(&csio->sense_data, response_buffer->data, sense_length);
csio->sense_resid = csio->sense_len - sense_length;
csio->scsi_status = response_buffer->status;
ccb->ccb_h.status |= CAM_SCSI_STATUS_ERROR;
ccb->ccb_h.status |= CAM_AUTOSNS_VALID;
scsi_extract_sense( &csio->sense_data, &error_code, &sense_key,
&asc, &ascq );
isci_log_message(1, "ISCI",
"isci: bus=%x target=%x lun=%x cdb[0]=%x status=%x key=%x asc=%x ascq=%x\n",
ccb->ccb_h.path_id, ccb->ccb_h.target_id,
ccb->ccb_h.target_lun, csio->cdb_io.cdb_bytes[0],
csio->scsi_status, sense_key, asc, ascq);
break;
}
case SCI_IO_FAILURE_REMOTE_DEVICE_RESET_REQUIRED:
isci_remote_device_reset(isci_remote_device, NULL);
ccb->ccb_h.status |= CAM_REQ_TERMIO;
isci_log_message(0, "ISCI",
"isci: bus=%x target=%x lun=%x cdb[0]=%x remote device reset required\n",
ccb->ccb_h.path_id, ccb->ccb_h.target_id,
ccb->ccb_h.target_lun, ccb->csio.cdb_io.cdb_bytes[0]);
break;
case SCI_IO_FAILURE_TERMINATED:
ccb->ccb_h.status |= CAM_REQ_TERMIO;
isci_log_message(0, "ISCI",
"isci: bus=%x target=%x lun=%x cdb[0]=%x terminated\n",
ccb->ccb_h.path_id, ccb->ccb_h.target_id,
ccb->ccb_h.target_lun, ccb->csio.cdb_io.cdb_bytes[0]);
break;
case SCI_IO_FAILURE_INVALID_STATE:
case SCI_IO_FAILURE_INSUFFICIENT_RESOURCES:
complete_ccb = FALSE;
break;
case SCI_IO_FAILURE_INVALID_REMOTE_DEVICE:
ccb->ccb_h.status |= CAM_DEV_NOT_THERE;
break;
case SCI_IO_FAILURE_NO_NCQ_TAG_AVAILABLE:
{
struct ccb_relsim ccb_relsim;
struct cam_path *path;
xpt_create_path(&path, NULL,
cam_sim_path(isci_controller->sim),
isci_remote_device->index, 0);
xpt_setup_ccb(&ccb_relsim.ccb_h, path, 5);
ccb_relsim.ccb_h.func_code = XPT_REL_SIMQ;
ccb_relsim.ccb_h.flags = CAM_DEV_QFREEZE;
ccb_relsim.release_flags = RELSIM_ADJUST_OPENINGS;
ccb_relsim.openings =
scif_remote_device_get_max_queue_depth(remote_device);
xpt_action((union ccb *)&ccb_relsim);
xpt_free_path(path);
complete_ccb = FALSE;
}
break;
case SCI_IO_FAILURE:
case SCI_IO_FAILURE_REQUIRES_SCSI_ABORT:
case SCI_IO_FAILURE_UNSUPPORTED_PROTOCOL:
case SCI_IO_FAILURE_PROTOCOL_VIOLATION:
case SCI_IO_FAILURE_INVALID_PARAMETER_VALUE:
case SCI_IO_FAILURE_CONTROLLER_SPECIFIC_ERR:
default:
isci_log_message(1, "ISCI",
"isci: bus=%x target=%x lun=%x cdb[0]=%x completion status=%x\n",
ccb->ccb_h.path_id, ccb->ccb_h.target_id,
ccb->ccb_h.target_lun, ccb->csio.cdb_io.cdb_bytes[0],
completion_status);
ccb->ccb_h.status |= CAM_REQ_CMP_ERR;
break;
}
callout_stop(&isci_request->parent.timer);
bus_dmamap_sync(isci_request->parent.dma_tag,
isci_request->parent.dma_map,
BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE);
bus_dmamap_unload(isci_request->parent.dma_tag,
isci_request->parent.dma_map);
isci_request->ccb = NULL;
sci_pool_put(isci_controller->request_pool,
(struct ISCI_REQUEST *)isci_request);
if (complete_ccb) {
if ((ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP) {
/* ccb will be completed with some type of non-success
* status. So temporarily freeze the queue until the
* upper layers can act on the status. The
* CAM_DEV_QFRZN flag will then release the queue
* after the status is acted upon.
*/
ccb->ccb_h.status |= CAM_DEV_QFRZN;
xpt_freeze_devq(ccb->ccb_h.path, 1);
}
if (ccb->ccb_h.status & CAM_SIM_QUEUED) {
KASSERT(ccb == isci_remote_device->queued_ccb_in_progress,
("multiple internally queued ccbs in flight"));
TAILQ_REMOVE(&isci_remote_device->queued_ccbs,
&ccb->ccb_h, sim_links.tqe);
ccb->ccb_h.status &= ~CAM_SIM_QUEUED;
/*
* This CCB that was in the queue was completed, so
* set the in_progress pointer to NULL denoting that
* we can retry another CCB from the queue. We only
* allow one CCB at a time from the queue to be
* in progress so that we can effectively maintain
* ordering.
*/
isci_remote_device->queued_ccb_in_progress = NULL;
}
if (isci_remote_device->frozen_lun_mask != 0) {
isci_remote_device_release_device_queue(isci_remote_device);
}
xpt_done(ccb);
if (isci_controller->is_frozen == TRUE) {
isci_controller->is_frozen = FALSE;
xpt_release_simq(isci_controller->sim, TRUE);
}
} else {
isci_remote_device_freeze_lun_queue(isci_remote_device,
ccb->ccb_h.target_lun);
if (ccb->ccb_h.status & CAM_SIM_QUEUED) {
KASSERT(ccb == isci_remote_device->queued_ccb_in_progress,
("multiple internally queued ccbs in flight"));
/*
* Do nothing, CCB is already on the device's queue.
* We leave it on the queue, to be retried again
* next time a CCB on this device completes, or we
* get a ready notification for this device.
*/
isci_log_message(1, "ISCI", "already queued %p %x\n",
ccb, ccb->csio.cdb_io.cdb_bytes[0]);
isci_remote_device->queued_ccb_in_progress = NULL;
} else {
isci_log_message(1, "ISCI", "queue %p %x\n", ccb,
ccb->csio.cdb_io.cdb_bytes[0]);
ccb->ccb_h.status |= CAM_SIM_QUEUED;
TAILQ_INSERT_TAIL(&isci_remote_device->queued_ccbs,
&ccb->ccb_h, sim_links.tqe);
}
}
}
static int32_t
tws_execute_scsi(struct tws_softc *sc, union ccb *ccb)
{
struct tws_command_packet *cmd_pkt;
struct tws_request *req;
struct ccb_hdr *ccb_h = &(ccb->ccb_h);
struct ccb_scsiio *csio = &(ccb->csio);
int error;
u_int16_t lun;
mtx_assert(&sc->sim_lock, MA_OWNED);
if (ccb_h->target_id >= TWS_MAX_NUM_UNITS) {
TWS_TRACE_DEBUG(sc, "traget id too big", ccb_h->target_id, ccb_h->target_lun);
ccb_h->status |= CAM_TID_INVALID;
xpt_done(ccb);
return(0);
}
if (ccb_h->target_lun >= TWS_MAX_NUM_LUNS) {
TWS_TRACE_DEBUG(sc, "target lun 2 big", ccb_h->target_id, ccb_h->target_lun);
ccb_h->status |= CAM_LUN_INVALID;
xpt_done(ccb);
return(0);
}
if(ccb_h->flags & CAM_CDB_PHYS) {
TWS_TRACE_DEBUG(sc, "cdb phy", ccb_h->target_id, ccb_h->target_lun);
ccb_h->status = CAM_REQ_INVALID;
xpt_done(ccb);
return(0);
}
/*
* We are going to work on this request. Mark it as enqueued (though
* we don't actually queue it...)
*/
ccb_h->status |= CAM_SIM_QUEUED;
req = tws_get_request(sc, TWS_REQ_TYPE_SCSI_IO);
if ( !req ) {
TWS_TRACE_DEBUG(sc, "no reqs", ccb_h->target_id, ccb_h->target_lun);
ccb_h->status |= CAM_REQUEUE_REQ;
xpt_done(ccb);
return(0);
}
if((ccb_h->flags & CAM_DIR_MASK) != CAM_DIR_NONE) {
if(ccb_h->flags & CAM_DIR_IN)
req->flags |= TWS_DIR_IN;
if(ccb_h->flags & CAM_DIR_OUT)
req->flags |= TWS_DIR_OUT;
} else {
req->flags = TWS_DIR_NONE; /* no data */
}
req->type = TWS_REQ_TYPE_SCSI_IO;
req->cb = tws_scsi_complete;
cmd_pkt = req->cmd_pkt;
/* cmd_pkt->hdr.header_desc.size_header = 128; */
cmd_pkt->cmd.pkt_a.res__opcode = TWS_FW_CMD_EXECUTE_SCSI;
cmd_pkt->cmd.pkt_a.unit = ccb_h->target_id;
cmd_pkt->cmd.pkt_a.status = 0;
cmd_pkt->cmd.pkt_a.sgl_offset = 16;
/* lower nibble */
lun = ccb_h->target_lun & 0XF;
lun = lun << 12;
cmd_pkt->cmd.pkt_a.lun_l4__req_id = lun | req->request_id;
/* upper nibble */
lun = ccb_h->target_lun & 0XF0;
lun = lun << 8;
cmd_pkt->cmd.pkt_a.lun_h4__sgl_entries = lun;
#ifdef TWS_DEBUG
if ( csio->cdb_len > 16 )
TWS_TRACE(sc, "cdb len too big", ccb_h->target_id, csio->cdb_len);
#endif
if(ccb_h->flags & CAM_CDB_POINTER)
bcopy(csio->cdb_io.cdb_ptr, cmd_pkt->cmd.pkt_a.cdb, csio->cdb_len);
else
bcopy(csio->cdb_io.cdb_bytes, cmd_pkt->cmd.pkt_a.cdb, csio->cdb_len);
req->data = ccb;
req->flags |= TWS_DATA_CCB;
/* save ccb ptr */
req->ccb_ptr = ccb;
/*
* tws_map_load_data_callback will fill in the SGL,
* and submit the I/O.
*/
sc->stats.scsi_ios++;
ccb_h->timeout_ch = timeout(tws_timeout, req, (ccb_h->timeout * hz)/1000);
error = tws_map_request(sc, req);
return(error);
}
void
isci_io_request_execute_smp_io(union ccb *ccb,
struct ISCI_CONTROLLER *controller)
{
SCI_STATUS status;
target_id_t target_id = ccb->ccb_h.target_id;
struct ISCI_REQUEST *request;
struct ISCI_IO_REQUEST *io_request;
SCI_REMOTE_DEVICE_HANDLE_T smp_device_handle;
struct ISCI_REMOTE_DEVICE *end_device = controller->remote_device[target_id];
/* SMP commands are sent to an end device, because SMP devices are not
* exposed to the kernel. It is our responsibility to use this method
* to get the SMP device that contains the specified end device. If
* the device is direct-attached, the handle will come back NULL, and
* we'll just fail the SMP_IO with DEV_NOT_THERE.
*/
scif_remote_device_get_containing_device(end_device->sci_object,
&smp_device_handle);
if (smp_device_handle == NULL) {
ccb->ccb_h.status &= ~CAM_SIM_QUEUED;
ccb->ccb_h.status &= ~CAM_STATUS_MASK;
ccb->ccb_h.status |= CAM_DEV_NOT_THERE;
xpt_done(ccb);
return;
}
if (sci_pool_empty(controller->request_pool)) {
ccb->ccb_h.status &= ~CAM_SIM_QUEUED;
ccb->ccb_h.status &= ~CAM_STATUS_MASK;
ccb->ccb_h.status |= CAM_REQUEUE_REQ;
xpt_freeze_simq(controller->sim, 1);
controller->is_frozen = TRUE;
xpt_done(ccb);
return;
}
ASSERT(device->is_resetting == FALSE);
sci_pool_get(controller->request_pool, request);
io_request = (struct ISCI_IO_REQUEST *)request;
io_request->ccb = ccb;
io_request->parent.remote_device_handle = smp_device_handle;
status = isci_smp_request_construct(io_request);
if (status != SCI_SUCCESS) {
isci_io_request_complete(controller->scif_controller_handle,
smp_device_handle, io_request, (SCI_IO_STATUS)status);
return;
}
sci_object_set_association(io_request->sci_object, io_request);
status = (SCI_STATUS) scif_controller_start_io(
controller->scif_controller_handle, smp_device_handle,
io_request->sci_object, SCI_CONTROLLER_INVALID_IO_TAG);
if (status != SCI_SUCCESS) {
isci_io_request_complete(controller->scif_controller_handle,
smp_device_handle, io_request, (SCI_IO_STATUS)status);
return;
}
if (ccb->ccb_h.timeout != CAM_TIME_INFINITY)
callout_reset(&io_request->parent.timer, ccb->ccb_h.timeout,
isci_io_request_timeout, request);
}
/*
* Callback routine from "bus_dmamap_load" or in simple case called directly.
*
* Takes a list of physical segments and builds the SGL for SCSI IO command
* and forwards the commard to the IOC after one last check that CAM has not
* aborted the transaction.
*/
static void
mpt_execute_req(void *arg, bus_dma_segment_t *dm_segs, int nseg, int error)
{
request_t *req;
union ccb *ccb;
mpt_softc_t *mpt;
MSG_SCSI_IO_REQUEST *mpt_req;
SGE_SIMPLE32 *se;
req = (request_t *)arg;
ccb = req->ccb;
mpt = ccb->ccb_h.ccb_mpt_ptr;
req = ccb->ccb_h.ccb_req_ptr;
mpt_req = req->req_vbuf;
if (error == 0 && nseg > MPT_SGL_MAX) {
error = EFBIG;
}
if (error != 0) {
if (error != EFBIG)
mpt_prt(mpt, "bus_dmamap_load returned %d", error);
if (ccb->ccb_h.status == CAM_REQ_INPROG) {
xpt_freeze_devq(ccb->ccb_h.path, 1);
ccb->ccb_h.status = CAM_DEV_QFRZN;
if (error == EFBIG)
ccb->ccb_h.status |= CAM_REQ_TOO_BIG;
else
ccb->ccb_h.status |= CAM_REQ_CMP_ERR;
}
ccb->ccb_h.status &= ~CAM_SIM_QUEUED;
xpt_done(ccb);
CAMLOCK_2_MPTLOCK(mpt);
mpt_free_request(mpt, req);
MPTLOCK_2_CAMLOCK(mpt);
return;
}
if (nseg > MPT_NSGL_FIRST(mpt)) {
int i, nleft = nseg;
u_int32_t flags;
bus_dmasync_op_t op;
SGE_CHAIN32 *ce;
mpt_req->DataLength = ccb->csio.dxfer_len;
flags = MPI_SGE_FLAGS_SIMPLE_ELEMENT;
if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_OUT)
flags |= MPI_SGE_FLAGS_HOST_TO_IOC;
se = (SGE_SIMPLE32 *) &mpt_req->SGL;
for (i = 0; i < MPT_NSGL_FIRST(mpt) - 1; i++, se++, dm_segs++) {
u_int32_t tf;
bzero(se, sizeof (*se));
se->Address = dm_segs->ds_addr;
MPI_pSGE_SET_LENGTH(se, dm_segs->ds_len);
tf = flags;
if (i == MPT_NSGL_FIRST(mpt) - 2) {
tf |= MPI_SGE_FLAGS_LAST_ELEMENT;
}
MPI_pSGE_SET_FLAGS(se, tf);
nleft -= 1;
}
/*
* Tell the IOC where to find the first chain element
*/
mpt_req->ChainOffset = ((char *)se - (char *)mpt_req) >> 2;
/*
* Until we're finished with all segments...
*/
while (nleft) {
int ntodo;
/*
* Construct the chain element that point to the
* next segment.
*/
ce = (SGE_CHAIN32 *) se++;
if (nleft > MPT_NSGL(mpt)) {
ntodo = MPT_NSGL(mpt) - 1;
ce->NextChainOffset = (MPT_RQSL(mpt) -
sizeof (SGE_SIMPLE32)) >> 2;
} else {
static void
ata_cam_begin_transaction(device_t dev, union ccb *ccb)
{
struct ata_channel *ch = device_get_softc(dev);
struct ata_request *request;
if (!(request = ata_alloc_request())) {
device_printf(dev, "FAILURE - out of memory in start\n");
ccb->ccb_h.status = CAM_REQ_INVALID;
xpt_done(ccb);
return;
}
bzero(request, sizeof(*request));
/* setup request */
request->dev = NULL;
request->parent = dev;
request->unit = ccb->ccb_h.target_id;
if (ccb->ccb_h.func_code == XPT_ATA_IO) {
request->data = ccb->ataio.data_ptr;
request->bytecount = ccb->ataio.dxfer_len;
request->u.ata.command = ccb->ataio.cmd.command;
request->u.ata.feature = ((uint16_t)ccb->ataio.cmd.features_exp << 8) |
(uint16_t)ccb->ataio.cmd.features;
request->u.ata.count = ((uint16_t)ccb->ataio.cmd.sector_count_exp << 8) |
(uint16_t)ccb->ataio.cmd.sector_count;
if (ccb->ataio.cmd.flags & CAM_ATAIO_48BIT) {
request->flags |= ATA_R_48BIT;
request->u.ata.lba =
((uint64_t)ccb->ataio.cmd.lba_high_exp << 40) |
((uint64_t)ccb->ataio.cmd.lba_mid_exp << 32) |
((uint64_t)ccb->ataio.cmd.lba_low_exp << 24);
} else {
request->u.ata.lba =
((uint64_t)(ccb->ataio.cmd.device & 0x0f) << 24);
}
request->u.ata.lba |= ((uint64_t)ccb->ataio.cmd.lba_high << 16) |
((uint64_t)ccb->ataio.cmd.lba_mid << 8) |
(uint64_t)ccb->ataio.cmd.lba_low;
if (ccb->ataio.cmd.flags & CAM_ATAIO_NEEDRESULT)
request->flags |= ATA_R_NEEDRESULT;
if ((ccb->ccb_h.flags & CAM_DIR_MASK) != CAM_DIR_NONE &&
ccb->ataio.cmd.flags & CAM_ATAIO_DMA)
request->flags |= ATA_R_DMA;
if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_IN)
request->flags |= ATA_R_READ;
if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_OUT)
request->flags |= ATA_R_WRITE;
if (ccb->ataio.cmd.command == ATA_READ_MUL ||
ccb->ataio.cmd.command == ATA_READ_MUL48 ||
ccb->ataio.cmd.command == ATA_WRITE_MUL ||
ccb->ataio.cmd.command == ATA_WRITE_MUL48) {
request->transfersize = min(request->bytecount,
ch->curr[ccb->ccb_h.target_id].bytecount);
} else
request->transfersize = min(request->bytecount, 512);
} else {
request->data = ccb->csio.data_ptr;
request->bytecount = ccb->csio.dxfer_len;
bcopy((ccb->ccb_h.flags & CAM_CDB_POINTER) ?
ccb->csio.cdb_io.cdb_ptr : ccb->csio.cdb_io.cdb_bytes,
request->u.atapi.ccb, ccb->csio.cdb_len);
request->flags |= ATA_R_ATAPI;
if (ch->curr[ccb->ccb_h.target_id].atapi == 16)
request->flags |= ATA_R_ATAPI16;
if ((ccb->ccb_h.flags & CAM_DIR_MASK) != CAM_DIR_NONE &&
ch->curr[ccb->ccb_h.target_id].mode >= ATA_DMA)
request->flags |= ATA_R_DMA;
if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_IN)
request->flags |= ATA_R_READ;
if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_OUT)
request->flags |= ATA_R_WRITE;
request->transfersize = min(request->bytecount,
ch->curr[ccb->ccb_h.target_id].bytecount);
}
request->retries = 0;
request->timeout = (ccb->ccb_h.timeout + 999) / 1000;
callout_init_mtx(&request->callout, &ch->state_mtx, CALLOUT_RETURNUNLOCKED);
request->ccb = ccb;
request->flags |= ATA_R_DATA_IN_CCB;
ch->running = request;
ch->state = ATA_ACTIVE;
if (ch->hw.begin_transaction(request) == ATA_OP_FINISHED) {
ch->running = NULL;
ch->state = ATA_IDLE;
ata_cam_end_transaction(dev, request);
return;
}
}
static void
ataaction(struct cam_sim *sim, union ccb *ccb)
{
device_t dev, parent;
struct ata_channel *ch;
CAM_DEBUG(ccb->ccb_h.path, CAM_DEBUG_TRACE, ("ataaction func_code=%x\n",
ccb->ccb_h.func_code));
ch = (struct ata_channel *)cam_sim_softc(sim);
dev = ch->dev;
switch (ccb->ccb_h.func_code) {
/* Common cases first */
case XPT_ATA_IO: /* Execute the requested I/O operation */
case XPT_SCSI_IO:
if (ata_check_ids(dev, ccb))
return;
if ((ch->devices & ((ATA_ATA_MASTER | ATA_ATAPI_MASTER)
<< ccb->ccb_h.target_id)) == 0) {
ccb->ccb_h.status = CAM_SEL_TIMEOUT;
break;
}
if (ch->running)
device_printf(dev, "already running!\n");
if (ccb->ccb_h.func_code == XPT_ATA_IO &&
(ccb->ataio.cmd.flags & CAM_ATAIO_CONTROL) &&
(ccb->ataio.cmd.control & ATA_A_RESET)) {
struct ata_res *res = &ccb->ataio.res;
bzero(res, sizeof(*res));
if (ch->devices & (ATA_ATA_MASTER << ccb->ccb_h.target_id)) {
res->lba_high = 0;
res->lba_mid = 0;
} else {
res->lba_high = 0xeb;
res->lba_mid = 0x14;
}
ccb->ccb_h.status = CAM_REQ_CMP;
break;
}
ata_cam_begin_transaction(dev, ccb);
return;
case XPT_EN_LUN: /* Enable LUN as a target */
case XPT_TARGET_IO: /* Execute target I/O request */
case XPT_ACCEPT_TARGET_IO: /* Accept Host Target Mode CDB */
case XPT_CONT_TARGET_IO: /* Continue Host Target I/O Connection*/
case XPT_ABORT: /* Abort the specified CCB */
/* XXX Implement */
ccb->ccb_h.status = CAM_REQ_INVALID;
break;
case XPT_SET_TRAN_SETTINGS:
{
struct ccb_trans_settings *cts = &ccb->cts;
struct ata_cam_device *d;
if (ata_check_ids(dev, ccb))
return;
if (cts->type == CTS_TYPE_CURRENT_SETTINGS)
d = &ch->curr[ccb->ccb_h.target_id];
else
d = &ch->user[ccb->ccb_h.target_id];
if (ch->flags & ATA_SATA) {
if (cts->xport_specific.sata.valid & CTS_SATA_VALID_REVISION)
d->revision = cts->xport_specific.sata.revision;
if (cts->xport_specific.sata.valid & CTS_SATA_VALID_MODE) {
if (cts->type == CTS_TYPE_CURRENT_SETTINGS) {
d->mode = ATA_SETMODE(ch->dev,
ccb->ccb_h.target_id,
cts->xport_specific.sata.mode);
} else
d->mode = cts->xport_specific.sata.mode;
}
if (cts->xport_specific.sata.valid & CTS_SATA_VALID_BYTECOUNT)
d->bytecount = min(8192, cts->xport_specific.sata.bytecount);
if (cts->xport_specific.sata.valid & CTS_SATA_VALID_ATAPI)
d->atapi = cts->xport_specific.sata.atapi;
if (cts->xport_specific.sata.valid & CTS_SATA_VALID_CAPS)
d->caps = cts->xport_specific.sata.caps;
} else {
if (cts->xport_specific.ata.valid & CTS_ATA_VALID_MODE) {
if (cts->type == CTS_TYPE_CURRENT_SETTINGS) {
d->mode = ATA_SETMODE(ch->dev,
ccb->ccb_h.target_id,
cts->xport_specific.ata.mode);
} else
d->mode = cts->xport_specific.ata.mode;
}
if (cts->xport_specific.ata.valid & CTS_ATA_VALID_BYTECOUNT)
d->bytecount = cts->xport_specific.ata.bytecount;
if (cts->xport_specific.ata.valid & CTS_ATA_VALID_ATAPI)
d->atapi = cts->xport_specific.ata.atapi;
if (cts->xport_specific.ata.valid & CTS_ATA_VALID_CAPS)
d->caps = cts->xport_specific.ata.caps;
}
ccb->ccb_h.status = CAM_REQ_CMP;
break;
}
case XPT_GET_TRAN_SETTINGS:
{
struct ccb_trans_settings *cts = &ccb->cts;
struct ata_cam_device *d;
if (ata_check_ids(dev, ccb))
return;
if (cts->type == CTS_TYPE_CURRENT_SETTINGS)
d = &ch->curr[ccb->ccb_h.target_id];
else
d = &ch->user[ccb->ccb_h.target_id];
cts->protocol = PROTO_UNSPECIFIED;
cts->protocol_version = PROTO_VERSION_UNSPECIFIED;
if (ch->flags & ATA_SATA) {
cts->transport = XPORT_SATA;
cts->transport_version = XPORT_VERSION_UNSPECIFIED;
cts->xport_specific.sata.valid = 0;
cts->xport_specific.sata.mode = d->mode;
cts->xport_specific.sata.valid |= CTS_SATA_VALID_MODE;
cts->xport_specific.sata.bytecount = d->bytecount;
cts->xport_specific.sata.valid |= CTS_SATA_VALID_BYTECOUNT;
if (cts->type == CTS_TYPE_CURRENT_SETTINGS) {
cts->xport_specific.sata.revision =
ATA_GETREV(dev, ccb->ccb_h.target_id);
if (cts->xport_specific.sata.revision != 0xff) {
cts->xport_specific.sata.valid |=
CTS_SATA_VALID_REVISION;
}
cts->xport_specific.sata.caps =
d->caps & CTS_SATA_CAPS_D;
if (ch->pm_level) {
cts->xport_specific.sata.caps |=
CTS_SATA_CAPS_H_PMREQ;
}
cts->xport_specific.sata.caps &=
ch->user[ccb->ccb_h.target_id].caps;
} else {
cts->xport_specific.sata.revision = d->revision;
cts->xport_specific.sata.valid |= CTS_SATA_VALID_REVISION;
cts->xport_specific.sata.caps = d->caps;
}
cts->xport_specific.sata.valid |= CTS_SATA_VALID_CAPS;
cts->xport_specific.sata.atapi = d->atapi;
cts->xport_specific.sata.valid |= CTS_SATA_VALID_ATAPI;
} else {
cts->transport = XPORT_ATA;
cts->transport_version = XPORT_VERSION_UNSPECIFIED;
cts->xport_specific.ata.valid = 0;
cts->xport_specific.ata.mode = d->mode;
cts->xport_specific.ata.valid |= CTS_ATA_VALID_MODE;
cts->xport_specific.ata.bytecount = d->bytecount;
cts->xport_specific.ata.valid |= CTS_ATA_VALID_BYTECOUNT;
if (cts->type == CTS_TYPE_CURRENT_SETTINGS) {
cts->xport_specific.ata.caps =
d->caps & CTS_ATA_CAPS_D;
if (!(ch->flags & ATA_NO_48BIT_DMA))
cts->xport_specific.ata.caps |=
CTS_ATA_CAPS_H_DMA48;
cts->xport_specific.ata.caps &=
ch->user[ccb->ccb_h.target_id].caps;
} else
cts->xport_specific.ata.caps = d->caps;
cts->xport_specific.ata.valid |= CTS_ATA_VALID_CAPS;
cts->xport_specific.ata.atapi = d->atapi;
cts->xport_specific.ata.valid |= CTS_ATA_VALID_ATAPI;
}
ccb->ccb_h.status = CAM_REQ_CMP;
break;
}
case XPT_RESET_BUS: /* Reset the specified SCSI bus */
case XPT_RESET_DEV: /* Bus Device Reset the specified SCSI device */
ata_reinit(dev);
ccb->ccb_h.status = CAM_REQ_CMP;
break;
case XPT_TERM_IO: /* Terminate the I/O process */
/* XXX Implement */
ccb->ccb_h.status = CAM_REQ_INVALID;
break;
case XPT_PATH_INQ: /* Path routing inquiry */
{
struct ccb_pathinq *cpi = &ccb->cpi;
parent = device_get_parent(dev);
cpi->version_num = 1; /* XXX??? */
cpi->hba_inquiry = PI_SDTR_ABLE;
cpi->target_sprt = 0;
cpi->hba_misc = PIM_SEQSCAN | PIM_UNMAPPED;
cpi->hba_eng_cnt = 0;
if (ch->flags & ATA_NO_SLAVE)
cpi->max_target = 0;
else
cpi->max_target = 1;
cpi->max_lun = 0;
cpi->initiator_id = 0;
cpi->bus_id = cam_sim_bus(sim);
if (ch->flags & ATA_SATA)
cpi->base_transfer_speed = 150000;
else
cpi->base_transfer_speed = 3300;
strncpy(cpi->sim_vid, "FreeBSD", SIM_IDLEN);
strncpy(cpi->hba_vid, "ATA", HBA_IDLEN);
strncpy(cpi->dev_name, cam_sim_name(sim), DEV_IDLEN);
cpi->unit_number = cam_sim_unit(sim);
if (ch->flags & ATA_SATA)
cpi->transport = XPORT_SATA;
else
cpi->transport = XPORT_ATA;
cpi->transport_version = XPORT_VERSION_UNSPECIFIED;
cpi->protocol = PROTO_ATA;
cpi->protocol_version = PROTO_VERSION_UNSPECIFIED;
cpi->maxio = ch->dma.max_iosize ? ch->dma.max_iosize : DFLTPHYS;
if (device_get_devclass(device_get_parent(parent)) ==
devclass_find("pci")) {
cpi->hba_vendor = pci_get_vendor(parent);
cpi->hba_device = pci_get_device(parent);
cpi->hba_subvendor = pci_get_subvendor(parent);
cpi->hba_subdevice = pci_get_subdevice(parent);
}
cpi->ccb_h.status = CAM_REQ_CMP;
break;
}
default:
ccb->ccb_h.status = CAM_REQ_INVALID;
break;
}
xpt_done(ccb);
}
/*
* Function name: tw_osli_execute_scsi
* Description: Build a fw cmd, based on a CAM style ccb, and
* send it down.
*
* Input: req -- ptr to OSL internal request context
* ccb -- ptr to CAM style ccb
* Output: None
* Return value: 0 -- success
* non-zero-- failure
*/
TW_INT32
tw_osli_execute_scsi(struct tw_osli_req_context *req, union ccb *ccb)
{
struct twa_softc *sc = req->ctlr;
struct tw_cl_req_packet *req_pkt;
struct tw_cl_scsi_req_packet *scsi_req;
struct ccb_hdr *ccb_h = &(ccb->ccb_h);
struct ccb_scsiio *csio = &(ccb->csio);
TW_INT32 error;
tw_osli_dbg_dprintf(10, sc, "SCSI I/O request 0x%x",
csio->cdb_io.cdb_bytes[0]);
if (ccb_h->target_id >= TW_CL_MAX_NUM_UNITS) {
tw_osli_dbg_dprintf(3, sc, "Invalid target. PTL = %x %x %x",
ccb_h->path_id, ccb_h->target_id, ccb_h->target_lun);
ccb_h->status |= CAM_TID_INVALID;
xpt_done(ccb);
return(1);
}
if (ccb_h->target_lun >= TW_CL_MAX_NUM_LUNS) {
tw_osli_dbg_dprintf(3, sc, "Invalid lun. PTL = %x %x %x",
ccb_h->path_id, ccb_h->target_id, ccb_h->target_lun);
ccb_h->status |= CAM_LUN_INVALID;
xpt_done(ccb);
return(1);
}
if(ccb_h->flags & CAM_CDB_PHYS) {
tw_osli_printf(sc, "",
TW_CL_SEVERITY_ERROR_STRING,
TW_CL_MESSAGE_SOURCE_FREEBSD_DRIVER,
0x2105,
"Physical CDB address!");
ccb_h->status = CAM_REQ_INVALID;
xpt_done(ccb);
return(1);
}
/*
* We are going to work on this request. Mark it as enqueued (though
* we don't actually queue it...)
*/
ccb_h->status |= CAM_SIM_QUEUED;
if((ccb_h->flags & CAM_DIR_MASK) != CAM_DIR_NONE) {
if(ccb_h->flags & CAM_DIR_IN)
req->flags |= TW_OSLI_REQ_FLAGS_DATA_IN;
else
req->flags |= TW_OSLI_REQ_FLAGS_DATA_OUT;
}
/* Build the CL understood request packet for SCSI cmds. */
req_pkt = &req->req_pkt;
req_pkt->status = 0;
req_pkt->tw_osl_callback = tw_osl_complete_io;
scsi_req = &(req_pkt->gen_req_pkt.scsi_req);
scsi_req->unit = ccb_h->target_id;
scsi_req->lun = ccb_h->target_lun;
scsi_req->sense_len = 0;
scsi_req->sense_data = (TW_UINT8 *)(&csio->sense_data);
scsi_req->scsi_status = 0;
if(ccb_h->flags & CAM_CDB_POINTER)
scsi_req->cdb = csio->cdb_io.cdb_ptr;
else
scsi_req->cdb = csio->cdb_io.cdb_bytes;
scsi_req->cdb_len = csio->cdb_len;
if (!(ccb_h->flags & CAM_DATA_PHYS)) {
/* Virtual data addresses. Need to convert them... */
tw_osli_dbg_dprintf(3, sc,
"XPT_SCSI_IO: Single virtual address!");
if (!(ccb_h->flags & CAM_SCATTER_VALID)) {
if (csio->dxfer_len > TW_CL_MAX_IO_SIZE) {
tw_osli_printf(sc, "size = %d",
TW_CL_SEVERITY_ERROR_STRING,
TW_CL_MESSAGE_SOURCE_FREEBSD_DRIVER,
0x2106,
"I/O size too big",
csio->dxfer_len);
ccb_h->status = CAM_REQ_TOO_BIG;
ccb_h->status &= ~CAM_SIM_QUEUED;
xpt_done(ccb);
return(1);
}
if ((req->length = csio->dxfer_len)) {
req->data = csio->data_ptr;
scsi_req->sgl_entries = 1;
}
} else {
tw_osli_printf(sc, "",
TW_CL_SEVERITY_ERROR_STRING,
TW_CL_MESSAGE_SOURCE_FREEBSD_DRIVER,
0x2107,
"XPT_SCSI_IO: Got SGList");
ccb_h->status = CAM_REQ_INVALID;
ccb_h->status &= ~CAM_SIM_QUEUED;
xpt_done(ccb);
return(1);
}
} else {
/* Data addresses are physical. */
tw_osli_printf(sc, "",
TW_CL_SEVERITY_ERROR_STRING,
TW_CL_MESSAGE_SOURCE_FREEBSD_DRIVER,
0x2108,
"XPT_SCSI_IO: Physical data addresses");
ccb_h->status = CAM_REQ_INVALID;
ccb_h->status &= ~CAM_SIM_QUEUED;
xpt_done(ccb);
return(1);
}
req->deadline = tw_osl_get_local_time() + (ccb_h->timeout / 1000);
/*
* twa_map_load_data_callback will fill in the SGL,
* and submit the I/O.
*/
error = tw_osli_map_request(req);
if ((error) && (req->flags & TW_OSLI_REQ_FLAGS_FAILED)) {
req->deadline = 0;
ccb_h->status = CAM_REQ_CMP_ERR;
ccb_h->status &= ~CAM_SIM_QUEUED;
xpt_done(ccb);
}
return(error);
}
static void hpt_scsi_io(PVBUS_EXT vbus_ext, union ccb *ccb)
{
PVBUS vbus = (PVBUS)vbus_ext->vbus;
PVDEV vd;
PCOMMAND pCmd;
POS_CMDEXT ext;
HPT_U8 *cdb;
if (ccb->ccb_h.flags & CAM_CDB_POINTER)
cdb = ccb->csio.cdb_io.cdb_ptr;
else
cdb = ccb->csio.cdb_io.cdb_bytes;
KdPrint(("hpt_scsi_io: ccb %x id %d lun %d cdb %x-%x-%x",
ccb,
ccb->ccb_h.target_id, ccb->ccb_h.target_lun,
*(HPT_U32 *)&cdb[0], *(HPT_U32 *)&cdb[4], *(HPT_U32 *)&cdb[8]
));
/* ccb->ccb_h.path_id is not our bus id - don't check it */
if (ccb->ccb_h.target_lun != 0 ||
ccb->ccb_h.target_id >= osm_max_targets ||
(ccb->ccb_h.flags & CAM_CDB_PHYS))
{
ccb->ccb_h.status = CAM_TID_INVALID;
xpt_done(ccb);
return;
}
vd = ldm_find_target(vbus, ccb->ccb_h.target_id);
if (!vd) {
ccb->ccb_h.status = CAM_TID_INVALID;
xpt_done(ccb);
return;
}
switch (cdb[0]) {
case TEST_UNIT_READY:
case START_STOP_UNIT:
case SYNCHRONIZE_CACHE:
ccb->ccb_h.status = CAM_REQ_CMP;
break;
case INQUIRY:
{
PINQUIRYDATA inquiryData;
memset(ccb->csio.data_ptr, 0, ccb->csio.dxfer_len);
inquiryData = (PINQUIRYDATA)ccb->csio.data_ptr;
inquiryData->AdditionalLength = 31;
inquiryData->CommandQueue = 1;
memcpy(&inquiryData->VendorId, "HPT ", 8);
memcpy(&inquiryData->ProductId, "DISK 0_0 ", 16);
if (vd->target_id / 10) {
inquiryData->ProductId[7] = (vd->target_id % 100) / 10 + '0';
inquiryData->ProductId[8] = (vd->target_id % 100) % 10 + '0';
}
else
inquiryData->ProductId[7] = (vd->target_id % 100) % 10 + '0';
memcpy(&inquiryData->ProductRevisionLevel, "4.00", 4);
ccb->ccb_h.status = CAM_REQ_CMP;
}
break;
case READ_CAPACITY:
{
HPT_U8 *rbuf = ccb->csio.data_ptr;
HPT_U32 cap;
if (vd->capacity>0xfffffffful)
cap = 0xfffffffful;
else
cap = vd->capacity - 1;
rbuf[0] = (HPT_U8)(cap>>24);
rbuf[1] = (HPT_U8)(cap>>16);
rbuf[2] = (HPT_U8)(cap>>8);
rbuf[3] = (HPT_U8)cap;
rbuf[4] = 0;
rbuf[5] = 0;
rbuf[6] = 2;
rbuf[7] = 0;
ccb->ccb_h.status = CAM_REQ_CMP;
break;
}
case SERVICE_ACTION_IN:
{
HPT_U8 *rbuf = ccb->csio.data_ptr;
HPT_U64 cap = vd->capacity - 1;
rbuf[0] = (HPT_U8)(cap>>56);
rbuf[1] = (HPT_U8)(cap>>48);
rbuf[2] = (HPT_U8)(cap>>40);
rbuf[3] = (HPT_U8)(cap>>32);
rbuf[4] = (HPT_U8)(cap>>24);
rbuf[5] = (HPT_U8)(cap>>16);
rbuf[6] = (HPT_U8)(cap>>8);
rbuf[7] = (HPT_U8)cap;
rbuf[8] = 0;
rbuf[9] = 0;
rbuf[10] = 2;
rbuf[11] = 0;
ccb->ccb_h.status = CAM_REQ_CMP;
break;
}
case READ_6:
case READ_10:
case READ_16:
case WRITE_6:
case WRITE_10:
case WRITE_16:
case 0x13:
case 0x2f:
case 0x8f: /* VERIFY_16 */
{
pCmd = ldm_alloc_cmds(vbus, vd->cmds_per_request);
if(!pCmd){
KdPrint(("Failed to allocate command!"));
ccb->ccb_h.status = CAM_BUSY;
break;
}
switch (cdb[0]) {
case READ_6:
case WRITE_6:
case 0x13:
pCmd->uCmd.Ide.Lba = ((HPT_U32)cdb[1] << 16) | ((HPT_U32)cdb[2] << 8) | (HPT_U32)cdb[3];
pCmd->uCmd.Ide.nSectors = (HPT_U16) cdb[4];
break;
case READ_16:
case WRITE_16:
case 0x8f: /* VERIFY_16 */
{
HPT_U64 block =
((HPT_U64)cdb[2]<<56) |
((HPT_U64)cdb[3]<<48) |
((HPT_U64)cdb[4]<<40) |
((HPT_U64)cdb[5]<<32) |
((HPT_U64)cdb[6]<<24) |
((HPT_U64)cdb[7]<<16) |
((HPT_U64)cdb[8]<<8) |
((HPT_U64)cdb[9]);
pCmd->uCmd.Ide.Lba = block;
pCmd->uCmd.Ide.nSectors = (HPT_U16)cdb[13] | ((HPT_U16)cdb[12]<<8);
break;
}
default:
pCmd->uCmd.Ide.Lba = (HPT_U32)cdb[5] | ((HPT_U32)cdb[4] << 8) | ((HPT_U32)cdb[3] << 16) | ((HPT_U32)cdb[2] << 24);
pCmd->uCmd.Ide.nSectors = (HPT_U16) cdb[8] | ((HPT_U16)cdb[7]<<8);
break;
}
switch (cdb[0]) {
case READ_6:
case READ_10:
case READ_16:
pCmd->flags.data_in = 1;
break;
case WRITE_6:
case WRITE_10:
case WRITE_16:
pCmd->flags.data_out = 1;
break;
}
pCmd->priv = ext = cmdext_get(vbus_ext);
HPT_ASSERT(ext);
ext->ccb = ccb;
pCmd->target = vd;
pCmd->done = os_cmddone;
pCmd->buildsgl = os_buildsgl;
pCmd->psg = ext->psg;
if (ccb->ccb_h.flags & CAM_SCATTER_VALID) {
int idx;
bus_dma_segment_t *sgList = (bus_dma_segment_t *)ccb->csio.data_ptr;
if (ccb->ccb_h.flags & CAM_SG_LIST_PHYS)
pCmd->flags.physical_sg = 1;
for (idx = 0; idx < ccb->csio.sglist_cnt; idx++) {
pCmd->psg[idx].addr.bus = sgList[idx].ds_addr;
pCmd->psg[idx].size = sgList[idx].ds_len;
pCmd->psg[idx].eot = (idx==ccb->csio.sglist_cnt-1)? 1 : 0;
}
callout_reset(&ccb->ccb_h.timeout_ch, HPT_OSM_TIMEOUT, hpt_timeout, pCmd);
ldm_queue_cmd(pCmd);
}
else {
int error;
pCmd->flags.physical_sg = 1;
error = bus_dmamap_load(vbus_ext->io_dmat,
ext->dma_map,
ccb->csio.data_ptr, ccb->csio.dxfer_len,
hpt_io_dmamap_callback, pCmd,
BUS_DMA_WAITOK
);
KdPrint(("bus_dmamap_load return %d", error));
if (error && error!=EINPROGRESS) {
os_printk("bus_dmamap_load error %d", error);
cmdext_put(ext);
ldm_free_cmds(pCmd);
ccb->ccb_h.status = CAM_REQ_CMP_ERR;
xpt_done(ccb);
}
}
return;
}
default:
ccb->ccb_h.status = CAM_REQ_INVALID;
break;
}
xpt_done(ccb);
return;
}
/*
* Function name: twa_action
* Description: Driver entry point for CAM's use.
*
* Input: sim -- sim corresponding to the ctlr
* ccb -- ptr to CAM request
* Output: None
* Return value: None
*/
TW_VOID
twa_action(struct cam_sim *sim, union ccb *ccb)
{
struct twa_softc *sc = (struct twa_softc *)cam_sim_softc(sim);
struct ccb_hdr *ccb_h = &(ccb->ccb_h);
switch (ccb_h->func_code) {
case XPT_SCSI_IO: /* SCSI I/O */
{
struct tw_osli_req_context *req;
req = tw_osli_get_request(sc);
if (req == NULL) {
tw_osli_dbg_dprintf(2, sc, "Cannot get request pkt.");
/*
* Freeze the simq to maintain ccb ordering. The next
* ccb that gets completed will unfreeze the simq.
*/
ccb_h->status &= ~CAM_SIM_QUEUED;
ccb_h->status |= CAM_REQUEUE_REQ;
xpt_done(ccb);
break;
}
if ((tw_cl_is_reset_needed(&(req->ctlr->ctlr_handle)))) {
ccb_h->status &= ~CAM_SIM_QUEUED;
ccb_h->status |= CAM_REQUEUE_REQ;
xpt_done(ccb);
tw_osli_req_q_insert_tail(req, TW_OSLI_FREE_Q);
break;
}
req->req_handle.osl_req_ctxt = req;
req->req_handle.is_io = TW_CL_TRUE;
req->orig_req = ccb;
if (tw_osli_execute_scsi(req, ccb))
tw_osli_req_q_insert_tail(req, TW_OSLI_FREE_Q);
break;
}
case XPT_ABORT:
tw_osli_dbg_dprintf(2, sc, "Abort request.");
ccb_h->status = CAM_UA_ABORT;
xpt_done(ccb);
break;
case XPT_RESET_BUS:
tw_cl_create_event(&(sc->ctlr_handle), TW_CL_FALSE,
TW_CL_MESSAGE_SOURCE_FREEBSD_DRIVER,
0x2108, 0x3, TW_CL_SEVERITY_INFO_STRING,
"Received Reset Bus request from CAM",
" ");
tw_cl_set_reset_needed(&(sc->ctlr_handle));
ccb_h->status = CAM_REQ_CMP;
xpt_done(ccb);
break;
case XPT_SET_TRAN_SETTINGS:
tw_osli_dbg_dprintf(3, sc, "XPT_SET_TRAN_SETTINGS");
/*
* This command is not supported, since it's very specific
* to SCSI, and we are doing ATA.
*/
ccb_h->status = CAM_FUNC_NOTAVAIL;
xpt_done(ccb);
break;
case XPT_GET_TRAN_SETTINGS:
{
struct ccb_trans_settings *cts = &ccb->cts;
struct ccb_trans_settings_scsi *scsi =
&cts->proto_specific.scsi;
struct ccb_trans_settings_spi *spi =
&cts->xport_specific.spi;
cts->protocol = PROTO_SCSI;
cts->protocol_version = SCSI_REV_2;
cts->transport = XPORT_SPI;
cts->transport_version = 2;
spi->valid = CTS_SPI_VALID_DISC;
spi->flags = CTS_SPI_FLAGS_DISC_ENB;
scsi->valid = CTS_SCSI_VALID_TQ;
scsi->flags = CTS_SCSI_FLAGS_TAG_ENB;
tw_osli_dbg_dprintf(3, sc, "XPT_GET_TRAN_SETTINGS");
ccb_h->status = CAM_REQ_CMP;
xpt_done(ccb);
break;
}
case XPT_CALC_GEOMETRY:
tw_osli_dbg_dprintf(3, sc, "XPT_CALC_GEOMETRY");
cam_calc_geometry(&ccb->ccg, 1/* extended */);
xpt_done(ccb);
break;
case XPT_PATH_INQ: /* Path inquiry -- get twa properties */
{
struct ccb_pathinq *path_inq = &ccb->cpi;
tw_osli_dbg_dprintf(3, sc, "XPT_PATH_INQ request");
path_inq->version_num = 1;
path_inq->hba_inquiry = 0;
path_inq->target_sprt = 0;
path_inq->hba_misc = 0;
path_inq->hba_eng_cnt = 0;
path_inq->max_target = TW_CL_MAX_NUM_UNITS;
path_inq->max_lun = TW_CL_MAX_NUM_LUNS - 1;
path_inq->unit_number = cam_sim_unit(sim);
path_inq->bus_id = cam_sim_bus(sim);
path_inq->initiator_id = TW_CL_MAX_NUM_UNITS;
path_inq->base_transfer_speed = 100000;
strncpy(path_inq->sim_vid, "FreeBSD", SIM_IDLEN);
strncpy(path_inq->hba_vid, "3ware", HBA_IDLEN);
strncpy(path_inq->dev_name, cam_sim_name(sim), DEV_IDLEN);
path_inq->transport = XPORT_SPI;
path_inq->transport_version = 2;
path_inq->protocol = PROTO_SCSI;
path_inq->protocol_version = SCSI_REV_2;
#if 0 /* XXX swildner */
path_inq->maxio = TW_CL_MAX_IO_SIZE;
#endif
ccb_h->status = CAM_REQ_CMP;
xpt_done(ccb);
break;
}
default:
tw_osli_dbg_dprintf(3, sc, "func_code = %x", ccb_h->func_code);
ccb_h->status = CAM_REQ_INVALID;
xpt_done(ccb);
break;
}
}
static void
nvme_sim_action(struct cam_sim *sim, union ccb *ccb)
{
struct nvme_controller *ctrlr;
struct nvme_namespace *ns;
CAM_DEBUG(ccb->ccb_h.path, CAM_DEBUG_TRACE,
("nvme_sim_action: func= %#x\n",
ccb->ccb_h.func_code));
/*
* XXX when we support multiple namespaces in the base driver we'll need
* to revisit how all this gets stored and saved in the periph driver's
* reserved areas. Right now we store all three in the softc of the sim.
*/
ns = sim2ns(sim);
ctrlr = sim2ctrlr(sim);
mtx_assert(&ctrlr->lock, MA_OWNED);
switch (ccb->ccb_h.func_code) {
case XPT_CALC_GEOMETRY: /* Calculate Geometry Totally nuts ? XXX */
/*
* Only meaningful for old-school SCSI disks since only the SCSI
* da driver generates them. Reject all these that slip through.
*/
/*FALLTHROUGH*/
case XPT_ABORT: /* Abort the specified CCB */
case XPT_EN_LUN: /* Enable LUN as a target */
case XPT_TARGET_IO: /* Execute target I/O request */
case XPT_ACCEPT_TARGET_IO: /* Accept Host Target Mode CDB */
case XPT_CONT_TARGET_IO: /* Continue Host Target I/O Connection*/
/*
* Only target mode generates these, and only for SCSI. They are
* all invalid/unsupported for NVMe.
*/
ccb->ccb_h.status = CAM_REQ_INVALID;
break;
case XPT_SET_TRAN_SETTINGS:
/*
* NVMe doesn't really have different transfer settings, but
* other parts of CAM think failure here is a big deal.
*/
ccb->ccb_h.status = CAM_REQ_CMP;
break;
case XPT_PATH_INQ: /* Path routing inquiry */
{
struct ccb_pathinq *cpi = &ccb->cpi;
/*
* NVMe may have multiple LUNs on the same path. Current generation
* of NVMe devives support only a single name space. Multiple name
* space drives are coming, but it's unclear how we should report
* them up the stack.
*/
cpi->version_num = 1;
cpi->hba_inquiry = 0;
cpi->target_sprt = 0;
cpi->hba_misc = PIM_UNMAPPED /* | PIM_NOSCAN */;
cpi->hba_eng_cnt = 0;
cpi->max_target = 0;
cpi->max_lun = ctrlr->cdata.nn;
cpi->maxio = nvme_ns_get_max_io_xfer_size(ns);
cpi->initiator_id = 0;
cpi->bus_id = cam_sim_bus(sim);
cpi->base_transfer_speed = 4000000; /* 4 GB/s 4 lanes pcie 3 */
strncpy(cpi->sim_vid, "FreeBSD", SIM_IDLEN);
strncpy(cpi->hba_vid, "NVMe", HBA_IDLEN);
strncpy(cpi->dev_name, cam_sim_name(sim), DEV_IDLEN);
cpi->unit_number = cam_sim_unit(sim);
cpi->transport = XPORT_NVME; /* XXX XPORT_PCIE ? */
cpi->transport_version = 1; /* XXX Get PCIe spec ? */
cpi->protocol = PROTO_NVME;
cpi->protocol_version = NVME_REV_1; /* Groks all 1.x NVMe cards */
cpi->xport_specific.nvme.nsid = ns->id;
cpi->ccb_h.status = CAM_REQ_CMP;
break;
}
case XPT_GET_TRAN_SETTINGS: /* Get transport settings */
{
struct ccb_trans_settings *cts;
struct ccb_trans_settings_nvme *nvmep;
struct ccb_trans_settings_nvme *nvmex;
cts = &ccb->cts;
nvmex = &cts->xport_specific.nvme;
nvmep = &cts->proto_specific.nvme;
nvmex->valid = CTS_NVME_VALID_SPEC;
nvmex->spec_major = 1; /* XXX read from card */
nvmex->spec_minor = 2;
nvmex->spec_tiny = 0;
nvmep->valid = CTS_NVME_VALID_SPEC;
nvmep->spec_major = 1; /* XXX read from card */
nvmep->spec_minor = 2;
nvmep->spec_tiny = 0;
cts->transport = XPORT_NVME;
cts->protocol = PROTO_NVME;
cts->ccb_h.status = CAM_REQ_CMP;
break;
}
case XPT_TERM_IO: /* Terminate the I/O process */
/*
* every driver handles this, but nothing generates it. Assume
* it's OK to just say 'that worked'.
*/
/*FALLTHROUGH*/
case XPT_RESET_DEV: /* Bus Device Reset the specified device */
case XPT_RESET_BUS: /* Reset the specified bus */
/*
* NVMe doesn't really support physically resetting the bus. It's part
* of the bus scanning dance, so return sucess to tell the process to
* proceed.
*/
ccb->ccb_h.status = CAM_REQ_CMP;
break;
case XPT_NVME_IO: /* Execute the requested I/O operation */
nvme_sim_nvmeio(sim, ccb);
return; /* no done */
default:
ccb->ccb_h.status = CAM_REQ_INVALID;
break;
}
xpt_done(ccb);
}
static void
wds_scsi_io(struct cam_sim * sim, struct ccb_scsiio * csio)
{
int unit = cam_sim_unit(sim);
struct wds *wp;
struct ccb_hdr *ccb_h;
struct wds_req *r;
int base;
u_int8_t c;
int error;
int n;
wp = (struct wds *)cam_sim_softc(sim);
ccb_h = &csio->ccb_h;
DBG(DBX "wds%d: cmd TARG=%d LUN=%d\n", unit, ccb_h->target_id,
ccb_h->target_lun);
if (ccb_h->target_id > 7 || ccb_h->target_id == WDS_HBA_ID) {
ccb_h->status = CAM_TID_INVALID;
xpt_done((union ccb *) csio);
return;
}
if (ccb_h->target_lun > 7) {
ccb_h->status = CAM_LUN_INVALID;
xpt_done((union ccb *) csio);
return;
}
if (csio->dxfer_len > BUFSIZ) {
ccb_h->status = CAM_REQ_TOO_BIG;
xpt_done((union ccb *) csio);
return;
}
if (ccb_h->flags & (CAM_CDB_PHYS | CAM_SCATTER_VALID | CAM_DATA_PHYS)) {
/* don't support these */
ccb_h->status = CAM_REQ_INVALID;
xpt_done((union ccb *) csio);
return;
}
base = wp->addr;
/*
* this check is mostly for debugging purposes,
* "can't happen" normally.
*/
if(wp->want_wdsr) {
DBG(DBX "wds%d: someone already waits for buffer\n", unit);
smallog('b');
n = xpt_freeze_simq(sim, /* count */ 1);
smallog('0'+n);
ccb_h->status = CAM_REQUEUE_REQ;
xpt_done((union ccb *) csio);
return;
}
r = wdsr_alloc(wp);
if (r == NULL) {
device_printf(wp->dev, "no request slot available!\n");
wp->want_wdsr = 1;
n = xpt_freeze_simq(sim, /* count */ 1);
smallog2('f', '0'+n);
ccb_h->status = CAM_REQUEUE_REQ;
xpt_done((union ccb *) csio);
return;
}
ccb_h->ccb_wdsr = (void *) r;
r->ccb = (union ccb *) csio;
switch (error = frag_alloc(wp, csio->dxfer_len, &r->buf, &r->mask)) {
case CAM_REQ_CMP:
break;
case CAM_REQUEUE_REQ:
DBG(DBX "wds%d: no data buffer available\n", unit);
wp->want_wdsr = 1;
n = xpt_freeze_simq(sim, /* count */ 1);
smallog2('f', '0'+n);
wdsr_ccb_done(wp, r, r->ccb, CAM_REQUEUE_REQ);
return;
default:
DBG(DBX "wds%d: request is too big\n", unit);
wdsr_ccb_done(wp, r, r->ccb, error);
break;
}
ccb_h->status |= CAM_SIM_QUEUED;
r->flags &= ~WR_DONE;
scsi_ulto3b(WDSTOPHYS(wp, &r->cmd), wp->dx->ombs[r->ombn].addr);
bzero(&r->cmd, sizeof r->cmd);
r->cmd.cmd = WDSX_SCSICMD;
r->cmd.targ = (ccb_h->target_id << 5) | ccb_h->target_lun;
if (ccb_h->flags & CAM_CDB_POINTER)
bcopy(csio->cdb_io.cdb_ptr, &r->cmd.scb,
csio->cdb_len < 12 ? csio->cdb_len : 12);
else
bcopy(csio->cdb_io.cdb_bytes, &r->cmd.scb,
csio->cdb_len < 12 ? csio->cdb_len : 12);
scsi_ulto3b(csio->dxfer_len, r->cmd.len);
if (csio->dxfer_len > 0
&& (ccb_h->flags & CAM_DIR_MASK) == CAM_DIR_OUT) {
/* we already rejected physical or scattered addresses */
bcopy(csio->data_ptr, r->buf, csio->dxfer_len);
}
scsi_ulto3b(csio->dxfer_len ? WDSTOPHYS(wp, r->buf) : 0, r->cmd.data);
if ((ccb_h->flags & CAM_DIR_MASK) == CAM_DIR_IN)
r->cmd.write = 0x80;
else
r->cmd.write = 0x00;
scsi_ulto3b(0, r->cmd.next);
outb(base + WDS_HCR, WDSH_IRQEN | WDSH_DRQEN);
c = WDSC_MSTART(r->ombn);
if (wds_cmd(base, &c, sizeof c) != 0) {
device_printf(wp->dev, "unable to start outgoing mbox\n");
wp->dx->ombs[r->ombn].stat = 0;
wdsr_ccb_done(wp, r, r->ccb, CAM_RESRC_UNAVAIL);
return;
}
DBG(DBX "wds%d: enqueued cmd 0x%x, r=%p\n", unit,
r->cmd.scb[0] & 0xFF, r);
smallog3('+', ccb_h->target_id + '0', ccb_h->target_lun + '0');
}
