caddr_t
xtalk_pio_addr(vertex_hdl_t dev, /* translate for this device */
device_desc_t dev_desc, /* device descriptor */
iopaddr_t addr, /* starting address (or offset in window) */
size_t byte_count, /* map this many bytes */
xtalk_piomap_t *mapp, /* where to return the map pointer */
unsigned flags)
{ /* PIO flags */
xtalk_piomap_t map = 0;
caddr_t res;
if (mapp)
*mapp = 0; /* record "no map used" */
res = xtalk_piotrans_addr
(dev, dev_desc, addr, byte_count, flags);
if (res)
return res; /* xtalk_piotrans worked */
map = xtalk_piomap_alloc
(dev, dev_desc, addr, byte_count, byte_count, flags);
if (!map)
return res; /* xtalk_piomap_alloc failed */
res = xtalk_piomap_addr
(map, addr, byte_count);
if (!res) {
xtalk_piomap_free(map);
return res; /* xtalk_piomap_addr failed */
}
if (mapp)
*mapp = map; /* pass back map used */
return res; /* xtalk_piomap_addr succeeded */
}
int
pic_attach(vertex_hdl_t conn_v)
{
int rc;
bridge_t *bridge0, *bridge1 = (bridge_t *)0;
vertex_hdl_t pcibr_vhdl0, pcibr_vhdl1 = (vertex_hdl_t)0;
pcibr_soft_t bus0_soft, bus1_soft = (pcibr_soft_t)0;
vertex_hdl_t conn_v0, conn_v1, peer_conn_v;
PCIBR_DEBUG_ALWAYS((PCIBR_DEBUG_ATTACH, conn_v, "pic_attach()\n"));
bridge0 = (bridge_t *) xtalk_piotrans_addr(conn_v, NULL,
0, sizeof(bridge_t), 0);
bridge1 = (bridge_t *)((char *)bridge0 + PIC_BUS1_OFFSET);
PCIBR_DEBUG_ALWAYS((PCIBR_DEBUG_ATTACH, conn_v,
"pic_attach: bridge0=0x%x, bridge1=0x%x\n",
bridge0, bridge1));
conn_v0 = conn_v1 = conn_v;
/* If dual-ported then split the two PIC buses across both Cbricks */
if ((peer_conn_v = (pic_bus1_redist(NASID_GET(bridge0), conn_v))))
conn_v1 = peer_conn_v;
/*
* Create the vertex for the PCI buses, which we
* will also use to hold the pcibr_soft and
* which will be the "master" vertex for all the
* pciio connection points we will hang off it.
* This needs to happen before we call nic_bridge_vertex_info
* as we are some of the *_vmc functions need access to the edges.
*
* Opening this vertex will provide access to
* the Bridge registers themselves.
*/
/* FIXME: what should the hwgraph path look like ? */
rc = hwgraph_path_add(conn_v0, EDGE_LBL_PCIX_0, &pcibr_vhdl0);
ASSERT(rc == GRAPH_SUCCESS);
rc = hwgraph_path_add(conn_v1, EDGE_LBL_PCIX_1, &pcibr_vhdl1);
ASSERT(rc == GRAPH_SUCCESS);
PCIBR_DEBUG_ALWAYS((PCIBR_DEBUG_ATTACH, conn_v,
"pic_attach: pcibr_vhdl0=%v, pcibr_vhdl1=%v\n",
pcibr_vhdl0, pcibr_vhdl1));
/* register pci provider array */
pciio_provider_register(pcibr_vhdl0, &pci_pic_provider);
pciio_provider_register(pcibr_vhdl1, &pci_pic_provider);
pciio_provider_startup(pcibr_vhdl0);
pciio_provider_startup(pcibr_vhdl1);
pcibr_attach2(conn_v0, bridge0, pcibr_vhdl0, 0, &bus0_soft);
pcibr_attach2(conn_v1, bridge1, pcibr_vhdl1, 1, &bus1_soft);
/* save a pointer to the PIC's other bus's soft struct */
bus0_soft->bs_peers_soft = bus1_soft;
bus1_soft->bs_peers_soft = bus0_soft;
PCIBR_DEBUG_ALWAYS((PCIBR_DEBUG_ATTACH, conn_v,
"pic_attach: bus0_soft=0x%x, bus1_soft=0x%x\n",
bus0_soft, bus1_soft));
return 0;
}
